Pioneer TRAKTOR PRO 2 DDJ-T1 User Manual

DDJ-T1

DJ CONTROLLER

“TRAKTOR PRO 2”
Settings File Import Guide

2

Introduction

Pioneer provides a settings le exclusively for the Native Instrument's “TRAKTOR PRO 2” DJ software.
By using this le, the “TRAKTOR PRO 2” sample decks can be controlled with this unit.

• Decks C and D are assigned as the sample decks.

• The settings le does not cover all functions. The user must make other settings as necessary.

• For instructions on using the sample decks and making other settings, see the TRAKTOR 2 operation

manual (“Traktor 2 Application Reference English.pdf”).

• You must upgrade to “TRAKTOR PRO 2” (for a fee) before using the settings le.

• Those who do not plan to use the sample decks do not need to import this le.

3

Importing the Settings File

1 Download the Settings le from the Pioneer website:

http://pioneer.jp/support/download/dj/ddj-t1/

Since the download file is in the ZIP compressed format, extract the file before proceeding.
The file may automatically expand depending on your browser, in which case there will be no need for
you to expand it yourself.

• Windows users

Right click the download file and select [Extract All].
After the expansion wizard is displayed, specify the destination folder for the extracted files.

• Macintosh users

Double click the downloaded ZIP file to expand.

After the zip file is extracted, the file “PIONEER_DDJ-T1_V100.tsi” will be extracted.

2 At step 1, save the downloaded “PIONEER_DDJ-T1_V100.tsi” le in the desired location.

Example: Windows > My Documents¥Native Instruments¥Traktor 2.x.x¥Settings

Macintosh > ~/Documents/Native Instruments/Traktor 2.x.x/Settings

3 Open the Preferences window, then click the [Import] button.

Select the “PIONEER_DDJ-T1_V100.tsi” file saved in step 2.

* If there is already a different settings file, the new settings file may not operate properly.

Delete any other settings file before performing this procedure.
For instructions on deleting the settings file, see “Deleting Settings Files” on page 5.

4

4 Click the [OK] button.

The HID and MIDI mappings are loaded, and the GUI layout for this settings file is set simultaneously.
Use this settings file with sample decks C and D.

5 Open Controller Manager.

1 At [Device], select [Pro 2 Sample Deck 1 - Pioneer.DDJ-T1], and at [In-Port], select the device

corresponding to the DDJ-T1.

2 At [Device], select [Pro 2 Sample Deck 2 - Generic MIDI], and at [In-Port] and [Out-Port], select the

audio device corresponding to the DDJ-T1.

5

Deleting Settings Files

1 Open Controller Manager.

At [Device], select the setting to be deleted, then select [Delete] from [Edit...].

6

To Use Decks C and D as Track Decks

1 Using the procedure under “Deleting Settings Files” on page 5, delete the “Pro 2 Sample

Deck 1- Pioneer.DDJ-T1 (XXX_XXXXXXXX, XXX_XXXXXXXX)” and “Pro 2 Sample Deck 2­Generic MIDI (XXXXXX (XXXXXX),XXXXXX (XXXXXX))” sample deck control mappings.

2 Disconnect the DDJ-T1 from the PC/Mac, then reconnect it.

* Problems may arise with TRAKTOR PRO 2 control if the DDJ-T1 is reconnected while TRAKTOR PRO 2

is running.
It is recommended that you reconnect the DDJ-T1 using the following procedure:

1

Quit TRAKTOR PRO 2.

2

Disconnect the DDJ-T1 from the PC/Mac, then reconnect it.

3

Relaunch TRAKTOR PRO 2.

3 Click the letter for the deck whose assignment you want to change, then select [Track Deck].

7

Operating “TRAKTOR PRO 2” Using This
Unit's Buttons

The default settings are as follows:

CUE

PLAY/PAUSE

CUE

ONOFF

ADVANCED

ACTIVE

CHAINED

MINMAX

DRY/ WET

DECK

FILTER

A

C

FX1

FUNCTION

IN ADJUST OUT ADJUST

MOVE

IN

AUTO LOOP

KEY

LOCK

TEMPO
RANGE

OUT

NEEDLE SEARCH

MODE SIZE

BWD FWD

DELETE 1

REV

PHONES

FWD

TEMPO

0

SELECT/ BACK112233

MINMAX MINMAX MIN

LOWHI

MIN

VO

L

MAI

BROWSE

HEADPH

MCUE

MIX

MIN

VOL

MAX

5263748

MOVE GRID

SHIFT

GAIN

MINMAX

C

LOAD

C

FX

12

SYNCMASTER

EQ

HI

MINMAX

MID

MINMAX

LOW

MINMAX

OFF ON

GAIN

MINMAX

TREE

A

LOAD

A

FX

12

SYNC

10
9
8
7
6
5
4
3
2
1
0

MASTER

EQ

HI

MINMAX

MID

MINMAX

LOW

MINMAX

OFF ON

CH FADER

HOT CUE

CUE CUE

2
3

1

4
5

6

a

9

7

8

c

b

When Decks C and D are selected

DDJ-T1 button TRAKTOR PRO 2 function

4-slot simultaneous

operation

1

OUT (OUT ADJUST) button Slot Size x2

2

IN (IN ADJUST) button Slot Size /2

3

ACTIVE button Slot Size Reset

4

AUTO LOOP (MOVE GRID) control (turn) Slot Volume

5

AUTO LOOP (MOVE GRID) control (press) Slot Volume (Maximum)

SHIFT

+4

AUTO LOOP (MOVE GRID) control (turn) Slot Filter

SHIFT

+

5

AUTO LOOP (MOVE GRID) control (press) Slot Filter On/Off

6

Jog dial

Slot Scratch On
Slot Scratch
Slot Tempo Bend

7

SYNC button Slot Phase Sync

8

When [FUNCTION] is ON
NEEDLE SERACH pad

Group Play*

9

PLAY/PAUSE  button

Group Play

a

CUE button Group Trigger

Single slot

operation

b

When [FUNCTION] is ON
NEEDLE SERACH pad

Sample Play*

c

MOVE PANEL/HOT CUE PANEL
[1]/[5] button
[2]/[6] button
[3]/[7] button
[4]/[8] button

See “About HOT CUE Assignment” below.

* Even when decks A and B are selected, when the [FUNCTION] button is turned on, the sample decks can be operated using the [NEEDLE

SEARCH] pad.

About HOT CUE Assignment

Not Load Slot Load

HOT CUE Load from Deck Sample Play

SHIFT + HOT CUE Load from List Sample Trigger

MOVE/DELETE + HOT CUE Delete Slot

•For the various sampler functions, see the TRAKTOR 2 English manual (“Traktor 2 Application Reference
English.pdf”).

PIONEER CORPORATION

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan

PIONEER ELECTRONICS (USA) INC.

P. O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: [phone]

PIONEER ELECTRONICS OF CANADA, INC.

340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: [phone]

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: [phone]

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936 TEL: [phone]

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: [phone]

PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.

Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: [phone]

© 2011 PIONEER CORPORATION.

All rights reserved.

• TRAKTOR is the registered trademark of Native Instruments GmbH.

• Windows

®

, Windows 7, Windows Vista® and Windows XP are the registered trademarks and trademarks of

Microsoft Corporation registered in the United States of America and other countries.

• Mac OS is the trademark of Apple Inc. registered in the United States of America and other countries.

<DRI1026-A>