
SPEAKER SYSTEM
S-L9-LRW XE
S-L9-A-LRW XE
This product is component of system.
ORDER NO.
RRV2176
Component
STEREO CD RECIEVER
SPEAKER SYSTEM
SATELLITE
SUBWOOFER
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
[ S-L9-W,S-L9-A-W ]( Subwoofer ) [ S-L9-LR,S-L9-A-LR ] ( Satellite Speaker )
The speaker element is attached to the back board by 4 external
screws. To detach it, unfasten those screws. When attaching it,
face its terminal upward.
The duct is attached to the baffle by press-fitting. To detach it,
pry it open by inserting a flat blade screwdriver into lower side.
The input terminal is attached to the back board by press-fitting. To detach it, pry it open by inserting a flat blade screwdriver into lower side.
NS-9
XC-L77
S-L9-LRW
S-L9-LR
S-L9-W
System
NS-9-A
XC-L77
S-L9-A-LRW
S-L9-A-LR
S-L9-A-W
Service Manual
RRV2187
RRV2176
The grille is attached to the cabinet by catches.
To detach it, pull it toword you.
The speaker element is attached to the inner baffle by 2 internal
screws. To detach it, first remove the cabinet. Then unfasten
those screws. When attaching it, face its terminal lower left.
The cabinet is attached to the baffle by 7 external screws.
To detach it, unfasten those screws.
The input terminal is attached to the cabinet by 2 internal
screws. To detach it, first remove the cabinet.
Then remove the input terminal.
Remarks
This service manual
(2 pieces)
(1 piece)
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 1999
T-ZZM AUG. 1999 Printed in Japan

S-L9-LRW, S-L9-A-LRW
PARTS LIST
NOTES:
Mark No. Description Part No.
NSP Speaker System (Satellite) S-L9-LR/XE
NSP Speaker System (Sub Woofer) S-L9-W/XE
NSP Speaker System (Satellite) S-L9-A-LR/XE
NSP Speaker System (Sub Woofer) S-L9-A-W/XE
For Packing
NSP Screw ASSY FREA-011
NSP Polyethylene Bag SHL1193
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
for S-L9-LRW
for S-L9-A-LRW
Speaker Cord ( for Sub Woofer ) FRDF-017
Speaker Cord ( for Satellite ) FRDD-042
Screw BPZ40P120FZK
For S-L9-LR and S-L9-A-LR
Mark No. Description Part No.
Grille (Gray) FRMG-172
NSP Badge 24 FRAM-044
NSP Grille Cloth FRAS-099
NSP Grille Frame FRNK-360
NSP Baffle Board (for S-L9-LR) FRGK-026
NSP Baffle Board (for S-L9-A-LR) FRGK-027
NSP Cabinet FRNK-358
NSP Inner Baffle FRNK-359
NSP Label Back (for S-L9-LR) FRAN-291
NSP Label Back (for S-L9-A-LR) FRAN-297
Connect Cord FRDF-018
NSP Acoustic Absorbent FRMV-039
Speaker B70AC45-58F
Non-Skid Pad FREC-024
NSP Badge 24 FRAM-044
NSP Grille Cloth FRAS-106
NSP Grille Frame FRNK-360
Grille (Blue) FRMG-178
Stand FRNK-361
Top Protector FRHA-171
Bottom Protector FRHA-173
Middle Protector FRHA-172
Protection Sheet (for Satellite) FRHC-047
Protection Sheet (for Sub Woofer) FRHC-048
Packing Case (for S-L9-LRW) FRHG-275
Packing Case (for S-L9-A-LRW) FRHG-262
SCHEMATIC DIAGRAM
Connect Cord (FRDF-024) Connect Cord (FRDF-018)
WHITE
BLACK
BLUE
For S-L9-W and S-L9-A-W
Mark No. Description Part No.
NSP Cabinet ( for S-L9-W ) FRMM-194
NSP Cabinet ( for S-L9-A-W ) FRMM-195
NSP Label Back ( for S-L9-W ) FRAN-290
NSP Label Back ( for S-L9-A-W ) FRAN-296
NSP Acoustic Absorbent ( for Bottom) FRMV-030
NSP Acoustic Absorbent ( for Back ) FRMV-036
NSP Acoustic Absorbent ( for Top ) FRMV-037
NSP Duct FRNK-354
Woofer 1
Screw ( for Input Terminal ) PPZ30P080FMC
Screw ( Grill-Cabinet, Cabinet-Baffle ) PPZ40P120FZK
Screw ( Cabinet-Baffle ) PYC40P160FZK
Connect Cord FRDF-024
Input Terminal FRKX-013
Speaker T10EU70-51F
Screw ( for Speaker ) BYC40P200FZB
Full-Range
BLUE
INPUT
BLACK
BLACK
BLACK
2
Woofer 2
Red
INPUT
WHITE
BLUE