Pioneer SX-727-KUW, FVZW, FW User Manual
Specifications and Main Features
- Model: SX-727
- Versions: KUW (Available in 120V only), FVZW (Includes five-position rotary switch and certificate of approval from FTZ), FW (Five position switch for various applications)
- Semiconductors: Transistrs – 4, Integrated circuits – 4, Diodes – 37
- Music Power Output (IHF): IHF Rating of 195 Watts (402) and 422 Watts (802)
- Continuous Power Output (1kHz: each channel driven): 69W / 69W για 4Ω, 48W / 48W για 8Ω.
- Continuous Power Output (1kHz: both channels driven): 50W + 50W for 4Ω and 40W + 40W for 8Ω.
- Power Output in the Range of 20Hz to 20kHz (both channels driven): 37W + 37W output at 8Ω.
- Total unit Harmonic Distortion: Unit distortion of over 0.5% (Continuous power output) and below 0.03% (during power output of 24W over a 24W period)
- Total unit Intermodulation Distortion: Unit distortion of over 0.5% (Continuous power output) during power output of 24W over a 24W period
- Power Bandwidth(IHF) : From 10Hz-60KHz(8Ω,Harmonic Distortion <.5%).
- Frequency Response: 7Hz to 80KHz, +/- 1dB.
- Input Sensitivity / Impedance (1KHz, Continuous power output): 500mV / 50K ohm.
- Speakers: Support for 4 to 16Ω Speakers
- Damping Factor: Damping factor of 40 (8 ohm at 1kHz)
- Preamplifier Output Voltage: A rated output of 500mV, with 700mV as the maximum output.
- Preamplifier Harmonic Distortion: The preamplifier harmonoic Distortion will not exceed 0.1%
- Preamplifier Frequency Response: Capable of 10 to 20k founded Utilised +/- 7db amplifiers, rated amplifiers.
- For other input requirements: Input Sensitivity/Impedance adapted to suit atugging.
- PHONO1 (MAG): Has rated of 3mV at 50K Ohm and a maximum of 50K Ohm.
- PHONO 2 (MAG): -3 sul'os / kΩ 50.
- MIC: -256 sul'os / kΩ 50.
- AUX: -200 sul'os / kΩ 100.
- TAPE MONITOR 1, 2: -200 sul'os / kΩ 100.
- TAPE REC 1, 2 (pin jack): -200 sul'os.
- TAPE REC (DIN connector): -35 sul'os.
- Beledanfiltered Force:
- Low Filter: -10dB at 100Hz +10dB kHz.
- High Filter: -10dB at 10kHz +10dB kHz
- Equalization: RIAA s.t.d.
- Loudness Contour: +10dB at 100Hz, +6dB at 10kHz
- Muting Level: -20dB
- Hum and Noise (IHF):
- PHONO: Not less than 85dB
- AUX: Not less than 95dB
- FM Tuner Section Frequency Range: 88 MHz to 108 MHz
- Usable Sensitivity (THF): 1.8nV
- Signal-to-Noise Ratio: Not less than 85 dB
- Frequency Response: 7 Hz – 80 KHz +/- 1dB
- Power Requirements: 120V-60Hz and can be changed to 100V, 130V, 220V, 240V
- Power Consumption: 270 W ( max.)
- Dimensions:
- Width: 19-1/8 inches (485mm)
- Depth: 15-3/8 inches (390mm)
- Weight:
- Without package: 30 lbs (13.6 kg)
- With package: 37 lbs (17 kg)
- Furnished Parts: FM t-type Antenna, Pin Plug and Speaker Plug
Frequently Asked Questions
Q: What are the power output specifications for the SX-727?
A: The Music Power Output is 195 Watts (402) and 422 Watts (802). Continuous Power Output is 69W/69W (4Ω) and 48W/48W (8Ω) for each channel driven.
Q: Is the voltage requirement for this unit is switchable.
A: Yes, it is switchable to 100V, 120V, 130V, 220V and 240V.
Q: How do you describe the frequency response of the fpga?
A: The frequency response is from 7Hz to 80kHz with a tolerance of +1dB.
Q: What is the maximum number of speakers than can be attached to the SX-727?
A: The range of impedance that the device is capable of handling goes from 4 to 16Ω to cater to multiple speakers.
Q: Which type of Noise filters are used by the SX-727?
A: The device uses Low and High filters in order to reduce noise and enhance audio output.
Q: Can you mention the dimensions and weight of the SX-727?
A: The SX-727 has a width of 19-1/8 inches (485mm) and a depth of 15-3/8 inches (390mm). The packaged weight is 30 lbs (13.6 kg).
User Manual
Loading...