Pixel Magic PE1000 Owner's Manual
PRODUCT
MANUAL
Video Processor / Scaler PE1000
Table of Contents
Contents
1 Introduction 3
About Plasma Enhancer® PE1000 4
Installation and Setup Overview 5
Familiarizing with Plasma Enhancer® PE1000
Front and Side Panels 6
Rear Panel 7
Remote Controls
Full Feature Remote Control 8
®
Spouse Friendly
2 Installation 10-14
Hardware Installation 10
Compatible Equipment 10
Power Connection 11
Remote Control - TV Commander 9
Display Device Connection 11
AV Device Connection 12
Antenna Connection 12
Alternative AV Receiver / Processor Connection 13
Audio Out Connection 14
Product Registration 14
3 Basic System Setup 15-17
Image Setup 15
Display Setup 16
TV Setup 17
System Setup 18
4 Advanced Setup 19-21
Image Setup 19
Input Select 19
Picture 19
Aspect Ratio 19
Deinterlacer 19
Overscan 19
Y/C Delay 20
Noise Reducer 20
TrueLife 20
NLS Config 20
Position 20
Profile 20
1
Contents
Table of Contents
System Setup 21
Spouse Remote 21
Audio Mapping 21
AV1 Config 21
Analog Output 21
Audio Channel 21
Information 21
TV Commander 22
Show Advanced Option 22
Factory Setting 22
5 Important Information 23-26
Troubleshooting 23
Technical Specifications 24
Safety Information 25
Support and Warranty Information 26
6 Note 27
Introduction
Thank you for purchasing the Plasma Enhancer PE1000, featuring the most
powerful video processing technologies by Pixel Magic Systems. This product
will deliver a high performance processing and scaling for the most life-like
picture quality and a superb home theatre viewing experience.
The carton of your Plasma Enhancer
1. Plasma Enhancer
®
PE1000 Video Processor
®
should contain the following items:
2. Full Feature Remote Control
3. Spouse Friendly
®
Remote Control
4. Transformer with mains power le ad
®
5. Plasma Enhancer
® Vertical Stand
6. Audio and Video Cable
®
7. Plasma Enhancer
PE1000 Product Manual
Please contact your Plasma Enhancer
®
retailer immediately if any of the above
items are missing.
This product manual will help to familiarize with the; set-up, configuration, AV
device connection, and operation of your Plasma Enhancer
®
.
The Technical Specifications section at the end of this user guide summarizes
the key features and performance of the Plasma Enhancer
®
.
Should you have any questions during the setup or operation of this Plasma
Enhancer
® ®
, you should first contact your authorized Plasma Enhancer reseller
for assistance. You can also contact Pixel Magic Systems directly for technical
assistance:
Email
info@pixelmagicsystems.com
Web www.pixelmagicsystems.com
Enjoy!
3
Overview
About Plasma Enhancer® PE1000
Plasma Enhancer
®
is a high performance video processor / scaler specially
Special Features include:
Special Features include:
z DCDi
z Philips MK5
z Off-Air-Noise Terminator
z Spouse Friendly
z TV Commander
z TrueLife
™
analog tuner
control
™
TM
high quality
™
remote
™
™
designed to enhance video quality of Plasma TVs, LCD TVs, Projectors and
RPTVs.
Plasma Enhancer
®
comprises cutting-edge digital video transmission,
processing, scaling and format conversion technologies to deliver
unprecedented high quality video in home theaters.
Major technologies including Genesis Microchi p’s Emmy award winning DCDi
and TrueLife
and outstanding picture quality. Not only that, Plasma Enhancer
with the new Philips 5
™
are employed to provide impressive de-interlaced processing
®
is equipped
th ™
generation high quality analog TV tuner MK5 .
™
Boasting a best-in-class noise figure of less than 5dB throughout the frequency
range, and with improved selectivity, Plasma Enhancer
®
offers crystal clear
analog TV reception quality.
Video Sources Display Devices
Installation and Setup Overview
Overview
To install and set up your Plasma Enhancer
®
PE1000, you can follow our
installation guidelines in this manual. The basic 5 key steps include:
1 Display Device Connection: Connect your Plasma Enhancer® to your
display device(s) i.e. Plasma TV, LCD TV with reference to section 2,
Hardware Installation. An On-Screen Display (OSD) menu will be
shown on your display device for your setup.
2 AV Devices Connection: Connect your AV device(s) i.e. DVD Player,
TV cable box to your Plasma Enhancer
®
with reference to section 2,
Hardware Installation.
3 TV Setup: Connect a TV cable or antenna to your Plasma Enhancer
with reference to section 2, Hardware Installation and section 3, Basic
®
System Setup.
4 Plasma Enhancer Configuration: Configure your Plasma Enhancer
with reference to section 3, Basic System Setup, and section 4,
Advanced Setup.
5 Registration: Register your Plasma Enhancer
®
at
www.pixelmagicsystems.com to enjoy official warranty, technical
support, and software update from Pixel Magic Systems Ltd.
!!Caution!!
Ensure ALL devices are switched OFF before connecting your audio and
video systems to your Plasma Enhancer
®
Refer to this product manual as and when required for detailed connection and
set up instructions, in addition to our corresponding safety precautions.
®
5
Overview
Familiarizing with Plasma Enhancer® PE1000
Plasma Enhancer PE1000 Front and Side Panels
4
®
3
2
6
1
5
Front Panel Features
1 Power indicator LED
2 IR indicator LED
3 Film indicator LED
4 4-Digit LED display
Green - running mode
Red - standby mode
Red - Receiving signal from remote control
Blue - Film mode enabled
Display current status of the system
5 AV3: video audio input
Plasma Enhancer
6
®
vertical stand
S-Video / Composite video with stereo audio input
For placing your Plasma Enhancer® vertically
Familiarizing with Plasma Enhancer® PE1000
Overview
Plasma Enhancer PE1000 Rear Panel
5
6
7
®
9
8
3
4
2 1
Rear Panel Features
1 Power supply cable
entry
VIDEO / AUDIO INPUTS
2 RF In
3 AV1: video audio input
4 AV2: video audio input
VIDEO / AUDIO OUTPUTS
5 DVI Out
6 Analog Out
7 Audio Out
Connect with supplied transformer to your Plasma
Enhancer
Antenna / 75-ohm coaxial input for analog TV tuner:
European (PAL & SECAM) or NTSC
Component / S-Video / Composite with stereo audio
S-Video with stereo audio
DVI-D digital video out
Analog video out via DB15 connector – The DB15 analog
output can also be used as component (YPbPr) video
outputs (via optional adaptor)
Stereo audio out
®
OTHER CONNECTIVITY
8 IR Emitter
9 USB, RS232 & RJ45
Infrared output jack to connect to an external infrared
transmitter (not included)
RS232: For integration of Plasma Enhancer® into home
theatre control systems
USB & RJ45: Reserved for future application
7
Loading...