PS760D Quick Installation Guide
NO. A-1
B-1
Quantity 3 4 / 4
Screws
A-2
B-2
3
1
<English>
1. Hardware Connection
Physical Connection
1. Be sure that your PC or laptop has connected to your local Ethernet network(HUB or Switch).
2. Be sure that IP Camera has connected to your local networking via the LAN port (RJ45) on the extension cable.
(For PoE model, user can use PoE Switch as power supply)
3. Plug the jack of power adaptor into power jack on the extension cable.
4. Ensure the power adaptor specification matches the power system (110V or 220V) and plug the adaptor into the
outlet. (This step is optional if used PoE switch for PoE model)
5. Use CAM FINDER software in CD to allocate your camera in networking, and launch browser to start connecting
with PC.
Dual Lens Panoramic
Dome Network Camera
Bracket Installation
Wall Mount & Ceiling Mount
Install the Bracket(B-2) by
Step 1
applying the Screw(B-1)*4pcs.
Figure I
Align and insert the 4 screw
pins to the 4 anchor points of
Step 2
the bracket correspondingly.
Rotate clockwise to fix the camera.
Figure II
Pins Definition
PS760D provides extra connections with outside devices. User can apply the integrated functional cable for GPIO
and External IR Board.
Please refer to the following table of pins definition respectively:
1
In-Ceiling Mount
Loose the 4 screws of cover and
Step 1
remove the cover.
Figure I
Take Screw(A-1)*3pcs. Insert each
screw through the pan and then
Step 2
the Bracket(A-2).
Figure II
Step 3
Figure III
Concurrently squeeze the
Bracket(A-2)*3pcs into the ceiling
mezzanine. Tighten the 3 screws
to securely fasten the camera.
Finally, install the camera cover.
53IT-00000137
V1.02
PS760D Quick Installation Guide
PS760D Quick Installation Guide
PS760D Quick Installation Guide
PS760D Quick Installation Guide
<English>
2. Software Installation
CAM FINDER software utility installation is required for finding out your camera on local network that you can launch
camera web pages via Internet Browser or do some basical setting directly without camera web pages.
The programs are located in the Software Package CD provided together with the device. When this CD inserts into
CD-ROM Drive, it will launch utility application automatically.
Click “software Utility” button and then you can find CAM FINDER setup file. Launch it and complete installation step
by step.
3. Network Configuration
CAM FINDER is a utility that provides an easier and more efficient way to configure the IP address and network settings
of the devices. It provides a convenient way to set the network settings for multiple devices simultaneously using the
batch setting function. Moreover, CAM FINDER can save the network settings for all devices as a backup and restore
them when necessary.
Using CAM FINDER to Assign IP Address
1. Once CAM FINDER has been successfully installed on the PC, double click Mouse left button to run the
software.
Dual Lens Panoramic
Dual Lens Panoramic
Dual Lens Panoramic
Dual Lens Panoramic
Dome Network Camera
Dome Network Camera
Dome Network Camera
Dome Network Camera
5. Modify the relative network settings of Static IP Address. Or click “Use DHCP Service” to get IP Address automatically.
6. After modifying the camera properties, click [Set] button to save and enable the configuration modifications.
7. Using extra “SHIFT” key on keyboard to select multiple items. Click right button of mouse to the selected item and click
the [Batch Device Setting] to set several devices. By this tool, you can batch modify IP address automatically.
2. Click the [Device Search] on the top of Window to search the camera on the network.
(Note: Be sure that the camera has connected to network and power ON before doing that.)
3. From the list, select the device with the MAC Address that corresponds to the Camera that is to be configured.
4. Double click the select item to open the Property Page or click right button of mouse to the selected item and
select the [Single Device Setting].
1
3
1
3
8. Language supports for Chinese (Traditional and Simplified), English and Spanish.
53IT-00000137
V1.02
V1.04
V1.02
V1.04
Loading...