Pioneer SL-11-QLRW Service manual
SATELLITE SUBWOOFER
ORDER NO.
RRV2484
SPEAKER SYSTEM
S-L11-Q-LRW
XJI/EW
This product is component of system.
Component System Service Manual Remarks
COMPACT MINI COMPONENT
SEREO CD TUNER XC-L11 RRV2470
STEREO POWER AMPLIFIER M-L11 RRV2479
SPEAKER SYSTEM S-L11-Q-LRW RRV2484 This service manual
65S
This service manual is intended for qualified service technicians; it is not meant
for the casual do-it-yourselfer. Qualified technicians have the necessary test
equipment and tools, and have been trained to properly and safely repair complex
products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability
of the product and may void the warranty. If you are not qualified to perform the
repair of this product properly and safely, you should not risk trying to do so and
refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals
which are known to the state of California to cause cancer, birth defects or other
reproductive harm.
Health & Safety Code Section 25249.6 – Proposition 65
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
(Satellite)
The grille is attached to the cabinet by 4 external screws.
To detatch it ,unfasten those screws.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
c
PIONEER CORPORATION 2001
The speaker element is attatched to the baffle by 4 internal
screws. To detach it, first remove the cabinet . Then remove the
speaker element by unfastening those screws. When attatching
it, face its terminal upward.
(Subwoofer)
The cosmetic baffle is attached to the baffle by press-fitting.
To detatch it , pry it open by inserting a flat blade screwdriver
into lower side.
To attach the cosmetic baffle, replace it on the backboard correctly by press-fitting.
The input terminal is attached to the backboard by press-fitting.
To detatch it , pry it open by inserting a flat blade screwdriver
into lower side.
To attach the input terminal, replace it on the backboard correctly by press-fitting. (The red terminal is right side.)
The woofer is attatched to the backboard by 4 external screws.
To detach it, unfasten those screws. When attatching it, face its
terminal downward.
T – ZZV JUNE 2001 Printed in Japan
S-L11-Q-LRW
PARTS LIST
NOTES:
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
PARTS LIST
Mark No. Description Part No.
NSP Satellite Speaker SMW1661
NSP Subwoofer SMW1662
For Packing
NSP Accessary Set SEA1561
Speaker Wire (for Subwoofer) SDF1091
Speaker Wire (for Satellite) SDS1065
Non Skid Pad SEC1537
Stand SET1041
NSP Polyethylene Bag SHL1223
Top Protector SHA2310
Middle Protector SHA2311
Bottom Protector SHA2312
Packing Case SHG2338
NSP Polyethylene Bag (for Subwoofer) SHL1212
Polyethylene Bag S2 (for Satellite) SHL1291
Satellite Speaker
PARTS LIST
Mark No. Description Part No.
Speaker D87DU61-53F
Screw (for Speaker) BPZ40P060FZK
Screw (for Cabinet) BPZ40P120FZK
Screw (for Sidewood) BYC35P160FNI
Fin-Lok M5
Speaker Cord SDD1303
Packing (for Cabinet) SEC1532
NSP Packing (for Cabinet) SNK2541
Damper (for Cabinet, Grille) SEP1237
Input Terminal KKX1015
Grille SMG1723
NSP Badge23 SAM1487
NSP Grille Cloth SAS1497
NSP Grille Frame SMH1030
NSP Sidewood R SMS1440
NSP Sidewood L SMS1441
NSP Acoustic Absorbent SMV2090
(for upper back side)
NSP Acoustic Absorbent SMV2091
(for lower back side)
NSP Cabinet SNK2536
NSP Stamped Model Label SME3150
(for Stand attaching)
SBN1049
SCHEMATIC DIAGRAM
Satellite
Speaker Cord (SDD1303)
RED
INPUT
WHITE
Subwoofer
Speaker Cord (SDD1304)
RED
INPUT
BLACK
Full-Range
Woofer
NSP Label Back SAN2942
Sub Woofer
PARTS LIST
Mark No. Description Part No.
Speaker A14ER75-52C
Screw (for Speaker) BYC40P160FZB
Speaker Cord SDD1304
NSP Packing (for Cosmetic Baffle) SEC1567
NSP Paper Tube 50 SMR1340
Input Terminal KKX1014
Non Skid Pads SEC1534
NSP Acoustic Absorbent SMV1955
(for bottom side)
NSP Acoustic Absorbent SMV2003
(for upper front side)
NSP Cabinet SMM1941
NSP Cosmetic Baffle SNK2532
NSP Stamped Model Label SME3152
NSP Label Back SAN2944
2
Loading...