Pittsburgh Corning 95841, 95840 User Manual
DIGITAL TORQUE WRENCH
M o d e l
95840
95841
®
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
95840-3/8” 95841-1/2”
Drive 3/8” 1/2”
Net Weight 2.2 Lbs. 2.55 Lbs.
Carbon steel head and tube,
Material
Tool Length 14-3/4” L 17-3/4” L
Head Depth .75” T .75” T
Head Width 1.7” W 1.7” W
Gear Action 10 degrees 10 degrees
Shaft Width 0.87” 0.87”
Maximum Range
Minimum Range
Increments 0.1 0.1
Accuracy
Power Source
The Torque Wrench is certified to have been calibrated prior to shipment to the accuracy of +/4% in the right hand direction and +/- 6% in the left hand direction on readings 20% to 100% of
capacity. On readings below 20% of capacity, the accuracy is +/- two minor scale increments.
thermoplastic LCD read-out,
rubber Handle
83.3 Ft-Lbs./ 1000 In. Lbs.,
m-KG 11.5/ cm - KG 1150/
N-m113
16.0 Ft. Lbs./ 195 In. Lbs., MKG 2.25/ CM -KG 225/
N-m 22.0
3% acceptable variation
through full torque range
3 Volt Battery-CR2032
(included)
Carbon steel head and tube,
thermoplastic LCD read-out,
rubber Handle
150 Ft.-Lbs., 1800 In. Lbs.,
m-Kg 20.7, CM-KG 2070, N-m
203
30.0 Ft. Lbs., 360 In. Lbs., MKg 4.1, CM-KG 410, N-m 40.5
3% acceptable variation
through full torque range
3 Volt Battery CR2032
(included)
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
SKU 95840-95841
For technical questions, please call 1-800-444-3353.
Page 2
1.
Use only 1/2” (95841) or 3/8” (95840) sockets with the torque capability shown
in the specifications chart on prior page. Otherwise, the socket could fly off the
drive anvil or break apart, causing injury.
2.
3.
4.
5.
6.
7.
8.
9.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Keep children away while operating the Digital Torque Wrench. Keep children
out of the work area.
Stay alert. Do not operate the Digital Torque Wrench while tired or under the influ-
ence of drugs, alcohol, or medication.
Do not overload the Digital Torque Wrench. Use the correct tool for your applica-
tion. Do not use it for applications other than intended.
Maintain the Torque Wrench with care. Do not use a damaged Torque Wrench.
Tag a damaged Torque Wrench “Do not use” until repaired.
Torque Wrench service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk
of injury.
When servicing the Torque Wrench, use only identical replacement parts. Fol-
low instructions in the “Inspection and Maintenance” section of this manual.
Use eye and ear protection. Always wear ANSI-approved impact safety goggles
and hearing protection.
10.
11.
12.
13.
14.
15.
Do not use cheater bars or hammers to force the Torque Wrench.
Do not use the Torque Wrench to break a fastener loose.
Always pull a Torque Wrench towards you. Pushing the Torque Wrench may
force it past its maximum capacity and increase the risk of losing control, which
may cause injury.
Maintain tools with care. Make certain that the Torque Wrench has a fresh bat-
tery. Inspect the Torque Wrench periodically and, if damaged, have it repaired by
an authorized technician.
Do not expose this product to rain or wet conditions. Water entering a Digital
Torque Wrench will damage it.
Do not use the Torque Wrench:
If the battery is low
a.
Near any explosive gasses or fumes
b.
If any abnormal operation is detected (if in doubt about the condition of the
c.
Torque Wrench have it serviced)
SKU 95840-95841
For technical questions, please call 1-800-444-3353.
Page 3
Loading...