Pitco AG14S User Manual
Project
Advanced
GAS Frying System
Model AG14S and AG14S/FD
Item No.
Quantity
STANDARD SPECIFICATIONS
CONSTRUCTION
n Welded tank with a super smooth machine peened
finish ensures easy cleaning.
n Long lasting, high temperature alloy stainless steel
heat baffles are mounted in the heat exchanger tubes
to provide maximum heating and combustion
efficiency.
n High production/fast recovery fryer assembly available
in combination of full tank (F) and split tank (S) fryers.
n Fryers are available in combinations of two or more
units with filter drawer.
n Assembly constructed with stainless steel tanks,
splashback, exterior front panel and door.
CONTROLS
(Shown with Intellifry computer)
STANDARD ACCESSORIES
n Digital Control n Drain valve interlock
n Baskets (Twin Size) n Tube racks
n Lift off basket hangers n Clean out rod
n Joining strip n Fryer cleaning brush
n 9" adjustable legs n Rear gas connection
n Electronic Ignition
n Stainless steel tank, aluminized cabinet
AVAILABLE OPTIONS & ACCESSORIES
o Intellifry computer
o Filter drawer filter system with heat tape
(for 2 or more fryers)
o Stainless steel exterior
o Bread & Batter cabinet
o Filter/fryer brush
o Flush hose
o Filter powder
o Filter paper
o 9" adjustable heavy duty casters
n Digital controller maintains the fryer temperature
between 250° (122°C) and 380°F (193°C).
n Temperature limit automatically shuts off all gas flow
if the fryer temperature exceeds 435°F (224°C) ±15°F
(10°C).
OPTIONAL FILTER SYSTEM
(Available on 2 or more units)
n Filter drawer glides on heavy duty stainless steel rollers.
n 1 1/4" NPT drain valve for quick draining on full tanks,
1" NPT drain valve on split tanks.
n Easy to remove filter unit for fast cleaning and paper
replacement.
n Filter piping integrated into the fryer for no-hassle
filtering.
n Heat tape standard on filter units.
APPROVALS
¨ AGA Certified
¨ CE Approved
¨ CGA Certified
¨ NSF Listed
Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 509 Route 3A, Bow, NH 03304, USA
(800) 258-3708 (603) 225-6684 FAX (603) 225-8472
Model AG14S and AG14S/FD - Advanced Gas Frying System
ELECTRICAL
VOLTAGE/PHASE/HZ
Option 120/1/60 220-240/1/50
AMPS/EA AMPS/EA
FRYER CONTROLS (per fryer) 2.0 1.0
FILTER PUMP WITH HEAT TAPE 15.0 7.5
(varies with size)
GAS CONSUMPTION
40,000 BTU's/Hour (10,080 KCal/Hr) - per Split Tank
80,000 BTU's/Hour (20,160 KCal/Hr) - per Full Tank
22.5 - 23 KW - CE Rating for Full and Split Tanks
Available in Natural or Propane gas.
Split Tank: 25 - 30 pounds (11.3 - 13.6 KG)
3.2 - 3.9 gallons (12.1 - 14.8 liters)
Full Tank: 40 - 50 pounds (18.1 - 22.7 KG)
5.2 - 6.5 gallons (19.7 - 24.6 liters)
SHIPPING INFORMATION
PERFORMANCE CHARACTERISTICS
Split Tank Frying Area 7" x 14" (17.8 cm x 35.6 cm)
42.5 pounds (19.3 Kg.) of potatoes per hour
Full Tank Frying Area 14" x 14" (35.6 cm x 35.6 cm)
85.0 pounds (38.6 Kg.) of potatoes per hour
OIL CAPACITY
AG14S/Full - 220 Pounds
AG14S/Split - 230 Pounds
Filter drawer - 150 Pounds
SHORT FORM SPECIFICATION
Provide Pitco Model AG14S and AG14S/FD Advanced tube fired gas fryer. Fryer shall have
a blue flame burner system combined with stainless steel heat tubes utilizing high temperature
alloy baffles. Fryer shall be equipped with a digital cooking controller. Fryer shall have a deep
cool zone; minimum 15% of total oil capacity to trap burnt particles, crumbs and black specks.
Fryer cooking area shall be 14" x 14" (35.6 cm x 35.6 cm) for full tank and 7" x 14" (17.8 cm
x 35.6 cm) for split tank. Each tank configuration shall have a cooking depth of 4" (10.16 cm).
Unit may have an integrated piped filtration system located underneath the fryer. Filter assembly
shall utilize filter paper. Provide accessories as follows:
TYPICAL APPLICATION
High efficiency frying that requires a high volume production rate.
Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 509 Route 3A, Bow, NH 03304, USA
L10-117 Rev. 03 04/00 Specifications subject to change without notice. Printed in U.S.A
(800) 258-3708 (603) 225-6684 FAX (603) 225-8472
Loading...