Pioneer DJ XDJRR User Manual
All-IN-ONE DJ SYSTEM
XDJ-RR
pioneerdj.com/support/
rekordbox.com
For FAQs and other support information for this product, visit the above site.
Operating Instructions
Contents
How to read this manual
! Thank you for purchasing this Pioneer DJ product.
Be sure to read both this manual and the Operating Instructions
(Quick Start Guide). Both contain important information that you
should understand before using this product.
! In this manual, names of channels and buttons indicated on the
product, names of menus in the software, etc., are indicated within
square brackets ([ ]). (e.g. [CH1], [CUE] button, [Start] menu)
Before you start
Supported sources ..................................................................................... 3
Supported media ........................................................................................ 3
Supported music file formats .................................................................... 3
Preparing the software ............................................................................... 4
Obtaining the audio driver software ......................................................... 4
Installing the audio driver software ........................................................... 6
Setting utility software ................................................................................ 7
USB (LINK Export) connections driver software for rekordbox (Mac/
Windows) ..................................................................................................... 7
Connections
Connecting to the input/output terminals................................................ 8
Part names and functions
Power section ............................................................................................ 10
USB section............................................................................................... 10
Deck section .............................................................................................. 11
Browse section ......................................................................................... 16
Mixer/effect section .................................................................................. 23
Operation
Turning the power on ............................................................................... 26
Turning the power off ............................................................................... 26
Connecting and disconnecting USB devices ........................................ 26
Playback .................................................................................................... 26
Outputting sound ..................................................................................... 26
Using the quantize function .................................................................... 27
Calling out settings stored on a USB device .......................................... 27
Changing the color set in the USB device .............................................. 27
Changing the settings .............................................................................. 27
Auto-play mode ......................................................................................... 27
Auto standby function .............................................................................. 27
Language settings .................................................................................... 28
Setting preferences .................................................................................. 28
Using DJ software
Operating DJ software ............................................................................. 29
Additional information
Troubleshooting ........................................................................................ 30
Error messages ......................................................................................... 31
Icons displayed on the display of the main unit..................................... 32
iPhone/iPod ............................................................................................... 32
Trademarks and registered trademarks ................................................. 32
Software license notice ............................................................................ 32
Cautions on copyrights ............................................................................ 32
En
2
Before you start
Before you start
Supported sources
This unit supports the following sources
! USB devices
! Computers
Supported media
This unit supports USB mass storage class devices (external hard disks,
portable flash memory devices, digital audio players, etc.).
Folder levels
Maximum number of folders
Maximum number of files
File systems FAT16, FAT32 and HFS+ (NTFS is not supported)
! Tracks managed by rekordbox can be played with this unit by connecting a
mobile device on which rekordbox (for rekordbox (iOS/Android)) is installed with
this unit via USB.
For the latest supported devices, see the following Pioneer DJ support site.
pioneerdj.com/support/
! For details on rekordbox (iOS/Android), see the rekordbox online support site
(rekordbox.com).
! It takes time to read a connected USB device if the device contains many folders
and files.
! Folders and files exceeding the upper limits cannot be displayed.
Up to 8 levels (files in folders beyond the 8th
level cannot be played)
Unlimited (folders beyond the 10,000th folder
within a single folder cannot be displayed)
Unlimited (files beyond the 10,000th file within a
single folder cannot be displayed)
USB devices that cannot be used
! Optical disc devices such as external DVD/CD drives are not
supported.
! Do not use a USB hub.
! iPod cannot be used. (Music data on iPod touch or iPhone can only
be played on this unit if it is added to the rekordbox (iOS/Android)
library.)
Cautions on using USB devices
! Some USB devices may not operate properly when connected to this
unit. Pioneer DJ will accept no responsibility whatsoever for the loss
of data stored by the user on USB devices, or other direct or indirect
problems arising due to the connection of USB devices to this unit.
! When a current above the permissible level is passed through the
USB device insertion slot of this unit, the USB indicator will flash.
Communication may be stopped by stopping the power supply to
the USB device. To return to normal conditions, please remove the
USB device connected to this unit. Avoid re-using the USB device
for which an excess current has been detected. If the unit does not
return to the normal condition (no communication) after you perform
the above-mentioned procedure, turn the power of this unit off and
then on again.
! If multiple partitions are set on the USB device, only the first partition
can be used. (When rekordbox library information is present, the
partition containing the rekordbox library information has priority.)
! USB devices equipped with flash card readers may not operate when
connected to this unit.
! Depending on the USB device you are using, the desired perfor-
mance may not be achieved.
Supported music file formats
This unit supports the following music file formats.
Type File extension Compatible formats Bit depth Bit rate Sampling frequency
MP3 .mp3 MPEG-1 AUDIO LAYER-3 16 bit 32 kbps to 320 kbps 32 kHz, 44.1 kHz, 48 kHz CBR, VBR
AAC .m4a, .aac and .mp4
WAV .wav WAV 16 bit, 24 bit — 44.1 kHz, 48 kHz Uncompressed PCM
AIFF .aif, .aiff AIFF 16 bit, 24 bit — 44.1 kHz, 48 kHz Uncompressed PCM
MP3 files
MP3 files support constant bit rate (CBR) and variable bit rate (VBR)
files. Files in both bit rates can be played with this unit, but the searching
speed is slower for VBR files than for CBR files. To prioritize operability,
we recommend recording files in CBR.
MPEG-4 AAC LC 16 bit 16 kbps to 320 kbps 32 kHz, 44.1 kHz, 48 kHz CBR, VBR
MPEG-2 AAC LC 16 bit 16 kbps to 320 kbps 32 kHz, 44.1 kHz, 48 kHz CBR, VBR
ID3 tags
The tag information types which can be registered from a music file are
ID3 tags (v1, v1.1, v2.2.0, v2.3.0, and v2.4.0) or meta tags.
Music file artwork
AAC files
! AAC is the abbreviation for “Advanced Audio Coding”, a basic format
of audio compression technology used for MPEG-2 and MPEG-4.
! The file format and extension of AAC data depend on the application
used to create the data.
! AAC files with the “.m4a” (encoded with iTunes® ) , “.aac”, or “.mp4”
extension can be played with this unit. Copyright-protected files such
as those purchased from the iTunes Store cannot be played. Some
files cannot be played with this unit depending on the version of
iTunes used to encode the files.
JPEG files with the extension of “.jpg” or “.jpeg” can be added to music
files as artwork.
! Images larger than 800 x 800 pixels cannot be displayed.
Character displays
MP3/AAC
To display the information such as track names written in local character codes other than Unicode, select the language in the [LANGUAGE]
setting.
= Language settings (p. 28 )
Encoding
method
En
3
Preparing the software
Music management software, rekordbox, and the driver software are not
included with this product.
Access the rekordbox site and Pioneer DJ support site, and download
the rekordbox software and driver software respectively.
! Prepare a computer, network devices, etc., that are required to
access the internet.
rekordbox and rekordbox dj
! rekordbox is a composite software that enables track management
and DJ performances. Music files on computers and mobile devices
can be managed (analysis, setting, creation, and history storage)
with the music management software rekordbox. Excellent DJ performances can be achieved by using the music files managed by
rekordbox together with this unit.
! Enter the license key included with this product to use “rekord-
box dj”, the DJ performance function of rekordbox.
! For information on the latest system requirements, compatibil-
ity, and supported operating systems of rekordbox, see [System
Requirements] from [Support] on the Pioneer DJ website (rekordbox.com).
! Operation on all computers is not guaranteed, even if the computers
meet the required operating environment.
! The CPU and hard disc may not provide sufficient processing capa-
bilities depending on the power-saving setting, etc. on the computer.
Confirm that the computer meets the conditions to provide constant
high-performance (for example, connecting the computer to a power
outlet to maintain a stable power supply) especially when using
rekordbox on a laptop.
! A separate contract with an Internet service provider and payment of
the utilization fee are required to access the Internet.
! Use the latest version/service pack of the operating system.
Obtaining the rekordbox software
1 Launch a web browser on a computer and access
“rekordbox.com”.
2 Click [Download] in the [Download] menu of
“rekordbox.com”.
The rekordbox download page is displayed.
3 Click the download banner.
Downloading of rekordbox starts.
Installation (for Mac)
Do not connect this unit to a computer until installation and initial
setup have been completed.
! Close all the applications running on the computer before installing
the software.
1 Unzip the downloaded rekordbox software file.
2 Double-click the rekordbox software to launch the
installer.
3 Read the license agreement, and select [Agree] if you
agree to the terms.
Proceed by following the instructions on the screen.
! If you do not agree to the contents of the license agreement, click
[Disagree] to cancel the installation.
4 If the installation completion screen appears, click
[Close] to close the rekordbox installer.
Installation (for Windows)
Do not connect this unit to a computer until installation and initial
setup have been completed.
! Log in to the computer as the administrator before installation.
! Close all the applications running on the computer before installing
the software.
1 Unzip the downloaded rekordbox software file.
2 Double-click the rekordbox software to launch the
installer.
3 Read the license agreement, select [I agree to the
license terms and conditions] if you agree to the terms,
and click [Next].
After the installation destination is specified, the installation starts.
! If you do not agree to the license agreement, click [Close] to cancel
the installation.
4 If the installation completion screen appears, click
[Close] to close the rekordbox installer.
rekordbox (iOS/Android)
Tracks managed by rekordbox can be played by connecting the mobile
device on which rekordbox (iOS/Android) is installed via USB. For the
supported devices, see the Pioneer DJ website (rekordbox.com).
! For details on installing rekordbox (iOS/Android), see the Pioneer DJ
website (rekordbox.com).
Using the online support site
Before making inquiries on rekordbox operating procedures or technical
issues, read the rekordbox (Mac/Windows) user’s manual and online
manual and check the FAQ provided on the rekordbox online support
site.
<rekordbox online support site>
rekordbox.com
Obtaining the audio driver software
This driver software is dedicated to inputting sound to and outputting
sound from a computer. To use this unit while connected to a computer
with Windows, macOS or OS X installed, install this driver software on
the computer beforehand.
Software end user license agreement
This Software End User License Agreement (“Agreement”) is between
you (both the individual installing the Program and any single legal
entity for which the individual is acting) (“You” or “Your”) and Pioneer DJ
Corporation (“Pioneer DJ”).
TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS
THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT.
PERMISSION TO DOWNLOAD AND/OR USE THE PROGRAM IS
EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS.
WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE
THIS AGREEMENT VALID AND ENFORCEABLE. IF YOU DO NOT
AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE NOT
AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT
OR UNINSTALL IT, AS APPLICABLE.
1 DEFINITIONS
1 “Documentation” means written documentation, specifications
and help content made generally available by Pioneer DJ to aid in
installing and using the Program.
2 “Program” means all or any part of Pioneer DJ’s software
licensed to You by Pioneer DJ under this Agreement.
En
4
2 PROGRAM LICENSE
1 Limited License. Subject to this Agreement’s restrictions,
Pioneer DJ grants to You a limited, non-exclusive, non-transferable, license (without the right to sublicense):
a To install a single copy of the Program in Your computer or
mobile device, to use the Program only for Your personal purpose complying with this Agreement and the Documentation
(“Authorized Use”);
b To use the Documentation in support of Your Authorized Use;
and
c To make one copy of the Program solely for backup pur-
poses, provided that all titles and trademark, copyright and
restricted rights notices are reproduced on the copy.
2 Restrictions. You will not copy or use the Program or
Documentation except as expressly permitted by this Agreement.
You will not transfer, sublicense, rent, lease or lend the Program,
or use it for third-party training, commercial time-sharing or
service bureau use. You will not Yourself or through any third
party modify, reverse engineer, disassemble or decompile the
Program, except to the extent expressly permitted by applicable
law, and then only after You have notified Pioneer DJ in writing of
Your intended activities.
3 Ownership. Pioneer DJ or its licensor retains all right, title
and interest in and to all patent, copyright, trademark, trade
secret and other intellectual property rights in the Program and
Documentation, and any derivative works thereof. You do not
acquire any other rights, express or implied, beyond the limited
license set forth in this Agreement.
4 No Support. Pioneer DJ has no obligation to provide support,
maintenance, upgrades, modifications or new releases for the
Program or Documentation under this Agreement.
3 WARRANTY DISCLAIMER
THE PROGRAM AND DOCUMENTATION ARE PROVIDED “AS IS”
WITHOUT ANY REPRESENTATIONS OR WARRANTIES, AND YOU
AGREE TO USE THEM AT YOUR SOLE RISK. TO THE FULLEST EXTENT
PERMISSIBLE BY LAW, PIONEER DJ EXPRESSLY DISCLAIMS ALL
WARRANTIES OF ANY KIND WITH RESPECT TO THE PROGRAM AND
DOCUMENTATION, WHETHER EXPRESS, IMPLIED, STATUTORY,
OR ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF
DEALING OR USAGE OF TRADE, INCLUDING ANY WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
SATISFACTORY QUALITY, ACCURACY, TITLE OR NON-INFRINGEMENT.
4 EXPORT CONTROL AND COMPLIANCE WITH LAWS
AND REGULATIONS
You may not use or otherwise export or re-export the Program except as
authorized by United States law and the laws of the jurisdiction in which
the Program was obtained. In particular, but without limitation, the
Program may not be exported or re-exported (a) into any U.S.-embargoed
countries or (b) to anyone on the U.S. Treasury Department’s Specially
Designated Nationals List or the U.S. Department of Commerce Denied
Persons List or Entity List. By using the Program, you represent and warrant that you are not located in any such country or on any such list. You
also agree that you will not use the Program for any purposes prohibited
by United States law, including, without limitation, the development,
design, manufacture, or production of nuclear, missile, or chemical or
biological weapons.
5 U.S. GOVERNMENT RESTRICTED RIGHTS
The Program and Documentations are “commercial computer software”
and “commercial computer software documentation” as those terms are
defined in 48 C.F.R. §252.227-7014 (a) (1) (2007) and 252.227-7014 (a) (5)
(2007). The U.S. Government’s rights with respect to the Program and
Documentations are limited by this license pursuant to 48 C.F.R. §12.212
(Computer software) (1995) and 48 C.F.R. §12.211 (Technical data) (1995)
and/or 48 C.F.R. §227.7202-3, as applicable. As such, the Program and
Documentations are being licensed to the U.S. Government end users:
(a) only as “commercial items” as that term is defined in 48 C.F.R. §2.101
generally and as incorporated in DFAR 212.102; and (b) with only those
limited rights as are granted to the public pursuant to this license. Under
no circumstance will the U.S. Government or its end users be granted
any greater rights than we grant to other users, as provided for in this
license. Manufacturer is Pioneer DJ Corporation, 6F, Yokohama i-Mark
Place, 4-4-5 Minatomirai, Nishi-ku, Yokohama, Kanagawa, 220-0012
Japan
6 DAMAGES AND REMEDIES FOR BREACH
You agree that any breach of this Agreement’s restrictions would cause
Pioneer DJ irreparable harm for which money damages alone would be
inadequate. In addition to damages and any other remedies to which
Pioneer DJ may be entitled, You agree that Pioneer DJ may seek injunctive relief to prevent the actual, threatened or continued breach of this
Agreement.
7 TERMINATION
Pioneer DJ may terminate this Agreement at any time upon Your breach
of any provision. If this Agreement is terminated, You will stop using
the Program, permanently delete it from your computer or mobile
device where it resides, and destroy all copies of the Program and
Documentation in Your possession, confirming to Pioneer DJ in writing
that You have done so. Sections 2.2, 2.3, 2.4, 3, 4, 5, 6, 7 and 8 will continue in effect after this Agreement’s termination.
8 GENERAL TERMS
1 Limitation of Liability. In no event will Pioneer DJ or its subsidiar-
ies be liable in connection with this Agreement or its subject
matter, under any theory of liability, for any indirect, incidental,
special, consequential or punitive damages, or damages for lost
profits, revenue, business, savings, data, use, or cost of substitute procurement, even if advised of the possibility of such damages or if such damages are foreseeable. In no event will Pioneer
DJ’s liability for all damages exceed the amounts actually paid by
You to Pioneer DJ or its subsidiaries for the Program. The parties
acknowledge that the liability limits and risk allocation in this
Agreement are reflected in the Program price and are essential
elements of the bargain between the parties, without which
Pioneer DJ would not have provided the Program or entered into
this Agreement.
2 The limitations or exclusions of warranties and liability contained
in this Agreement do not affect or prejudice Your statutory rights
as consumer and shall apply to You only to the extent such limitations or exclusions are permitted under the laws of the jurisdiction where You are located.
3 Severability and Waiver. If any provision of this Agreement is held
to be illegal, invalid or otherwise unenforceable, that provision
will be enforced to the extent possible or, if incapable of enforcement, deemed to be severed and deleted from this Agreement,
and the remainder will continue in full force and effect. The
waiver by either party of any default or breach of this Agreement
will not waive any other or subsequent default or breach.
4 No Assignment. You may not assign, sell, transfer, delegate or
otherwise dispose of this Agreement or any rights or obligations
under it, whether voluntarily or involuntarily, by operation of law
or otherwise, without Pioneer DJ’s prior written consent. Any
purported assignment, transfer or delegation by You will be null
and void. Subject to the foregoing, this Agreement will be binding
upon and will inure to the benefit of the parties and their respective successors and assigns.
5 Entire Agreement. This Agreement constitutes the entire agree-
ment between the parties and supersedes all prior or contemporaneous agreements or representations, whether written or oral,
concerning its subject matter. This Agreement may not be modified or amended without Pioneer DJ’s prior and express written
consent, and no other act, document, usage or custom will be
deemed to amend or modify this Agreement.
6 You agree that this Agreement shall be governed and construed
by and under the laws of Japan.
Checking the latest information on the
driver software
For the latest information on the driver software, see the Pioneer DJ
support site below.
pioneerdj.com/support/
Before you start
En
5
Installing the audio driver software
Notes on installation
! Read Software end user license agreement carefully before installing
the driver software.
! The driver installer includes installation programs in the following 12
languages.
English, French, German, Italian, Dutch, Spanish, Portuguese,
Russian, Chinese (simplified characters), Chinese (traditional characters), Korean, Japanese.
! When using an operating system in languages other than the ones
listed above, select [English] for the installation procedure.
! The driver software is compatible with the following operating
systems.
Supported operating systems
Mac: macOS High Sierra 10.13/Sierra 10.12 (latest update), OS X
10.11 (latest update)
Windows: Windows
Windows
! Turn this unit off, then disconnect the USB cable connecting this
unit and the computer.
! Close all the applications running on the computer before installing
the software.
! If you connect this unit to your computer without installing the driver
software first, an error may occur on your computer depending on
the system environment.
®
®
10, Windows® 8.1,
7 (latest service pack)
32-bit version
64-bit version
Obtaining the driver software
1 Launch a web browser on a computer and access the
following Pioneer DJ site.
pioneerdj.com
2 Click [Support].
3 Click [Software & firmware updates].
4 Click [XDJ-RR] in the [ALL-IN-ONE DJ SYSTEM]
category.
5 Click [Drivers].
6 Click [Download link] and save the file.
Download either the driver software for Mac or Windows.
Installation (for Mac)
Do not connect this unit and the computer until the installation is
completed.
! To install or uninstall the driver software, you need to be authorized
by the administrator of your computer. Have the name and password
of the administrator of your computer ready in advance.
! Close all the applications running on the computer before installing
the software.
1 Unzip the driver software for Mac (XDJRRM###dmg.
zip) downloaded in Obtaining the driver software.
### indicates the driver software’s version.
2 Double-click the downloaded file
(XDJ-RR_M_#.#.#.dmg).
The contents of [XDJ-RR_M_#.#.#.dmg] are displayed.
“#.#.#” indicates the driver software’s version.
3 Double-click [XDJ-RRAudioDriver.pkg].
The driver software installation screen appears.
1
1
1
4 Read the information displayed on the screen and
click [Continue Anyway] to proceed.
5 When the end user license agreement appears,
select the language for the installation, read [Software
end user license agreement] carefully, and then click
[Continue Anyway].
You can select the desired language from multiple languages according
to the system environment of your computer.
6 Click [I agree] box if you consent to provisions of the
[Software end user license agreement].
If you do not consent to the provisions of the [Software end user
license agreement], click [Disagree] and stop installation.
7 Complete the installation by following the
instructions on the screen.
! To cancel the installation after it has started, click [Cancel].
Precautions when installing the driver
software on macOS High Sierra 10.13
A new security function was added to macOS High Sierra 10.13.
When installing Pioneer DJ driver software on macOS High Sierra 10.13,
the procedure below must be performed to authenticate the driver
software.
The operations described here are required when installing new driver
software on macOS High Sierra 10.13.
These operations are not required for driver software that was already
installed on macOS and OS X before they were upgraded to macOS
High Sierra 10.13.
1 Install Pioneer DJ driver software on macOS High
Sierra 10.13.
The following dialog box will appear during driver software installation.
2 Click [Security Setting].
The [Security & Privacy] dialog box is displayed.
3 Confirm that [System software from developer
“Pioneer DJ Corporation” was blocked from loading.] is
displayed at the bottom of the screen.
If it is not displayed, reinstall the driver software.
En
6
4 Click [Allow] at the bottom right of the screen.
5 When this unit is connected to a Mac, disconnect the
USB cable and then reconnect it again.
Installation (for Windows)
Do not connect this unit and the computer until the installation is
completed.
! To install or uninstall the driver software, you need to be authorized
by the administrator of your computer. Log on as the administrator of
your computer before proceeding with the installation.
! Close all the applications running on the computer before installing
the software.
1 Unzip the driver software for Windows
(XDJRR####exe.zip) downloaded in Obtaining the driver
software.
#### indicates the driver software’s version.
2 Double-click the downloaded driver software
(XDJ-RR_#.###.exe).
The driver software installation screen appears.
#.### indicates the driver software’s version.
3 When the language selection screen appears, select
the language for the installation and then click [OK].
You can select the desired language from multiple languages according
to the system environment of your computer.
4 Read the license agreement, select [Agree] if you
agree to the terms, and click [OK].
If you do not agree to the license agreement, click [Cancel] to cancel the
installation.
5 Complete the installation by following the
instructions on the screen.
If [Windows Security] appears on the screen while the installation is in
progress, click [Install this driver software anyway] to continue the
installation.
! When the installation is completed, a completion message appears.
Connecting this unit and a computer
For Windows 8.1
From [Apps view], click [Pioneer] > [XDJ-RR Setting Utility].
For Windows 7
Click [All Programs] > [Pioneer] > [XDJ-RR] > [XDJ-RR Setting
Utility] from the Windows [Start] menu.
Adjusting the buffer size (when ASIO is
used)
This function can only be used by those using a Windows operating
system.
This unit functions as an audio device conforming to the ASIO
standards.
! If an application using this unit as the default audio device (DJ soft-
ware, etc.) is running, quit the application before adjusting the buffer
size.
! Display the setting utility before starting.
% Click the [ASIO] tab.
! If the buffer size is made large, dropouts in the audio data (interrup-
tions in the sound), etc., tend to occur less, but the time lag due to
the transmission delay (latency) of the audio data may increase.
Before you start
1 Connect this unit to your computer using a USB cable.
2 Press the [u] switch.
This unit turns on.
! The message [Installing device driver software] may appear when
the unit is first connected to a Windows computer, or when the unit
is connected to a different USB port on the computer. Wait a while
until the message [Your devices are ready for use] appears.
Setting utility software
The setting utility can be used to perform the checks and settings
described below.
— Adjusting the buffer size (when ASIO is used)
— Checking the version of the driver software
Displaying the setting utility
For Mac
Click the [Macintosh HD] icon > [Applications] > [Pioneer] >
[XDJ-RR] > [XDJ-RR driver version display utility].
For Windows 10
Click [Pioneer] > [XDJ-RR Setting Utility] from the [Start] menu.
Checking the version of the driver
software
! Display the setting utility before starting.
% Click the [About] tab.
USB (LINK Export) connections
driver software for rekordbox (Mac/
Windows)
! Dedicated driver software is required for connecting the unit and
rekordbox (Mac/Windows) via USB (LINK Export).
! For the driver software, access the Pioneer DJ support site below and
download the software.
pioneerdj.com/support/
! For information on installing the driver software, see the Pioneer DJ
support site.
En
7
Connections
Front panel Rear panel
Headphone
To power outlet
! Connect the power cord to a power outlet after all the connections are completed.
! Turn off this unit and disconnect the power cord from the power outlet before connecting components or changing the connections.
! Refer to the operating instructions for the components to be connected.
! Be sure to use the supplied power cord.
! Connect this unit and the computer directly using the included USB cable.
Connecting to the input/output terminals
Rear panel, front panel
s
Power amplifier,
powered speakers,
etc.
R
Power amplifier,
powered speakers, etc.
L
Computer
DJ
software
L
R
Portable
audio device
DJ player
L
R
Microphone
1 53 42 768
1 PHONES terminals
Connect headphones.
Stereo phone plugs (ø 6.3 mm) and stereo mini phone plugs
(ø 3.5 mm) can be used.
! Do not use the two output terminals (one for a stereo phone
jack and one for a mini-phone jack) simultaneously. If a cable is
connected to or disconnected from one of the terminals while
another terminal is in use, the volume for the terminal in use may
increase or decrease unintentionally.
2 Kensington security slot
3 MASTER1 terminals
Connect to a power amplifier, powered speakers, etc.
Be sure to use these as balanced outputs.
! Be careful not to accidentally insert the power cord of
another unit.
! Do not connect a terminal that can supply phantom power.
4 MASTER2 terminals
Connect to a power amplifier, powered speakers, etc.
8 DC IN
Connect the AC adapter.
! Connect the power cord to a power outlet after all the connec-
tions are completed.
! Be sure to use the supplied power cord.
9 Cord hook
Hooking the AC adapter power cord onto the
cord hook
Fasten the AC adapter power cord into place by hooking it onto the cord
hook. This prevents the power cord from being accidentally pulled and
causing the plug to get disconnected from the terminal.
! Do not fasten with the base of the AC adapter power cord bent. If
used continuously under these conditions, the power cord may be
damaged, resulting in faulty contact.
! If the AC adapter is disconnected during playback, the sound will be
interrupted.
5 USB terminal
Connect to a computer.
! A USB hub cannot be used.
! Connect this unit and the computer directly using the included
USB cable.
! For connecting to XDJ-RR, be sure to use the USB cable supplied
with the unit for optimum performance.
6 AUX terminal
Connect a DJ player or a line level output component.
7 MIC terminal
Connect a microphone.
Power cord
(included)
AC adapter
(included)
9
En
8
Basic style
USB device on which
rekordbox data is recorded
Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer.
For rekordbox operations, see the rekordbox (Mac/Windows) user’s manual from the [Help] menu of rekordbox (Mac/Windows).
PRO DJ LINK (USB Export)
You can play music files prepared using rekordbox on this unit and also use the settings such as playlists, cues, loops and hot cues set by rekordbox.
Store music files and settings in a memory device (flash memory, hard disk, etc.) and connect it to this unit. Using PRO DJ LINK eliminates the need to
bring a computer into the DJ booth.
Connections
Computer
rekordbox
To power outlet
AC adapter
(included)
PRO DJ LINK (LINK Export)
! When a computer on which rekordbox is installed is taken into the DJ booth and connected to this unit using a USB cable, tracks in rekord-
box can be selected and played. You can use the information such as playlists, cues, loops and hot cues that have been set with rekordbox for
performances.
! When a mobile device on which rekordbox (iOS/Android) is installed is connected using a USB cable, tracks in rekordbox can be selected and
played. This makes it possible to use the information such as playlists, cues, loops and hot cues that have been set ahead of time with rekordbox for
performances.
! Use your own cable when connecting this product to an iPhone or iPod.
! The driver software needs to be installed before connecting a computer on which rekordbox (Mac/Windows) is installed via a USB (LINK Export)
connection. For details, see USB (LINK Export) connections driver software for rekordbox (Mac/Windows) on page 7 .
Supported iPhone and iPod
! Made for iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,
iPhone 5c, iPhone 5, iPod touch (5th and 6th generation).
! For the latest supported devices, see the following Pioneer DJ website.
pioneerdj.com/support/
To power outlet
AC adapter
(included)
rekordbox
Computer
Mobile device on which
rekordbox is installed
Part names and functions
En
9
Part names and functions
3 35
4
2
3
5
4
1
5
1
1 Power section (page 10 )
2 USB section (page 10 )
3 Deck section (page 11 )
4 Browse section (page 16 )
5 Mixer/effect section (page 23 )
Power section
1
1 u switch
Press to turn this unit on and off.
= Turning the power on (p. 26 )
USB section
1 USB1,2 Insertion slots
Connect USB devices.
= Connecting and disconnecting USB devices (p. 26 )
2 MASTER REC (WAKE UP) button
2
! MASTER REC: Records sound output from the unit on a USB
device connected to the USB2 slot.
= Recording the performance (p. 10 )
! WAKE UP: Cancels the auto standby mode.
= Auto standby function (p. 27 )
3 TRACK MARK button
Splits a track while the track is being recorded on the USB device.
= Splitting a track while recording (p. 11 )
4 USB1,2 STOP buttons
Press for over 2 seconds before disconnecting USB devices from
this unit.
= Connecting and disconnecting USB devices (p. 26 )
5 USB1,2 indicators
Lights up or flashes when this unit is communicating with the USB
device.
= Connecting and disconnecting USB devices (p. 26 )
Recording the performance
The same sound as the sound being output from the [MASTER] terminal
can be recorded as a WAV file on a USB device.
! The name of the files created when the sound is recorded is in the
format [REC***.WAV] (*** is a 3-digit number).
1 Connect the USB device to the USB2 slot.
2 Press the [MASTER REC (WAKE UP)] button.
Recording starts.
The [MASTER REC (WAKE UP)] button flashes.
! When the [MASTER REC (WAKE UP)] button is pressed again, the
lighting of the [MASTER REC (WAKE UP)] button turns off and
recording stops.
! Up to approximately 90 minutes recording is possible with 1 GB USB
memory.
10
En
Loading...