Pittasoft BlackVue DR3500-FHD User Manual

DR3500-FHD 3

Table of Contents

Introduction to the Manual

4

Getting Started

5 Cautions for Safety

8 Checks for External GPS

8 Checks for the microSD Card

9 Product Features

10 Package Components

11 Names of Each Part

12 How to Attach & Detach the

Mounting Bracket

How to Install the BlackVue

13 Checking Installation Position

13 How to Insert & Remove the

microSD Card

14 Installation

Video Recording

16 Normal Recording

16 Parking Mode Recording

17 Event Recording

Simple Video Playback

18 How to Playback using a microSD

Card

How to use the BlackVue

20 Installation & Execution

Software

22 Screen Description

24 Video Playback

31 Conguration

Firmware Upgrade

36

Product Specications

37 Product Specications

& Standards

38 LED Indicators

39 Recording Time

4

Introduction to the Manual

Thank you for purchasing a BlackVue by Pittasoft Co., Ltd.
This instruction manual contains information on how to operate your BlackVue.
Before using the product, make sure to read through this manual so as to use
the product in the correct way.
To enhance the performance of the product, the contents of this instruction
manual may be changed without prior notice.

Warranty & Support

y

This product records and saves videos of vehicle accidents, but it is not
guaranteed to record all accidents. Accidents with light impact that is not
enough to activate the impact detection sensor may not be recorded.

y

In accordance with Personal Information Security Law & related legislation,
Pittasoft Co., Ltd. will not be held responsible for any problem due to illegal
use of this product.

y

The recorded video produced by this product constitutes the secondary
data that may help to determine the circumstances of an accident. Pittasoft
Co., Ltd. will not be held responsible for any loss or damage caused by any
accident.

Copyright & Trademark

y

This instruction manual is protected by Copyright Law, and all rights to it
are protected by law.

y

It is prohibited to reproduce, copy, modify, or translate this instruction
manual without permission.

y

BlackVue is the registered trademark of Pittasoft Co., Ltd.
Pittasoft Co., Ltd. reserves the rights regarding all works related to the Black­Vue brand such as product design, trademarks, and product-promotional
videos. It is prohibited to reproduce, copy, modify, or use related works
without permission. Any violation may be penalized in accordance with the
relevant regulations.

Caution

yA formatted microSD card is provided when you purchase the prod-

uct. Insert the microSD card into BlackVue, and turn on the power.
The microSD card will be initialized, and programs such as BlackVue
Viewer will be installed.

DR3500-FHD 5

Getting Started

Cautions for Safety

The purpose of these cautions is to maintain user safety and avoid damage to
property.
Please make sure to read through this manual so as to use the product in the
correct way.

DANGER

Death or property damage can be caused for users if
the following directions are not followed:

y

Do not disassemble, repair, or modify the product yourself.

It can cause re, electric shock, or malfunction. For internal inspection and
repair, call the sales headquater.

y

If any foreign matter gets inside the product, detach the power cord
straightaway.

Call the sales headquater for repair.

y

Do not operate the product while driving.

It can cause an accident. Stop or park your car in a safe place to operate it.

y

Do not install the product where it can interfere with the driver's vision.

It can cause an accident.

y

Do not use a damaged or modied power cord. Use the cords provided
by the manufacturer.

Otherwise it can cause explosion, re, or malfunction.

y

Do not operate the product with wet hands.

It can cause electric shock.

y

Do not install it in an environment with high humidity, or combustible
gases or liquids.

It can cause explosion & re.

6

WARNING

Death or serious injury can be caused for users if the
following directions are not followed:

y

Do not leave the product where infants, children, or pets can reach it.

They might swallow small components, or their saliva could get into it and
cause an explosion due to a short circuit.

y

While cleaning the inside of the car, do not spray water or wax directly
onto the product.

It can cause re, electric shock, or malfunction.

y

If smoke or an unsual smell is emitted from the power cord, detach it
immediately.

Call the sales headquater or the dealer.

y

Keep the terminal of the power cord clean.

A dirty terminal can cause excessive heat and re.

y

Use the correct input voltage.

Otherwise it can cause explosion, re, or malfunction.

y

Connect the power cord rmly so that it cannot easily be disconnected.

Othersise it can cause re.

y

Do not cover the product with any material.

It can cause external deformation of the product or re. Use the product
and peripherals where ventilation is ensured.

DR3500-FHD 7

CAUTION

Injury or property damage can be caused for users if
the following directions are not followed:

y

Do not spray cleaning products directly onto the outside of the prod­uct.

It can cause discoloration, cracks, or malfunction.

y

If the product is used outside the optimal temperature range (0°C ~
60°C), performance can decline or malfunction can be caused.

y

Make sure that the product is installed properly.

The product can fall as a result of vibration, and may cause physical injury.

y

While entering or exiting a tunnel, during daytime in the face of bright
sunlight, or at night with no light, the quality of recorded video can
deteriorate.

y

If the product is damaged or the power supply is cut due to an accident,
video may not be recorded.

y

Excessively tinted windshield glass can distort the recorded video or
cause it to be indistinct.

y

Prolonged use of the product can increase the interior temperature
and cause burns.

y

microSD cards are a consumable so replace them after prolonged use.

They may not record video correctly after a long time in use, so check their
recording capability periodically and replace it as necessary.

y

Clean the lens regularly.

Foreign material attached to the lens can aect the recording quality.

y

Do not remove the microSD card while it is saving or reading data.

The data can be damaged or malfunction caused.

8

Checks for External GPS

Even if the GPS isn't working, video is recorded, but position coordinates and
driving speed are not recorded. When used for the rst time, or when the prod­uct is not used for 3 consecutive days, it will take some time for the GPS to nd
the current position.
If there is an error with the GPS time when checking recorded video with a
viewer program or the BlackVue application, turn the GPS o and on after a
signal is received.

Make sure to observe the following for an uninterrupted GPS signal.

y

Do not place any objects on the GPS.

y

Do not have the windshield glass tinted with a metallic component.

y Be careful with the installation of devices that may interfere with GPS recep-

tion (e.g. some wireless starters & alarms and MP3/CD players).

y Do not use it simultaneously with other devices that use GPS signal.
y Cloudy weather can interfere with GPS reception.
y GPS reception can be poor in tunnels, underpasses, or streets with may

Skyscrapers or high rise buildings, and generating stations, military bases,
or broadcasting transmitters etc.

Checks for the microSD Card

Refer to the followings for trouble-free use of your microSD card.

y

It is recommended to format it once a week.

y If the recorded video suers from break-up, format the microSD card.

y

For stable function, format it with programs recommended by the SD card as­sociation. For more details, refer to the BlackVue website (www.blackvue.com).

y Before formatting it, copy important les to other storage media to store

them.

y Insert the formatted microSD card into the product so that the microSD

card is automatically initialized and the rmware is installed on it.

y

Insert or remove the microSD card only when the product is turned o.

y

microSD cards are a consumables and they are guaranteed for 6 months.

y

Other manufacturer's microSD cards can cause compatibility problems so it
is recommended to use a Pittasoft microSD card.

y

The use of the Power Magic (the Battery Discharge Prevention Device)
can shorten the microSD card lifespan.

DR3500-FHD 9

Product Features

Q

Ultra-high quality and smooth video

Full HD (1920x1080) 30-frame ultra-high quality video

High-class design with functionality

Simple, luxurious design in matt black

Megapixel lens & CMOS sensor

Clearer vision with high-resolution megapixel lens during both
day/night-time driving



High-quality wide-angle lens (120°)

Maximized viewing angle to record accurate video of any acci­dent

u

l

w

Diverse recording options (Normal/Event/Parking)

Event recording and automatic conversion & deactivation of
parking mode

High-compression recording mode to extend SD-card life

Ecient memory usage with high-compression storage method

Support of viewer programs for Windows PC and Mac

BlackVue software with convenient congurations such as resolu­tion change, voice direction, and parking mode

10

Package Components

BlackVue Manual

Power Cord Cable Clips (5 EA)

Double-sided Tape for the Mounting

Bracket

microSD Card

(Including BlackVue Software)

microSD Card Reader

Note

y

Pictures of the components may dier from the actual ones.

y To enhance the performance of the product, components may be

changed without prior notice.

y

The package components and accessories can be purchased sepa­rately from the BlackVue homepage (www.blackvue.com).

DR3500-FHD 11

Names of Each Part

Camera Lens

Mounting Bracket

LOCK Button

microSD Card Slot

Function Button

(Press: MIC On/O,

Press and hold: Format the microSD card)

Power Socket

External GPS IN

Speaker

GPS LED

REC LED

12

How to Attach & Detach the Mounting Bracket

1

Pull the unit out of the mounting bracket with the LOCK button pressed.

2

Insert the unit into the mounting bracket until you hear clicking sound,

to attach it.

DR3500-FHD 13

How to Install the BlackVue

Checking Installation Position

1

It is recommended to install it at the back of rear view mirror. Clean any

foreign matter and moisture from the place where the product will be
installed.

Note

y

Do not install the product where it can interfere with the driver's vi­sion.

y

It is recommended to install the product at the designated BlackVue
installation center.

How to Insert & Remove the microSD Card

1

Insert the microSD card into the microSD card slot, as shown in the pic-

ture.

2

To remove the microSD card, press the microSD card once and then pull

it out. Make sure that the microSD card doesn't pop out while trying to
remove it.

14

Caution

y

Do not remove the microSD card while it is saving or reading data.
The data may be damaged or malfunction caused.

y Copy important data to other storage media to store. Pittasoft Co.,

Ltd. will not be held responsible for data loss due to user negligence.

Note

y

Insert or remove the microSD card only when the product is turned
o.

y

microSD cards are consumables. Replace them after prolonged use.

Installation

1

Stop the engine where there is some light and in a safe place, and then

remove the key.

2

Attach the product to the windshield glass with the double-sided tape.

Set the camera lens to point directly forwards to the center when install­ing it.

3

Use the power cord to connect the DC IN of the product to car's power

socket.

Note

y

It is recommended to use Power Magic (the Battery Discharge Pre­vention Device) to record video while the car is parked.

y To use the BlackVue at the same time as other equipment, purchase

and use a two-way adaptor.

DR3500-FHD 15

4

Use the cable clip to organize the power cord so that it doesn't interfere

with the driver's vision.

5

Adjust the lens angle of the camera.

6

Start the engine and check if the product works properly.

Caution

y

Do not remove the microSD card while it is saving or reading data.
The data may be damaged or malfunction caused.

y

Set the time (time zone) when you use BlackVue for the rst time.
(31 page)

Note

y

After a test drive, check if video was correctly recorded.

y

Recorded video is saved in the MP4 format.

16

Video Recording

Normal Recording

1

When the engine is started, the BlackVue is turned on automatically.

2

When the BlackVue is turned on, normal recording is automatically

started.

Note

y

If Power Magic (the Battery Discharge Prevention Device) is con­nected, the BlackVue is not turned o.

y

The normal recording function can be disabled in the BlackVue soft­ware conguration. (31 page)

Parking Mode Recording

1

If the car doesn't move for 10 min or longer when in normal mode, it is

automatically converted to parking mode recording.

2

In parking mode recording, if movement or impact is detected by the

camera, video is recorded.

Note

y

To use parking mode recording while the engine is stopped, con­nect Power Magic (the Battery Discharge Prevention Device).

y

Automatic conversion function of parking mode recording can be
disabled in the BlackVue software conguration. (31 page)

DR3500-FHD 17

Event Recording

1

If an impact is detected in normal or parking mode recording, event

recording is started.

2

It records video for 5 seconds before and 55 seconds after the impact.

Note

y

Sensitivity to impact can be adjusted in the BlackVue software con­guration. (33 page)

y

Event recording time can be adjusted in the BlackVue software
configuration. (31 page) If you set the event recording time for 2
minute, it records video for 5 seconds before and 115 seconds after
the impact.

18

Simple Video Playback

How to Playback using a microSD Card

Playback Using a Smartphone

With a smartphone that supports microSD cards video can be played back.

1

Turn o the BlackVue and remove the microSD card.

Note

y For the details on how to remove the microSD card, refer to How to

Insert & Remove the microSD Card. (13 page)

2

Insert the microSD card into the smartphone.

3

Open an application to play back recorded videos and select the
movie you want to play back.

Note

y

How to play back recorded videos may dier between smartphones,
so refer to your instruction manual for the details.

y If there are many recorded videos in the microSD card, it may take a

long time to load the le.

y Some smartphones don't support full HD video playback. For smart-

phones that support full HD video playback, refer to the BlackVue
website (www.blackvue.com).

DR3500-FHD 19

How to Playback using a PC

Recorded videos can be played back with a PC.

1

Insert the provided microSD card into a microSD card reader.

2

Connect the microSD card reader to the PC.

3

Open an application to play back recorded videos and select the movie

you want to play back from the removable drive.

Note

y When trying to play back a recorded video with a movie playback

program on a PC, install the H.264 and AAC audio codecs.

y

For how to play back using the BlackVue software, refer to Video
Playback. (24 page)

20

How to use the BlackVue Software

Installation & Execution

How to Install

Dedicated BlackVue software can be installed in a PC.

1

Insert the provided microSD card into a microSD card reader.

2

Connect the microSD card reader to the PC.

3

Execute the 'BlackVueSetup(HD).exe' file in the 'BlackVue\Software'

folder.

4

Install the program according the installation program instruction. When

the installation is nished, the BlackVue software icon is displayed on the
desktop.

5

Double-click the icon to execute the program.

Note

y

Only the English version of BlackVue software is available for Mac,
and the functions & screen may be different from the BlackVue
software for Windows.

DR3500-FHD 21

How to Execute Without Installation

It is possible to execute the dedicated BlackVue program without installation.

1

Insert the provided microSD card into a microSD card reader.

2

Connect the microSD card reader to the PC.

3

Double-click 'BlackVue.exe' in the 'BlackVue\Application' folder.

22

Screen Description

1

7

3

4

5

6

2

No. Name Description

1

Playback Screen
for Recorded
Videos

Videos can be played back using this screen. The
mouse can be used to zoom in/out.

2

Language
Setting

If you change the language on playback screen,
the language for BlackVue Viewer can be changed.
details about language conguration for BlackVue,
refer to the Basic Conguration. (31 page)

3

G-Sensor
Information

G-sensor information can be checked, at the time
the video was recorded.

4

GPS Information

GPS information can be checked, at the time the
video was recorded.

DR3500-FHD 23

No. Name Description

5

Recorded Video
List

Using the le list and map tab, the recorded video
list, and where a video was recorded can be checked.

: This is an normal recording le and marked

with green in the timeline.

: This is an event recording le and marked

with orange in the timeline.

: This is a parking mode recording le and

marked with blue in the timeline.

6

Timeline

Video can be explored with the date, hr, min, and
sec of when a video was recorded.

7

Playback Option
Button

The playing-back window can be extended to full
screen and be reversed upside down. With the
playback control button, video playback, speed,
and volume can be controlled.

Note

y

This model may not support the 2CH view and GPS function. If you
want to use GPS function, connect the external GPS with BlackVue.

24

Video Playback

How to Control the Playback of Recorded Video

The recorded video can be played back in full screen mode and be reversed
upside down. The playback speed can be adjusted.

View Upside-Down

Playback/Pause StopFull Screen View Volume Control

Playback Time

Play Previous File Play Next File

Playback Speed Control

Frame Move (Previous) Frame Move (Next)

Note

y

While a recorded video is played back, double-click the screen to
switch to full screen view. Double-click the screen again or press ESC
to return to default view.

y

While playing back a recorded video, use the mouse wheel to zoom
in/out.

y

While playing back a recorded video, right-click the screen to view
100 % zoom-in screen.

DR3500-FHD 25

Magnifying Glass

Some parts of a recorded video can be zoomed in while playing back.
Left-click the screen while a recorded video is being played back to see a partial
zoom-in window and

to use it to identify the number plate of a car while moving it.

Note

y

You can use the Magnifier function only in BlackVue Viewer for
Windows.

Timeline

Video can be explored with the date, hr, min, and sec of when a video was re­corded.

Year Selection

Timeline for Hr Selection

Timeline for Min Selection Timeline for Sec Selection

Month Selection

Note

y

In the date selection area, the date with a recorded video is marked
by a red circle and the currently-selected date is marked by a yellow
circle.

26

How to Manage Files

With the recorded video list, a file can be deleted or saved with a different
name.

1

Select a le from the recorded video list and right-click it.

2

To delete a le, click Delete.

3

To save it with dierent name, click Export and select the option you
want.

4

Press the OK button and select the le name you want, together with

the path.

5

Press the Save button to nish.

DR3500-FHD 27

How to Verify Files

With the recorded video list, a le can be veried forgery.

1

Select a le from the recorded video list and right-click it.

2

Click Verication and click OK button.

28

How to Check the Map

Where a video was recorded can be checked with the map.

1

Select a le from the recorded video list and play it back.

2

Press the Map tab.

3

With the +/- button or mouse wheel, the map can be zoomed in/out.

Speed Unit Change

Map Type
Selection

Car Location

Map

Zoom-In/Out

Note

y

To use the map service, an Internet connection is required.

y

Only for the recorded file with GPS information, the data can be
checked.

DR3500-FHD 29

How to Check MyWay Viewer

The driving route of a recorded video can be checked.

1

Select a le from the recorded video list and play it back.

2

Press the button. The driving route will be displayed on the map.

3

Double-click the map to play back the recorded video of the nearest

driving route from the clicked point.

Speed Unit Change

Car Location

Record Starting
Point

Driving Route Currently-Played File

Latitude & Longitude Car Location

Map Type
Selection

Note

y

To use the map service, an Internet connection is required.

y

Only for the recorded file with GPS information, the data can be
checked.

30

How to Save as an Image

While playing back a recorded video, some parts can be saved as images if you
want.

1

Select a le from the recorded video list and play it back.

2

From the image to be saved, press the button.

Note

y

Using the timeline or press the

/ button to explore detailed

images.

3

Press the

G

button.

4

Select the le name you want, together with the path, and click the Save

button.

Note

y

JPG and BMP formats are supported for image les.

How to Print Out an Image

While playing back a recorded video, some parts can be printed out as images
if you want.

1

Select a le from the recorded video list and play it back.

2

From the image to be saved, press the button.

Note

y

Using the timeline or press the

/ button to explore detailed

images.

3

Press the button.

4

Select the printer and click the OK button.

DR3500-FHD 31

Conguration

Basic Conguration

Time, video, and recording congurations can be changed.

1

Click the G button and click the Basic tab.

2

After changing the conguration, click Save & Close.

1

2

3

4

No. Function Description

1

Time Zone
(Timezone

Conguration)

The time zone can be configured for where it is
used. The congured time zone is used as informa­tion for recorded video. For the details, refer to the
How to Congure the Time. (32 page)

2

Image Setting

Resolution, quality, and the brightness of the re­corded video can be configured. According to the
resolution, recording time varies: for the details, refer
to the Recording Time. (39 page)

3

Recording

Setting

Normal Record, Voice Record, Date and Time
Display and Auto Switching to Parking Mode

function can be turned on/o.

Speed Display and recording mode, Record File
Unit and Recording Storage Setting can be

changed.

4

Language

Setting

The language of BlackVue voice directions can be
changed.

32

Note

y

With the normal recording function disabled, only event and
parking mode recording videos are saved.

y With the speed display unit disabled, the vehicle speed is not dis-

played when the recorded videos are played back.

y On microSD cards, older files are deleted first to mark space for

newly-recorded videos. Copy and store important les such as even
recording les to other storage media.

y

If you use a low-end device for playing a recorded video, please set
Quality to Normal (low-end compatible).

How to Congure Time

If the model is not equipped with GPS, set the time manually for use. If you do
not set the time, the time of the recorded video may not be saved correctly.

1

Format the microSD card and perform the rmware upgrade.

2

Access the BlackVue website (www.blackvue.com) and download the

time setting program.

3

Run the time setting program before setting the time.

Note

y

The time should be set to the time BlackVue turns on. Booting time
for BlackVue is about 15 seconds after power is connected.

y

If you use the external GPS, the time is set automatically.

DR3500-FHD 33

How to Congure Sensitivity

It is possible to congure the G-sensor sensitivity to start event recording dur­ing normal recording and the G-sensor & motion detection sensitivity to start
event recording during parking mode recording, respectively.

1

Click the G button and click the Sensitivity tab.

2

After changing the conguration, click Save & Close.

Note

y

For details about advanced sensitivity configuration, refer to Ad­vanced Sensitivity Conguration. (34 page)

1

2

No. Function Description

1

Sensitivity
for Normal
Recording

It is possible to congure the G-sensor sensitivity to
start event recording during normal recording.

2

Sensitivity for

Parking Mode

It is possible to congure the G-sensor and motion
detection sensitivity to start event recording during
parking mode recording.

34

Advanced Sensitivity Conguration

The sensitivity can be congured while watching a recorded video.

1

Click the G button and click the Sensitivity tab.

2

Click the Advanced Setting button of the conguration you want.

3

Play back a recorded video. Saved G-sensor information is displayed at

the bottom of the recorded video which is played back.

4

Move the control bar up/down to adjust the sensitivity range. If the

range is wide, it is less sensitive, and if the range is narrow, it is more sen­sitive.

It is recorded as an event. It is not recorded as an event.

Note

y

If an event recording is started due to the sensitivity configured
while a recorded video is being played back, the edge of the play­back screen blinks in orange.

5

After changing the conguration, click Save & Close.

DR3500-FHD 35

Other Conguration

Congurations for LED indication and voice direction can be changed.

1

No. Function Description

1

Etc.

For video recording status, normal recording mode,
and parking mode recording, the LED indicators can
be turned on/o.
Voice direction item or the volume can be changed.

How to Apply Conguration

The user's conguration can be applied to the product.

1

Insert the microSD card into the product. For details on how to insert the

microSD card, refer to How to Insert & Remove the microSD Card.
(13 page)

2

When the power is turned on, the user's conguration is automatically

applied.

Note

y

Insert the microSD card only when the product is turned o.

36

You can upgrade the rmware version by connecting the microSD card into the
PC.

1

Connect the microSD card to the PC. For details on how to connect, refer

to How to Playback using a PC. (19 page)

2

Format the microSD card, and connect to BlackVue website (www.blackvue.

com). Then, download the rmware upgrade le, in the form of a zip le.

3

Unzip the le, and copy the BlackVue folder to the microSD card.

4

Insert the microSD card in BlackVue, and turn on the power. Then, up-

grade will automatically occur.

Note

y

After rmware upgrade, the user's conguration is initiated.

y

For detailes on how to insert the microSD card, refer to How to
Insert & Remove the microSD Card. (13 page)

y

Insert the microSD card only when the product is turned o.

Caution

y

Make sure that the power is never turned off while firmware up­grade is in progress.

Firmware Upgrade

Product Specications & Standards

DR3500-FHD 37

Product Specications & Standards

Product Specications

Model Name

DR3500-FHD

Color/Size/Weight

Matt Black / Width 102.8mm x Height 32mm / 86g

Memory

microSD Card (8GB / 16GB / 32GB)

Recording Mode

Normal Recording, Event Recording (Impact Detection), and
Parking Mode Recording (Motion+Impact Detection)

❈

For parking mode recording, a battery discharge prevention
device is required.

Camera

CMOS Sensor (Approx. 2M Pixel)

Viewing Angle

Opposite Angle 120°, Horizontal 98°, Vertical 55°

Resolution/Frame

Full HD(1920x1080)@30fps, Full HD(1920x1080)@15fps,
HD(1280x720)@30fps, HD(1280x720)@15fps, D1(720x480)@30fps

❈

Resolution/frame can be changed

Video Compression

Mode

MP4

GPS

External

Microphone

Built-in

Speaker

Built-in

❈

Voice Directions

LED Indicators

Recording LED, GPS LED, Security LED

Sensor

3-Axis Acceleration Sensor

Button

Function Button (For MIC On/O and format the microSD card)

Backup Battery

Built-in Super Capacitor

Input Power

DC 12V-24V

Current Consumption

Max. 2.4W

Operation Temperature

-20°C ~ 60°C

Certicates

KC, FCC, CE, RoHS, WEEE

Software

BlackVue Viewer

❈

Windows XP or later (Up to Windows 8), Mac Leopard OS
X(10.5) or later

38

LED Indicators

LED

State

Recording (REC) GPS Security

Boot-up

Red Light Green Light Blue Light

Recording

Normal

Red Blinking Blue Blinking

Event

Red Blinking

Blue Blinking

Parking

Red Blinking

Blue Blinking

GPS ON/OFF

Green Light

DR3500-FHD 39

Recording Time

Memory

Capacity

Image

Quality

Full HD

(1920x1080)

30fps

Full HD

(1920x1080)

15fps

HD

(1280x720)

30fps

HD

(1280x720)

15fps

D1

(720x480)

30fps

8GB

Highest 1 HR 40 MIN 2 HR 2 HR 2 HR 50 MIN 4 HR 20 MIN

High 2 HR 20 MIN 2 HR 50 MIN 2 HR 50 MIN 4 HR 20 MIN 5 HR 40 MIN

Normal 3 HR 30 MIN 4 HR 20 MIN 4 HR 20 MIN 5 HR 40 MIN 8 HR 30 MIN

Normal

(low-end

compatible)

2 HR 20 MIN 3 HR 30 MIN 3 HR 30 MIN 5 HR 40 MIN 8 HR 30 MIN

16GB

Highest 3 HR 20 MIN 4 HR 10 MIN 4 HR 10 MIN 5 HR 40 MIN 8 HR 30 MIN

High 4 HR 30 MIN 5 HR 40 MIN 5 HR 40 MIN 8 HR 30 MIN 11 HR 20 MIN

Normal 6 HR 50 MIN 8 HR 30 MIN 8 HR 40 MIN 11 HR 20 MIN 17 HR 10 MIN

Normal

(low-end

compatible)

4 HR 30 MIN 6 HR 50 MIN 6 HR 50 MIN 11 HR 20 MIN 17 HR 10 MIN

32GB

Highest 6 HR 40 MIN 8 HR 20 MIN 8 HR 20 MIN 11 HR 10 MIN 16 HR 50 MIN

High 9 HR 11 HR 10 MIN 11 HR 10 MIN 16 HR 50 MIN 22 HR 30 MIN

Normal 13 HR 30 MIN 16 HR 50 MIN 17 HR 22 HR 30 MIN 33 HR 50 MIN

Normal

(low-end

compatible)

9 HR 10 MIN 13 HR 30 MIN 13 HR 40 MIN 22 HR 40 MIN 33 HR 50 MIN

Note

y

There may be some variation with actual recording time.

y

Depending on the image quality, the microSD card lifespan can be
shorten.

Before Requesting A/S Service

It is required for users to back up important data regularly from
the storage device (to other separate media). Depending on the
situation, it will be necessary to delete the data from the internal
storage device (component). It might be necessary to delete all
the data from the product for A/S Service. So it is required for us­ers to back up important data by themselves before requesting
A/S Service. For all A/S services, it is assumed that the user has
already backed up their data, so there is no additional back-up
process. Therefore, it is important to note that we will not be held
responsible for any data lost during A/S service.

FCC Compliance Information

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions;
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.

CAUTION : Changes or modications not expressly approved by
the party responsible for compliance could void the user’s au­thority to operate the equipment.

Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable pro­tection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi­cations. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:

y

Reorient or relocate the receiving antenna.

y

Increase the separation between the equipment and receiver.

y

Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.

y

Consult the dealer or an experienced radio/TV technician for
help.

Modications not expressly approved by the manufacturer could
void the user's authority to operated the equipment under FCC
rules.

Name | Car Dashcam

Manufacturer

|

Pittasoft Co., Ltd. / Korea

Address

|

(Gasan-dong, BYC HIGHCITY), A-7th oor,

131, Gasan digital 1-ro, Geumcheon-gu, Seoul,
153-718, Republic of Korea

Sales Headquater

|

Tel: [phone](#3)

|

Fax: [phone]

e-mail

|

[e-mail]