Pitco 65c+ Specification Data
Project_________________________
Item No._________________________
Quantity_________________________
MODEL 65C+ GAS FRYER
STANDARD FRYER FEATURES & ACCESSORIES
Tank - Stainless steel
Cabinet - stainless front, door
Aluminized steel sides and back
Millivolt Thermostat (T-Stat)
Themo-Safety pilot with built in regulator.
High Temperature safety limit switch
3/4 NPT rear gas connection
1 ¼” (3.2 cm) Full port drain valve for fast draining
Separate Manual gas shutoffs, for front servicing
Integrated flue deflector
6” (15.2cm) adjustable legs, easier access to
clean
Tube rack, allows crumbs & debris into cool zone
Removable basket hanger, requires no tools
Drain Line Clean out rod
Drain extension
Fryer cleaner sample packet
Choice of basket options :
2-Twin Baskets
1-Full Basket
MODEL 65C+ GAS FRYER
APPLICATION
For High Volume Gas single standalone frying specify
Pitco Gas Model 65C+ tube fryer.
MODELS AVAILABLE
65C+ (65-80 lbs, 18 x 18” fry area, 150Kbtu/hr)
Natural
65C+ (65-80 lbs, 18 x 18” fry area, 150Kbtu/hr)
Propane
CONSTRUCTION
Welded tank with a super smooth machine peened
finish ensures easy cleaning.
Long lasting, high temperature alloy stainless steel
heat baffles are mounted in the heat exchanger tubes
to provide maximum heating and combustion
efficiency.
Standing pilot light design provides a ready flame
when heat is required.
CONTROLS
Integrated gas control valve acts as a manual and
pilot valve, automatic pilot valve, gas filter, pressure
regulator and automatic main valve.
Gas control valve prevents gas flow to the main
burner until pilot is established and shuts off all gas
flow automatically if the pilot flame goes out.
Temperature limit automatically shuts off all gas flow if
the fryer temperature exceeds 450°F (232°C) ±15°F
(±10°C) / 410°F (210°C) for International units.
OPTIONS & ACCESSORIES (AT ADDITIONAL COST)
Tank stainless steel
Stainless Steel back
6" (15.2cm) adjustable rear and front locking casters
Flexible gas hose with disconnect and restraining
cable
Tank cover
3-Triple Baskets
Pitco Frialator, Inc • P.O. Box 501, Concord, NH 03302-0501 • 509 Route 3A, Bow, NH 03304
603-225-6684 • FAX: 603-225-8497 • www.pitco.com
L10-327 Rev 0 02/09 Printed in the USA
MODEL 65C+ GAS FRYER
MODEL 65C+ GAS FRYER
INDIVIDUAL FRYER SPECIFICATIONS
Model Frying Area Cook Depth
65C+ 18 x 18 in (45.7 x 45.7 cm) 3-1/4 - 5 in (8.3 -12.7 cm)
Oil Capacity
65-80 Lbs (29.4 - 36.3 kg)
FRYER SHIPPING INFORMATION (Approximate)
Model Shipping Cube
65C+
226 Lbs (103 kg)
Shipping Crate Size H x W x LShipping Weight
45 x 23 x 38 in (114.3 x 58.4 x 96.5 cm)
22.8 ft
3
. (0.6m3 )
INSTALLATION INFORMATION
GAS SYSTEM REQUIREMENTS
Gas Type
Natural
Propane
Gas Input
7 - 10" w.c.(17.4 mbars/ 1.7 kPa)
11 - 13" w.c.(27.4 mbars/ 2.7 kPa)
150,000 BTU's/Hour (44 kW) 158MJ/hr)
Burner Manifold Pressure Store Supply Pressure *
4" w.c. (10 mbars / 1 kPa)
10" w.c. (25mbars/2.4 kPa)
* Check plumbing / gas codes for proper gas supply
line sizing to sustain burner pressure when all gas
appliances are full on.
CLEARANCES (Do Not Curb Mount)
30"
(76.2 cm)
6"
(15.25 cm)
Combustible material Non-Combustible material
Sides min. Rear min.
6" (15.2cm) 6" (15.2cm)
Sides min.
Rear min.
0"0"
Do not block / restrict flue gases from flowing into hood
or install vent hood drains over the flue.
Fryer Flue AreaFront min. Floor min.
SHORT FORM SPECIFICATION
Provide Pitco Gas Model tube fired high volume gas floor fryer. Fryer shall be 65-80 lbs oil capacity, 150,000 Kbtu/hr, 18” by 18” fry area, mild steel (or optional
stainless) peened tank, stainless front, door, sides. Blower Free atmospheric burner system, with millivolt thermostat and thermo-safety pilot, separate gas shut
off, 3/4" npt rear gas connect, recessed cabinet back, 1-1/4" Full port drain. Provide options and accessories as follows:
Pitco Frialator, Inc • P.O. Box 501, Concord, NH 03302-0501 • 509 Route 3A, Bow, NH 03304
603-225-6684 • FAX: 603-225-8497 • www.pitco.com
We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold.
L10-327 Rev 0 02/09 Printed in the USA
Loading...