1
BLUETOOTH® SPEAKER
USER MANUAL
YM-C06
*
The picture is only provided for reference. Please refer to the actual
unit!
2
GETTING STARTED
To make a correct use of the functions and know well about the
system connection and usage, please read this user's manual carefully
before using the product. Keep this manual in a safe place for future
reference.
INTRODUCTION
This Bluetooth® speaker will allow you to listen to your music
wirelessly from your mobile phone, tablet or other Bluetooth® enabled
device. It delivers powerful and clear sound. The built-in microphone
allows you to answer calls from mobile phone.
SAFETY INSTRUCTIONS
Do not insert any metal object in the device.
To avoid a static charge, do not use the device in an extremely dry
climate.
Do not attempt to open or repair the device yourself.
Avoid heavy shocks to the product and do not drop it.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
INTRODUCTION OF PRODUCT PANEL AND
FUNCTIONS
1. On/Off switch 2. PREV
3. Multifunction button : Play/Pause/Mode (Switch between Bluetooth
and TF card playing)
4. NEXT 5. Vol- 6. Vol+
7. Micro USB charging port
8. TF card slot
9. AUX input
Box content
YM-C06 Speaker
Micro USB charging cable
AUX input cable
User's manual
4
CHARGING THE BLUET OOTH® SPEAKER
Connect the micro USB port of the USB charging cable into the USB
port on the side of the speaker. Connect the other end of the USB
cable to your computer’s USB port or an USB wall charger (not
included)
The LED indicator turns RED, indicating the battery is being charged.
The LED indicator will turn off when the speaker is fully
charged. (Approximately 3 hours).
PAIRING THE SPEAKER WITH A BLUETOOTH®
ENABLED DEVICE
Keep your Bluetooth® Speaker and Bluetooth® enabled device within
1 meter of each other during the pairing process.
Turn on your Bluetooth® Speaker. The LED light on the front of the
speaker flashes. Your speaker is now in Pairing Mode.
Set your Bluetooth® enabled device to search for Bluetooth® devices.
When the device finds the YM-C06, select it. Select “Pair” to connect
the Bluetooth® Speaker to your bluetooth enabled device.
Depending on which device you are trying to connect the speaker to, it
may be necessary to enter a passcode. Enter passcode “0000” if
prompted by the device.
Your Bluetooth® enabled device will confirm that the pairing was
completed, and prompt you to accept the connection. Please respond
YES to connect the Bluetooth® Speaker to your Bluetooth® enabled
device.
Note : Once the speaker is paired and connected to your Bluetooth®
device, it will automatically connect the next time as long as the
Bluetooth® on your device is turned on.
5
USING YOUR BLUETOOTH® SPEAKER
PLAYING MUSIC
To enjoy wireless music on your Bluetooth® Speaker, make sure you
are connected to a Bluetooth® enabled device. Once connected you
can press PLAY on your Bluetooth® device or you can press the
M button on the YM-C06 speaker. Once the music is playing, you can
control it from the control buttons of the YM-C06 speaker.
Volume control
Press the “+” or the “-” button to adjust the volume in the desired level.
Note : You may also adjust the volume from your Bluetooth® enabled
device's volume control.
Play/Pause
Press the M button to pause the music. To resume the music, press this
button again.
Changing Songs (with devices that have AVRCP Bluetooth® profile)
Press the “>” button to go to the next song.
Press the “<” button to go to the previous song.
TELEPHONE BUTTON FUNCTIONS
Note : You may answer & end call while listening to music. The music
will stop when a call is answered, and will restart when the call is
ended.
Answer / End a call :
To answer a call: Short press the M button.
To end a call: Short press the M button again.
To reject a call: Press and hold the M button for about 2 seconds.
To make a new call: Dial the number and press the SEND button on
your mobile phone, the call is automatically transferred to the speaker.
6
To redial the last number called : Press the M button twice quickly.
The last number called will be redialed.
TECHNICAL SPECIFICATIONS
Bluetooth® version: 3.0
Working distance: up to 10 meters in open space
Supporting Profiles: AVRCP, A2DP, Hands-Free Profile (HFP)
and Headset Profile (HSP)
Frequency range: 2.4-2.48Ghz
Output power: 2x3Watts
Distortion: ≤ 1.0%
Frequency response: 180Hz – 20Khz
Hands-free function for answering calls from mobile
Microphone sensitivity: -40dB
Playback time: Music time 6 hours, talk time 10 hours
Charging input power: DC 5V (micro USB)
Charging time: Approx 3 hours
Unit size: 196 x 76 x 79 mm
Unit weight: approx. 332g.
Note: Battery life & charging time may vary, based on usage & types
of devices used.
The product design and specifications may be changed without prior
notice!
7
FCC Statement:
This equipment has been tested and found to comply with the
limits for a Class B digital dev i ce, pursu ant to p art 15 o f the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures :
•Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
This device complies with part 15 of the FCC rules. Ope ra tion is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
8
undesired operation.
Note: Modifications to this product will void the use r’s authority
to operate this equipment.
Loading...