Pioneer T101 User Manual

Page 1
WSS.book Page 1 Friday, March 7, 2003 5:57 PM
Digital Wireless Speaker System
Ensemble d fil pour transmission numérique
enceintes sans
Digital Wireless Rear Speaker System
Ensemble d fil pour transmission numérique
enceintes arrière sans
XW-HTD630
Operating Instructions Mode d’emploi
Page 2
WSS.book Page 2 Friday, March 7, 2003 5:57 PM
IMPORTANT
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS — All the safety and
operating instructions should be read before the product is operated.
RETAIN INSTRUCTIONS — The safety and
operating instructions should be retained for future reference.
HEED WARNINGS — All warnings on the
product and in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS — All operating and
use instructions should be followed.
CLEANING — Unplug this product from the wall
outlet before cleaning. The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet.
ATTACHMENTS — Do not use attachments not
recommended by the product manufacturer as they may cause hazards.
WATER AND MOISTURE — Do not use this
product near water — for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
ACCESSORIES — Do not place this product on
an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
CART — A product and cart
combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
VENTILATION — Slots and openings in the
cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
POWER SOURCES — This product should be
operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
LOCATION – The appliance should be installed
in a stable location.
NONUSE PERIODS – The power cord of the
appliance should be unplugged from the outlet when left unused for a long period of time.
GROUNDING OR POLARIZATION
• If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
• If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
H002_En
Page 3
WSS.book Page 3 Friday, March 7, 2003 5:57 PM
POWER-CORD PROTECTION — Power-supply
cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
LIGHTNING — For added protection for this
product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
POWER LINES — An outside antenna system
should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
OVERLOADING — Do not overload wall outlets,
extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
OBJECT AND LIQUID ENTRY — Never push
objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
SERVICING — Do not attempt to service this
product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE — Unplug this
product from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
• If the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance — this indicates a need for service.
REPLACEMENT PARTS — When replacement
parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
SAFETY CHECK — Upon completion of any
service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
WALL OR CEILING MOUNTING — The product
should not be mounted to a wall or ceiling.
HEAT — The product should be situated away
from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
English
WARNING:
WATERPROOF. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND DO NOT PUT ANY WATER SOURCE NEAR THIS APPARATUS, SUCH AS VASES, FLOWER POTS, COSMETICS CONTAINERS, MEDICINE BOTTLES, ETC.
THIS APPARATUS IS NOT
[For U.S. model] IMPORTANT NOTICE
The serial number for this equipment is located on the rear case. Please write this serial number on your enclosed warranty card and keep it in a secure area. This is for your security.
H006A_En
WARNING:
Handling the cord on this product or cords associated with accessories sold with the product will expose you to lead, a chemical known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm.
Wash hands after handling
Page 4
WSS.book Page 4 Friday, March 7, 2003 5:57 PM
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/
TV technician for help.
H010_En
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
H011_En
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connec­tors for connections.
WARNING:
FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY. THE VOLTAGE OF THE AVAILABLE POWER SUPPLY DIFFERS ACCORDING TO COUNTRY OR REGION. BE SURE THAT THE POWER SUPPLY VOLTAGE OF THE AREA WHERE THIS UNIT WILL BE USED MEETS THE REQUIRED VOLTAGE (E.G., 230V OR 120V) WRITTEN ON THE REAR PANEL.
BEFORE PLUGGING IN THE UNIT
H012_En
H041A_En
[For Canadian model] CAUTION: TO PREVENT ELECTRIC SHOCK, DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.
H007A_2L
[For Canadian model]
This Class B digital apparatus complies with Canadian ICES-003.
[Pour le modèle Canadien]
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
H009_2L
Operating Environment
Operating environment temperature and humidity: +5ºC – +35ºC (+41ºF – +95ºF); less than 85%RH (cooling vents not blocked) Do not install in the following locations
÷ Location exposed to direct sunlight or strong
÷ artificial light
÷ Location exposed to high humidity, or poorly
ventilated location
H045_En
WARNING: NO NAKED FLAME SOURCES,
SUCH AS LIGHTED CANDLE, SHOULD BE PLACED ON THE APPARATUS. IF NAKED FLAME SOURCES ACCIDENTALLY FALL DOWN, FIRE SPREAD OVER THE APPARATUS THEN MAY CAUSE FIRE.
H044_En
VENTILATION:
When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 10 cm at top, 10 cm at rear, and 10 cm at each side).
WARNING: Slot and openings in the
cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, to prevent fire hazard, the openings should never be blocked and covered with items, such as newspapers, table-cloths, curtains, etc. Also do not put the apparatus on the thick carpet, bed, sofa, or fabric having a thick pile.
H040 En
Page 5
WSS.book Page 5 Friday, March 7, 2003 5:57 PM
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
Manufacturer: Pioneer Corporation
4-1, 1-chome, Meguro, Meguro-ku 153-8654 TOKYO, JAPAN
EU Representative’s: Pioneer Europe NV
Haven 1087, Keetberglaan 1, 9120 MELSELE, BELGIUM
English Hereby, Pioneer, declares that this Digital Wireless Speaker System XW-DV515 is in
compliance with the essential requirements and other relevant provisions of Directive 1999/ 5/EC.
Suomi Pioneer vakuuttaa täten että Digital Wireless Speaker System XW-DV515 tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Nederlands Hierbij verklaart Pioneer dat het toestel Digital Wireless Speaker System XW-DV515 in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Français Par la présente Pioneer déclare que l'appareil Digital Wireless Speaker System XW-DV515
est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Svenska Härmed intygar Pioneer att denna Digital Wireless Speaker System XW-DV515 står I
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Dansk Undertegnede Pioneer erklærer herved, at følgende udstyr Digital Wireless Speaker System
XW-DV515 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch Hiermit erklärt Pioneer, dass sich dieses Digital Wireless Speaker System XW-DV515
in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi)
Ellinika ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Pioneer ∆ΗΛΩΝΕΙ ΟΤΙ Digital Wireless Speaker System
XW-DV515 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/EK.
Italiano Con la presente Pioneer dichiara che questo Digital Wireless Speaker System XW-DV515 è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Español Por medio de la presente Pioneer declara que el Digital Wireless Speaker System XW-
DV515 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Português Pioneer declara que este Digital Wireless Speaker System XW-DV515 está conforme com os
requisitos essenciais e outras disposições da Directiva 1999/5/CE.
English
Page 6
WSS.book Page 6 Friday, March 7, 2003 5:57 PM
[For U.S. model]
Changes or modifications not expressly approved by the manufacturer (party responsible) for Compliance could not void the user’s authority to operate the equipment.
[For Canadian model]
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
[Pour le mod
L'utilisation de l'appareil est soumise aux deux conditions suivantes: (1) il ne provoque pas de brouillage, et (2) il peut supporter tous les brouillages, y compris ceux qui sont en mesure de provoquer une anomalie de fonc­tionnement de l'appareil.
èle Canadien
]
[For Canadian model]
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
[Pour le mod
Pour éviter le brouillage radioélectrique des émetteurs ayant une licence, cet appareil doit être utilisé à l'intérieur des habitations et loin des fenêtres de manière à assurer la protec­tion maximale. Un équipement (ou son antenne d'émission) lorsqu'il est installé à l'extérieur ne peut être utilisé qu'après obten­tion d'une licence.
èle Canadien
]
Power cord caution
Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cords. The power cord should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest Pioneer authorized service center or your dealer for a replacement.
Radio wave reflections
The radio waves received by the receiver include the wave coming directly from the transmitter (direct wave) and waves coming from various directions due to reflections by walls, furniture and building (reflected waves). The reflected waves due to obstacles and reflecting objects further produce a variety of reflected waves as well as variation in reception condition depending on locations. If the audio cannot be received properly due to this phenomenon, try moving the location of the wireless speaker a little. Also note that audio may be interrupted due to the reflected waves when a person crosses or approaches the space between the transmitter and wireless speaker.
We do not assume any liability for the damages incurred due to improper use of the product by the user or third party, malfunction during use, other troubles or use of the product, unless indemnity for damages is admitted by the law.
Page 7
WSS.book Page 7 Friday, March 7, 2003 5:57 PM
For safety in operation
Do not use the system in the proximity of electronic equipment that requires high­accuracy control or handling of very low-level signals.
• The system may affect the electronic equipment, causing malfunction or accident. Examples of such electronic equipment: Hearing aid, cardiac pacemaker, other electrical medical equipment, fire alarm, automatic door, and other automated control equipment. If you use a pacemaker or other electrical medical equipment, consult the manufacturer or dealer to check the effects of radio waves on it.
Do not use the system in places where its use is prohibited, for example near aircraft equipment and in hospitals.
• The system may affect electronic equipment or electrical medical equipment, causing an accident. Follow the instructions given by the aircraft company or medical institution.
Contents
English
01 Connecting Up
Rear panel . . . . . . . . . . . . . . . . . . . . . . . 8
Rear panel connections . . . . . . . . . . . . . . 9
02 Controls and Displays
Transmitter . . . . . . . . . . . . . . . . . . . . . . 10
Wireless speaker . . . . . . . . . . . . . . . . . . 10
03 Additional Information
Taking care of the unit . . . . . . . . . . . . . . 13
Troubleshooting. . . . . . . . . . . . . . . . . . . 15
Specifications . . . . . . . . . . . . . . . . . . . . 16
What’s in the box
Please confirm that the following accessories are in the box when you open it.
•Transmitter
• Wireless speaker
•AC adapter
• RCA stereo cord
• These operating instructions
• Warranty card
Page 8
WSS.book Page 8 Friday, March 7, 2003 5:57 PM
Connecting Up01
Chapter 1
Connecting Up
Rear panel
R
L
IN
WIRELESS
Wireless speaker
1 WIRELESS IN L/R jacks 2 AC power cable 3 DC IN inlet
Transmitter
31
2
8
En
Page 9
WSS.book Page 9 Friday, March 7, 2003 5:57 PM
Connecting Up 01
Rear panel connections
• When connecting, make sure that all components are switched off and unplugged.
English
1 WIRELESS IN L/R jacks
Connect the WIRELESS IN L/R jacks to the WIRELESS OUT L/R jacks on your XV-DV515 or XV-HTD630, using the supplied RCA stereo cord. Refer to the supplied operating instruc­tions for details.
R
IN
WIRELESS
To XV-DV515 or XV-HTD630
2 AC power cable
Plug the AC power cable into a power outlet.
3 DC IN inlet
Connect the supplied AC adapter to the DC IN inlet on the rear panel of the unit, then plug into a power outlet.
L
To power outlet
9
En
Page 10
WSS.book Page 10 Friday, March 7, 2003 5:57 PM
Controls and Displays02
Chapter 2
Controls and Displays
Transmitter
Wireless speaker
1
2
10
3
4
TUNED
POWER OFF
ON
SURROUND
4 6
5
CHANNEL
21 3
AUTO
WIRELESS
MODE
CHANNEL
AUTO ON/OFF
STEREO
7 9
CHANNEL
1 2 3 4
AUTO MANUAL
XW-DV-515
STEREO MODE
VOLUME
MIN MAX
8
VOLUME
XW-HTD630
MIN MAX
10
En
Page 11
WSS.book Page 11 Friday, March 7, 2003 5:57 PM
Controls and Displays 02
1 CHANNEL INDICATORS
Light to indicate the selected channel.
2 CHANNEL
The default setting is CH1. In case of poor reception due to interference from other electrical devices, you can improve reception by selecting another channel. Each time you press the button, the channel changes sequentially:
CH 1
Each of the 4 channels is allocated a frequency as follows:
CHANNEL 1 - 2.414GHz
CHANNEL 2 - 2.432GHz
CHANNEL 3 - 2.450GHz
CHANNEL 4 - 2.468GHz
• Poor reception may cause the audio to be interrupted or stopped. This is not malfunction. Try changing the location or orientation of the transmitter and/or the wireless speaker to improve reception.
3 Antenna
Transmits signals to the wireless speaker.
4POWER
Press to switch the unit on or off.
5TUNED
Lights when the signal from the transmitter is properly received.
CH 2 CH 3 CH 4
6 WIRELESS MODE
Slide to select either SURROUND or STEREO mode.
SURROUND - Sounds going to the surround left and right channels are heard through the wireless speakers.
STEREO - Any source playing through the main system is heard in stereo through the wireless speakers (multi-channel sources will be downmixed to stereo).
• Before switching to either mode, stop the DVD receiver.
• If the DVD receiver and wireless speaker modes do not match, the wireless speaker system may produce loud sound.
• When set to SURROUND, the STEREO MODE VOLUME control does not function.
7 CHANNEL button
• XW-DV515
The default setting is AUTO ON. Press and hold for more than 5 seconds to switch between AUTO ON and AUTO OFF.
The reception channel is temporarily locked when set to AUTO OFF. Switching to AUTO OFF may improve reception in some cases. When the POWER is turned off, the CHANNEL setting reverts to AUTO ON. Normally, use the AUTO ON setting.
• When AUTO ON is selected, the same channel as the transmitter is selected automatically.
English
11
En
Page 12
WSS.book Page 12 Friday, March 7, 2003 5:57 PM
Controls and Displays02
• XW-HTD630
The default setting is AUTO. Press and hold for more than 5 seconds to switch between AUTO and MANUAL. The reception channel is temporarily locked when set to MANUAL. Switching to MANUAL may improve reception in some cases. The CHANNEL changes as follows each time you press the CHANNEL (AUTO/ MANUAL) button:
CH 1
Press CHANNEL (AUTO/MANUAL) repeatedly until the same channel as the transmitter is selected.
When the POWER is turned off, the CHANNEL setting reverts to AUTO. Normally, use the AUTO setting.
•When AUTO is selected, the same channel as the transmitter is selected automatically.
•When MANUAL is selected, be sure to select the same channel as the transmitter. If a different channel is selected, the signal can not be received.
CH 2 CH 3 CH 4
8AUTO
Lights when AUTO (AUTO ON) mode is selected.
9 VOLUME (STEREO MODE VOLUME)
Turn to adjust the speaker volume when WIRELESS MODE is set to STEREO.
• When set to SURROUND, the volume control does not operate. The volume changes automatically.
10 Antenna
Receives signals from the transmitter.
• The wireless speaker can be used at distances of up to 10m from the transmitter. This range may change depending on the environment.
• Please refer to the provided manual before using XV-DV515 or XV-HTD630.
12
En
Page 13
WSS.book Page 13 Friday, March 7, 2003 5:57 PM
Additional Information 03
Chapter 3
Additional Information
Taking care of the unit
Cleaning the unit’s exterior
• Use a polishing cloth or dry cloth to wipe off dust and dirt. If the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth.
• Do not use furniture wax or cleaners. Never use thinners, benzine or insecticide sprays or other chemicals on or near this unit since they will corrode the surfaces.
• If you use a chemical-impregnated cleaning cloth, read the instructions carefully before use. These cloths may leave smear marks on half-mirror finish surfaces; if this happens, finish with a dry cloth.
• Unplug the unit when cleaning.
Problems with condensation
Condensation may form inside the unit if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won’t damage the unit, it may temporarily impair its performance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using.
Hints on installation
We want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it:
Do...
• Use in a well-ventilated room.
• Place on a solid, flat, level surface, such as a table, shelf or stereo rack.
• Be sure to switch the wireless speaker off when not in use.
Don’t...
• Use in a place exposed to high temperatures or humidity, including near radiators and other heat-generating appliances.
• Place on a window sill or other place where the unit will be exposed to direct sunlight.
• Use in an excessively dusty or damp environment.
• Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use.
• Use near a television or monitor as you may experience interference—especially if the television uses an indoor antenna.
• Use in a kitchen or other room where the unit may be exposed to smoke or steam.
• Use on a thick rug or carpet, or cover with cloth—this may prevent proper cooling of the unit.
• Place on an unstable surface, or one that is not large enough to support all four of the unit’s feet.
Moving the wireless speaker
If you need to move the wireless speaker, first press POWER on the front panel to turn the unit off. Unplug the power cord.
AC adapter and power cord caution
• Do not leave the power cord near heating equipment. The coating of the cord may melt, which could lead to fire and/or electrocution.
• Make sure to grasp the body of the AC adapter when removing it from the power outlet. If you pull the power cord, it may become damaged which could lead to fire and/or electrocution.
• Do not attempt to plug in or remove the AC adapter with wet hands. This may result in electrocution.
English
13
En
Page 14
WSS.book Page 14 Friday, March 7, 2003 5:57 PM
Additional Information03
• Insert the prongs of the AC adapter all the way into the power outlet. If the connection is incomplete, heat may be generated which could lead to fire. Furthermore, contact with the connected prongs of the adapter may result in electrocution.
• Do not insert the AC adapter into a power outlet where the connection remains loose despite inserting the prongs all the way into the outlet. Heat may be generated which could lead to fire. Consult with the retailer or an electrician regarding replacement of the power outlet.
Radio wave caution
To prevent noise or interrupted communication, do not use this system in the following locations:
• Locations exposed to the magnetic field, static electricity or radio wave interference from radio communication equipment using the same frequency band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device or microwave oven. (The radio wave may not reach in certain environments.)
• Locations near a radio. (This may cause noise interference.)
• If the transmitter is used near A/V equipment with an antenna input terminal, such as a TV, VCR, BS tuner or CS tuner, you may experience noise interference on a TV near the transmitter. In such cases, place the transmitter at a larger distance from the antenna input terminal of the A/V equipment.
Scope of operation
Use of this equipment is limited to home use. (Transmission distances may be reduced depending on communication environments.) In the following locations, poor condition or inability to receive radio waves may cause the audio to be interrupted or stopped:
• In reinforced concrete buildings or homes made of metallic structural members.
• Near large metallic furniture.
• In a crowd of people or near a building or obstacle.
• In a location exposed to the magnetic field, static electricity or radio wave interference from radio communication equipment using the same frequency band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device or microwave oven.
• If you live in a heavily populated residential area (apartment, townhouse, etc.) and if your neighbor’s microwave is placed near your system, you may experience radio wave interference or no sound from the speaker. If this occurs, move your unit to a different place. When the microwave is not in use, there will be no radio wave interference.
14
En
Page 15
WSS.book Page 15 Friday, March 7, 2003 5:57 PM
Additional Information 03
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work.
Symptom Cause & Remedy
Audio is interrupted. • This system uses high frequency radio waves that
Audio is suddenly interrupted. • There may be radio communication equipment
Audio cannot be received. • The radio wave reception is variable depending on
Horizontal stripe noise interference on a TV set near the transmitter.
Power shuts off when the switch is on or the system is in operation.
have properties similar to light, such as linearity, reflection, refraction, diffraction, and interference. Therefore, placement of the system can result in weak radio waves and/or interruption.
• The distance between the transmitter and
• Is the system being used in a location with favorable
• The transmitter and receiver are designed and sold
• Is there a piece of A/V equipment with an antenna
• The system is malfunctioning. Please contact the
may be too large. Use the wireless
speaker
within the reach of radio wave from the
speaker
transmitter.
condition for electrical noise generation?
using the same frequency band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device or microwave oven, operating nearby.
locations due to the effects of obstacles and reflecting objects. Try changing the location of the receiver a little.
as a pair, and they identify each other in communication. This means that communication is not available between separately purchased transmitter and receiver.
near the transmitter? If so, move the transmitter away from the antenna input terminal of the AV equipment.
nearest PIONEER authorized service center.
wireless
English
Caution
Static electricity or other external influence may cause malfunctioning of this unit. In this case, unplugging the power cord and then re-plugging it in will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest PIONEER service center.
15
En
Page 16
WSS.book Page 16 Friday, March 7, 2003 5:57 PM
Additional Information03
Specifications
General
Digital Wireless Speaker System (Transmitter/Wireless speaker)
Transmitter
AC adapter
Power requirements
. . AC 220-240V, 50/60Hz (European model)
AC 230V, 50/60Hz (U.K. model)
AC 120V, 60Hz (US model)
Power consumption
. . . . . . . . . . . . . 9W (European, U.K. model)
8W (US model)
Rated output. . . . . . . . . . . . . . . . 12V/300mA
Power consumption (without AC adapter)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2W
Input. . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.3kg
Dimensions. . . . . 166(W) x 56(H) x 112(D)mm
Wireless Speaker
Power requirements
. . . . AC 220-230V, 50/60Hz (European model)
AC 230V, 50/60Hz (U.K. model)
AC 120V, 60Hz (US model)
Power consumption
. . . . . . . . . . . . . . 52W (European, U.K. model)
57W (US model)
Amplifier characteristics
Maximum power output . . . . . . . . . 25W/ch
RMS (1kHz, THD10%, 4Ω)
Speaker unit . . . . . . . . . . . . 7cm cone type x 2
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.2kg
Dimensions. . . . 420(W) x 178(H) x 138(D)mm
Accessories
Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Wireless speaker . . . . . . . . . . . . . . . . . . . . . . . 1
AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
RCA stereo cord. . . . . . . . . . . . . . . . . . . . . . . . 1
These operating Instructions . . . . . . . . . . . . . 1
Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . 1
• The specifications and design of this product are subject to change without notice, due to improvement.
Published by Pioneer Corporation. Copyright © 2003 Pioneer Corporation. All rights reserved.
16
En
Page 17
WSS.book Page 17 Friday, March 7, 2003 5:57 PM
Page 18
FR_DV515.book Page 16 Friday, March 7, 2003 10:58 PM
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
<TEWWW/03C00001> Printed in / Imprimé au <ARC7475-A>
K
002
E
Loading...