Pioneer U-05-S Technical data
U-05-S
USB DAC with Built-in Headphone Amplifier, Featuring SABRE32 Ultra DAC and
Asynchronous Transfer
D/A CONVERTER FEATURES
8ch Parallel Drive with SABRE ›
USB Input (PCM): 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,
›
192 kHz, 352.8 kHz, 384 kHz (16, 24, 32 bit)
USB Input (DSD): 2.8 MHz, 5.6 MHz
›
COAXIAL/OPTICAL/AES/EBU Input: 32 kHz, 44.1 kHz, 48 kHz, ›
88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (16, 24 bit)
Minimum Jitter with Asynchronous Trans fer
›
Digital Filter with 3 Modes (SHARP/SLOW/SHORT) ›
Lock Range Adjust Function for Reducing Jitter by Adjusting ›
Lock Range Accuracy
DIRECT Mode for Faithful Reproduction of Original Sound
›
Audio Scaler for up to 384 kHz/32-bit Upsampling ›
32
Ultra DAC (ES9016S x 2)
HEADPHONE AMPLIFIER FEATURES
Shielded Power Trans for mer wi th Ind epe nde nt Win din g, ›
Isolated Power and Digital/Analogue Blocks
Full Balance Circuit for Minimum Noise
›
Discreet Circuit Adopted for High-Quality Sound Tuning ›
Balanced Headphone Term ina l ( XLR 3/X LR4 ) x 2 Com pat ibl e w ith ›
Recabled Headphones, Unbalanced Headphone Terminal (STD) x 1
Fine Adjust Volume Control
›
Gain Switch for Using Headphones with Different Impedance ›
AUDIO PERFORMANCE AND VARIOUS
OTHER FEATURES
Digital Isolator for Reducing USB Block Noise ›
Highly Renowned NEUTRIK Balance Ter min als an d M ach ine d ›
RCA Terminals
High-Grade Parts Including Pioneer Custom Power Capacitor
›
Variable/Fix Volume Selectable Analogue Output (XLR3/RCA) for ›
Pre-Amp Function
Phase Switch Feature for Line Output
›
Low Centre of Gravity Design with Heavy and Robust Chassis ›
Screw-less Flat Design with Aluminium Front, Top, and Si de ›
Panels
Dedicated Remote for Volume and Tone Control
›
Front Display for Detailed Source Information ›
Auto Power Down ›
U-05-S
CONNECTIONS
REAR PANEL
USB DAC with Built-in Headphone Amplifier, Featuring SABRE32 Ultra DAC and
Asynchronous Transfer
U-05-S/SYXE8
FRONT TERMINALS
Phones Outputs: Unbalanced (STD) x 1, Balanced (XLR3) x 1, ›
Balanced (XLR4) x 1
Max Output: Unbalanced (STD): 180 mW + 180 mW (32 ohms),
•
Balanced (XLR3/XLR4): 300 mW + 300 mW (32 ohms)
Opt Load Impedance: 16 -600 ohms
•
Frequency Response: 4 Hz-80 kHz (-3.0 dB)•
THD + N (Output Power -3 dB): Unbalanced (STD) 0.01 %, •
Balanced (XLR3/XLR4) 0.004 %
S/N Ratio (A-Weight): Unbalanced (STD): 106 dB,
•
Balanced (XLR3/XLR4): 113 dB
REAR TERMINALS
Digital Inputs: USB (type B) x 1, Coaxial x 2, Optical x 2, ›
AES/EBU (XLR3) x 1
Analogue Outputs: Unbalanced (RCA) x 1, Balanced (XLR3) x 1
›
(with Output Level Fix/Variable Switch and Phase Switch)
Output Voltage/Impedance: Unbalanced (RCA) 2.4 V/100
•
ohms, Balanced (XLR3) 4.4 V/100 ohms
Frequency Response: 4 Hz-100 kHz (-3.0 dB)
•
THD + N: U nbalanc ed (R CA) 0.0 012 % , Balan ced ( XLR3) •
0.0007 %
S/N Ratio (A-weight): Unbalanced (RCA): 114 dB,
•
Balanced (XLR3): 117 dB
Dynamic Range: 16 bit: 96 dB, 24 bit, 32 bit: 118 dB
•
SPECIFICATIONS
Power Requirements: AC 220-230 V, 50/60 Hz ›
Power Consumption/Standby: 35 W/0.27 W ›
Dimensions (W x H x D): 296 x 101 x 271 mm ›
Weight: 6.3 kg ›
INTEGRATED TECHNOLOGIES
PIONEER and the Pioneer logo are registered trademarks of Pioneer Corporation.
System requirements: Windows XP/Windows Vista/Windows 7/Windows 8/Windows 8.1, Mac
OS X (10.7, 10.8, 10.9) for DSD.
Windows and the Windows logo are trademarks of the Microsoft group of companies.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
SABRE™ is a trademark of ESS Technology, Inc.
© 2014 Pioneer Home Electronics Corporation. All rights reserved.
Note: Specifications and design subject to change without notice.
Loading...