Pioneer SX-636 User Manual
Specifications and Main Features
- Model: SX-636
- Voltage Types:
- KCU: Rated at 120 V only, certified by UL and CSA.
- GN: Voltage rating - Only at 220V, Approved by SEMCO (Sweden), DEMCO (Denmark) and NEMCO(Norway).
- FV: Rated at 110V, 120 V, 130V, 220V and 240 V, Standard export model with voltage selection.
- Amplifier Section:
- - Continuous Power Output:
- - - 20Hz~20kHz 25W + 25W(8Ω) 27W + 27W(4Ω), 1kHz 27W + 27W(8Ω), 30W + 30W(4Ω) -
- - Harmonic Distortion: Under 0.5% (for continuous power output), Under 0.07% (for 1W + 1W)-
- - Intermodulation Distortion: Under 0.5% (for continuous power output), Under 0.07% (for 1W + 1W
- - Power Bandwidth: T.H.D. 0.5% 5Hz - 60kHz:
- - - Output Impedance: A, B, A + B (4 ~ 16 ohm), Headphone (4 ~ 16 ohm) Damping Factor: 35 Over at \(1kH,8 Omega\)
- - - Here, 35 stands for Dost performance under appropriate conditions
- - Residual Hum & Noise:: 0.5 mV under
- Input Sensitivity/Impedance:PHONO:
- - PHONO Overload Level (rms/p-p): 110mV/310mV 2.5mV/50kΩ
- - TAPE PB: 150mV/60kΩ AUX: 150mV / 60kΩ
- FM Section:
- - Usable Sensitivity: Less than 0.2uV
- - Signal-to-Noise Ratio: More than 70 dB
- - Stereo Separation: more than 40 dB 1KHz
- - Frequency Response: 50Hz ~ 10kHz 20Hz ~ 20kHz ±3db
- AM Section:
- - Sensitivity: 300μV IHF Ferrite antenna
- - Signal-to-Noise Ratio: More than 50dB
- Power Requirements:
- - AC 120V 60Hz 220V 50/60Hz 110v, 120, 130, 220V 240V switchable 50/60Hz
- Power Consumption:
- - 140W UL approved model only
- Dimensions:
- 480 (W) x 147 (H) x 405 (D) mm
- Weight: Without Package- 11.2 Kg and With Package- 13.0 Kg (only 5 line voltage model }
Frequently Asked Questions
Q1: What is the power output of the SX-636?
A1: The continuous power output falls between the ranges of 20Hz ~ 20khz and is recorded as 25W + 25W at 8Ω and 27W + 27W at 4Ω.
Q2: Does the SX-636 accept different voltage inputs ?
A2: For sure. It is compatible with multiple voltages such as 120V specifically for KCU, 220V strictly for GN, and a switchable voltage model FV which covers the range for 110V, 120V, 130V, 220V, and 240V.
Q3: What is the amplitude modulation specification?
A3: When voltage output is unsustainably high, the harmonics output becomes 0.5 % and at 1W + 1W it virtually becomes negligible at a perfect 0.07%.
Q4: What is the size and weight of SX-636?
A4: It has an asymmetrical shape measuring various dimensions: 480 (W) x 147 (H) x 405 (D) mm and its weight is rounded at 11.2 kg without the package.
Q5: How does the split speaker system work?
A5: Connect a single or dual speaker system (A + B) to this unit with an 8 ohm - 16 ohm impedance compatible receiver.
User Manual
Loading...