Pixel Magic PE1000-Pro Owner's Manual
PRODUCT
MANUAL
Video Processor / Scaler PE1000 Pro
Table of Contents
Introduction 3
1 Overview
®
About Plasma Enhancer
Installation and Setup Overview 5
Familiarizing with Plasma Enhancer
Front Panel 6
Rear Panel 7
Remote Controls
Full Feature Remote Control 8
Spouse Friendly
2 Installation 10-13
Hardware Installation 10
Compatible Equipment 10
Power Connection 11
Display Device Connection 11
AV Device Connection 12
Antenna Connection 13
Audio Out Connection 13
Product Registration 13
PE1000-Pro 4
®
PE1000-Pro
™
Remote Control - TV Commander 9
3 Basic System Setup 14-17
Image Setup 14
Display Setup 15
TV Setup 16
System Setup 17
4 Advanced Setup 18-21
Image Setup 18
Input Select 18
Picture 18
Aspect Ratio 18
Deinterlacer 18
Overscan 18
Y/C Delay 19
Noise Reducer 19
TrueLife 19
NLS Config 19
Position 19
Profile 19
1
Table of Contents
System Setup 20
Pixel Magic System 20
SDI Polarity 20
Spouse Remote 20
Audio Mapping 20
AV1 Config 20
SCART Config 20
VGA Config 20
Analog Output 21
Audio Channel 21
Pass Through Mode 21
Information 21
TV Commander 21
Show Advanced Option 21
Factory Setting 21
5 Important Information 22-25
Troubleshooting 22
Technical Specifications 23
Safety Information 24
Support and Warranty Information 25
Introduction
Thank you for purchasing the Plasma Enhancer
most powerful video processing technologies by Pixel Magic Systems. This
product will deliver a high performance processing and scaling for the most
life-like picture quality and superb viewing experience of home theatre.
The carton of your Plasma Enhancer
1. Plasma Enhancer
®
PE1000-Pro Video Processor
®
should contain the following items:
2. Full Feature Remote Control
3. Spouse Friendly
®
Remote Control
4. Transformer with mains power le ad
5. Pixel Magic DVD
6. Rack mounting brackets
7. Audio and Video Cable
8. Plasma Enhancer
®
PE1000-Pro Product Manual
®
PE1000-Pro, featuring the
Please contact your Plasma Enhancer
®
retailer immediately if any of the above
item missing.
This product manual will help you to get familiarizing with your new Plasma
Enhancer
® ®
Pro, setup and configure your Plasma Enhancer Pro, and provide
you the information on how to connect and use it with your AV devices.
The Technical Specifications section at the end of this user guide summarizes
the key features and performance of the Plasma Enhancer
®
Pro.
Should you have any questions during the setup or operation of this Plasma
Enhancer
® ®
Pro, you should first contact your authorized Plasma Enhancer
reseller for assistance. You can also contact Pixel Magic Systems directly for
technical assistance:
Email
info@pixelmagicsystems.com
Web www.pixelmagicsystems.com
Enjoy!
3
Overview
About Plasma Enhancer® PE1000-Pro
Special Features include: Special Features include:
Plasma Enhancer
designed to enhance video quality of Plasma TVs, LCD TVs, Projectors and
RPTVs.
®
is a high performance video processor / scaler specially
z SDI-input
z DCDi
z Philips MK5
™
TM
high quality
analog tuner
z Off-Air-Noise Terminator
z Spouse Friendly
™
remote
control
z TV Commander™
z Pixel Magic System
z TrueLife
™
™
Plasma Enhancer
®
comprises cutting edge digital video transmission,
processing, scaling and format conversion technologies to deliver
unprecedented high quality video in home theaters.
™
Major technologies including Genesis Microchip’s Emmy award winning DCDi
and TrueLife
and outstanding picture quality. Not only that, Plasma Enhancer
with the new Philips 5
®
are employed to provide impressive de-interlaced processing
®
is equipped
th
generation high quality analog TV tuner MK5™.
®
Boasting a best-in-class noise figure of less than 5dB throughout the frequency
range, and with improved selectivity, Plasma Enhancer offers crystal clear
analog TV reception quality.
Video Sources Display Devices
Installation and Setup Overview
Overview
To install and set up your Plasma Enhancer
®
PE1000-Pro, you can follow our
installation guidelines in this manual. The basic 5 key steps include:
1 Display Device Connection: Connect your Plasma Enhancer® to your
display device(s) i.e. Plasma TV, LCD TV with reference to section 2,
Hardware Installation. An On-Screen Display (OSD) menu will be
shown on your display device for your setup.
2 AV Devices Connection: Connect your AV device(s) i.e. DVD Player,
TV cable box to your Plasma Enhancer
®
with reference to section 2,
Hardware Installation.
3 TV Setup: Connect a TV cable or antenna to your Plasma Enhancer
with reference to section 2, Hardware Installation and section 3, Basic
®
System Setup.
4 Plasma Enhancer Configuration: Configure your Plasma Enhancer
with reference to section 3, Basic System Setup, and section 4,
Advanced Setup.
5 Registration: Register your Plasma Enhancer
®
at
www.pixelmagicsystems.com to enjoy official warranty, technical
support, and software update from Pixel Magic Systems Ltd.
!!Caution!!
Ensure ALL devices are switched OFF before connecting your audio and
video systems to your Plasma Enhancer
®
Refer to this product manual from time to time for detailed connection and set
up instructions in addition to correspond to our safety precautions.
®
5
Overview
Familiarizing with Plasma Enhancer® PE1000-Pro
Plasma Enhancer PE1000-Pro Front Panel
8
7
®
4 2 3 1 6 5
Front Panel Features
1 Power indicator LED
2 Digital 1 Pass Thru
indicator LED
Green - running mode
Red - standby mode
ON - HDMI Digital 1 In video pass through
3 Digital 2 Pass Thru
indicator LED
4 Analog Pass Thru
indicator LED
5 Film indicator LED
6 IR indicator LED
7 4-Digit LED display
8 AV3: video audio input
ON - HDMI Digital 2 In video pass through
ON - Analog In video pass through
ON - Film mode enabled
Flashing white when receiving signal from the remote
control
Display status of your Plasma Enhancer
S-Video / Composite video and stereo audio input
®
Familiarizing with Plasma Enhancer® PE1000-Pro
Overview
Plasma Enhancer PE1000-Pro Rear Panel
®
15 14
13
Rear Panel Features
1 Power switch
2 Power supply cable
entry
VIDEO / AUDIO INPUTS
1 - Switch ON
0 - Switch OFF
Connect with the supplied transformer to your Plasma
Enhancer
®
4 5 11 7 6 8 12 9 10
3 2 1
3 RF In
4 AV1: video audio input
5 AV2: SCART input
6 Analog In
7 SDI In
8 Digital 1 & 2 In
VIDEO / AUDIO OUTPUTS
9 Analog Out
10 Digital Out
11 Audio Out
OTHER CONNECTIVITY
12 IR Emitter
13 USB port
Antenna / 75-ohm coaxial input for analog TV tuner:
European (PAL & SECAM) or NTSC
S-Video / Composite / Component with stereo audio
SCART input configurable as S-Video / RGBS /
Component / Composite with stereo audio & aspect ratio
auto-detection via pin 8 (only applicable to some DVD
players)
HDTV analog input for pass-through via DB15
Serial Digital Interface input
HDMI (HDCP, video only) inputs x 2 for 480p/576p
processing and HDTV passthrough
Analog video out via DB15 connector – The DB15 analog
output can also be used as component (YPbPr) video
outputs (via optional adaptor)
HDMI digital video out (HDCP, video only)
Stereo audio out
Infrared output jack to connect to an external infrared
transmitter (not included)
For Plasma Enhancer® future upgrade use
14 RJ45 Ethernet
Reserved for future application
connection
15 RS232 DB9 male serial
Connection
For integration of Plasma Enhancer® into home theater
control systems
7
Loading...