Page 1
Firmware Upgrade Instruction
By Pixel Magic Systems Ltd.
INSTRUCTIONS
1. Download the new firmware zip file and unzip it.
2. Prepare a USB flash disk with the unzipped upgrade files stored inside
the root directory.
3. Plug the USB flash drive onto C2, turn on C2 if it is not already on.
4. On the front panel status page, press [OK] to display the main menu;
and then Select "System", and then select "Firmware Upgrade". Or on
the OSD, select "System", "Firmware Upgrade" and "Continue" to start
the upgrade process.
5. During the upgrade process you can see progress status on the front
panel LCD, and the system will reboot automatically after the process
completed.
WARNING
- Do not turn off Crystalio II during the upgrade process. The upgrade
process should be completed within 30 minutes.
- If upgrading from version below 1.06, the system will need to perform full
factory reset and all user settings will be lost. In this case you may need to
write down the settings needed to be kept.
1
Loading...