Pipe fitter Hand book Instructions

Next Page

Return

NOT FOR RESALE

10.06

TRUSTED

Next Page

Previous Page

Return

FOR 150 YEARS

We built our reputation from the ground up.

Anvil’s history stretches back to the mid1800s,
when a company named Grinnell® began
providing its cus tomers with the finest
quality pipe products. Since 2000, those quality
products a nd services —and the people who
provide them—have been known as Anvil
Inter national. Anvil customers r eceive the
quality and integrity that have been building
str ong connections in both products and
business relationships for over 150 years.

Fr ederick Grinnell opens a piping
pr oducts foundr y in Cranston, RI,

and eventually develops the

Grinnell Supply Sales Division.

Providence Steam & Gas Pipe Co.
is for med. Fr ederick Grinnell

1850

purchases a controlling interest.

®

1909

B U I L D I N G C O N N E C T I O N S T H A T L A S T

Grinnell Co. acquired by
International Telephone

General Fire Extinguisher Co.

1919

becomes Grinnell Co.

and T elegraph.

Gruvlok® line of
grooved fittings

1960

is introduced.

Focused Product Line:

Anvil ® Malleable and Cast Iron Fittings

A nvil ® H angers, Supports and Struts

Anvil ® Seamless Pipe Nipples

Anvil ® Steel Pipe Couplings and Small Steel Fittings

Beck Welded Pipe Nipples

Anvil® International is the largest and most

complete fitting and hanger manufacturer

Anvil® International acquires Star Pipe Products,

Building and Construction Divisions (SPF) and

forms AnvilStar

Anvil® International acquires Merit® Manufacturing

1969

J.B. Smith™ and Catawissa™ join

The industr y’ s tr usted manufactur er of pipe

pr oducts is r enamed Anvil Inter national, Inc.

Tyco sells the distribution and manufacturing
operations known as “Grinnell Supply Sales“,

but keeps the Grinnell® trademark.

the Grinnell Supply Sales and

Manufacturing division.

in the world.

™

Fire Products Division.

and Beck Manufacturing.

1994

Merit ® Tee-Lets and Drop Nipples

Gruvlok ® Couplings, Fittings and Valves

T M

S PF

Cast Iron and Ductile Iron Fittings

T M

S PF

Malleable Iron Fittings

TM

SPF

Grooved Fittings and O’Lets

J.B. Smith Swage Nipples and Bull Plugs

Catawissa ® Wing Unions and Check Valves

TODAY

2004

2001

2000

1999

®

Grinnell

is a registered trademark
of Grinnell Corporation, a Tyco
International Ltd. company.

ANVIL

BRANDS

:

®

®

Next Page

Previous Page

Return

Anvil—Building ConneCtions thAt lAst

Anvil’s focused product line consists of:

• Anvil® Malleable & Cast Iron Fittings

• SPF™ Malleable, Cast & Ductile Iron
Fittings

• Anvil® Hangers, Supports

• Anvil-Strut™ Strut and Strut Fittings

• Beck Welded Pipe Nipples

• Anvil® Seamless Pipe Nipples

• SPF™ Steel Pipe Nipples

• Anvil® Steel Pipe Couplings & Small
Steel Fittings

• Merit® Tee-Lets & Drop Nipples

• Gruvlok® Couplings, Fittings & Valves

• SPF™ Grooved Fittings & O'Lets

• J.B. Smith™ Swage Nipples & Bull Plugs

• Catawissa™ Wing Unions & Check Valves

ConneCting with CoRe MARKets:

From plumbing, mechanical, and fire
protection, to mining, oil & gas, and
OEMs, Anvil's focus has always been
on providing real solutions for your
applications. Our representatives
are experts in the markets they serve,
and understand the needs of your
business. Anvil will work with you to
find innovative products that meet your
demands and exceed your expectations.

ConneCting with QUALITY:

Many things have changed during the
150 years in the industry - including the
name above our door - but our quality
and commitment remains the best
in the business. Our ISO 9001:2000
manufacturing facilities produce a range
of products unmatched by any other
single manufacturer. Our responsive
service sets an industry standard
for dependability and effectiveness
recognized around the world.
Whatever the word "quality" means to
your business, Anvil guarantees it in
everything we do.

ANVIL PIPE FITTERS HANDBOOK 3

ConneCting with WHOLESALERS:

Wholesale distribution has always been
a vital aspect of Anvil's business. Our
dedication to the wholesale channel ­and our customers - is a driving force for
our services. These relationships remain
a primary focus of Anvil's innovation.

ConneCting with CUSTOMERS:

The most import connection that Anvil
makes are the ones we make with our
customers. In the field, over the phone,
or on the web, we strive to provide our
customers with the products, assistance,
and service they need - when they need
it. Responsive and accessible customer
support is what makes the difference
between simply delivering products, and
delivering solutions.

Anvil–

Building ConneCtions thAt lAst.

visit us on the weB At: www.anvilintl.com

INTRODUCTION

tABle of Contents

Next Page

Previous Page

Return

gRuvloK® PRoduCt infoRMAtion . . . 6-148

instAllAtion & AsseMBly . . . . . . . 149-202

teChniCAl infoRMAtion . . . . . . . . 203-315

gRuvloK® PRoduCt infoRMAtion:

CouPlings foR gRooved-end PiPe

Fig. 7001 Standard Coupling . . . . . . . . . . . . .6-8

Fig. 7011 Standard Coupling . . . . . . . . . . . . . . 9

Fig. 7401 Rigidlok® Coupling . . . . . . . . . . 10-11

Fig. 7000 Lightweight Coupling . . . . . . . . . 12-13

Fig. 7400 Rigidlite® Coupling . . . . . . . . . . 14-15

Fig. 7003 Hingelok® Coupling . . . . . . . . . . . .16

Fig. 7010 Reducing Coupling . . . . . . . . . . . 17-18

Fig. 7012 Gruvlok Flanges . . . . . . . . . . . . . 19-21

Fig. 7013 Gruvlok Flanges . . . . . . . . . . . . . . . 22

Fig. 7240 Expansion Joints . . . . . . . . . . . . . . . 23

BRAnCh outlets

Fig. 7042 Outlet Coupling . . . . . . . . . . . . . 24-25

Fig. 7045 Clamp-T, FPT Branch . . . . . . . . . 26-30

Fig. 7046 Clamp-T, Grooved Branch . . . . . 31-33

Fig. 7047, 7048 & 7049 Clamp-T, Cross . . . . 34

Fig. 7044 Branch Outlet . . . . . . . . . . . . . . . . .35

fittings foR gRooved-end PiPe

Fig. 7050 90° Elbow . . . . . . . . . . . . . . . . . . . .36

Fig. 7051 45° Elbow . . . . . . . . . . . . . . . . . . . . .37

TABLE OF CONTENTS

Fig. 7052 221⁄2° Elbow . . . . . . . . . . . . . . . . . . 38

Fig. 7053 111⁄4° Elbow . . . . . . . . . . . . . . . . . . .39

Fig. 7050LR 90° Long Radius Elbow . . . . . . . 40

Fig. 7051LR 45° Long Radius Elbow. . . . . . . . .41

Fig. 7063 Tee w/Threaded Branch . . . . . . . . . 42

Fig. 7061 Reducing Tee Standard. . . . . . . . 43-45

Fig. 7064 Reducing Tee w/Thd Branch . . . .46-47

Fig. 7060 Tee . . . . . . . . . . . . . . . . . . . . . . . . . 48

Fig. 7076 Gr x Thd Concentric Reducers . . . . 49

Fig. 7073 & Fig. 7097 Eccentric Reducers . 50-51

Fig. 7077, 7078 & 7079 Swaged Nipples . . . . .52

Fig. 7072 Gr x Gr Concentric Reducers . . .53-54

Fig. 7069 45° Lateral . . . . . . . . . . . . . . . . . . . .55

Fig. 7070 45° Reducing Lateral . . . . . . . . .56-57

Fig. 7066 Tee Wye . . . . . . . . . . . . . . . . . . . 58-59

Fig. 7067 Reducing Tee Wye . . . . . . . . . . . . . 60

Fig. 7071 True Wye . . . . . . . . . . . . . . . . . . . . .61

Fig. 7055 GR x MPT 90° Adapter Elbow . . . . 62

Fig. 7056 GR x MPT 45° Adapter Elbow . . . . 62

Fig. 7087 GR x FPT Female Thread Adapter . 63

Fig. 7050RF Grooved x 150# Flanged . . . . . . 63

Fig. 7084 Gr x Fl Nipples . . . . . . . . . . . . . . . . 64

Fig. 7085 Gr x Fl Nipples . . . . . . . . . . . . . . . . 64

Fig. 7074 Cap . . . . . . . . . . . . . . . . . . . . . . . . 65

Fig. 7075 Bull Plug . . . . . . . . . . . . . . . . . . . . . 66

Fig. 7068 Cross . . . . . . . . . . . . . . . . . . . . . . . 66

Fig. 7086 Gr x HOSE Nipples . . . . . . . . . . . . .67

Fig. 7080 Adapter Nipples Gr x Gr . . . . . . . . .67

Fig. 7081 Adapter Nipples Gr x MPT . . . . . . . .67

Fig. 7082 Adapter Nipples Gr x BEV . . . . . . . .67

Fig. 7062 Bullhead Tee Specialty Tees . . . . . 68

Fig. 7065 Standpipe Tee . . . . . . . . . . . . . . . . 68

4 www.anvilintl.com

Fig. 7050DR 90° Drain Elbow . . . . . . . . . . . . 69

Fig. 7091 End of the Line . . . . . . . . . . . . . . . . .70

Fig. 7450 90° Short Pattern Elbow . . . . . . . . .71

Fig. 7460 Short Pattern Tee . . . . . . . . . . . . . . .71

Fig. 7050-3D 90° Elbow . . . . . . . . . . . . . . . . 72

Fig. 7057-3D 60° Elbow . . . . . . . . . . . . . . . . . 72

Fig. 7051-3D 45° Elbow . . . . . . . . . . . . . . . . . 73

Fig. 7058-3D 30° Elbow . . . . . . . . . . . . . . . . 73

Fig. 7052-3D 221⁄2° Elbow . . . . . . . . . . . . . . . .74

Fig. 7053-3D 111⁄4° Elbow . . . . . . . . . . . . . . . .74

Fig. 7050-5D 90° Elbow . . . . . . . . . . . . . . . . .75

Fig. 7057-5D 60° Elbow . . . . . . . . . . . . . . . . . .75

Fig. 7051-5D 45° Elbow . . . . . . . . . . . . . . . . . .76

Fig. 7058-5D 30° Elbow . . . . . . . . . . . . . . . . .76

Fig. 7052-5D 221⁄2° Elbow . . . . . . . . . . . . . . . 77

Fig. 7053-5D 111⁄4° Elbow . . . . . . . . . . . . . . . 77

Fig. 7050-6D 90° Elbow . . . . . . . . . . . . . . . . .78

Fig. 7057-6D 60° Elbow . . . . . . . . . . . . . . . . .78

Fig. 7051-6D 45° Elbow . . . . . . . . . . . . . . . . . 79

Fig. 7058-6D 30° Elbow . . . . . . . . . . . . . . . . 79

Fig. 7052-6D 221⁄2° Elbow . . . . . . . . . . . . . . . 80

Fig. 7053-6D 111⁄4° Elbow . . . . . . . . . . . . . . . 80

vAlves & ACCessoRies

Series 7700 Butterfly Valve . . . . . . . . . . . . 81-82

Series 7600 Butterfly Valve . . . . . . . . . . . . . . 83

Series 8000GR Butterfly Valve . . . . . . . . . . . 84

Series 171 Brass Ball Valve . . . . . . . . . . . . .85-86

Series 7500 Ball-valves . . . . . . . . . . . . . . .87-88

Fig. 400G Silent Check Valve . . . . . . . . . . . . 89

Next Page

Previous Page

Return

tABle of Contents Cont'd.

Series 7800 Check Valves . . . . . . . . . . . . . . . 90

GBV-G & GBV-A Balancing Valves . . . . . . 91-92

GBV-S & GBV-T Globe Valves . . . . . . . . . . . . .93

FTV-S & FTV-A Tri-Service Valves . . . . . . .94-97

Fig. 7260 Tee Strainer . . . . . . . . . . . . . . . . 98-99

Model 758G Grooved-End “Wye” Strainer . 100
Model 768G Grooved-end “Wye” Strainer . .101

Fig. 7250 Suction Diffuser . . . . . . . . . . . 102-104

Models GAV-15 Automatic Air Vents . . . . . .105

Models GAV-30 Automatic Air Vents . . . . 106

Fig. AF21-GG Gr x Gr Flex Connector . . . . .107

Fig. AF21-GF Gr x Fl Flex Connectors . . . . . 108

Fig. AF21-FF Fl x Fl Flex Connectors . . . . . . .109

high PRessuRe systeMs

Fig. 7004 HPR® Coupling . . . . . . . . . . . . . . .110

Fig. 7004 EG® End Guard® Coupling . . . . . . . 111

Fig. 7050 EG High Pressure 90° LR Elbow . . .112
Fig. 7051 EG High Pressure 45° LR Elbow . . .112

Fig. 7060 EG High Pressure Tee. . . . . . . . . . .112

Fig. 7022 EG High-pressure Header Tee . . . .112

Fig. 7068 EG High Pressure Cross . . . . . . . . .111

gRuvloK® AdvAnCed CoPPeR Method

Fig. 7400 Rigidlite® Coupling . . . . . . . . . . . . . 113

Fig. 7012 Gruvlok Flanges . . . . . . . . . . . 114-115

Fig. 7550 90° Elbow . . . . . . . . . . . . . . . . . . .116

Fig. 7551 45° Elbow . . . . . . . . . . . . . . . . . . . .116

Fig. 7560 Tees . . . . . . . . . . . . . . . . . . . . . . . .116

Fig. 7572 (Gr x Gr) Concentric Reducer . . . .117

Fig. 7561A (Gr x Gr x Gr) Reducing Tee . . . .118

ANVIL PIPE FITTERS HANDBOOK 5

Fig. 7574 End Caps . . . . . . . . . . . . . . . . . . . .110

Fig. 7564A Reducing Tee . . . . . . . . . . . . . . . . 118

Fig. 7575 Reducing Adapter . . . . . . . . . . . . . .120

Fig. 7582 Transition Fitting . . . . . . . . . . . . . . .120

Series 7500B Bronze Ball Valve . . . . . . . 121-122

gRuvloK di-loK® niPPles

Fig. 7088 - Groove by Thread . . . . . . . . . . . .123

Fig. 7089 - Groove by Groove . . . . . . . . . . . .123

Fig. 7090 - Thread by Thread . . . . . . . . . . . .123

gRuvloK PlAin-end fittings

Fig. 7005 Roughneck® Coupling . . . . . . . . . .124

Fig. 7050P 90° Elbow . . . . . . . . . . . . . . . . . .125

Fig. 7051P 45° Elbow . . . . . . . . . . . . . . . . . . .125

Fig. 7060P Tee . . . . . . . . . . . . . . . . . . . . . . . .125

Fig. 7068P Cross . . . . . . . . . . . . . . . . . . . . . .126

Fig. 7061P Reducing Tee . . . . . . . . . . . . . . . .127

Fig. 7069P 45° Lateral . . . . . . . . . . . . . . . . . .126

Fig. 7071P 90° True Wye . . . . . . . . . . . . . . . .126

Fig. 7050LRP 90° LR Elbow . . . . . . . . . . . . . .128

Fig. 7051LRP 45° LR Elbow . . . . . . . . . . . . . .128

Fig. 7084P & Fig. 7085P Flange Nipples . . . .129

Fig. 7075P Bull Plug . . . . . . . . . . . . . . . . . . . .128

Fig. 7080P Plain x Grooved . . . . . . . . . . . . . .129

Fig. 7081P Plain x Thread . . . . . . . . . . . . . . .129

Fig. 7082P Plain x Bevel . . . . . . . . . . . . . . . .129

Fig. 7077P Swaged Nipples . . . . . . . . . . . . . .130

hdPe CouPlings

Fig. 7305 HDPE Coupling . . . . . . . . . . . . . . .131

Fig. 7307 HDPE Transition Coupling . . . . . . .131

Fig. 7312 HDPE Flange Adapter . . . . . . . . . . .132

®

soCK-it

Fig. 7100 90° Elbow . . . . . . . . . . . . . . . . . . .133

Fig. 7101 90° Reducing Elbow . . . . . . . . . . .135

Fig. 7103 Straight Tee . . . . . . . . . . . . . . . . . . .134

Fig. 7105 Reducing Outlet Tee . . . . . . . . . . .136

Fig. 7106 Reducing Tee . . . . . . . . . . . . . . . .137

Fig. 7107 Coupling . . . . . . . . . . . . . . . . . . . . .138

PiPing Method fittings

stAinless steel Method

Fig. 7400SS Rigidlite® Coupling . . . . . . . . . . .139

Series 7500SS Grooved-End Ball Valve . 140-141

Fig. 7050SS 90° SS Elbow . . . . . . . . . . . . . . .142

Fig. 7051SS 45° SS Elbow . . . . . . . . . . . . . . . .142

Fig. 7060SS SS Tees . . . . . . . . . . . . . . . . . . . .143

Fig. 7074SS SS Caps . . . . . . . . . . . . . . . . . . . .143

Fig. 7061SS SS Reducing Tees . . . . . . . . . . . .144

Fig. 7072SS SS Concentric Reducers . . . . . . .145

Roll gRooveR s

Model 1007 & 3007 Roll Groovers . . . . . . . .146

Model 3006 & 3006C Roll Groovers . . . . . .147

fitting o.d. size ChARt & flow dAtA . . . . . . . . 148

listings And APPRovAls . . . . . . . . . . . . . . . . . . . 315

Note: Ever y effor t has been made to assure the

accuracy of dimension data. We cannot accept
responsibility for inaccuracies resulting from unde ­tected errors or omissions. Contact your Anvil Rep.
to verify information.

TABLE OF CONTENTS

Couplings

Y

X

Z

Y

X

Z

Y

X

Z

Next Page

Previous Page

Return

fig. 7001

Standard Coupling

Nom.

O.D.

Size

In./

In./mm PSI/bar Lbs./kN In./mm Degrees

®

SIZES 1" - 14"

DN(mm)

1 1.315 1000 1,358 0-1⁄8 5° 26' 1.14 21⁄2 41⁄2 17⁄8 23⁄8 x 21⁄4 30 45 1.3

25 33.4 68.9 6.04 0-3.2 94.7 64 114 48 M10 x 57 40 60 0.6

11⁄4 1.660 1000 2,164 0-1⁄8 4° 19' 0.90 23⁄4 41⁄2 17⁄8 23⁄8 x 21⁄4 30 45 1.4

32 42.2 68.9 9.63 0-3.2 75.3 70 114 48 M10 x 57 40 60 0.6

11⁄2 1.900 1000 2,835 0-1⁄8 3° 46' 0.79 3 45⁄8 17⁄8 23⁄8 x 21⁄4 30 45 1.5

40 48.3 68.9 12.61 0-3.2 65.7 76 117 48 M10 x 57 40 60 0.7

2 2.375 1000 4,430 0-1⁄8 3° 1' 0.63 35⁄8 61⁄8 17⁄8 21⁄2 x 3 80 100 3.1

SIZES 16" - 24"

GRUVLOK

50 60.3 68.9 19.71 0-3.2 52.6 92 156 48 M12 x 76 110 150 1.4

21⁄2 2.875 1000 6,492 0-1⁄8 2° 29' 0.52 41⁄4 61⁄2 17⁄8 21⁄2 x 3 80 100 3.7

65 73.0 68.9 28.88 0-3.2 43.3 108 165 48 M12 x 76 110 150 1.7

3 O.D. 2.996 1000 7,050 0-1⁄8 2° 23' 0.50 41⁄4 63⁄4 17⁄8 21⁄2 x 3 80 100 4.3

76.1 76.1 68.9 31.36 0-3.2 41.6 108 171 48 M12 x 76 110 150 2.0
3 3.500 1000 9,621 0-1⁄8 2° 3' 0.43 47⁄8 71⁄8 17⁄8 21⁄2 x 3 80 100 4.3

80 88.9 68.9 42.80 0-3.2 35.8 124 181 48 M12 x 76 110 150 2.0

6 www.anvilintl.com

SIZES 28" - 30"

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

31⁄2 4.000 1000 12,566 0-1⁄8 1° 48' 0.38 51⁄4 81⁄4 17⁄8 25⁄8 x 31⁄2 100 130 5.1

65 101.6 68.9 55.90 0-3.2 31.4 133 210 48 M16 x 89 135 175 2.3

4 4.500 1000 15,904 0-1⁄4 3° 11' 0.67 61⁄4 83⁄4 2 25⁄8 x 31⁄2 100 130 6.8

100 114.3 68.9 70.75 0-6.4 55.5 159 222 51 M16 x 89 135 175 3.1

figuRe 7001 stAndARd CouPling diMensions (Continued on next PAge)

Max.

Work.

Pressure

Max.

End

Load

Separation

Deflection from Coupling Dimensions

Range of
Pipe End

Per

of Pipe X Y Z Qty. Size Min. Max.

Coupling

In./ft.­mm/m

Dimensions*

In./mm In./mm In./mm In./mm Ft.-Lbs./N-M Lbs./kN

Bolt

Specified
Torque §

Approx.

Wt. Ea.

Y

X

Z

Y

X

Z

Y

X

Z

Next Page

Previous Page

Return

Couplings

fig. 7001, Cont'd.

Standard Coupling

Nom.

O.D.

Size

In./

In./mm PSI/bar Lbs./kN In./mm Degrees

DN(mm

SIZES 1" - 14"

)

5 5.563 1000 24,306 0-1⁄4 2° 35' 0.54 71⁄4 111⁄4 2 23⁄4 x 41⁄2 130 180 9.6

125 141.3 68.9 108.12 0-6.4 45.1 184 286 51 M20 x 110 175 245 4.4

61⁄2 O.D. 6.500 1000 33,183 0-1⁄4 2° 12' 0.46 81⁄4 113⁄4 2 23⁄4 x 41⁄2 130 180 11.8

165.1 165.1 68.9 147.61 0-6.4 38.4 210 298 51 M20 x 110 175 245 5.4
6 6.625 1000 34,472 0-1⁄4 2° 10' 0.45 85⁄8 113⁄4 2 23⁄4 x 41⁄2 130 180 11.8

150 168.3 68.9 153.34 0-6.4 37.8 219 298 51 M20 x 110 175 245 5.4

8 8.625 800 46,741 0-1⁄4 1° 40' 0.35 11 143⁄8 23⁄8 27⁄8 x 51⁄2 180 220 21.7

SIZES 16" - 24"

200 219.1 55.2 207.91 0-6.4 29.1 279 365 60 M22 x 140 245 300 9.8

10 10.750 800 72,610 0-1⁄4 1° 20' 0.28 131⁄8 165⁄8 25⁄8 27⁄8 x 51⁄2 180 220 27.0

250 273.0 55.2 322.99 0-6.4 23.3 333 422 67 M22 x 140 245 300 12.2

12 12.750 800 102,141 0-1⁄4 1° 7' 0.23 151⁄2 185⁄8 25⁄8 27⁄8 x 6 180 220 35.0

300 323.9 55.2 454.35 0-6.4 19.5 394 473 67 M22 x 150 245 300 15.9

14 14.000 300 46,181 0-1⁄4 1° 2' 0.22 161⁄8 201⁄2 3 27⁄8 x 51⁄2 180 220 37.0

350 355.6 20.7 205.43 0-6.4 18.0 410 521 76 M22 x 140 245 300 16.8

SIZES 28" - 30"

16 16.000 300 60,319 0-1⁄4 0° 54' 0.19 181⁄8 227⁄8 3 4 1 x 4 200 250 50.0

400 406.4 20.7 268.31 0-6.4 15.7 460 581 76 * - - 22.7

18 18.000 300 76,341 0-1⁄4 0° 48' 0.17 211⁄8 253⁄8 31⁄8 4 1 x 4 200 250 72.0

450 457.2 20.7 339.58 0-6.4 14.0 537 645 79 * - - 32.7

ANVIL PIPE FITTERS HANDBOOK 7

figuRe 7001 stAndARd CouPling diMensions (Continued on next PAge)

Max.

Max.

Work.

End

Pressure

Load

Separation

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Deflection from Coupling Dimensions

Range of
Pipe End

Per

of Pipe X Y Z Qty. Size Min. Max.

Coupling

In./ft.­mm/m

In./mm In./mm In./mm In./mm Ft.-Lbs./N-M Lbs./kN

Bolt

Dimensions*

Specified
Torque §

Approx.

Wt. Ea.

®

GRUVLOK

Couplings

Y

X

Z

Y

X

Z

Y

X

Z

Next Page

Previous Page

Return

fig. 7001, Cont'd.

Standard Coupling

®

SIZES 1" - 14"

SIZES 16" - 24"

GRUVLOK

figuRe 7001 stAndARd CouPling diMensions (Continued fRoM PRevious PAge)

Max.

Nom.

O.D.

Size

In./

In./mm PSI/bar Lbs./kN In./mm Degrees

DN(mm

)

Work.

Pressure

Max.

End

Load

Range of
Pipe End

Separation

Deflection

from

Per

Coupling

Coupling Dimensions

C

L

Per.

X Y Z Qty. Size Min. Max.

In/Ft.

In./ft.-

In./mm In./mm In./mm In./mm Ft.-Lbs./N-M Lbs./kN

mm/m

20 20.000 300 94,248 0-1⁄4 0° 43' 0.15 23 281⁄4 31⁄8 4 11⁄8 x 41⁄2 225 275 82.0

500 508.0 20.7 419.23 0-6.4 12.5 584 718 79 * - - 37.2

24 24.000 300 135,717 0-1⁄4 0° 36' 0.13 27 323⁄8 31⁄8 4 11⁄8 x 41⁄2 225 275 90.0

600 609.6 20.7 603.70 0-6.4 10.5 686 822 79 * - - 40.8

28" O.D. 28.875 150 98,226 0-1⁄4 0° 33' 0.12 331⁄2 351⁄2 31⁄8 6 1 x 51⁄2 200 250 105.0

733.4 733.4 10.3 436.93 0-6.4 9.6 851 902 79 * - - 47.6

30" O.D. 31.00 150 113,215 0-1⁄4 0° 28' 0.10 333⁄4 381⁄4 35⁄8 6 1 x 51⁄2 200 250 137.0

787.4 787.4 10.3 503.61 0-6.4 8.1 857 972 92 * - - 62.1

* Available in ANSI or metric bolt sizes only as indicated.
For additional details see “Coupling Data Chart Notes” on page 264.

§ – For additional Bolt Torque information on page 202.
See Installation & Assembly directions on pages 150-151.
Not for use in copper systems.

Bolt

Dimensions*

Specified
Torque §

Approx.

Wt. Ea.

8 www.anvilintl.com

SIZES 28" - 30"

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

fig. 7011

Z

Y

X

Next Page

Previous Page

Return

Standard Coupling

Couplings

®

Max.

figuRe 7011 stAndARd CouPling

Max.

Nominal

Size

In./DN(mm) In./mm PSI/bar Lbs./kN In./mm Degrees mm/m In./mm In./mm In./mm In./mm Ft.-Lbs./M-M Lbs./Kg

O.D.

Working

Pressure

End

Load

Range of
Pipe End

Separation

Deflection from

Per Coupling Per in./ft. X Y Z Qty. Size Min. Max.

C

Coupling Dimensions Coupling Bolts* Specified

L

Approx.
Wt. Ea.

30 O.D. 30.000 300 212,058 0 -3⁄16 0° 40' 0.14 34 391⁄2 5 6 11⁄4 x 43⁄8 600 800 200

750 762.0 20.7 943.2 0 - 4.8 11.5 864 1003 127 – - - 90.9

Working pressure and end load values are for standard wall pipe.
Roll and Cut Grooving Specifications can be found in the technical data section.
See technical data section for design factors.
For additional details see “Coupling Data Chart Notes” on page 264.

§ – For additional Bolt Torque information on page 202.
* Available in ANSI bolt sizes only as indicated.
See Installation & Assembly directions on pages 152-153.

ANVIL PIPE FITTERS HANDBOOK 9

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

GRUVLOK

Couplings

Y

Z

X

Y

Z

X

Y

Z

X

Next Page

Previous Page

Return

fig. 7401

rigidlok® Coupling

Nominal

In./DN(mm) In./mm PSI/bar Lbs./kN In./mm

®

11⁄2" - 14"

O.D.

Size

11⁄2 1.900 750 2,126 0 -1⁄8 3 51⁄8 17⁄8 23⁄8 x 21⁄4 30 45 1.8

40 48.3 51.7 9.46 0 - 3.2 76 130 48 M10 x 57 40 60 0.8

2 2.375 750 3,323 0 -1⁄8 31⁄2 55⁄8 17⁄8 23⁄8 x 21⁄2 30 45 2.4

50 60.3 51.7 14.78 0 - 3.2 89 143 48 M10 x 63 40 60 1.1

21⁄2 2.875 750 4,869 0 -1⁄8 4 61⁄8 17⁄8 23⁄8 x 21⁄2 30 45 2.9

65 73.0 51.7 21.66 0 - 3.2 102 156 48 M10 x 63 40 60 1.3

3 O.D. 2.996 750 5,207 0 -1⁄8 41⁄8 61⁄8 17⁄8 2

76.1 76.1 51.7 23.52 0 - 3.2 105 156 48 M12 x 76 110 150 1.5
3 3.500 750 7,216 0 -1⁄8 43⁄4 71⁄4 17⁄8 2

80 88.9 51.7 32.10 0 - 3.2 121 184 48 M12 x 76 110 150 1.6

4 4.500 750 11,928 0 -1⁄4 57⁄8 83⁄8 21⁄8 2

GRUVLOK

16"

100 114.3 51.7 53.06 0 - 6.4 149 213 54 M12 x 76 110 150 2.3

51⁄2 O.D. 5.500 750 17,819 0 -1⁄4 7 93⁄4 21⁄8 25⁄8 x 31⁄2 100 130 6.9

139.7 139.7 51.7 79.26 0 - 6.4 178 248 54 M16 x 85 135 175 3.1
5 5.563 750 18,229 0 -1⁄4 7 10 21⁄8 25⁄8 x 31⁄2 100 130 6.9

125 141.3 51.7 81.09 0 - 6.4 178 254 54 M16 x 85 135 175 3.1

61⁄2 O.D. 6.500 750 24,887 0 -1⁄4 8 11 21⁄8 25⁄8 x 31⁄2 100 130 7.6

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

10 www.anvilintl.com

18" - 24"

165.1 165.1 51.7 110.70 0 - 6.4 203 279 54 M16 x 85 135 175 3.4
6 6.625 750 25,854 0 -1⁄4 81⁄8 111⁄8 21⁄8 25⁄8 x 31⁄2 100 130 7.9

150 168.3 51.7 115.00 0 - 6.4 206 283 54 M16 x 85 135 175 3.6

figuRe 7401 RigidloK CouPling (Continued on next PAge)

Max.

Max.
Working
Pressure

End

Load

Range of
Pipe End

Separation

Coupling Dimensions Coupling Bolts*

X Y Z

In./mm In./mm In./mm

Specified

Qty. Size Min. Max.

In./mm Ft.-Lbs./N-M Lbs./Kg

1

1

1

Torque §

⁄2 x 3 80 100 3.4

⁄2 x 3 80 100 3.6

⁄2 x 3 80 100 5.0

Approx.

Wt. Ea.

Y

Z

X

Y

Z

X

Y

Z

X

Next Page

Previous Page

Return

Couplings

fig. 7401, Cont'd.

rigidlok® Coupling

Nominal

In./DN(mm) In./mm PSI/bar Lbs./kN In./mm

Size

O.D.

8 8.625 600 35,056 0 -1⁄4 101⁄2 141⁄8 25⁄8 23⁄4 x 41⁄2 130 180 15.9

200 219.1 51.7 155.94 0 - 6.4 267 359 67 M20 x 110 175 245 7.2

11⁄2" - 14"

10 10.750 500 45,381 0 -1⁄4 127⁄8 171⁄2 25⁄8 2 1 x 6 200 250 25.6

250 273.1 51.7 201.87 0 - 6.4 327 445 67 M24 x 150 270 340 11.6

12 12.750 400 51,070 0 -1⁄4 15 191⁄2 25⁄8 27⁄8 x 6 180 220 30.5

300 323.9 51.7 227.17 0 - 6.4 381 495 67 M22 x 150 245 300 13.8

14 14.000 300 46,181 0 -1⁄4 161⁄4 193⁄4 3 27⁄8 x 51⁄2 180 220 36.1

350 355.6 20.7 205.43 0 - 6.4 413 502 76 245 300 16.4

16 16.000 300 60,319 0 -1⁄4 181⁄8 221⁄4 3 37⁄8 x 51⁄2 180 220 42.0

400 406.4 20.7 268.31 0 - 6.4 460 565 76 245 300 19.1

18 18.000 300 76,341 0 -1⁄4 201⁄2 243⁄8 31⁄8 4 1 x 4 200 250 51.6

16"

450 457.2 20.7 339.58 0 - 6.4 521 619 79 270 340 23.4

20 20.000 300 94,248 0 -1⁄4 23 267⁄8 31⁄8 4 1 x 4 200 250 68.3

500 508.0 20.7 419.23 0 - 6.4 581 683 79 270 340 31.0

24 24.000 250 113,097 0 -1⁄4 271⁄8 307⁄8 31⁄8 4 1 x 4 200 250 89.3

600 609.6 17.2 503.08 0 - 6.4 689 784 79 270 340 40.5

* Available in ANSI or metric bolt sizes only as indicated.

18" - 24"

Not for use in copper systems.
For additional details see “Coupling Data Chart Notes” on page 264.

§ – For additional Bolt Torque information on page 202.
See Installation & Assembly directions on pages 154-155.

ANVIL PIPE FITTERS HANDBOOK 11

figuRe 7401 RigidloK CouPling (Continued fRoM next PAge)

Max.

Max. End

Working
Pressure

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Load

Range of

Pipe End

Separation

Coupling Dimensions Coupling Bolts*

X Y Z

In./mm In./mm In./mm

Qty. Size Min. Max.

In./mm Ft.-Lbs./N-M Lbs./Kg

Specified
Torque §

Approx.

Wt. Ea.

®

GRUVLOK

Couplings

Y

Z

X

Next Page

Previous Page

Return

fig. 7000

lightweight Flexible Coupling

figuRe 7000 CouPling (Continued on next PAge)

Max.

Max.

Nom.

O.D.

Size

®

In./

DN(mm)

Working
Pressure

In./mm PSI/bar Lbs./kN In./mm Degrees mm/m In./mm In./mm In./mm In./mm Ft.-Lbs./N-M Lbs./Kg

1 1.315 600 815 0 -1⁄8 5° 26' 1.14 23⁄8 41⁄4 13⁄4 23⁄8 x 21⁄4 30 45 1.3

25 33.4 41.4 3.62 0 - 3.2 94.7 60 108 44 M10 x 57 40 60 0.6

11⁄4 1.660 600 1,299 0 -1⁄8 4° 19' 0.90 23⁄4 43⁄8 13⁄4 23⁄8 x 21⁄4 30 45 1.4

32 42.2 41.4 5.78 0 - 3.2 75.3 70 111 44 M10 x 57 40 60 0.6

11⁄2 1.900 600 1,701 0 -1⁄8 3° 46' 0.79 3 45⁄8 13⁄4 23⁄8 x 21⁄4 30 45 1.5

40 48.3 41.4 7.57 0 - 3.2 65.7 76 117 44 M10 x 57 40 60 0.7

2 2.375 600 2,658 0 -1⁄8 3° 1' 0.63 31⁄2 51⁄2 13⁄4 23⁄8 x 21⁄4 30 45 1.7

50 60.3 41.4 11.82 0 - 3.2 52.6 89 140 44 M10 x 57 40 60 0.8

21⁄2 2.875 600 3,895 0 -1⁄8 2° 29' 0.52 4 53⁄4 13⁄4 23⁄8 x 21⁄4 30 45 1.9

65 73.0 41.4 17.33 0 - 3.2 43.3 102 146 44 M10 x 57 40 60 0.9

GRUVLOK

3 O.D. 2.996 600 4,230 0 -1⁄8 2° 23' 0.50 4 61⁄8 13⁄4 23⁄8 x 21⁄4 80 100 2.3

76.1 76.1 41.4 18.82 0 - 3.2 41.6 102 156 44 M10 x 57 110 150 1.0
3 3.500 600 5,773 0 -1⁄8 2° 3' 0.43 45⁄8 63⁄4 13⁄4 21⁄2 x 23⁄4 80 100 2.9

80 88.9 41.4 25.68 0 - 3.2 35.8 117 171 44 M12 x 70 110 150 1.3

31⁄2 4.000 600 7,540 0 -1⁄8 1° 48' 0.38 51⁄8 75⁄8 13⁄4 21⁄2 x 3 80 100 3.1

90 101.6 41.4 33.54 0 - 3.2 31.4 130 194 44 M12 x 76 110 150 1.4

41⁄4 O.D. 4.250 600 8,512 0 -1⁄4 3° 22' 0.70 51⁄2 73⁄4 2 21⁄2 x 3 80 100 4.0

108.0 108.0 41.4 37.86 0 - 6.4 58.7 140 197 51 M12 x 76 110 150 1.8
4 4.500 600 9,543 0 -1⁄4 3° 11' 0.67 57⁄8 81⁄8 2 21⁄2 x 3 80 100 4.6

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

12 www.anvilintl.com

100 114.3 41.4 42.45 0 - 6.4 55.5 149 206 51 M12 x 76 110 150 2.1

End

Load

Range of
Pipe End

Separation

Deflection

from

Per

Coupling

C
L

in./ft.

Coupling

Dimensions

Per

X Y Z Qty. Size Min. Max.

Coupling Bolts

Specified
Torque §

Approx.

Wt.

Ea.

Y

Z

X

Next Page

Previous Page

Return

Couplings

fig. 7000, Cont'd.

lightweight Flexible Coupling

figuRe 7000 CouPling (Continued fRoM PRevious PAge)

Max.

Max.

Nom.

O.D.

Size

In./

DN(mm)

Working
Pressure

In./mm PSI/bar Lbs./kN In./mm Degrees mm/m In./mm In./mm In./mm In./mm Ft.-Lbs./N-M Lbs./Kg

51⁄4 O.D. 5.236 500 10,766 0 -1⁄4 2° 44' 0.57 61⁄2 91⁄8 2 25⁄8 x 31⁄2 100 130 5.7

133.0 133.0 34.5 47.89 0 - 6.4 47.7 165 232 51 M16 x 85 135 175 2.6

51⁄2 O.D. 5.500 500 11,879 0 -1⁄4 2° 36' 0.54 63⁄4 93⁄8 2 25⁄8 x 31⁄2 100 130 6

139.7 139.7 34.5 52.84 0 - 6.4 45.4 171 238 51 M16 x 85 135 175 2.7
5 5.563 500 12,153 0 -1⁄4 2° 35' 0.54 7 95⁄8 2 25⁄8 x 31⁄2 100 130 6.1

125 141.3 34.5 54.06 0 - 6.4 45.1 178 244 51 M16 x 85 135 175 2.8

61⁄4 O.D. 6.259 500 15,384 0 -1⁄4 2° 17' 0.48 71⁄2 103⁄8 2 25⁄8 x 31⁄2 100 130 6.7

159.0 159.0 34.5 68.43 0 - 6.4 39.8 191 264 51 M16 x 85 135 175 3.0

61⁄2 O.D. 6.500 500 16,592 0 -1⁄4 2° 12' 0.46 73⁄4 103⁄4 2 25⁄8 x 31⁄2 100 130 7.0

165.1 165.1 34.5 73.80 0 - 6.4 34.8 197 273 51 M16 x 85 135 175 3.2
6 6.625 500 17,236 0 -1⁄4 2° 10' 0.45 8 11 2 25⁄8 x 31⁄2 100 130 8.1

150 168.3 34.5 76.67 0 - 6.4 37.8 203 279 51 M16 x 85 135 175 3.7

8 8.625 500 29,213 0 -1⁄4 1° 40' 0.35 10 131⁄4 23⁄8 23⁄4 x 41⁄2 130 180 14.2

200 219.1 34.5 129.95 0 - 6.4 29.1 264 337 60 M20 x 110 175 245 6.4

For additional details see “Coupling Data Chart Notes” on page 264.

ANVIL PIPE FITTERS HANDBOOK 13

§ – For additional Bolt Torque information on page 202.
Not for use in copper systems.
See Installation & Assembly directions on page 156-157.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

End

Load

Range of
Pipe End

Separation

Deflection

from

Per

Coupling

C

L

in./ft.

Coupling

Dimensions

Per

X Y Z Qty. Size Min. Max.

Coupling Bolts

Specified
Torque §

Approx.

Wt.

Ea.

®

GRUVLOK

Couplings

Y

Z

X

Next Page

Previous Page

Return

fig. 7400

rigidlite® Coupling

figuRe 7400 Rigidlite® CouPling (Continued on next PAge)

Max.

Max.

Nominal

®

O.D.

Size

In./

DN(mm)

Wk.

Pressure

In./mm PSI/bar Lbs./kN In./mm In./mm In./mm In./mm In./mm Ft.-Lbs./N-M Lbs./Kg

1 1.315 300 407 0 -1⁄8 21⁄4 41⁄2 13⁄4 23⁄8 x 21⁄4 30 45 1.2

End

Load

Range of
Pipe End

Separation

25 33.4 20.7 1.81 0 - 3.2 57 114 44 M10 x 57 40 60 0.5

11⁄4 1.660 300 649 0 -1⁄8 25⁄8 43⁄4 13⁄4 23⁄8 x 21⁄4 30 45 1.3

32 42.2 20.7 2.89 0 - 3.2 67 121 44 M10 x 57 40 60 0.6

11⁄2 1.900 300 851 0 -1⁄8 27⁄8 47⁄8 13⁄4 23⁄8 x 21⁄4 30 45 1.4

40 48.3 20.7 3.78 0 - 3.2 73 124 44 M10 x 57 40 60 0.6

2 2.375 300 1,329 0 -1⁄8 31⁄4 51⁄2 13⁄4 23⁄8 x 21⁄4 30 45 1.6

50 60.3 20.7 5.91 0 - 3.2 83 140 44 M10 x 57 40 60 0.7

21⁄2 2.875 300 1,948 0 -1⁄8 37⁄8 6 13⁄4 23⁄8 x 21⁄4 30 45 1.9

65 73.0 20.7 8.66 0 - 3.2 98 152 44 M10 x 57 40 60 0.9

GRUVLOK

3 O.D. 2.996 300 2,115 0 -1⁄8 4 57⁄8 13⁄4 23⁄8 x 21⁄4 30 45 1.9

76.1 76.1 20.7 9.41 0 - 3.2 102 149 44 M10 x 57 40 60 0.9
3 3.500 300 2,886 0 -1⁄8 41⁄2 63⁄4 13⁄4 23⁄8 x 23⁄4 30 45 2.1

80 88.9 20.7 12.84 0 - 3.2 114 171 44 M10 x 70 40 60 1.0

4 4.500 300 4,771 0 -1⁄4 55⁄8 73⁄4 17⁄8 23⁄8 x 23⁄4 30 45 3.1

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

14 www.anvilintl.com

100 114.3 20.7 21.22 0 - 6.4 143 197 48 M10 x 70 40 60 1.4

Coupling Dimensions Coupling Bolts

X Y Z Qty. Size Min. Max.

Specified

Torque §

Approx.

Wt. Ea.

fig. 7400, Cont'd.

Y

Z

X

Next Page

Previous Page

Return

rigidlite® Coupling

Couplings

figuRe 7400 Rigidlite® CouPling (Continued fRoM PRevious PAge).

Max.

Max.

Nominal

O.D.

Size

In./

DN(mm)

Wk.

Pressure

In./mm PSI/bar Lbs./kN In./mm In./mm In./mm In./mm In./mm Ft.-Lbs./N-M Lbs./Kg

End

Load

Range of
Pipe End

Separation

51⁄2 O.D. 5.500 300 7,127 0 -1⁄4 63⁄4 91⁄4 2 21⁄2 x 3 80 100 4.5

139.7 139.7 20.7 31.70 0 - 6.4 171 235 51 M12 x 76 110 150 2.0
5 5.563 300 7,292 0 -1⁄4 67⁄8 91⁄4 2 21⁄2 x 3 80 100 4.6

125 141.3 20.7 32.44 0 - 6.4 175 235 51 M12 x 76 110 150 2.1

61⁄2 O.D. 6.500 300 9,955 0 -1⁄4 73⁄4 103⁄8 2 21⁄2 x 3 80 100 5.5

165.1 165.1 20.7 44.28 0 - 6.4 200 264 51 M12 x 76 110 150 2.5
6 6.625 300 10,341 0 -1⁄4 77⁄8 103⁄8 2 21⁄2 x 3 80 100 5.5

150 168.3 20.7 46.00 0 - 6.4 200 264 51 M12 x 76 110 150 2.5

8 8.625 300 17,528 0 -1⁄8 101⁄4 123⁄4 23⁄8 21⁄2 x 3 80 100 8.4

200 219.1 20.7 77.97 0 - 3.2 260 324 60 M12 x 76 110 150 3.8

For additional details see “Coupling Data Chart Notes” on page 264.

§ – For additional Bolt Torque information on page 202.
Not for use in copper systems.
See Installation & Assembly directions on pages 158-159.
Other sizes available, contact a Anvil Representative for more information.

Coupling Dimensions Coupling Bolts

X Y Z Qty. Size Min. Max.

Specified

Torque §

Approx.

Wt. Ea.

®

GRUVLOK

ANVIL PIPE FITTERS HANDBOOK 15

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Couplings

Y

X

Z

Next Page

Previous Page

Return

fig. 7003

hingelok® Coupling

Nominal

Size

In./DN(mm) In./mm PSI/bar Lbs./kN In./mm Degrees mm/m In./mm In./mm In./mm Lbs./Kg

O.D.

Max. Wk.

Pressure

11⁄2 1.900 300 851 0 -1⁄8 3° 46' 0.79 35⁄8 41⁄4 17⁄8 1.7

®

40 48.3 20.7 3.78 0 - 3.2 65.7 92 108 48 0.8

2 2.375 300 1,329 0 -1⁄8 3° 1' 0.63 41⁄4 47⁄8 17⁄8 2.2

50 60.3 20.7 5.91 0 - 3.2 52.6 108 124 48 1.0

21⁄2 2.875 300 1,948 0 -1⁄8 2° 29' 0.52 51⁄4 57⁄8 17⁄8 3.2

65 73.0 20.7 8.66 0 - 3.2 43.3 133 149 48 1.5

3 3.500 300 2,886 0 -1⁄8 2° 3' 0.43 55⁄8 61⁄2 17⁄8 3.6

80 88.9 20.7 12.84 0 - 3.2 35.8 143 165 48 1.6

SPECIAL NOTE:

Fig. 7003 Hingelok Couplings are not
designed for eccentric loading and
therefore are not recommended for

GRUVLOK

use at the end of concrete pumping
booms or vertical risers above 30
feet (9.1 meters). Shockload must
be considered and is to be included
in the maximum working pressure
listed above. Coupling keys, gasket
cavity, and pipe grooves must be
kept free of all foreign matter. Proper
anchoring practice must always be
exercised.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

16 www.anvilintl.com

4 4.500 300 4,771 0 -1⁄4 3° 11' 0.67 7 73⁄4 2 5.1

100 114.3 20.7 21.22 0 - 6.4 55.5 178 197 51 2.3

5 5.563 300 7,292 0 -1⁄4 2° 35' 0.54 85⁄8 91⁄2 21⁄8 9.5

125 141.3 20.7 32.44 0 - 6.4 45.1 219 241 54 4.3

6 6.625 300 10,341 0 -1⁄4 2° 10' 0.45 97⁄8 107⁄8 21⁄8 11.2

150 168.3 20.7 46.00 0 - 6.4 37.8 251 276 54 5.1

8 8.625 300 17,528 0 -1⁄4 1° 40' 0.35 12 131⁄8 21⁄2 18.1

200 219.1 20.7 77.97 0 - 6.4 29.1 305 333 64 8.2

For additional details see “Coupling Data Chart Notes”

on page 264.
Not for use in copper systems.
See Installation & Assembly directions on

pages 160-161

figuRe 7003 hingeloK CouPling

Max. End

Load

Range of Pipe

End Separation

Per Coupling Per in./ft. X Y Z

CAUTION: Hammering or banging on the handle or coupling housing

could cause serious damage to the locking device and coupling assembly.
The result may be an unsuitable pipe joint and unusable coupling assembly.
When re-using, always check for gasket damage, housing hinge and

handle for looseness, distortion bent or any other damage.

Deflection from

C

L Coupling Dimensions

Approx.

Wt. Ea.

fig. 7010

Y

Z

X

Gasket Center Rib

Reducing
Coupling Housing

Gasket

Next Page

Previous Page

Return

reduCing Coupling

Couplings

Fig. 7010

Coupling with Gasket

figuRe 7010 ReduCing CouPling (Continued on next PAge)

Max.

Max.

Nominal

In./DN(mm) In./mm In./mm PSI/bar Lbs./kN In./mm Degrees mm/m In./mm In./mm In./mm In./mm Ft.-Lbs./N-M Lbs./Kg

Size

Larger

O.D.

Smaller

O.D.

Working
Pressure

End

Load

Range of
Pipe End

Separation

Deflection from

Per

Coupling

C

L Coupling Dimensions Coupling Bolts Specified Approx.

Per

X Y Z Qty. Size Min. Max.

in./ft.

Wt.

Ea.

®

2 x 11⁄2 2.375 1.900 500 2,215 0 -1⁄8 1° 53' 0.39 35⁄8 57⁄8 17⁄8 21⁄2 x 23⁄4 80 100 2.0

50 x 40 60.3 48.3 34.5 9.85 0 - 3.2 32.9 92 149 48 M12 x 70 110 150 0.9

21⁄2 x 2 2.875 2.375 500 3,246 0 -1⁄8 1° 33' 0.32 41⁄4 63⁄8 17⁄8 21⁄2 x 23⁄4 80 100 3.5

65 x 50 73.0 60.3 34.5 14.44 0 - 3.2 27.0 108 162 48 M12 x 70 110 150 1.6

3 x 2 3.500 2.375 500 4,811 0 -1⁄8 1° 17' 0.27 47⁄8 71⁄8 17⁄8 21⁄2 x 23⁄4 80 100 4.4

80 x 50 88.9 60.3 34.5 21.40 0 - 3.2 22.4 124 181 48 M12 x 70 110 150 2.0

3 x 21⁄2 3.500 2.875 500 4,811 0 -1⁄8 1° 17' 0.27 47⁄8 71⁄8 17⁄8 21⁄2 x 23⁄4 80 100 4.1

80 x 65 88.9 73.0 34.5 21.40 0 - 3.2 22.4 124 181 48 M12 x 70 110 150 1.9

4 x 2 4.500 2.375 500 7,952 0 -3⁄16 2° 38' 0.55 61⁄4 87⁄8 2 25⁄8 x 31⁄2 100 130 8.9

100 x 50 114.3 60.3 34.5 35.37 0 - 4.8 45.9 159 225 51 M16 x 85 135 175 4.0

4 x 21⁄2 4.500 2.875 500 7,952 0 -3⁄16 2° 38' 0.55 61⁄4 87⁄8 2 25⁄8 x 31⁄2 100 130 7.9

100 x 65 114.3 73.0 34.5 35.37 0 - 4.8 45.9 159 225 51 M16 x 85 135 175 3.6

4 x 3 4.500 3.500 500 7,952 0 -3⁄16 2° 38' 0.55 61⁄4 87⁄8 2 25⁄8 x 31⁄2 100 130 6.7

100 x 80 114.3 88.9 34.5 35.37 0 - 4.8 45.9 159 225 51 M16 x 85 135 175 3.0

ANVIL PIPE FITTERS HANDBOOK 17

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

GRUVLOK

Couplings

Y

Z

X

Gasket Center Rib

Reducing
Coupling Housing

Gasket

Next Page

Previous Page

Return

fig. 7010, Cont'd.

reduCing Coupling

Fig. 7010

®

figuRe 7010 ReduCing CouPling (Continued fRoM PRevious PAge)

Max.

Nominal

In./DN(mm) In./mm In./mm PSI/bar Lbs./kN In./mm Degrees mm/m In./mm In./mm In./mm In./mm Ft.-Lbs./N-M Lbs./Kg

Size

Larger

O.D.

Smaller

O.D.

Working
Pressure

5 x 4 5.563 4.500 500 12,153 0 -1⁄4 2° 5' 0.44 71⁄4 105⁄8 21⁄8 23⁄4 x 41⁄2 130 180 11.4

125 x 100 141.3 114.3 34.5 54.06 0 - 6.4 36.4 184 270 54 M20 x 110 175 245 5.2

6 x 4 6.625 4.500 500 17,236 0 -1⁄4 1° 44' 0.36 81⁄4 115⁄8 21⁄8 23⁄4 x 41⁄2 130 180 13.4

150 x 100 168.3 114.3 34.5 76.67 0 - 6.4 30.2 210 295 54 M20 x 110 175 245 6.1

6 x 5 6.625 5.562 500 17,236 0 -1⁄4 1° 44' 0.36 81⁄2 115⁄8 21⁄8 23⁄4 x 41⁄2 130 180 13.5

GRUVLOK

150 x 125 168.3 141.3 34.5 76.67 0 - 6.4 30.2 216 295 54 M20 x 110 175 245 6.1

8 x 6 8.625 6.625 500 29,213 0 -1⁄4 1° 15' 0.26 101⁄2 14 21⁄4 23⁄4 x 41⁄2 130 180 17.7

200 x 150 219.1 168.3 34.5 129.95 0 - 6.4 21.8 267 356 57 M20 x 110 175 245 8.0

For additional details see “Coupling Data Chart Notes” on page 264.

§ – For additional Bolt Torque information on page 202.
Not for use in copper systems.
See Installation & Assembly directions on pages 162-163.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

18 www.anvilintl.com

Max.

End

Load

Coupling with Gasket

Range of
Pipe End

Separation

Deflection from

Per

Coupling

C

L Coupling Dimensions Coupling Bolts

Per

in./ft.

X Y Z Qty. Size Min. Max.

Specified
Torque §

Approx.

Wt.

Ea.

fig. 7012

Bmin.

A

max.

Z

Y

X

X

Y

Z

Next Page

Previous Page

Return

gruvlok FlangeS

Couplings

®

2"-12" sizes

14"-24" sizes

gRuvloK figuRe 7012 flAnge: (Continued on next PAge)

Max.

Nominal

Size

In./DN(mm)

Working

O.D.

Pressure

In./mm PSI/bar Lbs./kN In./mm Ft.-Lbs/N-M In./mm In./mm In./mm In./mm In./mm PN10 (16)

Max.

End

Load

Latch Bolt

Latch*

Bolt Size

Specified
Torque §

Min. Max. X Y Z A Max. B Min. Qty. ANSI Size (ANSI) Min. Max.

Dimensions Sealing Surface

2 2.375 300 1,3293⁄8 x 23⁄4 30 45 61⁄4 83⁄83⁄4 23⁄8 37⁄16 4

50 60.3 20.7 5.91 M10 x 70 40 60 159 213 19 60 87 4 M16 x 70 149 190 1.9

21⁄2 2.875 300 1,9483⁄8 x 23⁄4 30 45 7 91⁄23⁄4 27⁄8 4 4

65 73.0 20.7 8.66 M10 x 70 40 60 178 241 19 73 102 - M16 x 70 149 190 2.1

3 O.D. 2.996 300 2,115 - 30 45 71⁄4 93⁄43⁄4 3 41⁄8 - - 110 140 4.8

76.1 76.1 20.7 9.41 M10 x 70 40 60 184 248 19 76 105 4 M16 x 70 149 190 2.2
3 3.500 300 2,8863⁄8 x 23⁄4 30 45 77⁄8 101⁄23⁄4 31⁄2 49⁄16 4

88.9 88.9 20.7 12.84 M10 x 70 40 60 200 267 19 89 116 8 M16 x 70 149 190 2.7

4 4.500 300 4,7713⁄8 x 23⁄4 30 45 9 111⁄23⁄4 41⁄2 59⁄16 8

100 114.3 20.7 21.22 M10 x 70 40 60 229 292 19 114 141 8 M16 x 70 149 190 2.9

51⁄2 O.D. 5.500 300 7,127 - 30 45 97⁄8 127⁄87⁄8 59⁄16 63⁄4 - - 220 250 15.6

139.7 139.7 20.7 31.70 M10 x 70 40 60 251 327 22 141 171 8 M16 x 75 298 339 7.1

ANVIL PIPE FITTERS HANDBOOK 19

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Mating Flange Bolts

Mating Flange Bolts

in. (ISO) mm

5

⁄8 x 23⁄4 110 140 4.2

5

⁄8 x 23⁄4 110 140 4.6

5

⁄8 x 23⁄4 110 140 6.0

5

⁄8 x 23⁄4 110 140 6.3

Specified
Torque §

Ft.-Lbs/N-M Lbs./Kg

Approx.

Wt. Ea.

GRUVLOK

Couplings

Bmin.

A

max.

Z

Y

X

X

Y

Z

Next Page

Previous Page

Return

fig. 7012, Cont'd

gruvlok FlangeS

®

2"-12" sizes

gRuvloK figuRe 7012 flAnge: (Continued fRoM PRevious PAge)

Nominal

Size

In./DN(mm)

Max.

Working

O.D.

Pressure

In./mm PSI/bar Lbs./kN In./mm Ft.-Lbs/N-M In./mm In./mm In./mm In./mm In./mm PN10 (16)

Max.

End

Load

Latch Bolt

Specified

Latch*

Bolt Size

Torque §

Min. Max. X Y Z A Max. B Min. Qty. ANSI Size (ANSI) Min. Max.

Dimensions Sealing Surface

5 5.563 300 7,2923⁄8 x 23⁄4 30 45 10 121⁄27⁄8 59⁄16 63⁄4 8

125 141.3 20.7 32.44 M10 x 70 40 60 254 318 22 141 171 - - 298 339 4.0

61⁄2 O.D. 6.500 300 9,955 - 30 45 111⁄4 147⁄8 65⁄8 713⁄16 - - 220 250 9.7

GRUVLOK

165.1 165.1 20.7 44.28 M10 x 70 40 60 286 356 22 168 198 8 M20 x 80 298 339 4.4
6 6.625 300 10,3413⁄8 x 23⁄4 30 45 11 147⁄8 65⁄8 713⁄16 8

150 168.3 20.7 46.00 M10 x 70 40 60 279 356 22 168 198 8 M20 x 80 298 339 4.4

8 8.625 300 17,5283⁄8 x 23⁄4 30 45 131⁄2 161⁄2 1 85⁄8 10 8

200 219.1 20.7 77.97 M10 x 70 40 60 343 419 25 219 254 8 (12) M20 x 80 298 339 7.1

250 273.1 20.7 121.12 M10 x 70 40 60 406 483 25 273 308 12 M20 x 90 439 542 8.3

10 10.750 300 27,2293⁄8 x 23⁄4 30 45 16 19 1 103⁄4 121⁄8 12

12 12.750 300 38,3033⁄8 x 23⁄4 30 45 19 213⁄4 11⁄4 123⁄4 141⁄8 12

300 323.9 20.7 170.38 M10 x 70 40 60 483 552 32 324 359 12 - 439 542 13.6

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

20 www.anvilintl.com

14"-24" sizes

Mating Flange Bolts

Mating Flange Bolts

in. (ISO) mm

3

⁄4 x 27⁄8 220 250 8.8

3

⁄4 x 31⁄8 220 250 9.6

3

⁄4 x 31⁄4 220 250 15.6

7

⁄8 x 31⁄2 320 400 18.2

7

⁄8 x 33⁄4 320 400 29.9

Specified
Torque §

Ft.-Lbs/N-M Lbs./Kg

Approx.

Wt. Ea.

Next Page

Previous Page

Return

Couplings

fig. 7012, Cont'd.

gruvlok FlangeS

gRuvloK figuRe 7012 flAnge: (Continued fRoM PRevious PAge).

Max.

Nominal

Size

In./DN(mm)

Working

O.D.

Pressure

In./mm PSI/bar Lbs./kN In./mm Ft.-Lbs/N-M In./mm In./mm In./mm In./mm In./mm PN10 (16)

Max.

End

Load

Latch Bolt

Latch*

Bolt Size

Specified
Torque §

Min. Max. X Y Z A Max. B Min. Qty. ANSI Size (ANSI) Min. Max.

Dimensions Sealing Surface

12 (PN) 12.750 300 38,303 - 40 60 181⁄8 211⁄4 1 123⁄4 141⁄8 12 - 320 400 20.9

300 323.9 20.7 170.38 M10 x 70 30 45 460 540 25 324 359 12

14 14.000 300 46,1815⁄8 x 41⁄4 100 130 21 24 11⁄2 14 16 12 1 x 41⁄4 360 520 52.5

350 355.6 20.7 205.43 - 136 176 533 610 38 356 406 - - 488 705 23.8

16 16.000 300 60,3195⁄8 x 41⁄4 100 130 231⁄2 261⁄2 11⁄2 16 18 16 1 x 41⁄4 360 520 67.0

400 406.4 20.7 268.31 - 136 176 597 673 38 406 457 - - 488 705 30.4

18 18.000 300 76,3413⁄4 x 5 130 180 25 29 15⁄8 18 20 16 11⁄8 x 43⁄4 450 725 82.5

450 457.2 20.7 339.58 - 176 244 635 737 41 457 508 - – 610 983 37.4

20 20.000 300 94,2483⁄4 x 5 130 180 271⁄2 311⁄2 13⁄4 20 22 20 11⁄8 x 43⁄4 450 725 106.5

500 508.0 20.7 419.23 - 176 244 699 800 44 508 559 - – 610 983 48.3

24 24.000 250 113,0977⁄8 x 51⁄2 180 220 32 361⁄2 17⁄8 24 26 20 11⁄4 x 51⁄2 620 1,000 138.5

600 609.6 17.2 503.08 - 244 298 813 927 48 610 660 - - 841 1,356 62.8

 PN 16 uses M24 x 90 (PN) Dimensions for bolt circle PN 10 & 16 Flange.

* Available in ANSI or metric bolt sizes only as indicated.
 Based on use with standard wall pipe.

§ – For additional Bolt Torque information, see page 202
The Gruvlok Flange bolt hole pattern conforms to ANSI Class 150 & Class 125

flanges.

To avoid interference issues, flanges cannot be assembled directly to Series 7700

ANVIL PIPE FITTERS HANDBOOK 21

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

butterfly valve. Flange can be assembled to one side of series 7500 and 7600
valve only.

Mating flange bolts must be at least Intermediate Strength Bolting per ASME B16.5.

Bolts with material properties equal or greater than SAE J429 Grade 5 are acceptable.

Refer to Gruvlok Products Catalog or Anvil's web site for more information on

installing this flange.
See Installation & Assembly directions on pages 164-169.
For additional details see "Coupling Data Chart notes" on page 264.

Mating Flange Bolts

Mating Flange Bolts

in. (ISO) mm

M20 x 90 

Specified
Torque §

Ft.-Lbs/N-M Lbs./Kg

Approx.

Wt. Ea.

439 542 9.5

®

GRUVLOK

Couplings

X

Y

Z

Bmin.

A

max.

Next Page

Previous Page

Return

fig. 7013

gruvlok FlangeS
(#300 Flange)

Nominal

Size

In./DN(mm)

Max.

Wk.

Pressure

Max.

End

Load

O.D.

In./mm PSI/bar Lbs./kN In. Ft.-Lbs/N-M In./mm In./mm In./mm In./mm In./mm (ISO) mm Lbs./Kg

2 2.375 750 3,3233⁄8 x 21⁄2 30 45 61⁄2 8 1 23⁄8 37⁄16 85⁄8 x 3 5.0

®

50 60.3 51.7 14.78 - 165 203 25 60 87 - - 2.3

21⁄2 2.875 750 4,8693⁄8 x 21⁄2 30 45 71⁄2 91⁄8 1 27⁄8 4 83⁄4 x 31⁄4 6.9

65 73.0 51.7 21.66 - 191 232 25 73 102 - - 3.1

3 3.500 750 7,2163⁄8 x 21⁄2 30 45 81⁄4 97⁄8 11⁄8 31⁄2 49⁄16 83⁄4 x 31⁄2 9.4

80 88.9 51.7 32.10 - 210 251 29 89 116 - - 4.3

4 4.500 750 11,9283⁄8 x 21⁄2 30 45 10 113⁄8 11⁄4 41⁄2 55⁄8 83⁄4 x 33⁄4 14.4

100 114.3 51.7 53.06 - 254 289 32 114 143 - - 6.5

5 5.563 750 18,2293⁄8 x 21⁄2 30 45 11 125⁄8 13⁄8 59⁄16 63⁄4 83⁄4 x 41⁄2 18.3

125 141.3 51.7 81.09 - 279 321 35 141 171 - - 8.3

6 6.625 750 25,8543⁄8 x 21⁄2 30 45 121⁄2 141⁄8 11⁄2 65⁄8 713⁄16 123⁄4 x 41⁄2 24.9

150 168.3 51.7 115.00 - 318 359 38 168 198 - - 11.3

GRUVLOK

8 8.625 750 43,8201⁄2 x 31⁄2 80 100 15 167⁄8 15⁄8 85⁄8 10 127⁄8 x 43⁄4 35.4

200 219.1 51.7 194.92 - 381 429 41 219 254 - - 16.1

10 10.750 750 68,0721⁄2 x 31⁄2 80 100 171⁄2 193⁄8 17⁄8 103⁄4 121⁄8 16 1 x 5 54.0

250 273.1 51.7 302.80 - 445 492 48 273 308 - - 24.5

12 12.750 750 95,7571⁄2 x 31⁄2 80 100 201⁄2 221⁄2 2 123⁄4 143⁄16 16 11⁄8 x 53⁄4 74.8

300 323.9 51.7 425.95 - 521 572 51 324 360 - - 33.9

* Available in ANSI or metric bolt sizes only as indicated.
Effective sealing area of mating flange must be free from gouges, undulations or defor-

mities of any type to ensure proper sealing of the gasket.
Not for use with copper systems.
 Based on use with standard wall pipe.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

22 www.anvilintl.com

gRuvloK figuRe 7013 flAnge

Specified

Latch*

Torque §

Bolt

Min. Max. X Y Z A Max. B Min.

Size

Flange cannot be assembled directly to Series 7700 butterfly valve. Flange can be as-

sembled to one side of series 7500 & 7600 valve.
For Bolt Torque information, see page 202
For additional details see "Coupling Data Chart notes" on page 264.

Dimensions

Sealing
Surface

Qty.

ANSI

Mating

Flange Bolts

Size

(ANSI) in.

Approx.

Wt. Ea.

X

Y

NIPPLE

COUPLING

END
ADAPTER

GRUVLOK

4'' FIG. 7000

GRUVLOK

4'' FIG. 7000

GRUVLOK

4'' FIG. 7000

GRUVLOK

4'' FIG. 7000

GRUVLOK

4'' FIG. 7000

L

Next Page

Previous Page

Return

Couplings

fig. 7240

expanSion JointS

7240 PeRfoRMAnCe dAtA

Nominal

Size

In./DN(mm)

Coupling

O.D.

Figure

In./mm In./mm In./mm In./mm In./mm In./mm In./mm

X Y

Compressed

Length

2 2.375 7000 31⁄2 51⁄2 30 311⁄4

50 60.3 89 125 450 794 3.2 31.8

21⁄2 2.875 7000 4 53⁄4 30 311⁄4

65 73.0 100 146 450 794 3.2 31.8

3 3.500 7000 45⁄8 63⁄4 30 311⁄4

80 88.9 117 171 450 794 3.2 31.8

4 4.500 7000 57⁄8 81⁄8 171⁄2 183⁄4

100 114.3 149 206 445 476 6.4 31.8

5 5.562 7000 7 95⁄8 19 201⁄4

125 141.3 178 244 483 514 6.4 31.8

6 6.625 7000 8 11 19 201⁄4

150 168.3 200 279 483 514 6.4 31.8

8 8.625 7000 103⁄8 131⁄4 221⁄2 233⁄4

200 219.0 264 337 572 603 6.4 31.8

10 10.750 7001 127⁄8 171⁄2 231⁄2 243⁄4

250 273.1 327 445 597 629 6.4 31.8

12 12.750 7001 15 191⁄2 231⁄2 243⁄4

ANVIL PIPE FITTERS HANDBOOK 23

300 323.9 381 495 597 629 6.4 31.8

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Expanded

Length

L

L

Coupling
Movement
Capability

Number of

Couplings

1

⁄8 10 11⁄4

1

⁄8 10 11⁄4

1

⁄8 10 11⁄4

1

⁄4 5 11⁄4

1

⁄4 5 11⁄4

1

⁄4 5 11⁄4

1

⁄4 5 11⁄4

1

⁄4 5 11⁄4

1

⁄4 5 11⁄4

Total
Movement
Capability

®

GRUVLOK

Branch Outlets

F

Y

X

M

Y

X

Z

G

Y

X

Next Page

Previous Page

Return

fig. 7042

outlet Coupling

Nominal Pipe Size

FPTFMPT/Grv.

Run

®

Female IPS Outlet- 7042F

In./DN(mm) In./mm In./mm psi/bar Lbs./kN In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg

1

⁄2 — 500 14183⁄4-11⁄16 215⁄16 43⁄4 23⁄4 21⁄16 21⁄2 —3⁄8 x 21⁄8 2.6

15 — 34.5 6.31 19-27 75 121 70 52 64 — 1.2

3

11⁄2

⁄4 — 500 14183⁄4-11⁄16 215⁄16 43⁄4 23⁄4 21⁄16 21⁄2 —3⁄8 x 21⁄8 2.6

20 — 34.5 6.31 19-27 75 121 70 52 64 — 1.2

40

1 — 5 00 14183⁄4-11⁄16 215⁄16 43⁄4 23⁄4 115⁄16 21⁄2 —3⁄8 x 21⁄8 2.6

25 — 34.5 6.31 19-27 75 121 70 49 64 — 1.2

1

⁄2 — 500 221511⁄16-1 37⁄16 51⁄4 23⁄4 25⁄16 27⁄8 —3⁄8 x 21⁄8 3.3

15 — 34.5 9.85 17-25 87 133 70 59 73 — 1.5

3

2

⁄4 — 500 221511⁄16-1 37⁄16 51⁄4 23⁄4 25⁄16 27⁄8 —3⁄8 x 21⁄8 3.3

20 — 34.5 9.85 17-25 87 133 70 59 73 — 1.5

Male IPS Outlet - 7042M

GRUVLOK

50

1 1 500 221511⁄16-1 37⁄16 51⁄4 23⁄4 23⁄16 27⁄8 31⁄23⁄8 x 21⁄8 3.3

25 25 34.5 9.85 17-25 87 133 70 56 73 89 1.5

1

⁄2 — 500 3246 13⁄16-11⁄2 43⁄16 61⁄2 31⁄4 29⁄16 31⁄8 —1⁄2 x 23⁄8 4.8

15 — 34.5 14.44 30-38 106 165 83 65 79 — 2.2

3

⁄4 — 500 3246 13⁄16-11⁄2 43⁄16 61⁄2 31⁄4 29⁄16 31⁄8 —1⁄2 x 23⁄8 4.8

21⁄2

20 — 34.5 14.44 30-38 106 165 83 65 79 — 2.2

1 — 500 3246 13⁄16-11⁄2 43⁄16 61⁄2 31⁄4 27⁄16 31⁄8 —1⁄2 x 23⁄8 4.8

65

25 — 34.5 14.44 30-38 106 165 83 62 79 — 2.2

— 11⁄4 500 3246 13⁄16-11⁄2 43⁄16 61⁄2 31⁄4 — — 35⁄81⁄2 x 23⁄8 5.5

— 32 34.5 14.44 30-38 106 165 83 — — 92 2.5

Grooved Outlet - 7042G

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

24 www.anvilintl.com

See Installation & Assembly directions on pages 170-171.
For additional details see "Coupling Data Chart notes" on page 264.

figuRe 7042 - outlet CouPling (Continued on next PAge)

Max.

Outlet

M/G

Working
Pressure

Run End

Load

Range of
Pipe End

Separation

X Y Z

Coupling Dimensions

FPTFMPTMGrv.

Bolt
Size

G

Approx.

Wt.

Each

F

Y

X

M

Y

X

Z

G

Y

X

Next Page

Previous Page

Return

Branch Outlets

Branch Outlets

fig. 7042, Cont'd.

outlet Coupling

Nominal Pipe Size

Run

In./DN(mm) In./mm In./mm psi/bar Lbs./kN In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg

Female IPS Outlet- 7042F

3

80

4

Male IPS Outlet - 7042M

100

6

Grooved Outlet - 7042G

150

Pipe ends must be prepared in accordance with Gruvlok "Roll or
Cut Groove Specifications for Steel & Other IPS or ISO size Pipe".
Pressure & end load ratings are for use with standard wall steel pipe.

ANVIL PIPE FITTERS HANDBOOK 25

figuRe 7042 - outlet CouPling (Continued fRoM PRevious PAge).

Max.

Run End

Load

Range of
Pipe End

Separation

M/G

Working
Pressure

Outlet

FPTFMPT/Grv.

3

⁄4 — 500 4811 13⁄16-11⁄2 43⁄4 71⁄4 31⁄4 213⁄16 33⁄8 —1⁄2 x 3 7.9

Coupling Dimensions

X Y Z

FPTFMPTMGrv.

G

20 — 34.5 21.40 30-38 121 184 83 72 86 — 3.6

1 1 500 4811 13⁄16-11⁄2 43⁄4 71⁄4 31⁄4 23⁄4 33⁄8 41⁄2 x 3 7.9

25 25 34.5 21.40 30-38 121 184 83 70 86 102 3.6

— 11⁄2 500 4811 13⁄16-11⁄2 43⁄4 71⁄4 31⁄4 — — 41⁄2 x 3 8.6

— 40 34.5 21.40 30-38 121 184 83 — — 102 3.9

3

⁄4 — 500 7952 19⁄16-17⁄8 63⁄16 87⁄8 35⁄8 311⁄16 41⁄4 —5⁄8 x 31⁄2 9.9

20 — 34.5 35.37 40-48 157 225 92 94 108 — 4.5

1 — 500 7952 19⁄16-17⁄8 63⁄16 87⁄8 35⁄8 39⁄16 41⁄4 —5⁄8 x 31⁄2 9.9

25 — 34.5 35.37 40-48 157 225 92 91 108 — 4.5

— 11⁄2 500 7952 19⁄16-17⁄8 63⁄16 87⁄8 35⁄8 — — 47⁄85⁄8 x 31⁄2 11.0

— 40 34.5 35.37 40-48 157 225 92 — — 124 5.0

— 2 500 7952 19⁄16-17⁄8 63⁄16 87⁄8 35⁄8 — — 47⁄85⁄8 x 31⁄2 11.0

— 50 34.5 35.37 40-48 157 225 92 — — 124 5.0

1 — 500 17236 15⁄8-115⁄16 81⁄8 111⁄4 33⁄4 43⁄4 53⁄8 —5⁄8 x 31⁄2 18.0

25 — 34.5 76.66 41-51 206 286 95 121 137 — 8.2

11⁄2 11⁄2 500 17236 15⁄8-115⁄16 81⁄8 111⁄4 33⁄4 43⁄4 53⁄8 65⁄8 x 31⁄2 18.0

40 40 34.5 76.66 41-51 206 286 95 121 137 152 8.2

— 2 500 17236 15⁄8-115⁄16 81⁄8 111⁄4 33⁄4 — — 65⁄8 x 31⁄2 18.7

— 50 34.5 76.66 41-51 206 286 95 — — 152 8.5

For a one-time field test only, the maximum working pressure may
be increased 11⁄2 times the figure shown.
Not for use in copper systems.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Bolt
Size

Approx.

Wt.

Each

®

GRUVLOK

Branch Outlets

Z

V

T

Y

W

Y

V

W

U

Z

T

Next Page

Previous Page

Return

fig. 7045

Clamp-t, Fpt branCh

Bolt Size

Fig. 7045 (U-Bolt)

Specified Torque §

Min. Max.

Ft.-Lbs./N-M

Wt. Each

Fig. 7045

®

Nominal

Size

In./DN(mm) In./mm In./mm In./mm psi/bar In./mm In./mm In./mm In./mm In./mm In./mm In./mm

2 x 1⁄2 2.375 x 0.840 11⁄2 15⁄8 500 23⁄169⁄16 25⁄8

50 x 15 60.3 x 21.3 38 41 34.5 56 14 67 12 140 76 - 1.0

2 x 3⁄4 2.375 x 1.050 11⁄2 15⁄8 500 21⁄169⁄16 25⁄8 11⁄2 51⁄2 31⁄2 U-Bolt 30 40 2.3

50 x 20 60.3 x 26.7 38 41 34.5 52 14 67 38 140 76 - 1.0

2 x 1 2.375 x 1.315 11⁄2 15⁄8 500 115⁄169⁄16 25⁄8 11⁄2 51⁄2 31⁄2 U-Bolt 30 40 2.6

50 x 25 60.3 x 33.7 38 41 34.5 51 14 67 38 140 76 - 1.2

2 x 11⁄4 2.375 x 1.660 2 21⁄8 500 23⁄169⁄16 27⁄8 11⁄2 51⁄2 31⁄21⁄2 U-Bolt 30 40 2.7

50 x 32 60.3 x 42.4 51 54 34.5 55 14 73 38 140 89 - 1.2

GRUVLOK

2 x 11⁄2 2.375 x 1.900 2 21⁄8 500 23⁄169⁄16 27⁄8 11⁄2 7 31⁄21⁄2 U-Bolt 30 40 2.5

50 x 40 60.3 x 48.3 51 54 34.5 55 14 73 38 178 89 - 1.1

21⁄2 x 1⁄2 2.875 x 0.840 11⁄2 15⁄8 500 27⁄169⁄16 27⁄8 13⁄4 51⁄2 31⁄2 U-Bolt 30 40 3.0

65 x 15 73.0 x 21.3 38 41 34.5 62 14 73 44 140 76 - 1.4

21⁄2 x 3⁄4 2.875 x 1.050 11⁄2 15⁄8 500 25⁄169⁄16 27⁄8 13⁄4 51⁄2 31⁄2 U-Bolt 30 40 2.9

65 x 20 73.0 x 26.7 38 41 34.5 59 14 73 44 140 76 - 1.3

21⁄2 x 1 2.875 x 1.315 11⁄2 15⁄8 500 23⁄169⁄16 27⁄8 13⁄4 61⁄8 31⁄2 U-Bolt 30 40 2.9

26 www.anvilintl.com

65 x 25 73.0 x 33.7 38 41 34.5 55 14 73 44 156 76 - 1.3

21⁄2 x 11⁄4 2.875 x 1.660 2 21⁄8 500 27⁄169⁄16 31⁄8 13⁄4 61⁄8 33⁄81⁄2 U-Bolt 30 40 3.4

65 x 32 73.0 x 42.4 51 54 34.5 62 14 79 44 156 86 - 1.5

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

O.D.

Hole Dimensions

Min. Dia. Max. Dia. T U V Threaded W Y Z

figuRe 7045-fPt BRAnCh (Continued on next PAge)

Max. Working

Pressure



Clamp-T Dimensions

1

⁄2 51⁄2 31⁄2 U-Bolt 30 40 2.3

Approx.

Lbs./Kg

fig. 7045, Cont'd.

Next Page

Previous Page

Return

Clamp-t, Fpt branCh

Branch Outlets

Nominal

Size

In./DN(mm) In./mm In./mm In./mm psi/bar In./mm In./mm In./mm In./mm In./mm In./mm In./mm

21⁄2 x 11⁄2 2.875 x 1.900 2 21⁄8 500 27⁄169⁄16 31⁄8 13⁄4 61⁄8 33⁄81⁄2 U-Bolt 30 40 3.4

65 x 40 73.0 x 48.3 51 54 34.5 62 14 79 44 156 86 - 1.5

3 x 1⁄2 3.500 x 0.840 11⁄2 15⁄8 500 29⁄169⁄16 3 21⁄8 7 33⁄41⁄2 U-Bolt 30 40 2.8

80 x 15 88.9 x 21.3 38 41 34.5 65 14 76 54 178 95 - 1.2

3 x 3⁄4 3.500 x 1.050 11⁄2 15⁄8 500 27⁄169⁄16 3 21⁄8 7 33⁄41⁄2 U-Bolt 30 40 2.7

80 x 20 88.9 x 26.7 38 41 34.5 62 14 76 54 178 95 - 1.2

3 x 1 3.500 x 1.315 11⁄2 15⁄8 500 25⁄169⁄16 3 21⁄8 7 33⁄41⁄2 U-Bolt 30 40 2.7

80 x 25 88.9 x 33.7 38 41 34.5 59 14 76 54 178 95 - 1.2

3 x 11⁄4 3.500 x 1.660 2 21⁄8 500 211⁄16 11⁄2 33⁄8 21⁄8 67⁄8 33⁄41⁄2 x 23⁄4 80 100 3.4

80 x 32 88.9 x 42.4 51 54 34.5 68 38 86 54 175 95 - 1.5

3 x 11⁄2 3.500 x 1.900 2 21⁄8 500 211⁄16 11⁄2 33⁄8 21⁄8 67⁄8 33⁄41⁄2 x 23⁄4 80 100 4.4

80 x 40 88.9 x 48.3 51 54 34.5 68 38 86 54 175 95 - 2.0

3 x 2 3.500 x 2.375 21⁄2 25⁄8 500 211⁄16 11⁄2 33⁄8 21⁄8 67⁄8 41⁄81⁄2 x 23⁄4 80 100 4.6

80 x 50 88.9 x 60.3 64 67 34.5 68 38 86 54 175 105 - 2.1

4 x 1⁄2 4.500 x 0.840 11⁄2 15⁄8 500 31⁄169⁄16 31⁄2 25⁄8 73⁄4 33⁄41⁄2 U-Bolt 30 40 2.9

100 x 15 114.3 x 21.3 38 41 34.5 76 14 89 67 197 95 - 1.3

4 x 3⁄4 4.500 x 1.050 11⁄2 15⁄8 500 31⁄169⁄16 31⁄2 25⁄8 73⁄4 33⁄41⁄2 U-Bolt 30 40 2.8

100 x 20 114.3 x 26.7 38 41 34.5 78 14 89 67 197 95 - 1.3

4 x 1 4.500 x 1.315 11⁄2 15⁄8 500 213⁄169⁄16 31⁄2 25⁄8 73⁄4 33⁄41⁄2 U-Bolt 30 40 2.7

100 x 25 114.3 x 33.7 38 41 34.5 73 14 89 67 197 95 - 1.2

NOTE:

 Based on use with standard wall pipe.
Not for use in copper systems.

O.D.

21⁄2", 5" and 6" Nom. size run pipe may be used on 3" O.D., 51⁄2" O.D. and 61⁄2" O.D. pipe

Hole Dimensions

Min. Dia. Max. Dia. T U V Threaded W Y Z

ANVIL PIPE FITTERS HANDBOOK 27

figuRe 7045-fPt BRAnCh (Continued fRoM PRevious PAge)

Max. Working

Pressure



For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Clamp-T Dimensions

Bolt Size

Specified Torque §

Min. Max.

Ft.-Lbs./N-M

Approx.

Wt. Each

Lbs./Kg

®

GRUVLOK

Branch Outlets

Z

V

T

Y

W

Y

V

W

U

Z

T

Next Page

Previous Page

Return

fig. 7045, Cont'd.

Clamp-t, Fpt branCh

Fig. 7045

®

Nominal

Size

In./DN(mm) In./mm In./mm In./mm psi/bar In./mm In./mm In./mm In./mm In./mm In./mm In./mm

4 x 11⁄4 4.500 x 1.660 2 21⁄8 500 33⁄16 17⁄8 37⁄8 25⁄8 71⁄2 33⁄41⁄2 x 23⁄4 80 100 4.5

100 x 32 114.3 x 42.4 51 54 34.5 81 48 98 67 191 95 - 2.0

4 x 11⁄2 4.500 x 1.900 2 21⁄8 500 33⁄16 17⁄8 37⁄8 25⁄8 71⁄2 33⁄41⁄2 x 23⁄4 80 100 4.6

100 x 40 114.3 x 48.3 51 54 34.5 81 48 98 67 191 95 - 2.1

4 x 2 4.500 x 2.375 21⁄2 25⁄8 500 35⁄16 17⁄8 4 25⁄8 71⁄2 41⁄81⁄2 x 23⁄4 80 100 7.7

100 x 50 114.3 x 60.3 64 67 34.5 84 48 102 67 191 105 - 3.5

4 x 21⁄2 4.500 x 2.875 23⁄4 27⁄8 500 31⁄16 17⁄8 4 25⁄8 71⁄2 43⁄81⁄2 x 23⁄4 80 100 5.2

100 x 65 114.3 x 73.0 70 73 34.5 78 48 102 67 191 111 - 2.4

GRUVLOK

4 x 3 O.D. 4.500 x 2.996 23⁄4 27⁄8 500 3 17⁄8 4 25⁄8 71⁄2 43⁄81⁄2 x 23⁄4 80 100 5.2

114.3 x 76.1
4 x 3 4.500 x 3.500 31⁄2 35⁄8 500 31⁄4 17⁄8 41⁄4 25⁄8 71⁄2 51⁄41⁄2 x 31⁄2 80 100 6.5

100 x 80 114.3 x 88.9 89 92 34.5 83 48 108 67 191 133 - 2.9

5 x 11⁄4 5.563 x 1.660 2 21⁄8 500 311⁄16 17⁄8 43⁄8 31⁄4 91⁄8 33⁄45⁄8 x 31⁄4 100 130 5.4

125 x 32 141.3 x 42.4 51 54 34.5 94 48 111 83 232 95 - 2.4

5 x 11⁄2 5.563 x 1.900 2 21⁄8 500 311⁄16 17⁄8 43⁄8 31⁄4 91⁄8 33⁄45⁄8 x 31⁄4 100 130 5.5

125 x 40 141.3 x 48.3 51 54 34.5 94 48 111 83 232 95 - 2.5

28 www.anvilintl.com

5 x 2 5.563 x 2.375 21⁄2 25⁄8 500 313⁄16 17⁄8 41⁄2 31⁄4 91⁄8 41⁄85⁄8 x 31⁄4 100 130 5.7

125 x 50 141.3 x 60.3 64 67 34.5 97 48 114 83 232 105 - 2.6

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

O.D.

114.3 x 76.1 70 73 34.5 76 48 102 67 191 111 - 2.4

Hole Dimensions

Min. Dia. Max. Dia. T U V Threaded W Y Z

figuRe 7045-fPt BRAnCh (Continued on next PAge)

Max. Working

Pressure



Clamp-T Dimensions

Bolt Size

Fig. 7045 (U-Bolt)

Specified Torque §

Min. Max.

Ft.-Lbs./N-M

Wt. Each

Approx.

Lbs./Kg

fig. 7045, Cont'd.

Next Page

Previous Page

Return

Clamp-t, Fpt branCh

Branch Outlets

Nominal

Size

In./DN(mm) In./mm In./mm In./mm psi/bar In./mm In./mm In./mm In./mm In./mm In./mm In./mm

5 x 21⁄2 5.563 x 2.875 23⁄4 27⁄8 500 313⁄16 17⁄8 43⁄4 31⁄4 91⁄8 43⁄85⁄8 x 31⁄4 100 130 7.0

125 x 65 141.3 x 73.0 70 73 34.5 97 48 121 83 232 111 - 3.2

5 x 3 O.D. 5.563 x 2.996 23⁄4 27⁄8 500 33⁄4 17⁄8 43⁄4 31⁄4 91⁄8 43⁄83⁄4 x 41⁄2 130 180 7.0

141.3 x 76.1
5 x 3 5.563 x 3.500 31⁄2 35⁄8 500 4 17⁄8 5 31⁄4 91⁄8 51⁄45⁄8 x 31⁄4 100 130 8.7

125 x 80 141.3 x 88.9 89 92 34.5 102 48 127 83 232 133 - 3.9

6 x11⁄4 6.625 x 1.660 2 21⁄8 500 43⁄16 2 47⁄8 37⁄8 101⁄8 33⁄45⁄8 x 41⁄4 100 130 7.8

150 x 32 168.3 x 42.4 51 54 34.5 106 51 124 98 257 95 - 3.5

6 x 11⁄2 6.625 x 1.900 2 21⁄8 500 43⁄16 2 47⁄8 37⁄8 101⁄8 33⁄45⁄8 x 41⁄4 100 130 7.8

150 x 40 168.3 x 48.3 51 54 34.5 106 51 124 98 257 95 - 3.5

6 x 2 6.625 x 2.375 21⁄2 25⁄8 500 43⁄16 2 47⁄8 37⁄8 101⁄8 41⁄85⁄8 x 41⁄4 100 130 7.8

150 x 50 168.3 x 60.3 64 67 34.5 106 51 124 98 257 105 - 3.5

6 x 21⁄2 6.625 x 2.875 23⁄4 27⁄8 500 43⁄16 2 51⁄8 37⁄8 101⁄8 43⁄85⁄8 x 41⁄4 100 130 8.4

150 x 65 168.3 x 73.0 70 73 34.5 106 51 130 98 257 111 - 3.8

6 x 3 O.D. 6.625 x 2.996 23⁄4 27⁄8 500 41⁄8 2 51⁄8 37⁄8 101⁄8 43⁄85⁄8 x 41⁄4 100 130 8.4

168.3 x 76.1
6 x 3 6.625 x 3.500 31⁄2 35⁄8 500 43⁄8 2 53⁄8 37⁄8 101⁄8 51⁄45⁄8 x 41⁄4 100 130 9.6

150 x 80 168.3 x 88.9 89 92 34.5 111 51 137 98 257 133 - 4.4

6 x 4 6.625 x 4.500 41⁄2 45⁄8 500 43⁄8 2 51⁄2 37⁄8 101⁄8 61⁄25⁄8 x 41⁄4 100 130 10.5

150 x 100 168.3 x 114.3 114 117 34.5 111 51 140 98 257 165 - 4.8

NOTE:

 Based on use with standard wall pipe.
Not for use in copper systems.

O.D.

141.3 x 76.1 70 73 34.5 95 48 121 83 232 111 - 3.2

168.3 x 76.1 70 73 34.5 105 51 130 98 257 111 - 3.8

21⁄2", 5" and 6" Nom. size run pipe may be used on 3" O.D., 51⁄2" O.D. and 61⁄2" O.D. pipe

ANVIL PIPE FITTERS HANDBOOK 29

Hole Dimensions

Min. Dia. Max. Dia. T U V Threaded W Y Z

Max. Working

Pressure



For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Clamp-T Dimensions

Bolt Size

Specified Torque §

Min. Max.

Ft.-Lbs./N-M

Approx.

Wt. Each

Lbs./Kg

®

figuRe 7045-fPt BRAnCh (Continued fRoM PRevious PAge)

GRUVLOK

Branch Outlets

Z

V

T

Y

W

Y

V

W

U

Z

T

Next Page

Previous Page

Return

fig. 7045, Cont'd.

Clamp-t, Fpt branCh

Fig. 7045

Fig. 7045 (U-Bolt)

®

figuRe 7045-fPt BRAnCh (Continued fRoM PRevious PAge))

Nominal

Size

In./DN(mm) In./mm In./mm In./mm psi/bar In./mm In./mm In./mm In./mm In./mm In./mm In./mm

8 x 2 8.625 x 2.750 21⁄2 25⁄8 500 53⁄16 21⁄4 57⁄8 5 123⁄4 41⁄85⁄8 x 41⁄4 100 130 11.2

200 x 50 219.1 x 70.0 64 67 34.5 132 57 149 127 324 105 - 5.1

8 x 21⁄2 8.625 x 2.875 23⁄4 27⁄8 500 55⁄16 21⁄4 61⁄4 5 123⁄4 43⁄85⁄8 x 41⁄4 100 130 11.1

200 x 65 219.1 x 73.0 70 73 34.5 134 57 159 127 324 111 - 5.0

8 x 3 O.D. 8.625 x 2.996 23⁄4 27⁄8 500 51⁄4 21⁄4 61⁄4 5 123⁄4 43⁄85⁄8 x 41⁄4 100 130 11.1

219.1 x 76.1
8 x 3 8.625 x 3.500 31⁄2 35⁄8 500 53⁄8 21⁄4 63⁄8 5 123⁄4 51⁄45⁄8 x 41⁄4 100 130 13.0

200 x 80 219.1 x 88.9 89 92 34.5 137 57 162 127 324 133 - 5.9

GRUVLOK

8 x 4 8.625 x 4.500 41⁄2 45⁄8 500 53⁄8 21⁄4 61⁄2 5 123⁄4 61⁄25⁄8 x 41⁄4 100 130 16.2

200 x 100 219.1 x 114.3 114 117 34.5 137 57 165 127 324 165 - 7.3

NOTE:

 Based on use with standard wall pipe.
Not for use in copper systems.

§ – For additional Bolt Torque information, see page 202.
See Installation & Assembly directions on pages 172-173.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

30 www.anvilintl.com

O.D.

219.1 x 76.1 70 73 34.5 133 57 159 127 324 111 - 5.0

21⁄2", 5" and 6" Nom. size run pipe may be used on 3" O.D., 51⁄2" O.D. and 61⁄2" O.D. pipe

Hole Dimensions

Min. Dia. Max. Dia. T U V Threaded W Y Z

Max. Working

Pressure



Clamp-T Dimensions

Bolt Size

Specified Torque §

Min. Max.

Ft.-Lbs./N-M

Wt. Each

Approx.

Lbs./Kg

Z

V

T

Y

W

Z

V

T

Y

W

U

Next Page

Previous Page

Return

Branch Outlets

fig. 7046

Clamp-t, grooved branCh

Fig. 7046 (U-BOLT)Fig. 7046

figuRe 7046-gR BRAnCh (Continued on next PAge)

Nominal

Size

In./DN(mm) In./mm In./mm In./mm psi/bar In./mm In./mm In./mm In./mm In./mm In./mm

21⁄2 x 11⁄4• 2.875 x 1.660 2 21⁄8 500

65 x 32 73.0 x 42.4 51 54 34.5 14 79 44 156 89 - 1.5

21⁄2 x 11⁄2 2.875 x 1.900 2 21⁄8 500

65 x 40 73.0 x 48.3 51 54 34.5 14 79 44 156 89 - 1.5

3 x 11⁄4 3.500 x 1.660 2 21⁄8 500 11⁄2 31⁄2 21⁄8 67⁄8 33⁄41⁄2 x 23⁄4 80 100 3.4

80 x 32 88.9 x 42.4 51 54 34.5 38 89 54 175 95 - 1.5

3 x 11⁄2 3.500 x 1.900 2 21⁄8 500 11⁄2 31⁄2 21⁄8 67⁄8 33⁄41⁄2 x 23⁄4 80 100 4.4

80 x 40 88.9 x 48.3 51 54 34.5 38 89 54 175 95 - 2.0

3 x 2 3.500 x 2.375 21⁄2 25⁄8 500 11⁄2 31⁄2 21⁄8 67⁄8 41⁄81⁄2 x 23⁄4 80 100 4.6

80 x 50 88.9 x 60.3 64 67 34.5 38 89 54 175 105 - 2.1

4 x 11⁄4 4.500 x 1.660 2 21⁄8 500 17⁄8 4 25⁄8 71⁄2 33⁄41⁄2 x 23⁄4 80 100 4.2

100 x 32 114.3 x 42.4 51 54 34.5 48 102 67 191 95 - 1.9

4 x 11⁄2 4.500 x 1.900 2 21⁄8 500 17⁄8 4 25⁄8 71⁄2 33⁄41⁄2 x 23⁄4 80 100 4.3

100 x 40 114.3 x 48.3 51 54 34.5 48 102 67 191 95 - 2.0

4 x 2 4.500 x 2.375 21⁄2 25⁄8 500 17⁄8 4 25⁄8 71⁄2 41⁄81⁄2 x 23⁄4 80 100 4.6

100 x 50 114.3 x 60.3 64 67 34.5 48 102 67 191 105 - 2.1

ANVIL PIPE FITTERS HANDBOOK 31

O.D.

Hole Dimensions

Min.

Max.

Dia.

Dia.

Max. Working

Pressure



U V Grooved W Y Z

9

⁄16 31⁄8 13⁄4 61⁄8 31⁄21⁄2 U-Bolt 30 40 3.4

9

⁄16 31⁄8 13⁄4 61⁄8 31⁄21⁄2 U-Bolt 30 40 3.4

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Clamp-T Dimensions

Bolt Size

Specified Torque §

Min. Max.

Ft.-Lbs./N-M

Approx.

Wt. Each

®

Lbs./Kg

GRUVLOK

Branch Outlets

Z

V

T

Y

W

Z

V

T

Y

W

U

Next Page

Previous Page

Return

fig. 7046, Cont'd.

Clamp-t, grooved branCh

Fig. 7046 (U-BOLT)Fig. 7046

®

Nominal

Size

In./DN(mm) In./mm In./mm In./mm psi/bar In./mm In./mm In./mm In./mm In./mm In./mm

4 x 21⁄2 4.500 x 2.875 23⁄4 27⁄8 500 17⁄8 4 25⁄8 71⁄2 43⁄81⁄2 x 23⁄4 80 100 5.0

100 x 65 114.3 x 73.0 70 73 34.5 48 102 67 191 111 - 2.3

4 x 3 O.D. 4.500 x 2.996 23⁄4 27⁄8 500 17⁄8 4 25⁄8 71⁄2 43⁄81⁄2 x 23⁄4 80 100 5.0

114.3 x 76.1 114.3 x 76.1 70 73 34.5 48 102 67 191 111 - 2.3
4 x 3 4.500 x 3.500 31⁄2 35⁄8 500 17⁄8 4 25⁄8 71⁄2 51⁄41⁄2 x 31⁄2 80 100 5.6

100 x 80 114.3 x 88.9 89 92 34.5 48 102 67 191 133 - 2.5

GRUVLOK

5 x 11⁄4 5.563 x 1.660 2 21⁄8 500 17⁄8 41⁄4 31⁄4 91⁄8 33⁄41⁄2 x 23⁄4 80 100 5.6

125 x 32 141.3 x 42.4 51 54 34.5 48 108 83 232 95 - 2.5

5 x 11⁄2 5.563 x 1.900 2 21⁄8 500 17⁄8 41⁄4 31⁄4 91⁄8 33⁄45⁄8 x 31⁄4 100 130 5.6

125 x 40 141.3 x 48.3 51 54 34.5 48 108 83 232 95 - 2.5

5 x 2 5.563 x 2.375 21⁄2 25⁄8 500 17⁄8 41⁄4 31⁄4 91⁄8 41⁄85⁄8 x 31⁄4 100 130 5.5

125 x 50 141.3 x 60.3 64 67 34.5 48 108 83 232 105 - 2.5

5 x 21⁄2 5.563 x 2.875 23⁄4 27⁄8 500 17⁄8 41⁄4 31⁄4 91⁄8 43⁄85⁄8 x 31⁄4 100 130 5.8

125 x 65 141.3 x 73.0 70 73 34.5 48 108 83 232 111 - 2.6

32 www.anvilintl.com

5 x 3 5.563 x 3.500 31⁄2 35⁄8 500 17⁄8 45⁄8 31⁄4 91⁄8 51⁄45⁄8 x 31⁄4

125 x 80 141.3 x 88.9 89 92 34.5 48 117 83 232 133 - 3.2

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

O.D.

Hole Dimensions

Min.

Dia.

figuRe 7046-gR BRAnCh (Continued on next PAge)

Max.

Dia.

Max. Working

Pressure



U V Grooved W Y Z

Clamp-T Dimensions

Bolt Size

Specified Torque §

Min. Max.

Ft.-Lbs./N-M

100 130

Approx.

Wt. Each

Lbs./Kg

7.1

Next Page

Previous Page

Return

Branch Outlets

fig. 7046, Cont'd.

Clamp-t, grooved branCh

figuRe 7046-gR BRAnCh (Continued on next PAge)

Nominal

Size

In./DN(mm) In./mm In./mm In./mm psi/bar In./mm In./mm In./mm In./mm In./mm In./mm

6 x 11⁄2 6.625 x 1.900 2 21⁄8 500 2 5 37⁄8 101⁄8 33⁄45⁄8 x 41⁄4 100 130 7.2

150 x 40 168.3 x 48.3 51 54 34.5 51 127 98 257 95 * 3.3

6 x 2 6.625 x 2.375 21⁄2 25⁄8 500 2 5 37⁄8 101⁄8 41⁄85⁄8 x 41⁄4 100 130 7.8

150 x 50 168.3 x 60.3 64 67 34.5 51 127 98 257 105 * 3.5

6 x 21⁄2 6.625 x 2.875 23⁄4 27⁄8 500 2 51⁄8 37⁄8 101⁄8 43⁄85⁄8 x 41⁄4 100 130 7.6

150 x 65 168.3 x 73.0 70 73 34.5 51 130 98 257 111 * 3.4

6 x 3 O.D. 6.625 x 2.996 23⁄4 27⁄8 500 2 51⁄8 37⁄8 101⁄8 43⁄85⁄8 x 41⁄4 100 130 7.6

168.3 x 76.1
6 x 3 6.625 x 3.500 31⁄2 35⁄8 500 2 51⁄8 37⁄8 101⁄8 51⁄45⁄8 x 41⁄4 100 130 8.0

150 x 80 168.3 x 88.9 89 92 34.5 51 130 98 257 133 * 3.6

6 x 4 6.625 x 4.500 41⁄2 45⁄8 500 2 51⁄4 37⁄8 101⁄8 61⁄25⁄8 x 41⁄4 100 130 10.4

150 x 100 168.3 x 114.3 114 117 34.5 51 133 98 257 165 * 4.7

8 x 2 8.625 x 2.375 21⁄2 25⁄8 500 21⁄4 61⁄8 5 123⁄4 41⁄43⁄4 x 41⁄2 130 180 10.4

200 x 50 219.1 x 60.3 64 67 34.5 57 156 127 324 108 - 4.7

8 x 21⁄2 8.625 x 2.875 23⁄4 27⁄8 500 21⁄4 61⁄8 5 123⁄4 43⁄83⁄4 x 41⁄2 130 180 10.6

200 x 65 219.1 x 73.0 70 73 34.5 57 156 127 324 111 M20 x 110 175 245 4.8

8 x 3 8.625 x 3.500 31⁄2 35⁄8 500 21⁄4 61⁄8 5 123⁄4 51⁄43⁄4 x 41⁄2 130 180 11.5

200 x 80 219.1 x 88.9 89 92 34.5 57 156 127 324 133 M20 x 110 175 245 5.2

8 x 4 8.625 x 4.500 41⁄2 45⁄8 500 21⁄4 61⁄4 5 123⁄4 61⁄23⁄4 x 41⁄2 130 180 16.2

200 x 100 219.1 x 114.3 114 117 34.5 57 159 127 324 165 M20 x 110 175 245 7.3

NOTE: 21⁄2", 5" & 6" Nom. size run pipe may be used on 3" O.D., 51⁄2" O.D. & 61⁄2" O.D. pipe.

 Based on use with standard wall pipe.
Not for use in copper systems.

O.D.

168.3 x 76.1 70 73 34.5 51 130 98 257 111 * 3.4

ANVIL PIPE FITTERS HANDBOOK 33

Hole Dimensions

Min.

Max.

Dia.

Dia.

Max. Working

Pressure



U V Grooved W Y Z

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Clamp-T Dimensions

Bolt Size

• Cannot be used in cross configuration.

§ – For additional Bolt Torque information, see page 202.
See Installation & Assembly directions on pages 172-173.

Specified Torque §

Min. Max.

Ft.-Lbs./N-M

Approx.

Wt. Each

Lbs./Kg

®

GRUVLOK

Z

Y

V

V

T

Y

Z

V

V

V

V

Y Z

Branch Outlets

Next Page

Previous Page

Return

fig. 7047, fig. 7048 & fig. 7049

Clamp-t, CroSS

®

Fig. 7047 – Thread x Thread

The Gruvlok Clamp-T provides for a branch or cross con­nection in light wall or standard wall steel pipe.

The Fig. 7045 Clamp-T female pipe thread branch is

GRUVLOK

available with NPT or ISO 7/1 connection and the Fig.
7046 Clamp-T has grooved-end branch connection.

Clamp-T cross connections are available allowing greater
versatility in piping design.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

34 www.anvilintl.com

Fig. 7048 – Groove x Groove

NOTES:

21⁄2" x 11/4" Figure 7046 cannot be used in cross

configuration.

In addition, 2 x

made into crosses from the new design.

Fig. 7049 – Groove x Thread

1

⁄2" through 2 x 11⁄2" can now be

C

A

T

B

Next Page

Previous Page

Return

Branch Outlets

fig. 7044

branCh outlet

Nominal

Size

In./DN(mm) In./mm In./mm In./mm In./mm In./mm In./mm In./mm Ft.-Lbs./N-M Lbs./Kg

11⁄4 x 1⁄2 1.660 x 0.840 13⁄16 11⁄4 21⁄16 31⁄2 27⁄32 13⁄8 27 33 0.8

32 x 15 42.4 x 21.3 30 32 53 89 56 35 0.4

11⁄4 x 3⁄4 1.660 x 1.050 13⁄16 11⁄4 21⁄16 31⁄2 27⁄32 13⁄8 27 33 0.8

32 x 20 42.4 x 26.7 30 32 53 89 56 35 0.4

11⁄4 x 1 1.660 x 1.315 13⁄16 11⁄4 23⁄16 31⁄2 27⁄32 11⁄2 27 33 0.9

32 x 25 42.4 x 33.7 30 32 56 89 56 38 0.4

11⁄2 x 1⁄2 1.900 x 0.840 13⁄16 11⁄4 25⁄32 31⁄2 27⁄32 13⁄8 27 33 0.8

40 x 15 48.3 x 21.3 30 32 55 89 56 35 0.4

11⁄2 x 3⁄4 1.900 x 1.050 13⁄16 11⁄4 25⁄32 31⁄2 27⁄32 13⁄8 27 33 0.8

40 x 20 48.3 x 26.7 30 32 55 89 56 35 0.4

11⁄2 x 1 1.900 x 1.315 13⁄16 11⁄4 29⁄32 31⁄2 27⁄32 11⁄2 27 33 0.9

40 x 25 48.3 x 33.7 30 32 58 89 56 38 0.4

2 x 1⁄2 2.375 x 0.840 13⁄16 11⁄4 21⁄2 37⁄8 27⁄32 15⁄8 27 33 0.8

Maximum Working Pressure for all
sizes is 175 PSI (12.1 bar)

Not for use in copper systems.

§ – For additional Bolt Torque
information on page 202

For additional details see "Coupling
Data Chart notes" from page 264.
See Installation & Assembly direc-

tions on pages 174-175.

50 x 15 60.3 x 21.3 30 32 64 98 56 42 0.4

2 x 3⁄4 2.375 x 1.050 13⁄16 11⁄4 21⁄2 37⁄8 27⁄32 15⁄8 27 33 0.8

50 x 20 60.3 x 26.7 30 32 64 98 56 42 0.4

2 x 1 2.375 x 1.315 13⁄16 11⁄4 25⁄8 37⁄8 27⁄32 13⁄4 27 33 0.9

50 x 25 60.3 x 33.7 30 32 67 98 56 45 0.4

21⁄2 x 1⁄2 2.875 x 0.840 13⁄16 11⁄4 211⁄16 43⁄8 27⁄32 2 27 33 0.8

65 x 15 73.0 x 21.3 30 32 69 111 56 51 0.4

21⁄2 x 3⁄4 2.875 x 1.050 13⁄16 11⁄4 211⁄16 43⁄8 27⁄32 2 27 33 0.9

65 x 20 73.0 x 26.7 30 32 69 111 56 51 0.4

21⁄2 x 1 2.875 x 1.315 13⁄16 11⁄4 213⁄16 43⁄8 27⁄32 21⁄8 27 33 1.0

65 x 25 73.0 x 33.7 30 32 72 111 56 54 0.5

ANVIL PIPE FITTERS HANDBOOK 35

O.D.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

figuRe 7044 BRAnCh outlet

Hole Diameter Dimensions Specified Torque §

Min.
Dia.

Max.

Dia.

A B C

Take-out

T

Min. Max.

Approx.

Wt. Each

®

GRUVLOK

Grooved Fittings

C to E

O.D.

Next Page

Previous Page

Return

fig. 7050

90° elbow*

C - Cast malleable or ductile iron, all others are fabricated steel.
* 14"-24" Standard Radius 90° Elbows are 11⁄2.
Center to end dimensions and weights may differ from those shown

®

figuRe 7050 90° elBow*

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

1 1.315 21⁄4 C 0.6

25 33.4 57 0.3

11⁄4 1.660 23⁄4 C 1.0

32 42.2 70 0.5

11⁄2 1.900 23⁄4 C 1.2

40 48.3 70 0.5

2 2.375 31⁄4 C 1.7

GRUVLOK

50 60.3 83 0.8

21⁄2 2.875 33⁄4 C 2.6

65 73.0 95 1.2

3 O.D. 2.996 4 C 3.6

76.1 76.1 102 1.6
3 3.500 41⁄4 C 4.0

80 88.9 108 1.8

31⁄2 4.000 41⁄2 C 5.5

90 101.6 114 2.5

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

36 www.anvilintl.com

Center
to End

Approx.

Wt. Ea.

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

41⁄4 O.D. 4.250 43⁄4 C 7.7

108.0 108.0 121 3.5
4 4.500 5 C 7.7

100 114.3 127 3.5

51⁄4 O.D. 5.236 51⁄4 C 10.4

133.0 133.0 133 4.7

51⁄2 O.D. 5.500 51⁄4C 10.9

139.7 139.7 133 4.9
5 5.563 51⁄2 C 11.1

125 141.3 140 5.0

61⁄4 O.D. 6.259 6 C 15.2

159.0 159.0 152 6.9

61⁄2 O.D. 6.500 61⁄2 C 17.4

165.1 165.1 165 7.9
6 6.625 61⁄2 C 16.5

150 168.3 165 7.5

Center
to End

in chart, contact a Anvil Representative for more information.

Approx.

Wt. Ea.

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

8 8.625 73⁄4 C 30.6

200 219.1 197 13.9

10 10.750 9 C 53.5

250 273.1 229 24.3

12 12.750 10 C 82

300 323.9 254 37.2

14 14.000 21 169.0

350 355.6 533 76.7

16 16.000 24 222.0

400 406.4 610 100.7

18 18.000 27 280.0

450 457.2 686 127.0

20 20.000 30 344.0

500 508.0 762 156.0

24 24.000 36 490.0

600 609.6 914 222.3

Center
to End

Approx.

Wt. Ea.

C to E

O.D.

Next Page

Previous Page

Return

fig. 7051

45° elbow*

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

1 1.315 13⁄4 C 0.5

25 33.4 44 0.2

11⁄4 1.660 13⁄4 C 0.7

32 42.2 44 0.3

11⁄2 1.900 13⁄4 C 0.9

40 48.3 44 0.4

2 2.375 2 C 1.5

50 60.3 51 0.7

21⁄2 2.875 21⁄4 C 1.9

65 73.0 57 0.9

3 O.D. 2.996 21⁄2 C 2.2

76.1 76.1 64 1.0
3 3.500 21⁄2 C 3.3

80 88.9 64 1.5

31⁄2 4.000 23⁄4 C 4.3

90 101.6 70 2.0

Center

to End

Approx.

Wt. Ea.

C - Cast malleable or ductile iron, all others are fabricated steel.
* 14"-24" Standard Radius 45° Elbows are 11⁄2.
Center to end dimensions and weights may differ from those shown

in chart, contact a Anvil Representative for more information.

figuRe 7051 45° elBow*

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

41⁄4 O.D. 4.250 27⁄8 C 4.4

108.0 108.0 83 2.0
4 4.500 3 C 5.4

100 114.3 76 2.4

51⁄4 O.D. 5.236 31⁄4 C 7.3

133.0 133.0 83 3.3

51⁄2 O.D. 5.500 31⁄4 C 7.8

139.7 139.7 83 3.5
5 5.563 31⁄4 C 9.0

125 141.3 83 4.1

61⁄4 O.D. 6.259 31⁄2 C 10.1

159.0 159.0 89 4.6

61⁄2 O.D. 6.500 31⁄2 C 11.1

165.1 165.1 89 5.0
6 6.625 31⁄2 C 11.2

150 168.3 89 5.1

Center
to End

Approx.

Wt. Ea.

Grooved Fittings

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

8 8.625 41⁄4 C 19.8

200 219.1 108 9.0

10 10.750 43⁄4 C 34.3

250 273.1 121 15.6

12 12.750 51⁄4 C 50.0

300 323.9 133 22.7

14 14.000 83⁄4 92.0

350 355.6 222 41.7

16 16.000 10 117.0

400 406.4 254 53.1

18 18.000 111⁄4 146.0

450 457.2 286 66.2

20 20.000 121⁄2 179.0

500 508.0 317 81.2

24 24.000 15 255.0

600 609.6 381 115.7

Center

to End

Approx.

Wt. Ea.

®

GRUVLOK

ANVIL PIPE FITTERS HANDBOOK 37

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Grooved Fittings

C to E

O.D.

C to E

O.D.

Next Page

Previous Page

Return

fig. 7052

221⁄2° elbow

Cast

Fabricated

®

figuRe 7052 221⁄2° elBow

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

1 1.315 31⁄4 0.5

25 33.4 83 0.2

11⁄4 1.660 13⁄4 0.7

32 42.2 44 0.3

11⁄2 1.900 13⁄4 0.8

40 48.3 44 0.4

2 2.375 17⁄8 C 1.5

GRUVLOK

50 60.3 48 0.7

21⁄2 2.875 2 1.9

65 73.0 51 0.9

3 3.500 21⁄4 C 3.2

80 88.9 57 1.5

31⁄2 4.000 21⁄2 4.0

90 101.6 64 1.8

4 4.500 25⁄8 C 5.3

38 www.anvilintl.com

100 114.3 67 2.4

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Center
to End

Approx.

Wt. Ea.

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

5 5.563 27⁄8 7.2

125 141.3 73 3.3

6 6.625 31⁄8 C 8.2

150 168.3 79 3.7

8 8.625 37⁄8 C 17.8

200 219.1 98 8.1

10 10.750 43⁄8 30.0

250 273.1 111 13.6

12 12.750 47⁄8 40.4

300 323.9 124 18.3

14 14.000 5 46.0

350 355.6 127 20.9

16 16.000 5 52.2

400 406.4 127 23.7

18 18.000 51⁄2 65.0

450 457.2 140 29.5

Center
to End

Approx.

Wt. Ea.

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

20 20.000 6 80.0

500 508.0 152 36.3

24 24.000 7 112.0

600 609.6 178 50.8

C - Cast malleable or ductile iron, all others are

fabricated steel.

Center to end dimensions and weights may differ

from those shown in chart, contact a Anvil Repre­sentative for more information.

Center
to End

Approx.

Wt. Ea.

C to E

O.D.

Next Page

Previous Page

Return

Grooved Fittings

fig. 7053

111⁄4° elbow

figuRe 7053 111⁄4° elBow

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

1 1.315 13⁄8 0.3

25 33.4 35 0.1

11⁄4 1.660 13⁄8 0.5

32 42.2 35 0.2

11⁄2 1.900 13⁄8 0.7

40 48.3 35 0.3

2 2.375 13⁄8 0.9

50 60.3 35 0.4

21⁄2 2.875 11⁄2 1.5

65 73.0 38 0.7

3 3.500 11⁄2 2.0

80 88.9 38 0.9

31⁄2 4.000 13⁄4 2.8

90 101.6 44 1.3

4 4.500 13⁄4 3.3

100 114.3 44 1.5

Center

to End

ANVIL PIPE FITTERS HANDBOOK 39

Approx.

Wt. Ea.

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

5 5.563 2 5.0

125 141.3 51 2.3

6 6.625 2 6.5

150 168.3 51 2.9

8 8.625 2 10.0

200 219.1 51 4.5

10 10.750 21⁄8 14.5

250 273.1 54 6.6

12 12.750 21⁄4 18.7

300 323.9 57 8.5

14 14.000 31⁄2 32.1

350 355.6 89 14.6

16 16.000 4 42.0

400 406.4 102 19.1

18 18.000 41⁄2 53.2

450 457.2 114 24.1

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Center
to End

Approx.

Wt. Ea.

Nom. Size O.D.

In./DN(mm) In./mm In./mm Lbs./Kg

20 20.000 5 65.7

500 508.0 127 29.8

24 24.000 6 96.0

600 609.6 152 43.5

C - Cast malleable or ductile iron, all others are

fabricated steel.

Center to end dimensions and weights may differ

from those shown in chart, contact a Anvil Repre­sentative for more information.

Center

to End

Approx.

Wt. Ea.

®

GRUVLOK

Grooved Fittings

C to E

O.D.

Next Page

Previous Page

Return

fig. 7050 lR

90° long radiuS elbow*

®

figuRe 7050 lR 90° long RAdius elBow*

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

11⁄4 1.660 37⁄8 1.3

11⁄2 1.900 41⁄4 1.7

GRUVLOK

21⁄2 2.875 53⁄4 4.9

31⁄2 4.000 71⁄4 9.7

100 114.3 191 5.2

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

40 www.anvilintl.com

O.D.

1 1.315 31⁄2 0.9

25 33.4 89 0.4

32 42.2 98 0.6

40 48.3 108 0.8

2 2.375 43⁄8 C 2.5

50 60.3 136 1.1

65 73.0 146 2.2

3 3.500 57⁄8 C 6.5

80 88.9 181 2.9

90 101.6 184 4.4

4 4.500 71⁄2 C 11.5

Center
to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

125 141.3 241 9.5

150 168.3 273 13.2

200 219.1 381 26.9

250 273.1 457 47.2

300 323.9 533 66.7

350 355.6 533 76.7

400 406.4 610 100.7

450 457.2 686 127.0

O.D.

5 5.563 91⁄2 20.9

6 6.625 103⁄4 29.1

8 8.625 15 59.2

10 10.750 18 104.0

12 12.750 21 147.0

14 14.000 21 169.0

16 16.000 24 222.0

18 18.000 27 280.0

Center
to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

500 508.0 762 156.0

600 609.6 914 222.3

C - Cast malleable or ductile iron, all others are

fabricated steel.

* 14"-24" Standard Radius 90° Elbows are 11⁄2.

Center to end dimensions and weights may differ

from those shown in chart, Contact a Anvil Repre­sentative for more information.

O.D.

20 20.000 30 344.0

24 24.000 36 490.0

Center
to End

Approx.

Wt. Ea.

C to E

O.D.

Next Page

Previous Page

Return

fig. 7051lR

45° long radiuS elbow*

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

1 1.315 21⁄2 0.7

25 33.4 64 0.3

11⁄4 1.660 21⁄2 1.0

32 42.2 64 0.5

11⁄2 1.900 21⁄2 1.2

40 48.3 64 0.5

2 2.375 23⁄4 1.7

50 60.3 70 0.8

21⁄2 2.875 3 2.9

65 73.0 76 1.3

3 3.500 33⁄8 4.3

80 88.9 86 2.0

31⁄2 4.000 31⁄2 5.3

90 101.6 89 2.4

4 4.500 4 7.2

100 114.3 102 3.3

O.D.

Center

to End

Approx.

Wt. Ea.

fig. 7051lR 45° long RAdius elBow*

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

125 141.3 127 5.5

150 168.3 140 7.9

200 219.1 184 15.4

250 273.1 216 26.0

300 323.9 254 37.5

350 355.6 222 41.7

400 406.4 254 53.1

450 457.2 286 66.2

O.D.

5 5.563 5 12.2

6 6.625 51⁄2 17.4

8 8.625 71⁄4 34.0

10 10.750 81⁄2 57.4

12 12.750 10 82.6

14 14.000 21 169.0

16 16.000 10 117.0

18 18.000 111⁄4 146.0

Center
to End

Approx.

Wt. Ea.

Grooved Fittings

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

500 508.0 317 81.2

600 609.6 381 115.7

C - Cast malleable or ductile iron, all others are

fabricated steel.

* 14"-24" Standard Radius 45° Elbows are 11⁄2.

Center to end dimensions and weights may differ

from those shown in chart, Contact a Anvil Repre­sentative for more information.

O.D.

20 20.000 121⁄2 179.0

24 24.000 15 255.0

Center

to End

Approx.

Wt. Ea.

®

GRUVLOK

ANVIL PIPE FITTERS HANDBOOK 41

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Grooved Fittings

C to TE

C to GE

O.D.

Next Page

Previous Page

Return

fig. 7063

tee w/ threaded branCh

®

figuRe 7063 tee with thReAded BRAnCh

Nominal

Size

In./DN(mm) In./mm In./mm In./mm Lbs./Kg

1 1.315 21⁄4 21⁄4 0.9

25 33.4 57 57 0.4

11⁄4 1.660 23⁄4 23⁄4 1.4

32 42.2 70 70 0.6

11⁄2 1.900 23⁄4 23⁄4 1.7

GRUVLOK

40 48.3 70 70 0.8

2 2.375 31⁄4 41⁄4 2.9

50 60.3 83 108 1.3

21⁄2 2.875 33⁄4 33⁄4 4.7

65 73.0 95 95 2.1

3 3.500 41⁄4 6 8.1

80 88.9 108 152 3.7

42 www.anvilintl.com

31⁄2 4.000 41⁄2 41⁄2 8.8

90 101.6 114 114 4.0

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

O.D. C to GE C to TE

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm In./mm Lbs./Kg

4 4.500 5 71⁄4 13.5

100 114.3 127 184 6.1

5 5.563 51⁄2 51⁄2 16.7

125 140 140 7.6 7.6

6 6.625 61⁄2 61⁄2 25.6

150 168.3 165 165 11.6

8 8.625 73⁄4 73⁄4 45.0

200 219.1 197 197 20.4

10 10.750 9 9 73.0

250 273.1 229 229 33.1

12 12.750 10 10 98.0

300 323.9 254 254 44.5

C - Cast malleable or ductile iron, all others are fabricated steel.

O.D. C to GE C to TE

Approx.

Wt. Ea.

fig. 7061

C to E

C to E

O.D.

C to E

C to E

O.D.

Next Page

Previous Page

Return

reduCing tee Standard

Grooved Fittings

Cast

Fabricated

fig. 7061 ReduCing tee stAndARd (Continued on next PAge)

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

11⁄4 x 11⁄4 x 1 23⁄41.5

32 x 32 x 25 70 0.7

11⁄2 x 11⁄2 x 1 23⁄41.8

40 x 40 x 25 70 0.8

11⁄2 x 11⁄2 x 11⁄423⁄41.8

40 x 40 x 32 70 0.8

2 x 2 x 1 31⁄4 C 2.6

50 x 50 x 25 83 1.2

2 x 2 x 11⁄431⁄41.7

50 x 50 x 32 83 0.8

2 x 2 x 11⁄231⁄4 C 2.7

50 x 50 x 40 83 1.2

21⁄2 x 21⁄2 x 1 33⁄44.1

65 x 65 x 25 95 1.9

21⁄2 x 21⁄2 x 11⁄433⁄44.2

65 x 65 x 32 95 1.9

C - Cast malleable or ductile iron, all others are fabricated steel. See Fitting Size Chart on page 148 for O.D. sizes

ANVIL PIPE FITTERS HANDBOOK 43

Center
to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

21⁄2 x 21⁄2 x 11⁄2 33⁄4 4.3

65 x 65 x 40 95 2.0

21⁄2 x 21⁄2 x 2 33⁄4 4.4

65 x 65 x 50 95 2.0

3 x 3 x 1 41⁄4 C 7.0

80 x 80 x 25 108 3.2

3 x 3 x 11⁄4 41⁄4 5.8

80 x 80 x 32 108 2.6

3 x 3 x 11⁄2 41⁄4 5.9

80 x 80 x 40 108 2.7

3 x 3 x 2 41⁄4 C 5.5

80 x 80 x 50 108 2.5

3 x 3 x 21⁄2 41⁄4 6.3

80 x 80 x 65 108 2.9

4 x 4 x 1 33⁄4 7.0

100 x 100 x 25 95 3.2

Center

Approx.

to End

Wt. Ea.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

4 x 4 x 11⁄4 5 9.6

100 x 100 x 32 127 4.4

4 x 4 x 11⁄2 5 10.2

100 x 100 x 40 127 4.6

4 x 4 x 2 5 C 10.2

100 x 100 x 50 127 4.6

4 x 4 x 21⁄2 5 C 11.2

100 x 100 x 65 127 5.1

4 x 4 x 3 5 C 11.4

100 x 100 x 80 127 5.2

5 x 5 x 1 51⁄2 13.6

125 x 125 x 25 140 6.2

5 x 5 x 11⁄2 51⁄2 13.8

125 x 125 x 40 140 6.3

5 x 5 x 2 51⁄2 14

125 x 125 x 50 140 6.4

Center
to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

5 x 5 x 21⁄2 51⁄2 14.3

125 x 125 x 65 140 6.5

5 x 5 x 3 51⁄2 14.6

125 x 125 x 80 140 6.6

5 x 5 x 4 51⁄2 C 17.9

125 x 125 x 100 140 8.1

6 x 6 x 1 61⁄2 20.5

150 x 150 x 25 165 9.3

6 x 6 x 11⁄2 61⁄2 21.0

150 x 150 x 40 165 9.5

6 x 6 x 2 61⁄2 C 26.4

150 x 150 x 50 165 12.0

6 x 6 x 21⁄2 61⁄2 C 26.5

150 x 150 x 65 165 12.0

6 x 6 x 3 61⁄2 C 26.5

150 x 150 x 80 165 12.0

Center
to End

Approx.

Wt. Ea.

®

GRUVLOK

Grooved Fittings

C to E

C to E

O.D.

C to E

C to E

O.D.

Next Page

Previous Page

Return

fig. 7061, Cont'd.

reduCing tee Standard

Cast

Fabricated

®

fig. 7061 ReduCing tee stAndARd (Continued on next PAge)

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

6 x 6 x 4 61⁄2 C 26.5

150 x 150 x 100 165 12.0

6 x 6 x 5 61⁄2 C 28.0

150 x 150 x 125 165 12.7

8 x 8 x 11⁄2 73⁄4 33.0

200 x 200 x 40 197 15.0

8 x 8 x 2 73⁄4 32.7

GRUVLOK

200 x 200 x 50 197 14.8

8 x 8 x 21⁄2 73⁄4 33.0

200 x 200 x 65 197 15.0

8 x 8 x 3 73⁄4 33.5

200 x 200 x 80 197 15.2

8 x 8 x 4 73⁄4 C 50.0

200 x 200 x 100 197 22.7

8 x 8 x 5 73⁄4 34.7

200 x 200 x 125 197 15.7

8 x 8 x 6 73⁄4C 54.0

200 x 200 x 150 197 24.5

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

44 www.anvilintl.com

Center

to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

10 x 10 x 11⁄2 9 52.0

250 x 250 x 40 229 23.6

10 x 10 x 2 9 52.2

250 x 250 x 50 229 23.7

10 x 10 x 21⁄2 9 52.6

250 x 250 x 65 229 23.9

10 x 10 x 3 9 53.0

250 x 250 x 80 229 24.0

10 x 10 x 4 9 53.6

250 x 250 x 100 229 24.3

10 x 10 x 5 9 54.2

250 x 250 x 125 229 24.6

10 x 10 x 6 9 C 55.0

250 x 250 x 150 229 24.9

10 x 10 x 8 9 C 64.7

250 x 250 x 200 229 29.3

12 x 12 x 1 10 77.0

300 x 300 x 25 254 34.9

Center
to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

12 x 12 x 2 10 80.0

300 x 300 x 50 254 36.3

12 x 12 x 21⁄2 10 78.0

300 x 300 x 65 254 35.4

12 x 12 x 3 10 74.6

300 x 300 x 80 254 33.8

12 x 12 x 4 10 75.1

300 x 300 x 100 254 34.1

12 x 12 x 5 10 75.6

300 x 300 x 125 254 34.3

12 x 12 x 6 10 76.2

300 x 300 x 150 254 34.6

12 x 12 x 8 10 76.3

300 x 300 x 200 254 34.6

12 x 12 x 10 10 77.6

300 x 300 x 250 254 35.2

14 x 14 x 4 11 100.0

350 x 350 x 100

Center

Approx.

to End

Wt. Ea.

279 45.4

Center

Nominal Size

In./DN(mm) In./mm Lbs./Kg

14 x 14 x 6 11 101

350 x 350 x 150

14 x 14 x 8 11 103

350 x 350 x 200 279 46.7

14 x 14 x 10 11 104

350 x 350 x 250 279 47.2

14 x 14 x 12 11 105

350 x 350 x 300 279 47.6

16 x 16 x 4 12 126

400 x 400 x 100 305 57.2

16 x 16 x 6 12 127

400 x 400 x 150 305 57.6

16 x 16 x 8 12 128

400 x 400 x 200 305 58.1

16 x 16 x 10 12 129

400 x 400 x 250 305 58.5

16 x 16 x 12 12 130

400 x 400 x 300 305 59.0

Approx.

to End

Wt. Ea.

279 45.8

C to E

C to E

O.D.

C to E

C to E

O.D.

Next Page

Previous Page

Return

Grooved Fittings

fig. 7061, Cont'd.

reduCing tee Standard

fig. 7061 ReduCing tee stAndARd (Cont'd. fRoM PRevious PAge)

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

16 x 16 x 14 12 132

400 x 400 x 350 305 59.9

18 x 18 x 4 151⁄2 188

450 x 450 x 100 394 85.3

18 x 18 x 6 151⁄2 190

450 x 450 x 150 394 86.2

18 x 18 x 8 151⁄2 192

450 x 450 x 200 394 87.1

18 x 18 x 10 151⁄2 194

450 x 450 x 250 394 88.0

18 x 18 x 12 151⁄2 196

450 x 450 x 300 394 88.9

18 x 18 x 14 151⁄2 201

450 x 450 x 350 394 91.2

18 x 18 x 16 151⁄2 203

450 x 450 x 400 394 92.1

20 x 20 x 6 171⁄4 240

500 x 500 x 150 438 108.9

20 x 20 x 8 171⁄4 242

500 x 500 x 200 438 109.8

20 x 20 x 10 171⁄4 244

500 x 500 x 250 438 110.7

C - Cast malleable or ductile iron, all others are fabricated steel.

ANVIL PIPE FITTERS HANDBOOK 45

Center
to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

20 x 20 x 12 171⁄4 246

500 x 500 x 300 438 111.6

20 x 20 x 14 171⁄4 248

500 x 500 x 350 438 112.5

20 x 20 x 16 171⁄4 250

500 x 500 x 400 438 113.4

20 x 20 x 18 171⁄4 252

500 x 500 x 450 438 114.3

24 x 24 x 8 20 327

600 x 600 x 200 508 148.3

24 x 24 x 10 20 330

600 x 600 x 250 508 149.7

24 x 24 x 12 20 334

600 x 600 x 300 508 151.5

24 x 24 x 14 20 340

600 x 600 x 350 508 154.2

24 x 24 x 16 20 342

600 x 600 x 400 508 155.1

24 x 24 x 18 20 345

600 x 600 x 450

24 x 24 x 20 20 347

600 x 600 x 500

Center

Approx.

to End

Wt. Ea.

Cast

Fabricated

508 156.5

508 157.4

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

See Fitting Size Chart on page 148

for O.D. sizes

®

GRUVLOK

Grooved Fittings

C to E

C to E

O.D.

C to E

C to E

O.D.

Next Page

Previous Page

Return

fig. 7064

reduCing tee w/ threaded branCh

FabricatedCast

®

figuRe 7064 ReduCing tee w/thReAded BRAnCh (Continued on next PAge)

Nominal

In./DN(mm) In./mm Lbs/Kg

2 x 2 x

50 x 50 x 20 83 0.7

2 x 2 x 1 31⁄4 C 2.6

50 x 50 x 25 83 1.2

2 x 2 x 11⁄4 31⁄4 1.7

50 x 50 x 32 83 0.8

2 x 2 x 11⁄2 31⁄4 C 2.7

GRUVLOK

50 x 50 x 40 83 1.2

21⁄2 x 21⁄2 x 1 33⁄4 4.1

65 x 65 x 25 95 1.9

21⁄2 x 21⁄2 x 11⁄2 33⁄4 4.3

65 x 65 x 40 95 2

21⁄2 x 21⁄2 x 2 33⁄4 4.4

65 x 65 x 50 95 2

3 x 3 x 3⁄4 41⁄4 5.7

80 x 80 x 20 108 2.6

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

46 www.anvilintl.com

Size

3

⁄4 3

Center to

End

1

⁄4 1.6

Approx.

Wt. Ea.

Nominal

In./DN(mm) In./mm Lbs/Kg

3 x 3 x 1 41⁄4 C 7.0

80 x 80 x 25 108 3.2

3 x 3 x 11⁄2 41⁄4 5.3

80 x 80 x 40 108 2.4

3 x 3 x 2 41⁄4 5.5

80 x 80 x 50 108 2.5

3 x 3 x 21⁄2 41⁄4 5.8

80 x 80 x 65 108 2.6

4 x 4 x 3⁄4 33⁄4 7.2

100 x 100 x 20 95 3.3

4 x 4 x 1 33⁄4 7.0

100 x 100 x 25 95 3.2

4 x 4 x 11⁄2 5 9.2

100 x 100 x 40 127 4.2

4 x 4 x 2 5 10.2

100 x 100 x 50 127 4.6

Size

Center to

End

Approx.

Wt. Ea.

Nominal

In./DN(mm) In./mm Lbs/Kg

4 x 4 x 21⁄2 5 11.2

100 x 100 x 65 127 5.1

4 x 4 x 3 5 11.4

100 x 100 x 80 127 5.2

5 x 5 x 2 51⁄2 14.5

125 x 125 x 50 140 6.6

5 x 5 x 3 51⁄2 16.1

125 x 125 x 80 140 7.3

5 x 5 x 4 51⁄2 C 17.9

125 x 125 x 100 140 8.1

6 x 6 x 2 61⁄2 26.4

150 x 150 x 50 165 12

6 x 6 x 21⁄2 61⁄2 26.5

150 x 150 x 65 165 12

6 x 6 x 3 61⁄2 26.5

150 x 150 x 80 165 12

Size

Center to

End

Approx.

Wt. Ea.

Nominal

In./DN(mm) In./mm Lbs/Kg

6 x 6 x 4 61⁄2 26.5

150 x 150 x 100 165 12

6 x 6 x 5 61⁄2 C 28.0

150 x 150 x 125 165 12.7

8 x 8 x 2 73⁄4 37.5

200 x 200 x 50 197 17

8 x 8 x 3 73⁄4 38.7

200 x 200 x 80 197 17.6

8 x 8 x 4 73⁄4 50.0

200 x 200 x 100 197 22.7

8 x 8 x 5 73⁄4 41.0

200 x 200 x 125 197 18.6

8 x 8 x 6 73⁄4 54.0

200 x 200 x 150 197 24.5

10 x 10 x 2 9 61.8

250 x 250 x 50 229 28.0

Size

Center to

End

Approx.

Wt. Ea.

C to E

C to E

O.D.

C to E

C to E

O.D.

Next Page

Previous Page

Return

Grooved Fittings

fig. 7064, Cont'd.

reduCing tee w/ threaded branCh

FabricatedCast

figuRe 7064 ReduCing tee w/thReAded BRAnCh (Continued fRoM PRevious PAge)

Nominal

In./DN(mm) In./mm Lbs/Kg

10 x 10 x 3 9 63.0

250 x 250 x 80 229 28.6

10 x 10 x 4 9 64.0

250 x 250 x 100 229 29.0

10 x 10 x 5 9 65.1

250 x 250 x 125 229 29.5

10 x 10 x 6 9 55.0

250 x 250 x 150 229 24.9

10 x 10 x 8 9 64.7

250 x 250 x 200 229 29.3

12 x 12 x 3 10 84.9

300 x 300 x 80 254 38.5

12 x 12 x 4 10 85.8

300 x 300 x 100 254 38.9

12 x 12 x 5 10 87.0

300 x 300 x 125 254 39.5

ANVIL PIPE FITTERS HANDBOOK 47

Size

Center to

End

Approx.

Wt. Ea.

Nominal

In./DN(mm) In./mm Lbs/Kg

12 x 12 x 6 10 88.3

300 x 300 x 150 254 40.1

12 x 12 x 8 10 91.2

300 x 300 x 200 254 41.4

12 x 12 x 10 10 94.8

300 x 300 x 250 254 43.0

14 x 14 x 8 11 110.0

350 x 350 x 200 279 49.7

14 x 14 x 10 11 114.0

350 x 350 x 250 279 51.5

14 x 14 x 12 11 117.0

350 x 350 x 300 279 52.8

16 x 16 x 8 12 135.0

400 x 400 x 200 305 61.2

16 x 16 x 10 12 139.0

400 x 400 x 250 305 63.0

Center to

Size

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

End

Approx.

Wt. Ea.

Nominal

In./DN(mm) In./mm Lbs/Kg

16 x 16 x 12 12 142.0

400 x 400 x 300 305 64.4

18 x 18 x 10 151⁄2 204.0

450 x 450 x 250 394 92.5

18 x 18 x 12 151⁄2 209.0

450 x 450 x 300 394 94.8

18 x 18 x 14 151⁄2 211.0

450 x 450 x 350 394 95.7

18 x 18 x 16 151⁄2 216.0

450 x 450 x 400 394 98.0

24 x 24 x 8 20 334.0

600 x 600 x 200 508 152

24 x 24 x 10 20 342.0

600 x 600 x 250 508 155

24 x 24 x 12 20 349.0

600 x 600 x 300 508 158

Size

Center to

End

Approx.
Wt. Ea.

See Fitting Size Chart on page 148 for

O.D. sizes

C - Cast malleable or ductile iron, all

others are fabricated steel.

®

GRUVLOK

Grooved Fittings

C to E

O.D.

C to E

C to E

O.D.

Next Page

Previous Page

Return

fig. 7060

tee

FabricatedCast

®

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

1 1.315 21⁄4 C 0.9

25 33.4 57 0.4

11⁄4 1.660 23⁄4 C 1.5

32 42.2 70 0.7

11⁄2 1.900 23⁄4 C 1.8

40 48.3 70 0.8

2 2.375 31⁄4 C 2.4

GRUVLOK

50 60.3 83 1.1

21⁄2 2.875 33⁄4 C 4.0

65 73.0 95 1.8

3 O.D. 2.996 4 C 4.6

76.1 76.1 101 2.1
3 3.500 41⁄4 C 5.8

80 88.9 108 2.6

31⁄2 4.000 41⁄2 C 9.8

90 101.6 114 4.4

C - Cast malleable or ductile iron, all others are fabricated steel.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

48 www.anvilintl.com

O.D.

Center

to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

41⁄4 O.D. 4.250 43⁄4 C 9.3

108.0 108.0 121 4.2

100 114.3 127 4.7

51⁄4 O.D. 5.236 51⁄4 C 14.1

133.0 133.0 133 6.4

51⁄2 O.D. 5.500 51⁄2 C 16.1

139.7 139.7 140 7.3

125 141.3 140 7.3

61⁄4 O.D. 6.259 6 C 20.8

159.0 159.0 152 9.4

61⁄2 O.D. 6.500 61⁄2 C 24.4

165.1 165.1 165 11.1

150 168.3 165 11.7

fig. 7060 tee

O.D.

Center
to End

4 4.500 5 C 10.3

5 5.563 51⁄2 C 16.2

6 6.625 61⁄2 C 25.7

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

200 219.1 197 18.6

250 273.1 229 33.8

300 323.9 254 43.0

350 355.6 279 53.5

400 406.4 305 66.2

450 457.2 394 98.9

500 508.0 438 125

600 609.6 508 172

O.D.

8 8.625 73⁄4 C 41.1

10 10.750 9 C 74.5

12 12.750 10 C 94.7

14 14.000 11 118.0

16 16.000 12 146.0

18 18.000 151⁄2 218.0

20 20.000 171⁄4 275.0

24 24.000 20 379.0

Center
to End

Approx.

Wt. Ea.

E to E

O.D.

Next Page

Previous Page

Return

Grooved Fittings

fig. 7076

gr x thd ConCentriC reduCerS

®

fig. 7076 gR x thd ConCentRiC ReduCeRs

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

11⁄2 x 1 21⁄2 0.6

40 x 25 64 0.3

2 x 3⁄4 21⁄2 1.0

50 x 80 64 0.5

2 x 1 21⁄2 0.8

50 x 25 64 0.4

2 x 11⁄4 21⁄2 1.3

50 x 32 64 0.6

2 x 11⁄2 21⁄2 1.3

50 x 40 64 0.6

21⁄2 x 1 21⁄2 1.0

65 x 25 64 0.5

21⁄2 x 11⁄4 21⁄2 1.0

65 x 32 64 0.5

See Fitting Size Chart on page 148 for O.D. sizes

ANVIL PIPE FITTERS HANDBOOK 49

End to

End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

21⁄2 x 11⁄2 21⁄2 1.3

65 x 40 64 0.6

21⁄2 x 2 21⁄2 1.2

65 x 50 64 0.5

3 x 3⁄4 21⁄2 1.2

80 x 80 64 0.5

3 x 1 21⁄2 1.2

80 x 25 64 0.5

3 x 11⁄2 21⁄2 1.3

80 x 40 64 0.6

3 x 2 21⁄2 1.3

80 x 50 64 0.6

3 x 21⁄2 21⁄2 1.5

80 x 65 64 0.7

End to

Approx.

End

Wt. Ea.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

End to

End

Approx.
Wt. Ea.

31⁄2 x 3 3 1.8

90 x 80 76 0.8

4 x 1 3 2.2

100 x 25 76 1.0

4 x 11⁄2 3 2.3

100 x 40 76 1.0

4 x 2 3 2.3

100 x 50 76 1.0

4 x 21⁄2 3 2.3

100 x 65 76 1.0

4 x 3 3 2.6

100 x 80 76 1.2

4 x 31⁄2 3 2.5

100 x 90 76 1.1

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

5 x 4 31⁄2 4.5

125 x 100 89 2.0

6 x 1 4 6.0

150 x 25 102 2.7

6 x 2 4 6.0

150 x 50 102 2.7

6 x 3 4 6.0

150 x 80 102 2.7

6 x 4 4 5.9

150 x 100 102 2.7

6 x 5 4 5.8

150 x 125 102 2.6

All are Fabricated Steel.

End to

End

Approx.

Wt. Ea.

GRUVLOK

Grooved Fittings

E to E

O.D.

E to E

O.D.

Next Page

Previous Page

Return

fig. 7073 & fig. 7097

eCCentriC reduCerS

Fig. 7073– gr. x gr.

Fabricated Fabricated

Fig. 7097 – gr. x thd.

®

figuRe 7073 & 7097 eCCentRiC ReduCeRs (Continued on next PAge)

Nominal

In./DN(mm) In./mm Lbs./Kg

11⁄4 x 1 81⁄2 1.5

32 x 25 216 0.7

11⁄2 x 3⁄4 81⁄2 1.6

40 x 20 216 0.7

11⁄2 x 1 81⁄2 1.7

40 x 25 216 0.8

11⁄2 x 11⁄4 81⁄2 4.5

GRUVLOK

40 x 32 216 2.0

2 x 3⁄4 9 2.1

50 x 80 229 1.0

2 x 1 9 2.2

50 x 25 229 1.0

2 x 11⁄4 9 2.4

50 x 32 229 1.1

2 x 11⁄2 9 2.5

50 x 40 229 1.1

See Fitting Size Chart on page 148 for O.D. sizes

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

50 www.anvilintl.com

Size

End to

End

Approx.

Wt. Ea.

Nominal

In./DN(mm) In./mm Lbs./Kg

21⁄2 x 1 91⁄2 3.2

65 x 25 241 1.5

21⁄2 x 11⁄4 91⁄2 3.4

65 x 32 241 1.5

21⁄2 x 11⁄2 91⁄2 3.6

65 x 40 241 1.6

21⁄2 x 2 91⁄2 4.0

65 x 50 241 1.8

3 x 1 91⁄2 4.0

80 x 25 241 1.8

3 x 11⁄4 91⁄2 4.3

80 x 32 241 2.0

3 x 11⁄2 91⁄2 4.5

80 x 40 241 2.0

3 x 2 91⁄2 4.8

80 x 50 241 2.2

Size

End to

End

Approx.

Wt. Ea.

Nominal

In./DN(mm) In./mm Lbs./Kg

3 x 21⁄2 91⁄2 5.6

80 x 65 241 2.5

31⁄2 x 3 91⁄2 6.6

90 x 80 241 3.0

4 x 1 10 5.9

100 x 25 254 2.7

4 x 11⁄4 10 6.3

100 x 32 254 2.9

4 x 11⁄2 10 6.4

100 x 40 254 2.9

4 x 2 10 6.7

100 x 50 254 3.0

4 x 21⁄2 10 7.3

100 x 65 254 3.3

4 x 3 10 7.9

100 x 80 254 3.6

Size

End to

End

Approx.

Wt. Ea.

Nominal

In./DN(mm) In./mm Lbs./Kg

4 x 31⁄2 10 8.5

100 x 90 254 3.9

5 x 2 11 9.3

125 x 50 279 4.2

5 x 21⁄2 11 9.9

125 x 65 279 4.5

5 x 3 11 10.7

125 x 80 279 4.9

5 x 4 11 11.9

125 x 100 279 5.4

6 x 1 111⁄2 12.0

150 x 25 292 5.4

6 x 11⁄2 111⁄2 12.1

150 x 40 292 5.5

6 x 2 111⁄2 12.2

150 x 50 292 5.5

Size

End to

End

Approx.

Wt. Ea.

Next Page

Previous Page

Return

Grooved Fittings

fig. 7073 & fig. 7097, Cont'd.

eCCentriC reduCerS

figuRe 7073 & 7097 eCCentRiC ReduCeRs (Continued fRoM PRevious PAge)

Nominal

In./DN(mm) In./mm Lbs./Kg

6 x 21⁄2 111⁄2 12.8

150 x 65 292 5.8

6 x 3 111⁄2 13.6

150 x 80 292 6.2

6 x 4 111⁄2 14.9

150 x 100 292 6.8

6 x 5 111⁄2 16.2

150 x 125 292 7.3

8 x 3 12 17.9

200 x 80 305 8.1

8 x 4 12 19.7

200 x 100 305 8.9

8 x 5 12 21.4

200 x 125 305 9.7

8 x 6 12 23.2

200 x 150 305 10.5

10 x 4 13 29.7

250 x 100 330 13.5

10 x 5 13 31.7

250 x 125 330 14.4

Fabricated Steel *Figure 7097 is available in sizes 11⁄4 x 1 through 12 x 10.

Center to end dimensions may differ from those shown above. Contact a Anvil Representative for more information.

ANVIL PIPE FITTERS HANDBOOK 51

Size

End to

End

Approx.

Wt. Ea.

Nominal

In./DN(mm) In./mm Lbs./Kg

10 x 6 13 34.0

250 x 150 330 15.4

10 x 8 13 34.4

250 x 200 330 15.6

12 x 4 14 44.8

300 x 100 356 20.3

12 x 6 14 45.2

300 x 150 356 20.5

12 x 8 14 47.7

300 x 200 356 21.6

12 x 10 14 52.0

300 x 250 356 23.6

14 x 6 13 78

350 x 150 330 35.4

14 x 8 13 80

350 x 200 330 36.3

14 x 10 13 84

350 x 250 330 38.1

14 x 12 13 88

350 x 300 330 39.9

End to

Size

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

End

Approx.
Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

16 x 8 14 91

400 x 200 356 41.3

16 x 10 14 96

400 x 250 356 43.5

16 x 12 14 99

400 x 300 356 44.9

16 x 14 14 104

400 x 350 356 47.2

18 x 10 15 110

450 x 250 381 49.9

18 x 12 15 113

450 x 300 381 51.3

18 x 14 15 117

450 x 350 381 53.1

18 x 16 15 121

450 x 400 381 54.9

20 x 10 20 145

500 x 250 508 65.8

20 x 12 20 149

500 x 300 508 67.6

End to

End

Approx.
Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

20 x 14 20 152

500 x 350 508 68.9

20 x 16 20 156

500 x 400 508 70.8

20 x 18 20 160

500 x 450 508 72.6

24 x 10 20 174

600 x 250 508 78.9

24 x 12 20 179

600 x 300 508 81.2

24 x 14 20 184

600 x 350 508 83.5

24 x 16 20 189

600 x 400 508 85.7

24 x 18 20 194

600 x 450 508 88

24 x 20 20 199

600 x 500 508 90.3

See Fitting Size Chart on page 148 for

O.D. sizes

End to

End

Approx.

Wt. Ea.

®

GRUVLOK

Grooved Fittings

E to E

O.D.

E to E

O.D.

E to E

O.D.

Next Page

Previous Page

Return

fig. 7077, fig. 7078 & fig. 7079

Swaged nippleS

Approx.

Wt. Ea.

Fig. 7079

gr x bev

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

6 x 2

150 x 50

6 x 21⁄2

150 x 65

6 x 3

150 x 80

6 x 31⁄2

150 x 90

6 x 4

150 x 100

6 x 5

150 x 125

See Fitting Size Chart on page 148 for

O.D. sizes

End

to End

12 19.0

305 8.6

12 19.0

305 8.6

12 19.0

305 8.6

12 17.0

305 7.7

12 19.0

305 8.6

12 19.0

305 8.6

Fig. 7077

gr x gr

®

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

2 x 1 61⁄2 2.0

50 x 25 165 0.9

2 x 11⁄4 61⁄2 2.0

50 x 32 165 0.9

2 x 11⁄2 61⁄2 2.0

50 x 40 165 0.9

21⁄2 x 1 7 3.5

65 x 25 178 1.6

GRUVLOK

21⁄2 x 11⁄4 7 3.5

65 x 32 178 1.6

21⁄2 x 11⁄2 7 3.5

65 x 40 178 1.6

21⁄2 x 2 7 3.5

65 x 50 178 1.6

3 x 1 8 5.0

80 x 25 203 2.3

3 x 11⁄4 8 5.0

80 x 32 203 2.3

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

52 www.anvilintl.com

End

to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

3 x 11⁄2 8 5.0

80 x 40 203 2.3

3 x 2 8 5.0

80 x 50 203 2.3

3 x 21⁄2 8 5.0

80 x 65 203 2.3

31⁄2 x 3 8 7.0

90 x 80 203 3.2

4 x 1 9 8.0

100 x 25 229 3.6

4 x 11⁄4 9 8.0

100 x 32 229 3.6

4 x 11⁄2 9 8.0

100 x 40 229 3.6

4 x 2 9 8.0

100 x 50 229 3.6

4 x 21⁄2

100 x 65

Fig. 7078

gr x thd

figuRe 7077, 7078 & 7079 swAged niPPles

End

to End

9 8.0

229 3.6

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

4 x 3

100 x 80

4 x 31⁄2

100 x 90

5 x 2

125 x 50

5 x 21⁄2

125 x 65

5 x 3

125 x 80

5 x 4

125 x 100

6 x 1

150 x 25

6 x 11⁄4

150 x 32

6 x 11⁄2

150 x 40

End

to End

9 8.0

229 3.6

9 8.0

229 3.6

11 12.0

279 5.4

11 12.0

279 5.4

11 12.0

279 5.4

11 12.0

279 5.4

12 19.0

305 8.6

12 19.0

305 8.6

12 19.0

305 8.6

Approx.

Wt. Ea.

fig. 7072

E to E

O.D.

E to E

O.D.

Next Page

Previous Page

Return

gr x gr ConCentriC reduCerS

Grooved Fittings

Cast

Fabricated

®

figuRe 7072 ConCentRiC ReduCeR (Continued on next PAge)

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

11⁄4 x 1 21⁄2 0.6

32 x 25 64 0.3

11⁄2 x 1 21⁄2 0.6

40 x 25 64 0.3

11⁄2 x 11⁄4 21⁄2 0.6

40 x 32 64 0.3

2 x 1 21⁄2 0.8

50 x 25 64 0.4

2 x 11⁄4 21⁄2 C 1.3

50 x 32 64 0.6

2 x 11⁄2 21⁄2 C 1.3

50 x 40 64 0.6

21⁄2 x 1 21⁄2 1.0

65 x 25 64 0.5

21⁄2 x 11⁄4 21⁄2 1.0

65 x 32 64 0.5

21⁄2 x 11⁄2 21⁄2 1.3

65 x 40 64 0.6

End

to End

Approx.

Wt. Ea.

ANVIL PIPE FITTERS HANDBOOK 53

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

21⁄2 x 2 21⁄2 C 1.6

65 x 50 64 0.7

3 x 1 21⁄2 1.2

80 x 25 64 0.5

3 x 11⁄4 21⁄2 1.3

80 x 32 64 0.6

3 x 11⁄2 21⁄2 1.3

80 x 40 64 0.6

3 x 2 21⁄2 C 1.4

80 x 50 64 0.6

3 x 21⁄2 21⁄2 C 1.5

80 x 65 64 0.7

31⁄2 x 3 3 1.8

90 x 80 76 0.8

4 x 1 3 C 2.2

100 x 25 76 1.0

4 x 11⁄4 3 2.2

100 x 32 76 1.0

End

Approx.

to End

Wt. Ea.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

4 x 11⁄2 3 2.3

100 x 40 76 1.0

4 x 2 3 C 2.4

100 x 50 76 1.1

4 x 21⁄2 3 C 2.6

100 x 65 76 1.2

4 x 3 3 C 3.2

100 x 80 76 1.5

4 x 31⁄2 3 C 3.6

100 x 90 76 1.6

5 x 2 31⁄2 4.6

125 x 50 89 2.1

5 x 21⁄2 31⁄2 4.5

125 x 65 89 2.0

5 x 3 31⁄2 4.4

125 x 80 89 2.0

5 x 4 31⁄2 C 4.5

125 x 100 89 2.0

End

to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

6 x 1 4 6.8

150 x 25 102 3.1

6 x 11⁄2 4 6.9

150 x 40 102 3.1

6 x 2 4 C 6.0

150 x 50 102 2.7

6 x 21⁄2 4 6.0

150 x 65 102 2.7

6 x 3 4 C 5.4

150 x 80 102 2.4

6 x 4 4 C 5.6

150 x 100 102 2.5

6 x 5 4 C 6.0

150 x 125 102 2.7

8 x 3 5 12.0

200 x 80 127 5.5

8 x 4 5 C 9.0

200 x 100 127 4.1

End

to End

Approx.

Wt. Ea.

GRUVLOK

Grooved Fittings

E to E

O.D.

E to E

O.D.

Next Page

Previous Page

Return

fig. 7072, Cont'd.

gr x gr ConCentriC reduCerS

FabricatedCast

®

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

8 x 5 5 11.5

200 x 125 127 5.2

8 x 6 5 C 10.6

200 x 150 127 4.8

10 x 4 6 20

250 x 100 152 9.1

10 x 5 6 20

250 x 125 152 9.1

GRUVLOK

10 x 6 6 C 20

250 x 150 152 9.1

10 x 8 6 23.9

250 x 200 152 10.8

12 x 4 7 25

300 x 100 178 11.3

12 x 6 7 29

300 x 150 178 13.2

12 x 8 7 29

54 www.anvilintl.com

300 x 200 178 13.2

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

End

to End

Approx.

Wt. Ea.

figuRe 7072 ConCentRiC ReduCeR (Continued fRoM PRevious PAge)

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

12 x 10 7 32.4

300 x 250 178 14.7

14 x 6 13 54.3

350 x 150 330 24.6

14 x 8 13 54.5

350 x 200 330 24.7

14 x 10 13 55.7

350 x 250 330 25.3

14 x 12 13 57.3

350 x 300 330 26.0

16 x 8 14 65.4

400 x 200 356 29.7

16 x 10 14 66.7

400 x 250 356 30.3

16 x 12 14 68.1

400 x 300 356 30.9

16 x 14 14 71.0

400 x 350 356 32.2

End

to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

18 x 10 15 82.3

450 x 250 381 37.3

18 x 12 15 83.6

450 x 300 381 37.9

18 x 14 15 86.2

450 x 350 381 39.1

18 x 16 15 87.2

450 x 400 381 39.6

20 x 10 20 123.0

500 x 250 508 55.8

20 x 12 20 125.0

500 x 300 508 56.7

20 x 14 20 129.0

500 x 350 508 58.5

20 x 16 20 131.0

500 x 400 508 59.4

20 x 18 20 133.0

500 x 450 508 60.3

End

to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm Lbs./Kg

24 x 10 20 147.0

600 x 250 508 66.7

24 x 12 20 149.0

600 x 300 508 67.6

24 x 14 20 152.0

600 x 350 508 68.9

24 x 16 20 153.0

600 x 400 508 69.4

24 x 18 20 154.0

600 x 450 508 69.9

24 x 20 20 155.0

600 x 500 508 70.3

See Fitting Size Chart on page 148 for

O.D. sizes

End

to End

Approx.

Wt. Ea.

C to LE

C to LE

C to SE

O.D.

Next Page

Previous Page

Return

Grooved Fittings

fig. 7069

45° lateral

figuRe 7069 45° lAteRAls

Center

Nominal

ANVIL PIPE FITTERS HANDBOOK 55

O.D.

Size

In./

In./mm In./mm In./mm Lbs./Kg

DN(mm)

1 1.315 5 21⁄4 1.5

25 33.4 127 57 0.7

11⁄4 1.660 53⁄4 21⁄2 2.5

32 42.2 146 64 1.1

11⁄2 1.900 61⁄4 23⁄4 3.5

40 48.3 159 70 1.6

2 2.375 7 23⁄4 4.5

50 60.3 178 70 2.0

21⁄2 2.875 73⁄4 3 10.0

65 73.0 197 76 4.5

3 3.500 81⁄2 31⁄4 11.0

80 88.9 216 83 5.0

31⁄2 4.000 10 31⁄2 14.0

90 101.6 254 89 6.4

to Long

End

Center

to Short

End

Approx.

Wt. Ea.

Nominal

Size

In./

DN(mm)

4 4.500 101⁄2 33⁄4 18.3

100 114.3 267 95 8.3

5 5.563 121⁄2 4 30.0

125 141.3 318 102 13.6

6 6.625 14 41⁄2 46.6

150 168.3 356 114 21.1

8 8.625 18 6 82.8

200 219.1 457 152 37.6

10 10.750 201⁄2 61⁄2 127

250 273.1 521 165 57.4

12 12.750 23 7 165

300 323.9 584 178 74.8

14 14.000 261⁄2 71⁄2 215

350 355.6 673 191 97.5

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Center

Center

O.D.

to Long

End

In./mm In./mm In./mm Lbs./Kg

to Short

End

Approx.
Wt. Ea.

Center

Nominal

O.D.

Size

In./

In./mm In./mm In./mm Lbs./Kg

DN(mm)

16 16.000 29 8 345

400 406.4 737 203 157

18 18.000 32 81⁄2 425

450 457.2 813 216 193

20 20.000 35 9 517

500 508.0 889 229 235

24 24.000 40 10 940

600 609.6 1016 254 426

to Long

End

Center

to Short

End

Approx.

Wt. Ea.

®

GRUVLOK

Grooved Fittings

C to LE

C to LE

C to SE

O.D.

Next Page

Previous Page

Return

fig. 7070

45° reduCing lateral

®

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

3 x 3 x 2 81⁄2 31⁄4 9.8

80 x 80 x 50 216 83 4.4

3 x 3 x 21⁄2 81⁄2 31⁄4 11.5

80 x 80 x 65 216 83 5.2

4 x 4 x 2 101⁄2 33⁄4 15.5

100 x 100 x 50 267 95 7.0

4 x 4 x 21⁄2 101⁄2 33⁄4 17.0

100 x 100 x 65 267 95 7.7

GRUVLOK

4 x 4 x 3 101⁄2 33⁄4 18.5

100 x 100 x 80 267 95 8.4

5 x 5 x 2 121⁄2 4 22.5

125 x 125 x 50 318 102 10.2

5 x 5 x 3 121⁄2 4 26.5

125 x 125 x 80 318 102 12.0

5 x 5 x 4 121⁄2 4 30.5

125 x 125 x 100 318 102 13.8

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

56 www.anvilintl.com

Center to
Long End

Center to

Short End

Approx.
Wt. Ea.

figuRe 7070 45° ReduCing lAteRAl

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

6 x 6 x 2 14 41⁄2 33.0

150 x 150 x 50 356 114 15.0

6 x 6 x 3 14 41⁄2 37.0

150 x 150 x 80 356 114 16.8

6 x 6 x 4 14 41⁄2 40.0

150 x 150 x 100 356 114 18.1

6 x 6 x 5 14 41⁄2 45.0

150 x 150 x 125 356 114 20.4

8 x 8 x 4 18 6 59.6

200 x 200 x 100 457 152 27.0

8 x 8 x 5 18 6 68.0

200 x 200 x 125 457 152 30.8

8 x 8 x 6 18 6 75.0

200 x 200 x 150 457 152 34.0

10 x 10 x 4 201⁄2 61⁄2 83.0

250 x 250 x 100 521 165 37.6

Center to
Long End

Center to
Short End

Approx.
Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

10 x 10 x 5 201⁄2 61⁄2 100.0

250 x 250 x 125 521 165 45.4

10 x 10 x 6 201⁄2 61⁄2 105.0

250 x 250 x 150 521 165 47.6

10 x 10 x 8 201⁄2 61⁄2 116.0

250 x 250 x 200 521 165 52.6

12 x 12 x 4 23 7 137.0

300 x 300 x 100 584 178 62.1

12 x 12 x 6 23 7 140.0

300 x 300 x 150 584 178 63.5

12 x 12 x 8 23 7 147.0

300 x 300 x 200 584 178 66.7

12 x 12 x 10 23 7 168

300 x 300 x 250 584 178 76.2

14 x 14 x 4 261⁄2 71⁄2 173

350 x 350 x 100 673 191 78.5

Center to
Long End

Center to
Short End

Approx.

Wt. Ea.

C to LE

C to LE

C to SE

O.D.

Next Page

Previous Page

Return

Grooved Fittings

fig. 7070, Cont'd.

45° reduCing lateral

figuRe 7070 45° ReduCing lAteRAl

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

14 x 14 x 6 261⁄2 71⁄2 185

350 x 350 x 150 673 191 83.9

14 x 14 x 8 261⁄2 71⁄2 195

350 x 350 x 200 673 191 88.5

14 x 14 x 10 261⁄2 71⁄2 223

350 x 350 x 250 673 191 101

14 x 14 x 12 261⁄2 71⁄2 240

350 x 350 x 300 673 191 109

16 x 16 x 6 29 8 235

400 x 400 x 150 737 203 107

16 x 16 x 8 29 8 250

400 x 400 x 200 737 203 113

16 x 16 x 10 29 8 263

400 x 400 x 250 737 203 119

16 x 16 x 12 29 8 283

400 x 400 x 300 737 203 128

16 x 16 x 14 29 8 307

400 x 400 x 350 737 203 139

18 x 18 x 6 32 81⁄2 275

450 x 450 x 150 813 216 125

ANVIL PIPE FITTERS HANDBOOK 57

Center to
Long End

Center to
Short End

Approx.

Wt. Ea.

Nominal

In./DN(mm) In./mm In./mm Lbs./Kg

18 x 18 x 8 32 81⁄2 306

450 x 450 x 200 813 216 139

18 x 18 x 10 32 81⁄2 321

450 x 450 x 250 813 216 146

18 x 18 x 12 32 81⁄2 333

450 x 450 x 300 813 216 151

18 x 18 x 14 32 81⁄2 358

450 x 450 x 350 813 216 162

18 x 18 x 16 32 81⁄2 382

450 x 450 x 400 813 216 173

20 x 20 x 12 35 9 390

500 x 500 x 300 889 229 177

20 x 20 x 14 35 9 410

500 x 500 x 350 889 229 186

20 x 20 x 16 235 9 440

500 x 500 x 400 889 229 200

24 x 24 x 16 40 10 725

600 x 600 x 400 1016 254 329

24 x 24 x 20 40 10 785

600 x 600 x 500 1016 254 356

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Size

Center to

Long End

Center to

Short End

Approx.

Wt. Ea.

See Fitting Size Chart on page 148 for

O.D. sizes

®

GRUVLOK

Grooved Fittings

E

1

H

G

E

2

O.D.

Next Page

Previous Page

Return

fig. 7066

tee wye

®

figuRe 7066 tee wye (Continued on next PAge)

Nominal

Size

In./DN(mm) In./mm In./mm In./mm In./mm Lbs./Kg

2 x 2 x 2 23⁄4 7 9 45⁄8 6.4

50 x 50 x 50 70 178 229 117 2.9

21⁄2 x 21⁄2 x 21⁄2 3 73⁄4 101⁄2 53⁄4 11.5

65 x 65 x 65 76 197 267 146 5.2

3 x 3 x 3 31⁄4 81⁄2 111⁄2 61⁄2 16.5

80 x 80 x 80 83 216 292 165 7.5

31⁄2 x 31⁄2 x 31⁄2 31⁄2 10 13 73⁄4 22

GRUVLOK

90 x 90 x 90 89 254 330 197 10.0

4 x 4 x 3 33⁄4 101⁄2 127⁄8 77⁄8 23

100 x 100 x 80 95 267 327 200 10.4

4 x 4 x 4 33⁄4 101⁄2 135⁄8 81⁄8 26

100 x 100 x 100 95 267 346 206 11.8

5 x 5 x 3 4 121⁄2 141⁄4 91⁄4 32

125 x 125 x 80 102 318 362 235 14.5

5 x 5 x 4 4 121⁄2 151⁄8 95⁄8 35

58 www.anvilintl.com

125 x 125 x 100 102 318 384 244 15.9

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

G H E1 E2

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm In./mm In./mm Lbs./Kg

5 x 5 x 5 4 121⁄2 161⁄8 10 40

125 x 125 x 125 102 318 410 254 18.1

6 x 6 x 3 41⁄2 14 155⁄16 105⁄16 50

150 x 150 x 80 114 356 389 262 22.7

6 x 6 x 4 41⁄2 14 161⁄4 103⁄4 55

150 x 150 x 100 114 356 413 273 24.9

6 x 6 x 5 41⁄2 14 171⁄4 111⁄8 58

150 x 150 x 125 114 356 438 283 26.3

6 x 6 x 6 41⁄2 14 181⁄4 111⁄2 60.5

150 x 150 x 150 114 356 464 292 27.4

8 x 8 x 3 6 18 183⁄16 133⁄16 100

200 x 200 x 80 152 457 462 338 45.4

8 x 8 x 4 6 18 19 131⁄2 110

200 x 200 x 100 152 457 483 343 49.9

8 x 8 x 5 6 18 20 137⁄8 111

200 x 200 x 125 152 457 508 352 50.3

G H E1 E2

Approx.

Wt. Ea.

E

1

H

G

E

2

O.D.

Next Page

Previous Page

Return

Grooved Fittings

fig. 7066, Cont'd.

tee wye

®

figuRe 7066 tee wye (Continued fRoM PRevious PAge)

Nominal

Size

In./DN(mm) In./mm In./mm In./mm In./mm Lbs./Kg

8 x 8 x 6 6 18 211⁄8 143⁄8 112

200 x 200 x 150 152 457 537 365 50.8

8 x 8 x 8 6 18 231⁄4 151⁄4 120

200 x 200 x 200 152 457 591 387 54.4

10 x 10 x 3 61⁄2 201⁄2 197⁄8 147⁄8 130

250 x 250 x 80 165 521 505 378 59.0

10 x 10 x 4 61⁄2 201⁄2 203⁄4 151⁄4 135

250 x 250 x 100 165 521 527 387 61.2

10 x 10 x 5 61⁄2 201⁄2 217⁄8 153⁄4 140

250 x 250 x 125 165 521 556 400 63.5

10 x 10 x 6 61⁄2 201⁄2 227⁄8 161⁄8 145

250 x 250 x 150 165 521 581 410 65.8

10 x 10 x 8 61⁄2 201⁄2 271⁄4 191⁄4 150

250 x 250 x 200 165 521 692 489 68.0

10 x 10 x 10 61⁄2 201⁄2 271⁄4 18 190

250 x 250 x 250 165 521 692 457 86.2

ANVIL PIPE FITTERS HANDBOOK 59

G H E1 E2

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm In./mm In./mm Lbs./Kg

12 x 12 x 3 7 23 203⁄4 153⁄4 140

300 x 300 x 80 178 584 527 400 63.5

12 x 12 x 4 7 23 211⁄2 16 145

300 x 300 x 100 178 584 546 406 65.8

12 x 12 x 6 7 23 233⁄4 17 165

300 x 300 x 150 178 584 603 432 74.8

12 x 12 x 8 7 23 26 18 175

300 x 300 x 200 178 584 660 457 79.4

12 x 12 x 10 7 23 28 183⁄4 200

300 x 300 x 250 178 584 711 476 90.7

12 x 12 x 12 7 23 31 201⁄2 240

300 x 300 x 300 178 584 787 521 109

See Fitting Size Chart on page 148 for O.D. sizes

G H E1 E2

Approx.

Wt. Ea.

GRUVLOK

Grooved Fittings

E

1

H

G

E

2

O.D.

Next Page

Previous Page

Return

fig. 7067

reduCingtee wye

®

figuRe 7067 ReduCing tee wye

Nominal

Size

In./DN(mm) In./mm In./mm In./mm In./mm Lbs./Kg

G H E1 E2

4 x 3 x 3 15⁄8 73⁄8 103⁄4 55⁄8 16.0

100 x 80 x 80 41 187 273 143 7.3

4 x 3 x 4 33⁄4 101⁄2 135⁄8 81⁄8 27.0

100 x 80 x 100 95 267 346 206 12.2

5 x 3 x 3 11⁄4 93⁄4 111⁄2 61⁄2 25.0

125 x 80 x 80 32 248 292 165 11.3

GRUVLOK

5 x 3 x 5 4 121⁄2 161⁄8 10 44.0

125 x 80 x 125 102 318 410 254 20.0

5 x 4 x 3 17⁄8 91⁄8 117⁄8 67⁄8 21.0

125 x 100 x 80 48 232 302 175 9.5

5 x 4 x 4 17⁄8 91⁄8 123⁄4 71⁄4 25.0

125 x 100 x 100 48 232 324 184 11.3

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

60 www.anvilintl.com

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm In./mm In./mm Lbs./Kg

G H E1 E2

6 x 4 x 6 41⁄2 14 181⁄4 111⁄2 61.0

150 x 100 x 150 114 356 464 292 27.7

6 x 5 x 3 11⁄4 103⁄4 13 8 27.0

150 x 125 x 80 32 273 330 203 12.2

6 x 5 x 4 11⁄4 103⁄4 137⁄8 83⁄8 31.0

150 x 125 x 100 32 273 352 213 14.1

8 x 6 x 4 1 12 143⁄4 91⁄4 45.0

200 x 150 x 100 25 305 375 235 20.4

8 x 6 x 8 6 18 231⁄4 151⁄4 95.0

200 x 150 x 200 152 457 591 387 43.1

See Fitting Size Chart on page 148 for O.D. sizes

Approx.

Wt. Ea.

C to LE

C to SE

O.D.

Next Page

Previous Page

Return

fig. 7071

true wye

Center

Nominal

O.D.

Size

In./

In./mm In./mm In./mm Lbs./Kg

DN(mm)

1 1.315 21⁄4 21⁄4 1.1

25 33.4 57 57 0.5

11⁄4 1.660 23⁄4 21⁄2 1.5

32 42.2 70 64 0.7

11⁄2 1.900 23⁄4 23⁄4 1.8

40 48.3 70 70 0.8

2 2.375 31⁄4 23⁄4 2.3

50 60.3 83 70 1.0

21⁄2 2.875 33⁄4 3 5.0

65 73.0 95 76 2.3

3 3.500 41⁄4 31⁄4 6.1

80 88.9 108 83 2.8

to Long

End

Center

to Short

End

Approx.

Wt. Ea.

figuRe 7071 tRue wye

Center

Nominal

O.D.

Size

In./

In./mm In./mm In./mm Lbs./Kg

DN(mm)

31⁄2 4.000 41⁄2 31⁄2 8.3

90 101.6 114 89 3.8

4 4.500 5 33⁄4 10.5

100 114.3 127 95 4.8

5 5.563 51⁄2 4 15

125 141.3 140 102 6.8

6 6.625 61⁄2 41⁄2 21.6

150 168.3 165 114 9.8

8 8.625 73⁄4 6 36.0

200 219.1 197 152 16.3

10 10.750 9 61⁄2 51.0

250 273.1 229 165 23.1

to Long

End

Center

to Short

End

Approx.

Wt. Ea.

Grooved Fittings

Center

Nominal

O.D.

Size

In./

In./mm In./mm In./mm Lbs./Kg

DN(mm)

12 12.750 10 7 160.0

300 323.9 254 178 72.6

14 14.000 11 71⁄2 136.0

350 355.6 279 191 61.7

16 16.000 12 8 166.0

400 406.4 305 203 75.3

18 18.000 151⁄2 81⁄2 234

450 457.2 394 216 106

20 20.000 171⁄4 9 281

500 508.0 438 229 128

24 24.000 20 10 523

600 609.6 508 254 237

to Long

End

Center

to Short

End

Approx.
Wt. Ea.

®

GRUVLOK

ANVIL PIPE FITTERS HANDBOOK 61

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Grooved Fittings

C to TE

C to GE

O.D.

C to GE

C to TE

O.D.

Next Page

Previous Page

Return

fig. 7055 gR x MPt

90° adapter elbow

®

Nominal

Size

In./DN(mm) In./mm In./mm In./mm Lbs./Kg

1 1.315 21⁄4 21⁄4 0.6

25 33.4 57 57 0.3

11⁄4 1.660 23⁄4 23⁄4 1.0

32 42.2 70 70 0.5

11⁄2 1.900 23⁄4 23⁄4 1.2

40 48.3 70 70 0.5

2 2.375 31⁄4 41⁄4 2.3

50 60.3 83 108 1.0

GRUVLOK

21⁄2 2.875 33⁄4 33⁄4 3.7

65 73.0 95 95 1.7

3 3.500 41⁄4 6 6.5

80 88.9 108 152 2.9

31⁄2 4.000 41⁄2 61⁄4 8.2

90 101.6 114 159 3.7

4 4.500 5 71⁄4 11

100 114.3 127 184 5.0

62 www.anvilintl.com

6 6.625 61⁄2 61⁄2 19.8

150 168.3 165 165 9.0

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

figuRe 7055 90° AdAPteR elBows

O.D.

Center to

Grooved End

Center to

Threaded End

Approx.
Wt. Ea.

fig. 7056 gR x MPt

45° adapter elbow

Nominal

Size

In./DN(mm) In./mm In./mm In./mm Lbs./Kg

1 1.315 13⁄4 13⁄4 0.6

25 33.4 44 44 0.3

11⁄4 1.660 13⁄4 13⁄4 0.7

32 42.2 44 44 0.3

11⁄2 1.900 13⁄4 13⁄4 0.8

40 48.3 44 44 0.4

2 2.375 2 3 1.6

50 60.3 51 76 0.7

21⁄2 2.875 21⁄4 21⁄4 2.2

65 73.0 57 57 1.0

3 3.500 21⁄2 41⁄4 4.3

80 88.9 64 108 2.0

31⁄2 4.000 23⁄4 23⁄4 4.2

90 101.6 70 70 1.9

4 4.500 3 51⁄4 7.5

100 114.3 76 133 3.4

6 6.625 31⁄2 31⁄2 11.1

150 168.3 89 89 5.0

figuRe 7056 45° AdAPteR elBows

O.D.

Center to

Grooved End

Center to

Threaded End

Approx.

Wt. Ea.

Grooved Fittings

E to E

O.D.

C to E

E to E

H

B Dia.

O.D.

Next Page

Previous Page

Return

fig. 7087 gR x fPt

Female thread adapter

fig. 7050Rf

grooved x 150# Flanged (gxF)

figuRe 7050 Rf ReduCing BAse suPPoRt elBows

figuRe 7087 feMAle thReAd AdAPteR

Nominal

In./DN(mm) In./mm In./mm Lbs./Kg

ANVIL PIPE FITTERS HANDBOOK 63

Grooved

Size

End O.D.

1 1.315 21⁄16 0.7

25 33.4 52 0.3

11⁄4 1.660 25⁄16 1.4

32 42.2 59 0.6

11⁄2 1.900 25⁄16 1.5

40 48.3 59 0.7

2 2.375 21⁄2 1.6

50 60.3 64 0.7

3 3.500 23⁄4 2.5

80 88.9 70 1.1

4 4.500 31⁄4 4.5

100 114.3 83 2.0

End

to End

Approx.

Wt. Ea.

Nominal Size

In./DN(mm) In./mm In./mm In./mm NPSC Lbs./Kg

6 x 4 6.625 12 21⁄2 11⁄2 38.5

150 x 100 168.3 305 64 38 17.5

6 x 5 6.625 121⁄2 21⁄2 11⁄2 45.4

150 x 125 168.3 318 64 38 20.6

8 x 5 8.625 16 3 11⁄2 65.5

200 x 125 219.1 406 76 38 29.7

8 x 6 8.625 16 3 11⁄2 73

200 x 150 219.1 406 76 38 33.1

10 x 6 10.750 19 31⁄2 11⁄2 100

250 x 150 273.1 483 89 38 45.4

10 x 8 10.750 19 31⁄2 11⁄2 127

250 x 200 273.1 483 89 38 57.6

12 x 8 12.750 22 4 11⁄2 155

300 x 200 323.9 559 102 38 70.3

12 x 10 12.750 22 4 11⁄2 186

300 x 250 323.9 559 102 38 84.4

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Grooved End

O.D.

Center to End H B Dia. Threaded

Approx. Wt. Ea.

GxF

®

GRUVLOK

Grooved Fittings

E to E

O.D.

E to E

O.D.

Next Page

Previous Page

Return

fig. 7084

groove x ClaSS 150
Flange nippleS

* Contact a Anvil Representative for

dimensions & weights.

®

GRUVLOK

64 www.anvilintl.com

figuRe 7084 gRoove x ClAss 150 flAnge niPPles

Nominal

Size

In./

DN(mm)

1 1.315 3 2.5

25 33.4 76 1.1

11⁄4 1.660 4 3.8

32 42.2 102 1.7

11⁄2 1.900 4 4.1

40 48.3 102 1.9

2 2.375 4 6.0

50 60.3 102 2.7

21⁄2 2.875 4 9.2

65 73.0 102 4.2

3 3.500 4 10.4

80 88.9 102 4.7

31⁄2 4.000 4 14.0

90 101.6 102 6.4

4 4.500 6 19.1

100 114.3 152 8.7

5 5.563 6 23.0

125 141.3 152 10.4

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

End

to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nominal

Size

In./

DN(mm)

6 6.625 6 29.5

150 168.3 152 13.4

8 8.625 6 43.5

200 219.1 152 19.7

10 10.750 8 68.2

250 273.1 203 30.9

12 12.750 8 96.1

300 323.9 203 43.6

14 14.000 * *

350 355.6 * *

16 16.000 * *

400 406.4 * *

18 18.000 * *

450 457.2 * *

20 20.000 * *

500 508.0 * *

24 24.000 * *

600 609.6 * *

End

O.D.

to End

In./mm In./mm Lbs./Kg

Approx.
Wt. Ea.

fig. 7085

groove x ClaSS 300
Flange nippleS

figuRe 7085 gRoove x ClAss 300 flAnge niPPles

Nominal

Size

In./

DN(mm)

1 1.315 3 3.6

25 33.4 76 1.6

11⁄4 1.660 4 4.6

32 42.2 102 2.1

11⁄2 1.900 4 7.1

40 48.3 102 3.2

2 2.375 4 8.2

50 60.3 102 3.7

21⁄2 2.875 4 11.9

65 73.0 102 5.4

3 3.500 4 15.5

80 88.9 102 7.0

31⁄2 4.000 4 21.0

90 101.6 102 9.5

4 4.500 6 28.0

100 114.3 152 12.7

5 5.563 6 35.0

125 141.3 152 15.9

End

to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nominal

Size

In./

DN(mm)

6 6.625 6 35.0

150 168.3 152 15.9

8 8.625 6 50.0

200 219.1 152 22.7

10 10.750 6 72.0

250 273.1 152 32.7

12 12.750 8 *

300 323.9 203 *

14 14.000 8 *

350 355.6 203 *

16 16.000 * *

400 406.4 * *

18 18.000 * *

450 457.2 * *

20 20.000 * *

500 508.0 * *

24 24.000 * *

600 609.6 * *

End

to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

E to E

O.D.

fig. 7074

Next Page

Previous Page

Return

Cap

Grooved Fittings

figuRe 7074 CAP

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

11⁄4 C 1.660 11⁄4 0.4

11⁄2 C 1.900 11⁄4 0.5

2 C 2.375 1 0.5

21⁄2 C 2.875 1 0.7

3 O.D. C 2.996 1 0.8

76.1 76.1 25 0.4
3 C 3.500 1 1.1

31⁄2 C 4.000 1 1.4

41⁄4 O.D. C 4.250 11⁄8 2.0

108.0 108.0 29 0.9

O.D.

1 1.315 11⁄4 0.3

25 33.4 32 0.1

32 42.2 32 0.2

40 48.3 32 0.2

50 60.3 25 0.2

65 73.0 25 0.3

80 88.9 25 0.5

90 101.6 25 0.6

ANVIL PIPE FITTERS HANDBOOK 65

End

to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

4 C 4.500 11⁄8 2.8

100 114.3 29 1.3

51⁄4 O.D. C 5.236 11⁄8 3.2

133.0 133.0 29 1.5

51⁄2 O.D. C 5.500 11⁄8 4.0

139.7 139.7 29 1.8
5 C 5.563 11⁄8 4.0

125 141.3 29 1.8

61⁄4 O.D. C 6.259 11⁄8 5.1

159.0 159.0 29 2.3

61⁄2 O.D. C 6.500 11⁄8 6.0

165.1 165.1 29 2.7
6 C 6.625 15⁄16 6.0

150 168.3 33 2.7

8 C 8.625 11⁄2 12.5

200 219.1 38 5.7

10 C 10.750 11⁄2 21.9

250 273.1 38 9.9

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

O.D.

End

to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

12 C 12.750 11⁄2 33.8

300 323.9 38 15.3

14* 14.000 81⁄2 40

350 355.6 216 18.1

16* 16.000 9 45

400 406.4 229 20.4

18* 18.000 10 58

450 457.2 254 26.3

20* 20.000 11 79

500 508.0 279 35.8

24* 24.000 121⁄2 100

600 609.6 318 45.4

* Machined Cap
C - Cast Malleable or Ductile Iron

O.D.

End

to End

Approx.

Wt. Ea.

®

GRUVLOK

Grooved FittingsGrooved Fittings

E to E

O.D.

C to E

O.D.

Next Page

Previous Page

Return

fig. 7075

bull plug

®

figuRe 7075 Bull Plug

Nominal

In./DN(mm) In./mm In./mm Lbs./Kg

GRUVLOK

* Contact a Anvil Representative for dimensions &

weights.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

66 www.anvilintl.com

Size

Fitting

O.D.

End

to End

Approx.

Wt. Ea.

2 2.375 4 2.5

50 60.3 102 1.1

21⁄2 2.875 5 3.1

65 73.0 127 1.4

3 3.500 6 4.4

80 88.9 152 2.0

4 4.500 7 7.4

100 114.3 178 3.4

5 5.563 * *

125 141.3 * *

6 6.625 10 18.5

150 168.3 254 8.4

fig. 7068

CroSS

figuRe 7068 CRoss

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

11⁄4 1.660 23⁄4 2.1

11⁄2 1.900 23⁄4 2.5

21⁄2 2.875 33⁄4 5.2

31⁄2 4.000 41⁄2 9.8

100 114.3 127 5.5

125 141.3 140 8.0

O.D.

1 1.315 21⁄4 1.3

25 33.4 57 0.6

32 42.2 70 1.0

40 48.3 70 1.1

2 2.375 31⁄4 2.9

50 60.3 83 1.3

65 73.0 95 2.4

3 3.500 41⁄4 7.5

80 88.9 108 3.4

90 101.6 114 4.4

4 4.500 5 12.2

5 5.563 51⁄2 17.6

Center

to End

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

150 168.3 165 12.8

200 219.1 197 21.8

250 273.1 229 31.8

300 323.9 254 49.9

350 355.6 279 63.5

400 406.4 305 77.1

450 457.2 394 118

500 508.0 438 145

600 609.6 508 265

O.D.

6 6.625 61⁄2 28.3

8 8.625 73⁄4 48.0

10 10.750 9 70.0

12 12.750 10 110

14 14.000 11 140

16 16.000 12 170

18 18.000 151⁄2 260

20 20.000 171⁄4 320

24 24.000 20 585

Center
to End

Approx.

Wt. Ea.

Grooved Fittings

E to E

O.D.

E to E

O.D.

E to E

O.D.

E to E

O.D.

Next Page

Previous Page

Return

fig. 7086

gr x hoSe nippleS

fig. 7080

gr x gr

fig. 7081

gr x mpt

fig. 7082

gr x bev

®

figuRe 7086 hose niPPles

Nom.

Size

In./

DN(mm)

1 1.315 31⁄4 0.4

25 33.4 83 0.2

11⁄4 1.660 35⁄8 0.7

32 42.2 92 0.3

11⁄2 1.900 4 0.8

40 48.3 102 0.4

2 2.375 45⁄8 1.3

50 60.3 117 0.6

21⁄2 2.875 51⁄2 2.1

65 73.0 140 1.0

3 3.500 6 3.3

80 88.9 152 1.5

ANVIL PIPE FITTERS HANDBOOK 67

End to

End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

4 4.500 71⁄4 5.5

100 114.3 184 2.5

5 5.563 93⁄4 8.1

125 141.3 248 3.7

6 6.625 11 13.2

150 168.3 279 6.0

8 8.625 121⁄2 24.0

200 219.1 318 10.9

10 10.750 14 29.0

250 273.1 356 13.2

12 12.750 16 46.0

300 323.9 406 20.9

End to

End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

figuRes 7080, 7081 & 7082 AdAPteR niPPles

Nom.

Size

In./

DN(mm)

1 1.315 3 0.4

25 33.4 76 0.2

11⁄4 1.660 4 0.8

32 42.2 102 0.4

11⁄2 1.900 4 0.9

40 48.3 102 0.4

2 2.375 4 1.2

50 60.3 102 0.5

21⁄2 2.875 4 1.9

65 73.0 102 0.9

3 3.500 4 2.5

80 88.9 102 1.1

31⁄2 4.000 4 3.1

90 101.6 102 1.4

End to

End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

DN(mm)

This product is not UL/ULC Listed or FM

Nom.

Size

In./

4 4.500 6 5.5

100 114.3 152 2.5

5 5.563 6 7.4

125 141.3 152 3.4

6 6.625 6 9.5

150 168.3 152 4.3

8 8.625 6 14.2

200 219.1 152 6.4

10 10.750 8 27.0

250 273.1 203 12.2

12 12.750 8 33.0

300 323.9 203 15.0

Approved.

End to

End

Approx.
Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

GRUVLOK

Grooved Fittings

C to EOB

C to EOR

O.D.

C to EOR

C to EOB

O.D.

Next Page

Previous Page

Return

fig. 7065

Standpipe tee (gr x gr x Fpt)

fig. 7062

bullhead tee SpeCialty teeS (gr x gr x Fpt)

®

figuRe 7065 stAndPiPe tee (gR x gR x fPt)

Nominal Size O.D.

In./DN(mm) In./mm In./mm In./mm Lbs./Kg

Center to

End of Run

4 x 4 x 21⁄2 4.500 31⁄4 4 7.6

100 x 100 x 65 114.3 83 102 3.4

GRUVLOK

6 x 6 x 21⁄2 6.625 31⁄4 51⁄8 11.2

150 x 150 x 65 168.3 83 130 5.1

See Fitting Size Chart on page 148 for O.D. sizes.
These fittings are designed to provide minimal pressure drop and uniform

strength. Pressure ratings of Gruvlok Fittings conforms to those of Fig. 7001

68 www.anvilintl.com

Gruvlok Standard Coupling.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Center

to End of

Branch

Approx. Wt.

Ea.

See Fitting Size Chart on page 148 for O.D. sizes
These fittings are designed to provide minimal pressure drop and uniform

figuRe 7065 stAndPiPe tee (gR x gR x fPt)

Nominal Size O.D.

In./DN(mm) In./mm In./mm In./mm Lbs./Kg

Center to

End of Run

5 x 5 x 8 73⁄4 51⁄2 31.0 7.6

125 x 125 x 200 197 140 14.1 3.4

6 x 6 x 8 73⁄4 61⁄2 37.6 11.2

150 x 150 x 200 197 165 17.1 5.1

strength. Pressure ratings of Gruvlok Fittings conforms to those of Fig.
7001 Gruvlok Standard Coupling.

Center

to End of

Branch

Approx. Wt.

Ea.

fig. 7050dR

H

C to E

O.D.

Next Page

Previous Page

Return

Standpipe tee (gr x gr x Fpt)

Grooved Fittings

®

figuRe 7050dR 90° dRAin elBow

Nominal

Size

In./DN(mm) In./mm psi/bar In./mm In./mm Lbs./Kg

O.D.

Max
Working
Pressure

11⁄4 1.660 300 23⁄4 13⁄4 0.70

32 42.2 20.7 69 44 0.30

11⁄2 1.900 300 23⁄4 13⁄4 1.70

40 48.3 20.7 69 44 0.8

2 2.375 300 31⁄4 13⁄4 2.00

50 60.3 20.7 83 44 0.90

21⁄2 2.875 300 33⁄4 17⁄8 2.50

65 73.0 20.7 95 48 1.10

3 3.500 300 41⁄4 2 3.20

80 88.9 20.7 108 51 1.50

4 4.500 300 5 21⁄4 4.60

100 114.3 20.7 127 57 2.10

ANVIL PIPE FITTERS HANDBOOK 69

Dimensions

C to E H

Approx.

Wt. Ea.

Nominal

Size

In./DN(mm) In./mm psi/bar In./mm In./mm Lbs./Kg

O.D.

5 5.583 300 51⁄2 23⁄8 11.5

125 141.3 20.7 140 60 5.2

6 6.625 300 61⁄2 23⁄8 9.60

150 168.3 20.7 165 60 4.40

8 8.625 300 73⁄4 21⁄2 15.8

200 219.1 20.7 197 64 7.20

10 10.750 300 9 23⁄4 48.5

250 273.1 20.7 229 69 22.0

12 12.750 300 10 23⁄4 66.0

300 323.9 20.7 254 69 29.0

Available fabricated Schedule 10 only.
Drain elbow has a standard 1" female NPT outlet

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Max
Working
Pressure

Dimensions

C to E H

Approx.

Wt. Ea.

GRUVLOK

Grooved Fittings

Y

X

A

Z

NPT

Next Page

Previous Page

Return

fig. 7091

end-oF-line Fitting

®

Nominal

Size

Run x

Branch

In./DN(mm) In./mm PSI/bar In./mm In./mm In./mm Lbs./kg

O.D.

Max.

Pressure

11⁄2 x 1⁄2 1.900 300

Wk.

Coupling Dimensions

A X Y

5

⁄8 13⁄4 15⁄16 0.8

40 x 15 48 20.7 16 44 33 0.3

11⁄2 x 3⁄4 1.900 300

GRUVLOK

40 x 20 48 20.7 16 44 33 0.3

11⁄2 x 1 1.900 300

5

⁄8 13⁄4 15⁄16 0.8

5

⁄8 17⁄8 13⁄8 0.8

40 x 25 48 20.7 16 48 35 0.3

2 x 1⁄2 2.375 300

50 x 15 60 20.7 16 44 40 0.4

2 x 3⁄4 2.375 300

70 www.anvilintl.com

50 x 20 60 20.7 16 44 40 0.4

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

5

⁄8 13⁄4 19⁄16 1.0

5

⁄8 13⁄4 19⁄16 1.0

figuRe 7091 end-of-line fitting

Approx.

Wt. Ea.

Nominal

Size

Run x

Branch

In./DN(mm) In./mm PSI/bar In./mm In./mm In./mm Lbs./kg

2 x 1 2.375 300

50 x 25 60 20.7 16 48 41 0.4

21⁄2 x 1⁄2 2.875 300

65 x 15 73 20.7 16 44 44 0.6

21⁄2 x 3⁄4 2.875 300

65 x 20 73 20.7 16 44 44 0.6

21⁄2 x 1 2.875 300

65 x 25 73 20.7 16 48 46 0.6

O.D.

Max.

Wk.

Pressure

Coupling Dimensions

A X Y

5

⁄8 17⁄8 15⁄8 1.0

5

⁄8 13⁄4 13⁄4 1.4

5

⁄8 13⁄4 13⁄4 1.4

5

⁄8 17⁄8 113⁄16 1.4

Approx.

Wt. Ea.

Grooved Fittings

O.D.

C to E

O.D.

C to E

C to E

Next Page

Previous Page

Return

fig. 7450

90° Short pattern elbow

figuRe 7450 90° elBow

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

2 2.375 23⁄4 1.7

50 60.3 70 0.8

21⁄2 2.875 3 2.6

65 73.0 76 1.2

3 3.500 33⁄8 3.5

80 88.9 86 1.6

4 4.500 4 6.5

100 114.3 102 3.0

6 6.625 51⁄2 14.8

150 168.3 140 6.7

8 8.625 6

200 219.1 175 11.6

See the Gruvlok Catalog for additional information See the Gruvlok Catalog for additional information

O.D.

ANVIL PIPE FITTERS HANDBOOK 71

Center
to End

7

⁄8

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Approx.

Wt. Ea.

25.6

fig. 7460

Short pattern tee

Figure 7460 Tee

Nominal

Size

In./DN(mm) In./mm In./mm Lbs./Kg

2 2.375 23⁄4 2.5

50 60.3 70 1.1

21⁄2 2.875 3 3.5

65 73.0 76 1.6

3 3.500 33⁄8 4.8

80 88.9 86 2.2

4 4.500 4 8.1

100 114.3 102 3.7

6 6.625 51⁄2 19.1

150 168.3 140 8.7

8 8.625 67⁄8 35.2

200 219.1 175 16.0

O.D.

Center

to End

Approx.

Wt. Ea.

®

GRUVLOK

R

=3

D

O.D.

R=3D

O.D.

Grooved Fittings

Next Page

Previous Page

Return

fig. 7050 3d

long radiuS 90° elbow

fig. 7057 3d

long radiuS 60° elbow

®

figuRe 7050-3d 90° elBow

Nom.

Size

In./

DN(mm)

2 2.375 10 5.3

50 60.3 254 2.4

21⁄2 2.875 111⁄2 9.5

65 73 292 4.3

3 3.500 13 14.0

80 88.9 330 6.4

GRUVLOK

31⁄2 4.000 141⁄2 18.6

90 101.6 368 8.4

4 4.500 16 24.1

100 114.3 406 10.9

5 5.563 20 40.9

125 141.3 508 18.6

6 6.625 24 63.7

150 168.3 610 28.9

8 8.625 32 127.8

200 219.1 813 58.0

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

72 www.anvilintl.com

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 40 226.4

250 273.1 1016 102.7

12 12.750 48 332.7

300 323.9 1219 150.9

14 14.000 56 427.3

350 355.6 1422 193.8

16 16.000 64 560.1

400 406.4 1626 254.1

18 18.000 72 710.7

450 457.2 1829 322.4

20 20.000 80 879.3

500 508 2032 398.8

24 24.000 96 1270.3

600 609.6 2438 576.2

Center

to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

2 2.375

50 60.3

21⁄2 2.875

65 73

3 3.500

80 88.9

31⁄2 4.000

90 101.6

4 4.500

100 114.3

5 5.563

125 141.3

6 6.625

150 168.3

8 8.625

200 219.1

figuRe 7057-3d 60° elBow

Center

O.D.

In./mm In./mm Lbs./Kg

Approx.

to End

Wt. Ea.

71⁄2 4.3

191 2.0

81⁄4 7.7

210 3.5

91⁄4 11.0

235 5.0

10 14.4

254 6.5

11 18.5

279 8.4

133⁄4 31.3

349 14.2

161⁄2 48.8

419 22.1

22 97.9

559 44.4

Nom.

O.D.

Size

In./

In./mm In./mm Lbs./Kg

DN(mm)

10 10.750

250 273.1

12 12.750

300 323.9

14 14.000

350 355.6

16 16.000

400 406.4

18 18.000

450 457.2

20 20.000

500 508

24 24.000

600 609.6

Center

Approx.

to End

Wt. Ea.

271⁄4 173.4

692 78.7

323⁄4 254.8

832 115.6

381⁄4 327.3

972 148.5

433⁄4 429.0

1111 194.6

491⁄4 544.4

1251 246.9

543⁄4 673.5

1391 305.5

651⁄2 973.0

1664 441.3

R=3D

O.D.

R=

3

D

O.D.

Grooved Fittings

Next Page

Previous Page

Return

fig. 7051 3d

long radiuS 45° elbow

fig. 7058 3d

long radiuS 30° elbow

®

figuRe 7051-3d 45° elBow

Nom.

Size

In./

DN(mm)

2 2.375 61⁄2 3.9

50 60.3 165 1.8

21⁄2 2.875 71⁄4 6.7

65 73 184 3.0

3 3.500 73⁄4 9.5

80 88.9 197 4.3

31⁄2 4.000 81⁄2 12.3

90 101.6 216 5.6

4 4.500 9 15.7

100 114.3 229 7.1

5 5.563 111⁄4 26.5

125 141.3 286 12.0

6 6.625 131⁄2 41.3

150 168.3 343 18.7

8 8.625 18 82.9

200 219.1 457 37.6

ANVIL PIPE FITTERS HANDBOOK 73

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 221⁄2 146.9

250 273.1 572 66.6

12 12.750 27 215.9

300 323.9 686 97.9

14 14.000 311⁄2 227.3

350 355.6 800 103.1

16 16.000 36 363.5

400 406.4 914 164.9

18 18.000 401⁄2 461.3

450 457.2 1029 209.2

20 20.000 45 540.7

500 508 1143 245.3

24 24.000 533⁄4 824.4

600 609.6 1365 373.9

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Nom.

Size

In./

DN(mm)

2 2.375

50 60.3

21⁄2 2.875

65 73

3 3.500

80 88.9

31⁄2 4.000

90 101.6

4 4.500

100 114.3

5 5.563

125 141.3

6 6.625

150 168.3

8 8.625

200 219.1

figuRe 7058-3d 30° elBow

Center

O.D.

In./mm In./mm Lbs./Kg

Approx.

to End

Wt. Ea.

53⁄4 3.4

146 1.5

6 5.8

152 2.6

61⁄2 8.0

165 3.6

63⁄4 10.2

171 4.6

71⁄4 12.8

184 5.8

9 21.8

229 9.9

103⁄4 33.9

273 15.4

141⁄2 68.0

368 30.8

Nom.

O.D.

Size

In./

In./mm In./mm Lbs./Kg

DN(mm)

10 10.750

250 273.1

12 12.750

300 323.9

14 14.000

350 355.6

16 16.000

400 406.4

18 18.000

450 457.2

20 20.000

500 508

24 24.000

600 609.6

Center

Approx.

to End

Wt. Ea.

18 120.5

457 54.7

213⁄4 177.0

552 80.3

251⁄4 227.3

641 103.1

29 297.9

737 135.1

321⁄2 378.1

826 171.5

36 467.8

914 212.2

431⁄4 675.7

1099 304.1

GRUVLOK

R

=3

D

O.D.

R

=3

D

O.D.

Grooved Fittings

Next Page

Previous Page

Return

fig. 7052 3d

long radiuS 221⁄2° elbow

fig. 7053 3d

long radiuS 111⁄4° elbow

®

figuRe 7052-3d 221⁄2° elBow

Nom.

Size

In./

DN(mm)

2 2.375 51⁄4 3.2

50 60.3 133 1.5

21⁄2 2.875 51⁄2 5.3

65 73 140 2.4

3 3.500 53⁄4 7.3

80 88.9 146 3.3

GRUVLOK

31⁄2 4.000 6 9.2

90 101.6 152 4.2

4 4.500 61⁄2 11.4

100 114.3 165 5.2

5 5.563 8 19.4

125 141.3 203 8.8

6 6.625 91⁄2 30.1

150 168.3 241 13.7

8 8.625 123⁄4 60.5

74 www.anvilintl.com

200 219.1 324 27.4

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 16 107.2

250 273.1 406 48.6

12 12.750 191⁄4 157.5

300 323.9 489 71.4

14 14.000 221⁄2 202.3

350 355.6 572 91.8

16 16.000 251⁄2 265.2

400 406.4 648 120.3

18 18.000 283⁄4 336.5

450 457.2 730 152.6

20 20.000 32 416.3

500 508 813 188.8

24 24.000 381⁄4 601.4

600 609.6 972 272.8

Center

to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

2 2.375 41⁄2 2.8

50 60.3 114 1.3

21⁄2 2.875 43⁄4 4.6

65 73 121 2.1

3 3.500 5 6.2

80 88.9 127 2.8

31⁄2 4.000 5 7.6

90 101.6 127 3.4

4 4.500 51⁄4 9.3

100 114.3 133 4.2

5 5.563 61⁄2 15.8

125 141.3 165 7.2

6 6.625 73⁄4 24.6

150 168.3 197 11.2

8 8.625 101⁄2 49.3

200 219.1 267 22.4

figuRe 7053-3d 111⁄4° elBow

Center

to End

Approx.
Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 13 87.3

250 273.1 330 39.6

12 12.750 151⁄2 128.3

300 323.9 394 58.2

14 14.000 181⁄4 164.8

350 355.6 464 74.8

16 16.000 203⁄4 216.0

400 406.4 527 98.0

18 18.000 23.35 274.1

450 457.2 593 124.3

20 20.000 26 339.2

500 508 660 153.9

24 24.000 31 490.0

600 609.6 787 222.3

Center

to End

Approx.

O.D.

In./mm In./mm Lbs./Kg

Wt. Ea.

R=

5

D

O.D.

R= 5D

O.D.

Grooved Fittings

Next Page

Previous Page

Return

fig. 7050 5d

long radiuS 90° elbow

fig. 7057 5d

long radiuS 60° elbow

®

figuRe 7050-5d 90° elBow

Nom.

Size

In./

DN(mm)

2 2.375 14 7.2

50 60.3 356 3.3

21⁄2 2.875 161⁄2 13.3

65 73 419 6.0

3 3.500 19 19.9

80 88.9 483 9.0

31⁄2 4.000 211⁄2 26.9

90 101.6 546 12.2

4 4.500 24 35.4

100 114.3 610 16.1

5 5.563 30 60.0

125 141.3 762 27.2

6 6.625 36 93.5

150 168.3 914 42.4

8 8.625 48 187.6

200 219.1 1219 85.1

ANVIL PIPE FITTERS HANDBOOK 75

Center

to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 60 332.4

250 273.1 1524 150.8

12 12.750 72 488.4

300 323.9 1829 221.5

14 14.000 84 627.4

350 355.6 2134 284.6

16 16.000 96 822.2

400 406.4 2438 372.9

18 18.000 108 1,043.4

450 457.2 2743 473.3

20 20.000 120 1,290.9

500 508 3048 585.5

24 24.000 144 1,864.8

600 609.6 3658 845.9

Center

to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Nom.

Size

In./

DN(mm)

2 2.375

50 60.3

21⁄2 2.875

65 73

3 3.500

80 88.9

31⁄2 4.000

90 101.6

4 4.500

100 114.3

5 5.563

125 141.3

6 6.625

150 168.3

8 8.625

200 219.1

figuRe 7057-5d 60° elBow

Center

O.D.

In./mm In./mm Lbs./Kg

Approx.

to End

Wt. Ea.

93⁄4 5.6

248 2.5

111⁄4 10.2

286 4.6

123⁄4 15.0

324 6.8

121⁄4 20.0

311 9.1

151⁄2 26.0

394 11.8

191⁄2 44.1

495 20.0

231⁄4 68.6

591 31.1

31 137.7

787 62.5

Nom.

O.D.

Size

In./

In./mm In./mm Lbs./Kg

DN(mm)

10 10.750

250 273.1

12 12.750

300 323.9

14 14.000

350 355.6

16 16.000

400 406.4

18 18.000

450 457.2

20 20.000

500 508

24 24.000

600 609.6

Center

Approx.

to End

Wt. Ea.

39 244.1

991 110.7

463⁄4 358.6

1187 162.7

541⁄2 460.7

1384 209.0

621⁄4 603.8

1581 273.9

70 766.2

1778 347.5

773⁄4 947.9

1975 430.0

931⁄4 1,369.3

2369 621.1

GRUVLOK

R=

5

D

O.D.

R=

5D

O.D.

Grooved Fittings

Next Page

Previous Page

Return

fig. 7051 5d

long radiuS 45° elbow

fig. 7058 5d

long radiuS 30° elbow

®

figuRe 7051-5d 45° elBow

Nom.

Size

In./

DN(mm)

2 2.375

50 60.3

21⁄2 2.875

65 73

3 3.500

80 88.9

GRUVLOK

31⁄2 4.000

90 101.6

4 4.500

100 114.3

5 5.563

125 141.3

6 6.625

150 168.3

8 8.625

200 219.1

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

76 www.anvilintl.com

Center

O.D.

In./mm In./mm Lbs./Kg

Approx.

to End

Wt. Ea.

81⁄4 4.8

210 2.2

91⁄4 8.6

235 3.9

101⁄4 12.5

260 5.7

111⁄4 16.5

286 7.5

121⁄2 21.3

318 9.7

151⁄2 36.1

394 16.4

181⁄2 56.2

470 25.5

241⁄2 112.8

622 51.2

Nom.

O.D.

Size

In./

In./mm In./mm Lbs./Kg

DN(mm)

10 10.750

250 273.1

12 12.750

300 323.9

14 14.000

350 355.6

16 16.000

400 406.4

18 18.000

450 457.2

20 20.000

500 508

24 24.000

600 609.6

Center

Approx.

to End

Wt. Ea.

303⁄4 199.9

781 90.7

37 293.7

940 133.2

43 377.3

1092 171.1

491⁄4 494.5

1251 224.3

551⁄4 627.6

1403 284.7

611⁄2 776.4

1562 352.2

733⁄4 1,121.6

1873 508.7

Nom.

Size

In./

DN(mm)

2 2.375 63⁄4 4.0

50 60.3 171 1.8

21⁄2 2.875 71⁄2 7.0

65 73 191 3.2

3 3.500 8 10.0

80 88.9 203 4.5

31⁄2 4.000 83⁄4 13.0

90 101.6 222 5.9

4 4.500 91⁄2 16.6

100 114.3 241 7.5

5 5.563 113⁄4 28.1

125 141.3 298 12.7

6 6.625 14 43.8

150 168.3 356 19.9

8 8.625 183⁄4 87.9

200 219.1 476 39.9

figuRe 7058-5d 30° elBow

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 231⁄2 155.8

250 273.1 597 70.7

12 12.750 28 228.9

300 323.9 711 103.8

14 14.000 323⁄4 294.0

350 355.6 832 133.4

16 16.000 371⁄2 385.3

400 406.4 953 174.8

18 18.000 421⁄4 489.0

450 457.2 1073 221.8

20 20.000 463⁄4 605.0

500 508 1187 274.4

24 24.000 561⁄4 873.9

600 609.6 1429 396.4

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

R

=

5D

O.D.

R= 5D

O.D.

Grooved Fittings

Next Page

Previous Page

Return

fig. 7052 5d

long radiuS 221⁄2° elbow

fig. 7053 5d

long radiuS 111⁄4° elbow

®

figuRe 7052-5d 221⁄2° elBow

Nom.

Size

In./

DN(mm)

2 2.375 6 3.6

50 60.3 152 1.6

21⁄2 2.875 61⁄2 6.2

65 73 165 2.8

3 3.500 7 8.8

80 88.9 178 4.0

31⁄2 4.000 71⁄2 11.3

90 101.6 191 5.1

4 4.500 8 14.3

100 114.3 203 6.5

5 5.563 10 24.1

125 141.3 254 10.9

6 6.625 12 37.6

150 168.3 305 17.1

8 8.625 16 75.4

200 219.1 406 34.2

ANVIL PIPE FITTERS HANDBOOK 77

Center

to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 20 133.7

250 273.1 508 60.6

12 12.750 24 196.4

300 323.9 610 89.1

14 14.000 28 252.3

350 355.6 711 114.4

16 16.000 32 330.7

400 406.4 813 150.0

18 18.000 36 419.7

450 457.2 914 190.4

20 20.000 40 519.2

500 508 1016 235.5

24 24.000 48 750.1

600 609.6 1219 340.2

Center

to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Nom.

Size

In./

DN(mm)

2 2.375 5 3.0

50 60.3 127 1.4

21⁄2 2.875 51⁄4 5.0

65 73 133 2.3

3 3.500 51⁄2 6.9

80 88.9 140 3.1

31⁄2 4.000 53⁄4 8.7

90 101.6 146 3.9

4 4.500 6 10.7

100 114.3 152 4.9

5 5.563 71⁄2 18.2

125 141.3 191 8.3

6 6.625 9 28.3

150 168.3 229 12.8

8 8.625 12 56.8

200 219.1 305 25.8

figuRe 7053-5d 111⁄4° elBow

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 15 100.6

250 273.1 381 45.6

12 12.750 18 147.8

300 323.9 457 67.0

14 14.000 21 189.8

350 355.6 533 86.1

16 16.000 24 248.8

400 406.4 610 112.9

18 18.000 27 315.7

450 457.2 686 143.2

20 20.000 30 390.6

500 508 762 177.2

24 24.000 353⁄4 564.3

600 609.6 908 256.0

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

GRUVLOK

R=

6

D

O.D.

R= 6D

O.D.

Grooved Fittings

Next Page

Previous Page

Return

fig. 7050 6d

long radiuS 90° elbow

fig. 7057 6d

long radiuS 60° elbow

®

figuRe 7050-6d 90° elBow

Nom.

Size

In./

DN(mm)

2 2.375

50 60.3

21⁄2 2.875

65 73

3 3.500

80 88.9

GRUVLOK

31⁄2 4.000

90 101.6

4 4.500

100 114.3

5 5.563

125 141.3

6 6.625

150 168.3

8 8.625

200 219.1

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

78 www.anvilintl.com

Center

O.D.

In./mm In./mm Lbs./Kg

Approx.

to End

Wt. Ea.

16 8.2

406 3.7

19 15.2

483 6.9

22 22.9

559 10.4

25 31.1

635 14.1

28 41.1

711 18.6

35 69.6

889 31.6

42 108.4

1067 49.2

56 217.5

1422 98.7

Nom.

O.D.

Size

In./

In./mm In./mm Lbs./Kg

DN(mm)

10 10.750

250 273.1

12 12.750

300 323.9

14 14.000

350 355.6

16 16.000

400 406.4

18 18.000

450 457.2

20 20.000

500 508

24 24.000

600 609.6

Center

Approx.

to End

Wt. Ea.

70 385.4

1778 174.8

84 566.2

2134 256.8

98 727.4

2489 329.9

112 953.3

2845 432.4

126 1,209.7

3200 548.7

140 1,496.6

3556 678.8

168 2,162.0

4267 980.7

Nom.

Size

In./

DN(mm)

2 2.375 11 6.3

50 60.3 279 2.9

21⁄2 2.875 123⁄4 11.4

65 73 324 5.2

3 3.500 141⁄2 17.0

80 88.9 368 7.7

31⁄2 4.000 161⁄4 22.8

90 101.6 413 10.3

4 4.500 18 29.8

100 114.3 457 13.5

5 5.563 221⁄4 50.5

125 141.3 565 22.9

6 6.625 263⁄4 78.6

150 168.3 679 35.7

8 8.625 353⁄4 157.7

200 219.1 908 71.5

figuRe 7057-6d 60° elBow

Center

to End

Approx.
Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 443⁄4 279.4

250 273.1 1137 126.7

12 12.750 531⁄2 410.5

300 323.9 1359 186.2

14 14.000 621⁄2 527.3

350 355.6 1588 239.2

16 16.000 711⁄2 691.1

400 406.4 1816 313.5

18 18.000 801⁄2 877.1

450 457.2 2045 397.8

20 20.000 891⁄4 1,085.1

500 508 2267 492.2

24 24.000 1071⁄4 1,567.5

600 609.6 2724 711.0

Center

to End

Approx.

O.D.

In./mm In./mm Lbs./Kg

Wt. Ea.

R

=

6D

O.D.

R

=

6D

O.D.

Grooved Fittings

Next Page

Previous Page

Return

fig. 7051 6d

long radiuS 45° elbow

fig. 7058 6d

long radiuS 30° elbow

®

figuRe 7051-6d 45° elBow

Nom.

Size

In./

DN(mm)

2 2.375 9 5.3

50 60.3 229 2.4

21⁄2 2.875 101⁄4 9.5

65 73 260 4.3

3 3.500 111⁄2 14.0

80 88.9 292 6.4

31⁄2 4.000 123⁄4 18.6

90 101.6 324 8.4

4 4.500 14 24.1

100 114.3 356 10.9

5 5.563 171⁄2 40.9

125 141.3 445 18.6

6 6.625 21 63.7

150 168.3 533 28.9

8 8.625 28 127.8

200 219.1 711 58.0

ANVIL PIPE FITTERS HANDBOOK 79

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 35 226.4

250 273.1 889 102.7

12 12.750 413⁄4 332.7

300 323.9 1060 150.9

14 14.000 483⁄4 427.3

350 355.6 1238 193.8

16 16.000 553⁄4 560.1

400 406.4 1416 254.1

18 18.000 623⁄4 710.7

450 457.2 1594 322.4

20 20.000 693⁄4 879.3

500 508 1772 398.8

24 24.000 833⁄4 1,270.3

600 609.6 2127 576.2

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Nom.

Size

In./

DN(mm)

2 2.375 71⁄4 4.3

50 60.3 184 2.0

21⁄2 2.875 8 7.7

65 73 203 3.5

3 3.500 83⁄4 11.0

80 88.9 222 5.0

31⁄2 4.000 93⁄4 14.4

90 101.6 248 6.5

4 4.500 101⁄2 18.5

100 114.3 267 8.4

5 5.563 13 31.3

125 141.3 330 14.2

6 6.625 153⁄4 48.8

150 168.3 400 22.1

8 8.625 21 97.9

200 219.1 533 44.4

figuRe 7058-6d 30° elBow

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 26 173.4

250 273.1 660 78.7

12 12.750 311⁄4 254.8

300 323.9 794 115.6

14 14.000 361⁄2 327.3

350 355.6 927 148.5

16 16.000 413⁄4 429.0

400 406.4 1060 194.6

18 18.000 47 544.4

450 457.2 1194 246.9

20 20.000 521⁄4 673.5

500 508 1327 305.5

24 24.000 621⁄2 973.0

600 609.6 1588 441.3

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

GRUVLOK

R

=

6D

O.D.

R

= 6D

O.D.

Grooved Fittings

Next Page

Previous Page

Return

fig. 7052 6d

long radiuS 221⁄2° elbow

fig. 7053 6d

long radiuS 111⁄4° elbow

®

figuRe 7052-6d 221⁄2° elBow

Nom.

Size

In./

DN(mm)

2 2.375 61⁄2 3.9

50 60.3 165 1.8

21⁄2 2.875 7 6.7

65 73 178 3.0

3 3.500 71⁄2 9.5

80 88.9 191 4.3

GRUVLOK

31⁄2 4.000 81⁄4 12.3

90 101.6 210 5.6

4 4.500 83⁄4 15.7

100 114.3 222 7.1

5 5.563 11 26.5

125 141.3 279 12.0

6 6.625 131⁄4 41.3

150 168.3 337 18.7

8 8.625 171⁄2 82.9

80 www.anvilintl.com

200 219.1 445 37.6

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your Anvil local sales representative.

Center
to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 22 146.9

250 273.1 559 66.6

12 12.750 261⁄4 215.9

300 323.9 667 97.9

14 14.000 303⁄4 277.3

350 355.6 781 125.8

16 16.000 351⁄4 363.5

400 406.4 895 164.9

18 18.000 391⁄2 461.3

450 457.2 1003 209.2

20 20.000 44 570.7

500 508 1118 258.9

24 24.000 52.34 824.4

600 609.6 1329 373.9

Center

to End

Approx.

Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

2 2.375 51⁄4 3.2

50 60.3 133 1.5

21⁄2 2.875 51⁄2 5.3

65 73 140 2.4

3 3.500 53⁄4 7.3

80 88.9 146 3.3

31⁄2 4.000 6 9.2

90 101.6 152 4.2

4 4.500 61⁄2 11.4

100 114.3 165 5.2

5 5.563 8 19.4

125 141.3 203 8.8

6 6.625 91⁄2 30.1

150 168.3 241 13.7

8 8.625 123⁄4 60.5

200 219.1 324 27.4

figuRe 7053-6d 111⁄4° elBow

Center

to End

Approx.
Wt. Ea.

O.D.

In./mm In./mm Lbs./Kg

Nom.

Size

In./

DN(mm)

10 10.750 16 107.2

250 273.1 406 48.6

12 12.750 19 157.5

300 323.9 483 71.4

14 14.000 221⁄4 202.3

350 355.6 565 91.8

16 16.000 251⁄2 265.2

400 406.4 648 120.3

18 18.000 283⁄4 336.5

450 457.2 730 152.6

20 20.000 313⁄4 416.3

500 508 806 188.8

24 24.000 381⁄4 601.4

600 609.6 972 272.8

Center

to End

Approx.

O.D.

In./mm In./mm Lbs./Kg

Wt. Ea.

Lock with 5/16"

Shackle or

OSHA Lockout

(Not Supplied

with Valve)

K

F

G

H

M

C

E

B

N

J

O.D.

P

R

A

L

U

S

T

CLOSED

OPEN

SerieS 7700

Next Page

Previous Page

Return

Butterfly ValVe

Valves & Accessories

®

SerieS 7700 - Butterfly ValVe DimenSionS

Dimensions

2 21⁄2 3 4 5 6 8 10 12

In./mm 50 65 80 100 125 150 200 250 300

O.D. 23⁄8 27⁄8 31⁄2 41⁄2 59⁄16 65⁄8 85⁄8 103⁄4 123⁄4

In./mm 60.3 73.0 88.9 114.3 141.3 168.3 219.1 273.1 323.9

A

B

C

D

E

F

ANVIL PIPE FITTERS HANDBOOK 81

33⁄16 313⁄16 313⁄16 45⁄8 513⁄16 513⁄16 51⁄4 61⁄4 61⁄2

81.0 96.8 96.8 117.3 147.6 147.6 133.4 158.8 165.1

3 33⁄16 313⁄16 41⁄4 5 51⁄2 615⁄16 8 9

75.4 80.8 96.5 108.5 126.5 138.9 175.8 202.9 229.4

43⁄16 43⁄8 51⁄16 53⁄8 57⁄8 63⁄8 73⁄4 91⁄2 101⁄2

105.9 111.3 129.0 136.7 149.4 161.8 196.9 240.3 266.7

11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 15⁄8 15⁄8 15⁄8

26.9 26.9 26.9 26.9 26.9 26.9 41.1 41.1 41.1

7

⁄16

11.1 11.1 11.1 11.1 11.1 11.1 19.1 19.1 19.1

3 3 3 3 3 3 5 5 5

76.2 76.2 76.2 76.2 76.2 76.2 127.0 127.0 127.0

7

⁄16

7

⁄16

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

Valve Size (ANSI/DN)

7

⁄16

7

⁄16

7

⁄16

3

⁄4

3

⁄4

3

⁄4

GRUVLOK

Valves & Accessories

Next Page

Previous Page

Return

SerieS 7700 - Butterfly ValVe DimenSionS

Dimensions

In./mm 50 65 80 100 125 150 200 250 300

G

H

®

J

K

L

M

N

P

GRUVLOK

R

S

T

U

3" or 5" handwheels may be included on valves sizes 2" - 4". Contact your Anvil Rep. for additional information.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

82 www.anvilintl.com

2 21⁄2 3 4 5 6 8 10 12

9

⁄16

14.3 14.3 14.3 14.3 22.2 22.2 25.4 31.8 31.8

7

⁄16

9

⁄16

7

⁄16

9

⁄16

7

⁄16

11.1 11.1 11.1 11.1 11.1 11.1 13.5 13.5 13.5

- - - - -

- - - - - 3.3 34.8 47.0 70.1

3 3 3 3 3 3 5 5 5

76.2 76.2 76.2 76.2 76.2 76.2 127.0 127.0 127.0

55⁄16 51⁄2 61⁄4 61⁄2 7 71⁄2 97⁄16 - -

135.1 140.5 158.2 165.9 178.6 191.0 240.3 - -

101⁄2 101⁄2 101⁄2 101⁄2 101⁄2 101⁄2 15 - -

266.7 266.7 266.7 266.7 266.7 266.7 381.0 - -

713⁄16 8 811⁄16 9 91⁄2 10 1415⁄16 165⁄8 2011⁄16

198.0 203.3 221.1 228.7 241.4 253.9 379.2 422.7 525.3

4 4 4 4 4 4 81⁄16 81⁄16 115⁄8

102.1 102.1 102.1 102.1 102.1 102.1 204.5 204.5 295.4

11⁄2 11⁄2 11⁄2 11⁄2 11⁄2 11⁄2 25⁄16 25⁄16 29⁄16

38.2 38.2 38.2 38.2 38.2 38.2 58.5 58.5 65.5

2 2 2 2 2 2 25⁄8 25⁄8 31⁄4

51.0 51.0 51.0 51.0 51.0 51.0 66.0 66.0 83.0

65⁄16 65⁄16 65⁄16 65⁄16 65⁄16 65⁄16 1013⁄16 1013⁄16 1313⁄16

160.3 160.3 160.3 160.3 160.3 160.3 275.3 275.3 350.3

5 5 5 5 5 5 12 12 18

127.0 127.0 127.0 127.0 127.0 127.0 304.8 304.8 457.2

Valve Size (ANSI/DN)

9

⁄16

7

⁄16

7

⁄8

7

⁄16

7

⁄8 1 11⁄4 11⁄4

7

⁄16

1

⁄8 13⁄8 17⁄8 23⁄4

1

⁄2

1

⁄2

1

⁄2

G REF.

F REF.

C

E

D

A

B

BLACK COATING

ORANGE
GRIP

K REF.

H REF.

L

SerieS 7600

Next Page

Previous Page

Return

Butterfly ValVes

Valves & Accessories

®

SerieS 7600 - Butterfly ValVe DimenSionS

Nom. Size

In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm

2 23⁄8 21⁄4 37⁄16

50 60.3 57.2 87.4 15.9 8.7 152.4 25.4 46.0 50.8 81.0

21⁄2 215⁄16 23⁄4 313⁄16

65 74.2 70.2 96.8 15.9 8.9 152.4 25.4 52.3 62.0 91.9

3 39⁄16 33⁄8 313⁄16

80 90.3 86.4 96.8 15.9 8.9 214.4 25.4 66.5 68.1 108.0

4 49⁄16 43⁄8 45⁄8

100 116.1 111.8 117.3 15.9 8.9 214.4 25.4 84.1 84.1 125.5

6 63⁄4 69⁄16 51⁄4

150 171.0 166.6 133.4 15.9 8.9 311.2 31.8 111.3 111.3 177.8

ANVIL PIPE FITTERS HANDBOOK 83

A B C D E F G H K L

5

⁄8

5

⁄8

5

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

⁄8

5

⁄8

5

⁄8

Dimensions

5

⁄16 6 1 113⁄16 2 33⁄16

3

⁄8 6 1 21⁄16 27⁄16 35⁄8

3

⁄8 87⁄16 1 25⁄8 211⁄16 41⁄4

3

⁄8 87⁄16 1 35⁄16 35⁄16 415⁄16

3

⁄8 121⁄4 11⁄4 43⁄8 43⁄8 7

GRUVLOK

K

DIA. HOLE

DIA.

BOLT HOLE

N

G

SIZE

OF KEY

J DIA.

E DIA.

C DIA.

A

B

D

L

M

F

R

P

POSITION
INDICATOR

GEAR OPERATOR

(Shown 90 out

of Position)

Valves & Accessories

Next Page

Previous Page

Return

SerieS 8000gr

Butterfly ValVe

®

Nominal

In./DN(mm) In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm

GRUVLOK

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

84 www.anvilintl.com

O.D. A B C D E F G J K L M N P R

Size

14 14.000 26.25 13.25 21.00 2.25 1.50 2.003⁄8 x 3⁄8 6.00 0.53 13.06 10.75 5.00 17.94 10.00

350 356 667 337 533 57 38 51 87 152 13 332 273 127 456 254

16 16.000 29.50 14.75 23.50 2.25 1.50 2.003⁄8 x 3⁄8 6.00 0.53 14.33 12.5 5.00 19.44 10.00

400 406 749 375 597 57 38 51 87 152 13 364 318 127 494 254

18 18.000 32.75 15.75 25.00 3.00 1.75 2.383⁄8 x 3⁄8 6.75 0.53 15.40 14.00 5.00 20.44 10.00

450 457 832 400 635 76 44 60 87 171 13 391 356 127 519 254

20 20.000 34.00 16.25 27.50 3.00 1.75 2.603⁄8 x 3⁄8 6.75 0.53 16.38 15.00 5.00 20.94 10.00

500 508 864 413 699 76 44 66 87 171 13 416 381 127 532 254

24 24.000 39.37 19.12 32.00 3.00 2.25 3.251⁄2 x 1⁄2 9.50 0.81 18.26 16.75 6.50 24.38 10.25

600 610 1,000 486 813 76 57 83 116 241 21 464 425 165 619 260

figure 8000gr - Butterfly ValVe DimenSionS

A

OPORT

C

D

Next Page

Previous Page

Return

Valves & Accessories

fig. 141S, fig. 171n & fig. 171S

InternatIonal Brass Ball ValVes

DimenSionS

Valve
Code

141S

Standard

Port

NOTES

1. Dimensions of solder joint ends
conform to ANSI B16.22. Solder
end valves are designed to be
used with solders not exceeding
a melting point of 470°F/250°C.
Higher temperatures may damage
the seal material.

2. For solder joint valves, the
pressure/temperature rating
is dependent on the solder
material used. Please refer to the
limitations listed in ANSI B16.18.

ANVIL PIPE FITTERS HANDBOOK 85

3. Rate of Flow Calculations for
liquids:

To determine the flow rate of a

liquid passing through a valve,
use the following formula:

Where: QL = flow of liquid in

gallons per minute (GPM)

CV = flow coefficient
∆P = pressure drop (PSI)
SL = specific gravity of liquid

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

Soldered

End

Port

Size

In./mm In./mm In./mm In./mm In./mm

1⁄21

15 12 52 98 46 0.3

3⁄49

A C D Cv

Dia.

⁄2 21⁄16 37⁄8 113⁄16 6.3 0.7

⁄16 211⁄16 37⁄8 115⁄16 9.5 0.8

Approx.

20 14 68 98 49 0.4

13⁄4 33⁄16 413⁄16 25⁄16 22.2 1.1

25 19 81 122 59 0.5

11⁄4 1 39⁄16 413⁄16 21⁄2 30.8 1.5

32 25 90 122 63 0.7

11⁄2 11⁄4 4 6 31⁄16 60.9 2.2

40 32 102 152 78 1.0

2 19⁄16 51⁄16 6 35⁄16 92.9 3.1

50 40 128 152 84 1.4

Wt. Ea.

Lbs./Kg

®

GRUVLOK

Valves & Accessories

Next Page

Previous Page

Return

fig. 141S, fig. 171n & fig. 171S

InternatIonal Brass Ball ValVes

DimenSionS

Valve
Code

®

171N

Full

Port

GRUVLOK

Threaded

End

Port

Size

In./mm In./mm In./mm In./mm In./mm

1

⁄4

8 10 51 98 45 0.1

3

⁄8

10 10 51 98 45 0.1

1⁄29

15 14 62 98 48 0.2

3

⁄4

A C D Cv

Dia.

3

⁄8 2 37⁄8 13⁄4 6 0.3

3

⁄8 2 37⁄8 13⁄4 7 0.3

⁄16 27⁄16 37⁄8 17⁄8 19 0.4

3

⁄4 211⁄16 413⁄16 21⁄4 35 0.7

Approx.

Wt. Ea.

Lbs./Kg

20 19 68 122 57 0.3

115⁄16 31⁄16 413⁄16 27⁄16 50 1.0

25 24 78 122 62 0.5

11⁄4 11⁄4 37⁄16 6 31⁄16 104 2.0

32 32 87 152 78 0.9

11⁄2 19⁄16 37⁄8 6 35⁄16 268 3.1

40 40 98 152 84 1.4

2 115⁄16 45⁄16 63⁄8 313⁄16 309 4.2

50 49 110 162 97 1.9

21⁄2 29⁄16 59⁄16 81⁄16 5 629 8.0

65 65 141 205 127 3.7

Valve
Code

171S

Full
Port

Soldered

End

Size

In./mm In./mm In./mm In./mm In./mm

1⁄29

15 14 64 98 48 0.2

3

20 19 76 122 59 0.3

25 25 91 122 64 0.5

11⁄4 11⁄4 49⁄16 6 31⁄8 104 2.0

32 32 103 152 79 0.9

11⁄2 19⁄16 49⁄16 6 33⁄8 268 2.7

40 40 116 152 86 1.2

50 49 138 164 94 1.8

21⁄2 29⁄16 67⁄8 87⁄16 5 629 9.4

65 65 175 205 127 4.3

75 79 208 205 138 6.6

100 100 262 260 160 11.2

DimenSionS

Port

A C D Cv

Dia.

⁄16 21⁄2 37⁄8 17⁄8 19 0.5

⁄43⁄4 3 413⁄16 25⁄16 35 0.7

1 1 39⁄16 413⁄16 21⁄2 50 1.1

2 115⁄16 57⁄16 67⁄16 311⁄16 309 3.9

3 31⁄8 83⁄16 81⁄16 57⁄16 1018 14.5

4 315⁄16 105⁄16 101⁄4 65⁄16 1622 24.7

Approx.

Wt. Ea.

Lbs./Kg

3 31⁄8 67⁄16 85⁄16 57⁄16 1018 12.0

75 79 164 205 138 5.9

4 315⁄16 75⁄8 101⁄4 65⁄16 1622 22.0

100 100 194 260 160 10.0

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

86 www.anvilintl.com

A

F

D

Valve
Pipe O.D.

E

C

B

Next Page

Previous Page

Return

Valves & Accessories

fig. 7500

Ball ValVes

SerieS 7500 - Ball ValVe

Size

ANSI

In./DN(mm) In./mm In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg

O.D.

A B C D E F Cv

2 2.375 51⁄2 23⁄4 81⁄4 313⁄16 115⁄16 41⁄8 165 8

50 60.3 140 70 209 81 49 105 3.6

3 3.500 63⁄4 33⁄8 10 413⁄16 27⁄8 413⁄16 310 18

80 88.9 171 85 254 122 74 121 8.2

4 4.500 81⁄4 41⁄8 16 65⁄16 313⁄16 6 815 38

100 114.3 210 105 406 176 97 152 17.2

6 * 6.625 101⁄8 51⁄16 28 87⁄16 511⁄16 75⁄8 1500 106

150 168.3 257 128 711 215 144 194 48.1

* Bare Stem

ANVIL PIPE FITTERS HANDBOOK 87

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

Dimensions

Approx.

Wt. Ea.

®

GRUVLOK

Valves & Accessories

OPEN

CLOSED

A

B

E

H

G

J

B

F

C

L

K

D

Next Page

Previous Page

Return

SerieS 7500

Ball ValVes

®

GRUVLOK

Size

ANSI

In./DN(mm) In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg

88 www.anvilintl.com

150 168.3 168.7 107.4 214.6 140.5 260.4 128.0 206.4 304.8 342.9 45.2 25.4 4.4

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

O.D.

6 6.625 65⁄8 41⁄4 87⁄16 51⁄2 101⁄4 51⁄16 81⁄8 12 131⁄2 113⁄16 1 9.6

A B C D E F G H J K L

SerieS 7500 - Ball ValVe With gear actuator

Dimensions

Approx.

Wt. Ea.

fig. 400g

A

B

Cv FLOW

Next Page

Previous Page

Return

GrooVed-end sIlent CheCk ValVe

Valves & Accessories

figure 400g - grooVeD-enD Silent check ValVe

Nom. Size O.D. Model A B

In./mm In./mm Number In./mm In./mm Lbs./Kg

2 2.375 402G 6 6 66 12

50 60.3

21⁄2 2.875 4025G 61⁄4 7 88 15

65 73.0

3 3.500 403G 67⁄16 71⁄2 130 20

80 88.9

4 4.500 404G 81⁄8 9 228 36

100 114.3

5 5.563 405G 111⁄4 10 350 50

125 141.3

6 6.625 406G 121⁄4 11 520 68

150 168.3

8 8.625 408G 133⁄4 131⁄2 900 140

200 219.1

10 10.750 410G 16 16 1,450 198

250 273.1

152 152

159 178

164 191

206 229

286 254

311 279

349 343

406 406

Cv

Flow

1,676 5.4

2,235 6.8

3,302 9.1

5,791 16.3

8,890 22.7

13,208 30.8

22,860 63.5

36,830 89.8

Approx.

Wt. Each

®

GRUVLOK

ANVIL PIPE FITTERS HANDBOOK 89

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

G

Hinge Pin Plug

1/2" NPT

1/2"
NPT

Lifting Eyebolt
(10" and 12"
Valves Only)

A

F

B

C

E

D

Valves & Accessories

Next Page

Previous Page

Return

SerieS 7800

CheCk ValVes

Nom.

Size

In./DN(mm) In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg.

®

21⁄2 2.875 71⁄4 27⁄16 19⁄16 13⁄4 313⁄16 35⁄8 41⁄2 10.5

100 114.3 206 79 57 64 128 108 152 6.1

125 141.3 248 89 70 61 147 117 171 8.6

150 168.3 324 108 84 79 159 171 216 15.2

GRUVLOK

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

90 www.anvilintl.com

200 219.1 365 128 100 102 150 203 260 26.8

250 273.1 457 160 125 115 175 233 322 59.0

300 323.9 533 185 152 128 184 264 375 83.0

O.D.

A B C D E F G

2 2.375 63⁄4 23⁄8 17⁄16 13⁄4 41⁄2 33⁄16 43⁄8 7.5

50 60.3 171 60 36 44 114 81 111 3.4

65 73.0 184 61 39 44 96 92 114 4.8

3 3.500 73⁄4 25⁄8 2 113⁄16 41⁄16 311⁄16 415⁄16 11.5

80 88.9 197 67 51 46 103 93 125 5.2

4 4.500 81⁄8 31⁄8 21⁄4 21⁄2 51⁄16 41⁄4 6 13.5

5 5.563 93⁄4 31⁄2 23⁄4 27⁄16 513⁄16 45⁄8 63⁄4 19.0

6 6.625 123⁄4 41⁄4 35⁄16 31⁄8 61⁄4 63⁄4 81⁄2 33.5

8 8.625 143⁄8 51⁄16 315⁄16 4 515⁄16 8 101⁄4 59.0

10 10.750 18 65⁄16 415⁄16 49⁄16 67⁄8 93⁄16 1211⁄16 130.0

12 12.750 21 75⁄16 6 51⁄16 71⁄4 103⁄8 143⁄4 183.0

figure 7800 - check ValVe

Nominal Dimensions

Approx.

Wt. Ea.

gBV-g

G

B

F

E

C

A

Next Page

Previous Page

Return

BalanCInG ValVes

1

2

⁄2" to 12" Ductile Iron, Grooved-End Straight

Valves & Accessories

figure gBV-g - grooVeD-enD Straight Balancing ValVeS

Nom. Size O.D. A

In./DN(mm) In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg

B

Open

C E F

21⁄2 2.875 12 95⁄8 23⁄4 1 29⁄16 7 71⁄2 25

65 73.0 305 244 70 25 65 178 191 11.3

3 3.500 12 101⁄2 27⁄16 1 3 71⁄2 81⁄4 28

80 88.9 305 267 61 25 76 191 210 12.7

4 4.500 14 109⁄16 3 11⁄4 37⁄16 91⁄4 10 41

100 114.3 356 268 76 32 87 235 254 18.6

5 5.563 171⁄2 131⁄16 35⁄8 11⁄4 415⁄16 10 11 90

125 141.3 445 331 92 32 125 254 279 40.8

6 6.625 2011⁄16 13 3⁄4 47⁄16 2 57⁄8 11 121⁄2 130

150 168.3 525 349 112 51 149 279 318 59.0

8 8.625 283⁄16 245⁄8 511⁄16 21⁄4 77⁄8 131⁄2 15 310

200 219.1 716 625 144 57 200 343 381 140.6

10 10.750 30 261⁄2 69⁄16 21⁄4 915⁄32 16 171⁄2 460

250 273.1 762 673 166 57 240 406 445 208.7

12 12.750 381⁄16 287⁄16 75⁄8 21⁄4 125⁄8 19 201⁄2 870

300 323.9 966 722 194 57 321 483 521 394.6

ANVIL PIPE FITTERS HANDBOOK 91

NOTE: Grooved-Ends are for connection of components with dimensions conforming to Gruvlok® standard grooved

specifications for IPS pipe.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

Flange Diameter

G Flange

125#

G Flange

250#

Approx.

Wt. Each

®

GRUVLOK

Valves & Accessories

G

B

F

E

C

A

D

Next Page

Previous Page

Return

gBV-a

BalanCInG ValVe

21⁄2" to 12" Ductile Iron, Grooved-End Angle

figure gBV-a - grooVeD-enD angle Balancing ValVeS

Nom. Size O.D. A

®

In./DN(mm) In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg

B

Open

C D E F

21⁄2 2.875 73⁄8 95⁄8 23⁄4 45⁄8 1 29⁄16 7 71⁄2 25

65 73.0 187 244 70 117 25 65 178 191 11.3

3 3.500 83⁄8 101⁄2 27⁄16 37⁄8 1 3 71⁄2 81⁄4 28

80 88.9 213 267 61 98 25 76 191 210 12.7

4 4.500 95⁄8 109⁄16 3 43⁄8 11⁄4 37⁄16 91⁄4 10 41

100 114.3 244 268 76 111 32 87 235 254 18.6

5 5.563 12 131⁄16 35⁄8 51⁄2 11⁄4 415⁄16 10 11 90

125 141.3 305 331 92 140 32 125 254 279 40.8

6 6.625 141⁄8 13 3⁄4 47⁄16 65⁄8 2 57⁄8 11 121⁄2 130

GRUVLOK

150 168.3 359 349 112 168 51 149 279 318 59.0

8 8.625 1815⁄16 24 5⁄8 511⁄16 93⁄16 21⁄4 77⁄8 131⁄2 15 310

200 219.1 481 625 144 233 57 200 343 381 140.6

10 10.750 205⁄16 261⁄2 69⁄16 93⁄4 21⁄4 915⁄32 16 171⁄2 460

250 273.1 515 673 166 248 57 240 406 445 208.7

12 12.750 241⁄16 287⁄16 75⁄8 14 21⁄4 125⁄8 19 201⁄2 870

300 323.9 611 722 194 356 57 321 483 521 394.6

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

92 www.anvilintl.com

NOTE: Grooved-Ends are for connection of components with dimensions conforming to Gruvlok® standard grooved

specifications for IPS pipe.

Flange Diameter

G Flange

125#

G Flange

250#

Approx.

Wt. Each

B

A

C

A

B

C

Valves & Accessories

Next Page

Previous Page

Return

gBV-S (SolDer)

fIVe turn CIrCuIt BalanCInG ValVes

gBV-t (nPt-threaDeD)

fIVe turn CIrCuIt BalanCInG ValVes

®

moDel: gBV-S - 1⁄2" - 2"

Model

GBV050VS1⁄2" 33⁄16 49⁄16 23⁄4 1.1

GBV075VS3⁄4" 39⁄16 49⁄16 23⁄4 1.1

GBV100VS 1" 41⁄4 415⁄16 23⁄4 1.7

GBV125VS 11⁄4" 415⁄16 53⁄8 23⁄4 2.3

GBV150VS 11⁄2" 511⁄16 55⁄8 23⁄4 3.2

GBV200VS 2" 7 63⁄8 23⁄4 5.4

See Installation & Assembly directions on pages 186-191. See Installation & Assembly directions on pages 186-191.

ANVIL PIPE FITTERS HANDBOOK 93

Nominal

Size

In./DN(mm) In./mm In./mm In./mm Lbs./Kg

15 81 116 70 0.5

20 93 118 70 0.5

25 108 126 70 0.8

32 125 137 70 1.0

40 144 142 70 1.5

50 179 162 70 2.5

A B C

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

Approx.

Wt. Ea.

Model

GBV050VT1⁄2" 3 45⁄8 23⁄4 1.1

GBV075VT3⁄4" 31⁄4 47⁄8 23⁄4 1.2

GBV100VT 1" 313⁄16 51⁄4 23⁄4 1.9

GBV125VT 11⁄4" 45⁄16 55⁄8 23⁄4 2.3

GBV150VT 11⁄2" 51⁄16 57⁄8 23⁄4 3.5

GBV200VT 2" 6 611⁄16 23⁄4 6.0

moDel: gBV-t - 1⁄2" - 2"

Nominal

Size

In./DN(mm) In./mm In./mm In./mm Lbs./Kg

15 76 117 70 0.5

20 83 125 70 0.6

25 97 135 70 0.8

32 110 143 70 1.1

40 129 150 70 1.6

50 153 170 70 2.5

A B C

Approx.

Wt. Ea.

GRUVLOK

B

E (diameter)

C

A

G

F

Valves & Accessories

Next Page

Previous Page

Return

ftV-S (Straight)

trI-serVICe ValVe

moDel ftV-S - (Straight)

Connection

Size

®

GRUVLOK

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

94 www.anvilintl.com

In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm lbs/kg

21/2 12 7 23/4 1 29/16 7 71/2 19

65 305 178 70 25 65 178 191 9

880 305 198 62 25 76 191 210 11

100 356 203 76 32 87 235 254 19

125 445 257 92 32 125 254 279 37

150 525 264 113 51 149 279 318 54

200 716 579 144 57 200 343 381 136

10 30 285/8 69/16 21/4 915/32 16 171/2 450

250 762 727 167 57 241 409 445 204

12 381/16 325/8 75/8 21/4 125/8 19 201/2 850

300 967 829 194 57 321 483 521 390

AB (fully

open)

3 12 713/16 27/16 1 3 71/2 81/4 24

4 14 8 3 11/4 37/16 91/4 10 42

5 171/2 101/8 35/8 11/4 415/16 10 11 81

6 2011/16 103/8 47/16 2 57/8 11 121/2 120

8 283/16 2213/16 511/16 21/4 77/8 131/2 15 300

C E F

Flange

125/150 PSI

G

Flange

250/300 PSI

G

Approx.

Wt. Each

B

D

A

C

E (diameter)

F

G

Next Page

Previous Page

Return

ftV-a (angle BoDy)

trI-serVICe ValVe

Valves & Accessories

moDel ftV-a - (angle)

Connection

Size

In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm lbs/kg

21/2 73/8 7 23/4 45/8 1 29/16 7 71/2 19

65 187 178 70 117 25 65 178 191 9

880 208 198 62 98 25 76 191 210 11

100 244 203 76 111 32 87 235 254 19

125 305 257 92 140 32 125 254 279 37

150 359 264 113 168 51 149 279 318 54

200 481 476 144 233 57 200 343 381 136

10 205/16 24 69/16 93/4 21/4 915/32 16 171/2 450

250 516 610 167 248 57 241 409 445 204

12 241/16 261/4 75/8 14 21/4 125/8 19 201/2 860

300 611 667 194 356 57 321 483 521 390

AB (fully

open)

C D E F

3 83/16 713/16 27/16 37/8 1 3 71/2 81/4 24

4 95/8 8 3 43/8 11/4 37/16 91/4 10 42

5 12 101/8 35/8 51/2 11/4 415/16 10 11 81

6 141/8 103/8 47/16 65/8 2 57/8 11 121/2 120

8 1815/16 183/4 511/16 93/16 21/4 77/8 131/2 15 300

Flange

125/150 PSI

G

Flange

250/300 PSI

G

Approx.

Wt. Each

®

GRUVLOK

ANVIL PIPE FITTERS HANDBOOK 95

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

Valves & Accessories

2.0

5.0

50

3.0

.5

1

3

5

5.0 10 20 50 100 200 400
FLOWRATE (L/SEC)

PRESSURE DROP (MH

2

O)

PRESSURE DROP (FT. WG)

FLOWRATE (US GAL/SEC)

100 500 1000 2000 4000 6000

10

20

2.0

5.0

10

20

6"

2"

2-1/2"

Tri-Service Performance Curve

with Valve in Full Open Position

10"

12"

5"

4"

8"

Next Page

Previous Page

Return

ftV-S (Straight) anD ftV-a (angle BoDy)

trI-serVICe ValVe PerformanCe CurVe

Performance Curve
Valve in Full Open Position

1. Minimum Flow Rate – To ensure

sufficient flow to hold disc in full open

®

position during operation, size valves in
shaded area only of Performance Curve.

2. Maximum Flow Rate – Select valve in

shaded area only. However, consideration
should be given to selecting the valve with
the lowest pressure drop and velocity in
accordance with ASHRAE practice. This

96 www.anvilintl.com

will ensure a quiet, energy-efficient system
and maximum valve life.

GRUVLOK

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

ftV-S (Straight) anD ftV-a (angle BoDy)

0

0202040406060

80

12"

6"

5"

8"

10"

3"

4"

2-1/2"

80

100

100

PERCENT OF FULL OPEN

Inherent Flow Characteristic Curve

with Valve in Throttled Position

PERCENT OF MAX FLOW

Next Page

Previous Page

Return

trI-serVICe ValVe PerformanCe CurVe

1. Record the size of valve and stem position using the Flow Indicator Scale. Calculate
percentage of valve opening referring to table below:

2. Measure and record the differential pressure across the valve in the throttled position.

3. Locate percentage of valve opening on the bottom of Flow Characteristic Curve. Proj­ect line vertically up to intersect with the Valve Characteristic Curve and from this point
project line horizontally across to the left of the chart and record the percentage of
maximum flow rate.

4. On the Tri-Service Performance Curve locate the differential pressure obtained in Step
2 and project line horizontally across to intercept with Valve Performance Curve. Drop
a line vertically down to read the flow rate at the bottom of the chart.

5. To calculate flow rate of valve in the throttled position, multiply the flow rate from Step
4 by the percentage flow rate from Step 4 by the percentage flow rate from Step 2
divided by 100.

Example:

Valve size 4 in., Differential Pressure in 5.4 ft. (1.65m)•
Number of rings open 3, (3 rings / 6 rings x 100) = 50% throttled

Solution:

• From the Tri-service performance Curve, a 4 in. valve with 5.4 ft. pressure
drop (1.65m.) represents a flow of 400 USgpm (25.2 l/s).

• From Flow Characteristic, a 4 in. valve, 50% open, represents 34% of maximum flow.

• Approximate flow of a 4 in. valve, with a 5.4 ft. (1.65m) pressure drop when
50% throttled is: (400 x 34)/100 = 136 USgpm, (25.2 x 34)/100 = 8.57 L/sec.

ANVIL PIPE FITTERS HANDBOOK 97

Valve Size 21⁄2 3 4 5 6 8 10 12

Number of Rings
(Valve Full Open)

5 5 6 9 10 12 18 28

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

Valves & Accessories

®

GRUVLOK

Note: To prevent premature valve failure, it is not

recommended that the valve operate in the throttled
position with more than 25 ft. pressure differential.
Instead the pump inpeller should be trimmed or
valves located elsewhere in the system to partially
throttle the flow.

X

E to E

C to O

Y

Valves & Accessories

Next Page

Previous Page

Return

fig. 7260

GruVlok tee straIner

®

NOTE:

This illustration shows the

required orientation of the Rigidlok
access coupling for assembly with
a grooved-end flange.

Nom. Size O.D.

In./DN(mm) In./mm PSI/bar In./mm In./mm In./mm In./mm Clearance Lbs./Kg

2 2.375 750 61⁄2 41⁄4 31⁄2 57⁄8 43⁄8 6.0

50 60.3 51.7 165 108 89 149 111 2.7

21⁄2 2.875 750 71⁄2 43⁄4 4 61⁄2 51⁄8 8.0

GRUVLOK

98 www.anvilintl.com

65 73.0 51.7 191 121 102 165 130 3.6

3 3.500 750 81⁄2 51⁄4 43⁄4 7 6 13.0

80 88.9 51.7 216 133 121 178 152 5.9

4 4.500 750 10 61⁄8 57⁄8 83⁄8 71⁄4 19.0

100 114.3 51.7 254 156 149 213 184 8.6

5 5.563 750 11 65⁄8 7 101⁄8 81⁄4 30.0

125 141.3 51.7 279 168 178 257 210 13.6

6 6.625 750 13 75⁄8 81⁄8 111⁄8 93⁄4 45.0

150 168.3 51.7 330 194 206 283 248 20.4

8 8.625 600 151⁄2 91⁄8 101⁄2 141⁄8 12 79.0

200 219.1 41.4 394 232 267 359 305 35.8

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

Max.* Working

Pressure

E to E C to O X Y Basket Removal Approx. Wt. Ea.

figure 7260 - tee Strainer (continueS on next Page)

X

E to E

C to O

Y

Next Page

Previous Page

Return

Valves & Accessories

fig. 7260 (cont'D.)

GruVlok tee straIner

NOTE:

This illustration shows the

required orientation of the Rigidlok
access coupling for assembly with
a grooved-end flange.

figure 7260 - tee Strainer (continueS from PreViouS Page)

Nom. Size O.D.

In./DN(mm) In./mm PSI/bar In./mm In./mm In./mm In./mm Clearance Lbs./Kg

10 10.750 500 18 103⁄8 127⁄8 171⁄8 141⁄4 133

250 273.1 34.5 457 264 327 435 362 60.3

12 12.750 400 20 113⁄8 15 191⁄8 161⁄4 187

300 323.9 27.6 508 289 381 486 413 84.8

14 14.000 300 22 123⁄4 161⁄8 201⁄2 171⁄4 272

350 355.6 20.7 559 324 410 521 438 123.4

16 16.000 300 24 12 181⁄8 221⁄4 20 350

400 406.4 20.7 610 305 460 565 508 158.8

18 18.000 300 31 151⁄2 201⁄2 243⁄8 241⁄2 400

450 457.2 20.7 787 394 521 619 622 181.4

*Maximum working pressure is based upon the performance capability of the Gruvlok Strainer. Maximum system working pressure is dependent

upon the couplings used for installation and the pressure capability of other system components.
14" - 18" Fabricated
Not for use with copper systems.

ANVIL PIPE FITTERS HANDBOOK 99

Max.* Working

Pressure

E to E C to O X Y Basket Removal Approx. Wt. Ea.

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

®

GRUVLOK

B

C

(NPT)

D

Screen

Removal

A

Valves & Accessories

Next Page

Previous Page

Return

moDel 758g

GrooVed-end “Wye” straIner

Nominal Size O.D.

In./DN(mm) In./mm In./mm In./mm In./mm In./mm Lbs./Kg

®

2 2.375 77⁄8 51⁄4

50 60.3 200 133 25 178 5.4

21⁄2 2.875 10 61⁄2 1 93⁄4 18.0

65 73.0 254 165 25 248 8.2

3 3.500 101⁄8 7 1 10 23.0

80 88.9 257 178 25 254 10.4

4 4.500 121⁄8 81⁄4 11⁄2 12 42.0

100 114.3 308 210 38 305 19.1

5 5.563 155⁄8 111⁄4 2 17 80.0

125 141.3 396 286 51 432 36.3

6 6.625 181⁄2 131⁄2 2 20 112.0

150 168.3 470 343 51 508 50.8

GRUVLOK

8 8.625 215⁄8 151⁄2 2 223⁄4 205.0

200 219.1 549 394 51 577 93.0

For Gruvlok Technical Detail Refer to the Gruvlok Catalog or contact your local Anvil sales representative.

100 www.anvilintl.com

10 10.750 253⁄4 181⁄2 2 28 277.0

250 273.1 654 470 51 711 125.6

12 12.750 30 213⁄4 2 30 470.0

300 323.9 762 552 51 762 213.2

*Maximum working pressure is based upon the performance capability of the Gruvlok®

Strainer. Maximum system working pressure is dependant upon the couplings used for
installation and the pressure capacity of other system components.

Not for use with copper systems.

figure 758 g - grooVeD-enD “Wye” Strainer

Dimensions

A B

C

Plug Size

1

⁄2 7 12.0

D

Approx. Wt.

Each