How it Works
Planar
Loading...
ContentSmart MP70 OPS
User Manual
44 pgs3.64 Mb0

Planar ContentSmart MP70 OPS User Manual

Planar ContentSmart Media Player MP70 OPS User Manual
Contents
1
Overview ............................................................................................................................................................ 3
1.2 Package Contents ........................................................................................................ 4
1.3 Installation ...................................................................................................................... 4
1.3.1 Mounting .............................................................................................................................. 4
1.4 Physical View ................................................................................................................. 5
1.4.1 Physical features ................................................................................................................ 5
2
Configuring the Player .................................................................................................................................. 6
2.1 System Connections ................................................................................................... 6
2.2 Basic Settings ................................................................................................................ 7
2.3 Connect the Player to Your Network .................................................................... 8
2.3.1 Wireless connection ......................................................................................................... 8
2.3.2 Static IP – manually assign network IP address ..................................................... 9
2.3.3 Wired connection ............................................................................................................ 10
2.3.4 Proxy settings ................................................................................................................... 11
2.3.5 Show IP settings .............................................................................................................. 13
2.4 Time Zone Settings .................................................................................................. 14
2.7 Content Configuration – AppStart ..................................................................... 18
2.8 Content Configuration – FailSafe ........................................................................ 19
2.9 Content Configuration – EasyPlay ...................................................................... 20
2.10 Display Settings ...................................................................................................... 24
2.11 Sound Settings ........................................................................................................ 27
2.12 System Configuration – Player Name ............................................................. 28
2.13 System Configuration – Security ...................................................................... 29
2.14 System Configuration – Time Server .............................................................. 30
2.15 System Configuration – Scheduled Reboot ................................................. 30
2.17.1 Manual Expansion ..................................................................................................... 33
2.17.2 Auto Expansion .......................................................................................................... 34
2.18 System Configuration - Factory Reset ............................................................ 35
2.18.1 Using the reset button ............................................................................................ 35
2.18.2 Using a USB mouse ................................................................................................... 35
2.19 System Configuration – Power Save ............................................................... 36
3
Content Management ................................................................................................................................ 37
4
Authoring in HTML5 .................................................................................................................................... 37
5
Working with SMIL ....................................................................................................................................... 37
5.1 Introduction ................................................................................................................ 37
5.2 www.a-smil.org for Developers ........................................................................... 38
6
MP70 OPS Specifications ........................................................................................................................... 38
7
Technical Support......................................................................................................................................... 39
7.1 FAQ ................................................................................................................................ 39
7.2 Planar Support ........................................................................................................... 42
7.2.1 Cables and Accessories ................................................................................................. 42
7.2.2 Contact Planar .................................................................................................................. 42
Planar ContentSmart MP70 OPS User Manual 2
1.1
This document describes the hardware operation of the Planar® ContentSmart™ Media Player MP70 OPS, system set-up and frequently asked questions.
Feature Highlights
The Planar ContentSmart MP70 OPS is a UHD (3840 x 2160) high definition digital signage media player featuring industrial-grade OPS format mechanical design and versatile open-standard HTML5 and SMIL programmability.
• Power / Status LED indicator
• 3.5mm composite Audio output
• Ethernet port for network content update
1
Overview
• Wireless antenna post
• JAE Connector for display mountingAV in for custom live content display
• Hardware decoding of MPEG1/2/4, H.264, H.265, and VC-1 media formats
• 8GB on-board flash local storage with Micro SD expansion slot with SD card cover
• 2 USB ports for USB content update and configuration
• S/W Reset button to perform factory reset
• Built-in wireless b/g/n network
• Support for HTML5 widgets for dynamic content (W3C Widgets standard)
• Industry leading W3C SMIL support for developers
• Supports full POPAI Screen Media Formats Standards profiles S1 to S12, and E1 to E8
Planar ContentSmart MP70 OPS User Manual 3
Media Player Unit
Wi-
Fi Antenna
1.2
Package Contents
1.3
Installation
NOT INCLUDED: A USB mouse is required for system setup
1.3.1
ATTACH the wireless antenna as shown in figure below. Screw antenna clockwise onto the post.
PLUG the player into the OPS slot of the monitor and push until it is securely plugged in the display.
Mounting
Micro SD
Planar ContentSmart MP70 OPS User Manual 4
1.4
Physical View
1.4.1
• Power/Status LED indicator
• 3.5mm composite Audio output
• Ethernet port for network content update
• Wireless antenna post
• Micro SD card slot with SD card cover
• USB ports for USB content update and configuration
• S/W Reset button to perform factory reset
• JAE Connector for display mounting
Physical features
Planar ContentSmart MP70 OPS User Manual 5
2.1
System Connections
Connect to a monitor via an OPS slot.
Attach the AC power adapter to power on the unit. After approximately 15 seconds, the booting animation will be displayed on screen as shown below:
2
Configuring the Player
Figure 2.1.1
The boot-up process takes approximately 40 seconds to complete.
Figure 1.1.2
After boot-up completes, player will stay in Basic settings menu if no content service has been configured (i.e. first boot-up for brand new unit or after a factory reset).
Planar ContentSmart MP70 OPS User Manual 6
2.2
Note: If you have already sent content to the player, content will play back
automatically 15 seconds after boot-up.
Basic Settings
A USB mouse must be attached to the player to configure settings. If the display has a HID­compliant touch screen, a USB mouse is not required and all the click action can be replaced by
tap actions.
Figure 2.2.1
Basic Settings:
Network Time zone Content
Each time the Basic settings menu is entered, playback will automatically begin after 15 seconds if content services have been previously set. Auto playback can be canceled by clicking on the button before the countdown ends.
User is able to enter Advanced Settings by clicking the Advanced button.
To enter the menu system at any time during playback, plug in a USB mouse and hold the left mouse key in the corner area as shown below for 10 seconds. If the player has touch screen, tapping and holding in the corner areas for 10 seconds will also bring you to the menu.
Figure 2.2.2
Note: Player will ask for password if password has been configured.
Planar ContentSmart MP70 OPS User Manual 7
2.3
Connect the Player to Your Network
2.3.1
Click the Wireless LAN setting to launch the wireless configuration UI.
Figure 2.3.1
Click the ON/OFF button as indicated below to turn ON Wireless interface (network).
Wireless connection
Figure 2.3.2
The player will scan for wireless signals nearby and available access points will be listed.
Planar ContentSmart MP70 OPS User Manual 8
Figure 2.3.3
Click on the network ID to connect. If the network requires authentication, you will be asked to provide a password.
Figure 2.3.4
2.3.2
Static IP – manually assign network IP address
1
Check the box that says "Show advanced options"
Planar ContentSmart MP70 OPS User Manual 9
Figure 2.3.5
Click down arrow to hide keyboard if needed.
You can also scroll down/ swipe to see the rest of the menu.
2
Under IP settings, change DHCP to Static.
Figure 2.3.6
3
Fill the form and click Connect to complete the setting.
(Scroll down/ swipe to see the rest of the menu if needed)
Figure 2.3.7
2.3.3
Wired connection
To use the wired Ethernet connection, connect an Ethernet cable. Ethernet connection takes priority over wireless connection.
DHCP – Automatically assign network IP address
Planar ContentSmart MP70 OPS User Manual 10
1
Turn on Ethernet by checking the “Use Ethernet” box. If using DHCP, no further action is required.
Figure 2.3.8
Static IP – Manually assign network IP address
1
Click Static IP Settings to configure static IP address.
Figure 3
2.3.4
1
In Basic settings, click the Advanced button and the advanced configuration menu will be launched.
Proxy settings
Planar ContentSmart MP70 OPS User Manual 11
Figure 4.10
2
Click Network, then click Advanced.
Figure 2.3.11
3
Proxy setting menu will be launched. Input proxy hostname and port, then click Done to finish configuration.
Planar ContentSmart MP70 OPS User Manual 12
Figure 2.3.12
2.3.5
1
In Basic settings, click the Advanced button and the advanced configuration menu will be launched.
2
Click Network, then click Show IP.
Show IP settings
(Figure 12)
Figure 2.3.13
3
This feature is to control whether the IP address is displayed in the Basic settings menu. This is enabled by default. When disabled, basic settings will display “connected” instead of the assigned IP address.
Figure 2.3.14
Planar ContentSmart MP70 OPS User Manual 13
Loading...
+ 30 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use