Pitco Frialator SF50A, SF65A General Manual

Project

Item No.

Under Fryer Filters (UFM)

Spacefighter Models SF50A & SF65A

Quantity

OPTIONS & ACCESSORIES AT ADDITIONAL COST

o Flush hose o Filter powder
o Filter paper o Filter/fryer brush and scoop
o Drain extension
o Paperless stainless steel mesh filter

STANDARD SPECIFICATIONS

CONSTRUCTION

n Filter pan and pump assembly enclosure are

constructed of polished stainless steel.

n All other surfaces are nickel plated finish.
n Welded steel frame mounted on four ball-bearing

swivel casters for easy movement.

n 1/3 HP Heavy duty motor and pump assembly.
n Large filter area for large fryer filtering.
n Automatic internal heating system to clear the pump

and soften shortening in filter lines.

CONTROLS

Gas fryer shown with (OPTIONAL) casters

STANDARD ACCESSORIES AT NO COST

n Filter powder and fryer cleaner sample packets
n Cleaning Brush
n Filter paper
n Filter scoop

STANDARD COMBINATIONS

o Model E14-2 UFM (two Model E14s)
o Model E147 UFM (one Model E14 and one Model E7)
o Model E18-2 UFM (two Model E18s)

Refer to fryer specification sheets for options and other
technical information. Additional filters may be needed for
larger systems.

NOTE

Many other combinations are available. Call your
dealer/distributor for more details.

n Pump ON/OFF switch
n PREHEAT FINISHED green light indicates when filter

is ready to pump.

OPERATIONS

n Easy access front mounted filter pump control and

indicator.

n Quick disconnect hose connections make it easy to

assemble and disassemble.

n Integrated filter system valves for simple filter

operation.

n Quick release filter pan for easy removal.
n Light weight, removable filter assembly for fast paper

changes under busy conditions.

n Can be used as a portable filter to service non-filter

equipped units (requires optional flush hose).

APPROVALS

n AGA Certified
n CE Approved
n CGA Certified
n NSF Listed
n MEA Approved

Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501  509 Route 3A, Bow, NH 03304, USA

[phone]  [phone]  FAX [phone]

Under Fryer Filters (UFM) - Spacefighter Models SF50A and SF65A

DIMENSION

MODEL A B C D

ELECTRICAL

VOLTS / FREQ / PHASE AMPS / ø VOLTS / FREQ / PHASE AMPS / ø

115 / 60 / 1ø 7.0 240 / 50 / 1ø 3.5

Current rating is for filter ONLY. For fryer electrical
requirements, refer to fryer specification sheets.

PERFORMANCE CHARACTERISTICS

1/3 HP motor pumps 5.6 GPM (21.2 LPM)

SF50A-E147 24-23/32 24 18 31

(62.80) (61.0) (45.7) (78.7)

SF50A-E14 24-23/32 24 18 31

E14X, E14B (62.80) (61.0) (45.7) (78.7)

SF65A-E18 28-23/32 24 18 35

(73.00) (61.0) (45.7) (88.9)

NOTE - The illustration shows a filter installed in a
E18-2. This illustration is provided to show location
only. For fryer dimensions and requirements refer
to the fryer specification sheet. Fryer models E7,
E14, E14X, E14B, & E18 can be combined with a
UFM filter module.

OIL CAPACITY

85 pounds (38.6 KG) SF50A
100 pounds (45.4 KG) SF65A

SHIPPING INFORMATION

* 155 pounds (70.3 KG) / 26 cubic feet (0.74 cubic meters) SF50A

* 165 pounds (74.8 KG) / 26 cubic feet (0.74 cubic meters) SF65A

* Shipping information is for the filter unit ONLY. Refer to fryer

specifications for fryer shipping information

SHORT FORM SPECIFICATION

Provide Pitco UFM (Spacefighter) filter system. Unit shall have an integrated piped filtration
system located underneath the fryer(s). Filter assembly shall utilize envelope type filter paper
with 500 square inches (3,226 cm) of filter area. Filter shall be provided with stainless steel lid
and mounted on casters for easy removal. Filter shall have an automatic heater system to
soften solidified shortening in the filter lines. Filter assembly shall use quick disconnect fittings
for easy removal from fryer. Filter pan shall be a lift-out design for quick removal and thorough
cleaning. Provide accessories as follows:

TYPICAL APPLICATION

Space saving filter capabilities with the added feature of using the filter module as a portable
filter.

Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501  509 Route 3A, Bow, NH 03304, USA

L10-010 Rev. 03 04/00 Specifications subject to change without notice. Printed in U.S.A

[phone]  [phone]  FAX [phone]