50 watts per channel at 8 ohms; 60 watts per channel at 4 ohms.
Not exceeding 0.1% (Measuring range: 20Hz to 20,000Hz. Input type: AUX) Not exceeding 0.05%, (1 watt, 8 ohm, per channel).
No greater than 0.1%, (50Hz: 7,000Hz=4:1) ( A/B: AUX ). In no case should it exceed 0.05%, (1 watt, 8 ohm, per channel).
30 Limit T (20H to 20000H).
PHONO RIAA: (30Hz:15000Hz - 0.2dB 30% 2) sh. Other: 10Hz-50Khz
+8, -7 100 Hz (dB), +9, -7 10 kHz (dB).
PAGING: 70dB AUX, TAPE MOVIE: PLAY: 90dB
Usable sensitivity: MONO, 10.7dBf (1.9 old uV) stereo detection: <5.19.0dBf (9.8 uV). Signal to noise ratio: 65dBf: MONO, 72dB (51.1n); STEREO, 67dB (51.1n).
Sensitivity: Ferrite antenna: 300uV/m.
120V, 60Hz
160W (UL) Max 350W
Size 480×149×371 (mm) 18-7/8(W)×5-7/8(H)×14-5/8(D) inches
Q: What is the continuous power output of the SX-750?
A: The Sx750 continuous Power output is 50watts per channel at 8 ohms and 60watts per channel at 4 ohms.
Q: What is the total harmonic distortion for this model?
A: The distortion in this model is non-existing . Less than 0.1% at rated power and less than 0.05% in specified channel output which is 1 watt.
Q: What are the input options that are enabled in the SX-750?
A: Inputs available on the SX-750 include PHONO, AUX, TAPE and others.
Q: Is it possible to connect headphones to the SX-750?
A: There is a headphone jack present, the speakers must be switched off while using the headphones as well.
Q: What is the gross weight of the SX-750 minus the package?
A: The gross weight without a package is equal to 13.7 kilograms which is the equivalent to 30 lbs 2 ozs.