SPEAKER SYSTEM
S-L8-LRW XE
This product is component of system.
ORDER NO.
RRV2178
Component
STEREO CD RECIEVER
SPEAKER SYSTEM
SATELLITE
SUBWOOFER
System
NS-8
XC-L77
S-L8-LRW
S-L8-LR
S-L8-W
Service Manual
RRV2187
RRV2178
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
[ S-L8-W ]( Subwoofer ) [ S-L8-LR ] ( Satellite Speaker )
The speaker element is attached to the back board by 4 external
screws. To detach it, unfasten those screws. When attaching it,
face its terminal upward.
The duct is attached to the baffle by press-fitting. To detach it,
pry it open by inserting a flat blade screwdriver into lower side.
The input terminal is attached to the back board by press-fitting. To detach it, pry it open by inserting a flat blade screwdriver into lower side.
The grille is attached to the cabinet by 4 external screws.
To detach it, unfasten those screws.
The speaker element is attached to the cabinet by 2 internal
screws. To detach it, first remove the cabinet. Then unfasten
those screws. When attaching it, face its terminal upper left.
The cabinet is attached to the baffle by 4 external screws.
To detach it, unfasten those screws.
The input terminal is attached to the cabinet by 2 internal
screws. To detach it, first remove the cabinet.
Then remove the input terminal.
Remarks
This service manual
(2 pieces)
(1 pieces)
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 1999
T-ZZM AUG. 1999 Printed in Japan
S-L8-LRW
PARTS LIST
NOTES:
Mark No. Description Part No.
NSP Speaker System S-L8-LR/XE
NSP Speaker System S-L8-W/XE
For Packing
NSP Screw ASSY FREA-011
NSP Polyethylene Bag SHL1193
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Speaker Cord ( for Sub Woofer ) FRDF-017
Speaker Cord ( for Satellite ) FRDD-042
Screw BPZ40P120FZK
Non-Skid Pad FREC-021
Stand FRNK-361
Top Protector FRHA-171
Bottom Protector FRHA-173
Middle Protector FRHA-174
Protection Sheet ( for Sub Woofer ) FRHC-048
Protection Sheet ( for Satellite ) FRHC-047
Packing Case FRHG-258
For S-L8-LR
Mark No. Description Part No.
Grille FRMG-173
NSP Badge 36 FRAM-043
NSP Grille Cloth FRAS-101
NSP Grille Frame FRNK-357
NSP Cabinet FRNK-355
NSP Inner Baffle FRNK-356
NSP Label Back FRAN-292
Connect Cord FRDF-018
NSP Acoustic Absorbent FRMV-039
Speaker B70AC45-58F
Screw ( for Input Terminal ) PPZ30P080FMC
Screw ( Grill-Cabinet, Cabinet-Baffle ) PPZ40P120FZK
For S-L8-W
Mark No. Description Part No.
NSP Cabinet FRMM-193
NSP Label Back FRAN-298
Connect Cord FRDF-024
Input Terminal FRKX-013
NSP Acoustic Absorbent ( for Bottom) FRMV-030
SCHEMATIC DIAGRAM
Connect Cord (FRDF-024) Connect Cord (FRDF-018)
WHITE
BLACK
INPUT
BLACK
BLACK
BLUE
NSP Acoustic Absorbent ( for Back ) FRMV-036
NSP Acoustic Absorbent ( for Top ) FRMV-037
NSP Duct FRNK-354
Woofer 1
Speaker T10EU70-51F
Screw ( for Speaker ) BYC40P200FZB
Full-Range
BLUE
INPUT
WHITE
BLUE
BLACK
Woofer 2
Red
2