3
2
4
5
6
7
8
8
1
9
10
4GHz
2.
LED Continuous Light
11
PIXAPRO® LED 100T & 100D Studio Light
Introduction:
The PIXAPRO® LED 100 series studio lights uses the latest in high powered LED technology. It
has a high luminous efficiency (up to 90%), the LEDs are long lasting (rated at more 30,000 hours)
and energy efficient. The PIXAPRO® LED 100 series uses integrated LED lights.
The PIXAPRO® LED 100 series studio lights are compatible with any S-Type bayonet fitting
accessory such as Softboxes, reflectors and beauty dishes etc. This LED lighting system can be used
in a wide range of applications including, TV and Video Production, and digital stills photography
Specifications:
Diagram
Model:
PIXAPRO® LED 100D
PIXAPRO® LED 100T
Voltage
AC 90-240V 50/60Hz
LED Power (W)
100W
Brightness (lm)
>10000
>8000
Color Temperature (K)
5500K±100K
3100K±100K
Wireless Control
Built-In 2.4GHz Radio Remote receiver
Heat sink:
Built-in silent fan
Color Reproduction
Photography level
Dimensions (mm)
390×140×200mm
Weight (kg)
2.7kg
1. Power Switch
2. Power Outlet（With Fuse）
3. Dimmer（Power Indicator）
4. Reflector Lock
5. Digital Display
6. Handle
7. Umbrella Mount
8. Angle Adjustment Handle
9. Lightstand Mount
10. Lamp Hoop
11. LED Panel
How to Use：
1. Power up your PIXAPRO® LED 100 series studio light via the power switch located on the
back of the unit (1), and your current channel code will be shown on the digital display (5). When
the Channel Code is flashing, you can use the dimmer-dial (3) change your current channel. The
channels can be set to either “P0-P9” or “C0-C9”. If you prefer, you can enter the channel display
mode to change your channel settings.
2. Once you have finished setting up your channels, dimmer dial (3) is used to control the light
output
3. The light has built-in 2.4GHz radio remote receiver allowing it to be used in conjunction with the
optional Radio Frequency Wireless Remote Control unit (sold separately).
WARNING：
1. Allow 30minutes to 1 hour cooling time after use. Do not touch the LEDs
and the lamp head as it could cause burns.
2. Be sure to turn off your remote when not in use.
3. When you using the remote to control the lights, please make sure the lights
channel, in order to achieve effect that you want.
4. Keep clean. Be sure to unplug the light when cleaning.
5. When not in use, store light in a cool and dry place.
6. Do not keep the light in direct sunlight or in high temperature. And do not
expose the light to water.
7. Do not use solvents, gasoline, paints, thinners or pesticides in the product.
8. Do not insert metal objects into lamp housing.
9. Do not touch the power cord with wet hands
10. Always hold the plug when unplugging your PIXAPRO® LED 100 series
head (never pull plug out by the cable)
11. Do not attempt to repair the light by yourself unless carried out by a qualified
technician. If you have any problems, please contact your dealer.
Box Content:
PIXAPRO
®
LED 100 Series head
Reflector Dish
Power Cord
Instructions
Optional Accessories:
2.4GHz Radio Remote Control
Diffuser
Softbox
Barn door
Honeycomb
Color Filter etc.
Loading...