Pioneer KEH-P7900R User Manual

Multi-CD/DAB control High power cassette player with RDS tuner

Reproductor de cassette de alta potencia con control de múltiples CD/DAB con sintonizador RDS

Operation Manual

KEH-P7900R

Manual de Operación

ENGLISH

ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Contents

Key Finder .................................................... 3

Head Unit

Steering Remote Controller (CD-SR77)

Before Using This Product ...................... 4

About This Product .......................................... 4

About This Manual ............................................ 4

About the Demo Mode ...................................... 4

Reverse Demo

Feature Demo

Precaution .......................................................... 5

In Case of Trouble ............................................ 5

When using the 50-Disc Type

Multi-CD Player ........................................ 5

Basic Operation ........................................ 6

To Listen to Music ............................................ 6

Basic Operation of Tuner .................................. 8

Manual and Seek Tuning

Preset Tuning

Band

Basic Operation of Cassette Player .................. 9

Open

Direction Change

Fast Forward/Rewind and Music Search

Cassette Loading Slot

Eject

Basic Operation of Multi-CD Player .............. 11

Track Search and Fast Forward/Reverse

Disc Search

Disc Number Search

(for 6-Disc, 12-Disc types) Corresponding Display Indications and

Buttons .................................................... 12

Entering the Function Menu ............................ 12

Function Menu Functions ................................ 13

Entering the Detailed Setting Menu ................ 14

Detailed Setting Menu Functions .................... 15

Tuner Operation ...................................... 16

Local Seek Tuning (LOCAL)

Best Stations Memory (BSM)

Using RDS Functions .............................. 17

What is RDS? .................................................. 17

Program Service Name Display ...................... 17

AF Function (AF) ............................................ 18

Activating/Deactivating the AF Function

PI Seek Function ............................................ 19

PI Seek

Auto PI Seek (for preset station)

Regional Function (REG) ................................ 19

Activating/Deactivating the REG Function

TA Function (TA) .......................................... 20

Activating/Deactivating the TA Function

Canceling Traffic Announcements

Adjusting the TA Volume

TP Alarm Function

PTY Function .................................................. 22

Searching the PTY

News Program Interruption Setting (NEWS)

PTY Alarm

Canceling Announcements

PTY List

Radio Text ...................................................... 25

Radio Text Display

Storing Radio Text in Memory

Recalling Preset Radio Text

Using the Cassette Player ...................... 27

Repeat Play (RPT)

Blank Skip (B.S)

Radio Intercept (R.INT)

Dolby B NR (B NR)

Using Multi-CD Players .......................... 29

Repeat Play (PMODE)

Random Play (RDM)

Scan Play (SCAN)

Pause (PAUSE)

ITS (Instant Track Selection) .......................... 31

ITS Programming (ITS)

ITS Play (ITS-P)

Erase a Track Program

Erase a Disc Program

Disc Title ........................................................ 33

Disc Title Input (TITLE)

Selecting Discs by Disc Title List (T.LIST)

Displaying Disc Title

Compression and DBE (COMP) .................... 35

COMP/DBE ON/OFF Switching

CD TEXT Function (for CD TEXT

compatible type) ...................................... 36

Title Display Switching

Title Scroll

Audio Adjustment .................................... 37

Selecting the Equalizer Curve ........................ 37

Entering the Audio Menu ................................ 37

Audio Menu Functions .................................... 38

Balance Adjustment (Fad)

Equalizer Curve Adjustment (EQ-Low/Mid/High)

Equalizer Curve Fine Adjustment

Loudness Adjustment (Loud)

Subwoofer Output (Sub-W1)

Subwoofer Setting Adjustment (Sub-W2)

Non Fading Output (NonFad)

Non Fading Output Level Adjustment (NonFad)

High Pass Filter (HPF)

Front Image Enhancer Function (FIE)

Source Level Adjustment (SLA)

Automatic Sound Levelizer (ASL) Function

Detaching and Replacing the

Front Panel .......................................... 45

Theft Protection .............................................. 45

Detaching the Front Panel

Replacing the Front Panel

Warning Tone

Initial Setting ............................................ 46

Entering the Initial Setting Menu .................... 46

Initial Setting Menu Functions ........................ 47

Changing the FM Tuning Step (FM)

Setting the DAB Priority Function (DAB)

Switching the Auto PI Seek (A-PI)

Setting the Warning Tone (WARN)

Switching the AUX Mode (AUX)

Setting the Dimmer (DIM)

Selecting the Brightness (BRIGHT)

Selecting the Illumination Color (ILL)

Setting the Rear Speaker Lead and Subwoofer Controller (SW)

Switching the Muting or Handsfree Telephoning (TEL 1)

Switching the Telephone Standby (TEL 2)

Switching the Motion Screen (DISP)

Other Functions ........................................ 53

Switching the Entertainment Display .............. 53

Using the AUX Source .................................... 53

Selecting the AUX Source

AUX Title Input (TITLE)

Using the Telephone Muting and Handsfree

Telephoning Function .............................. 54

Telephone Muting Function

Handsfree Telephoning Function

When using the DAB

(Digital Audio Broadcasting) Tuner ........ 55

About This Product’s Indications

Operation

Cassette Player and Care ...................... 57

Precaution ........................................................ 57

About the Cassette Player

About Cassette Tapes

Cleaning the Head .......................................... 57

Specifications .......................................... 58

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Key Finder

Head Unit

Steering Remote Controller (CD-SR77)

The steering remote controller (CD-SR77) enabling remote control of the head unit is sold separately. Operation is the same as when using buttons on the head unit.

DISPLAY button

FUNCTION button

VOLUME

Buttons 1-6

AUDIO button

TA button

SOURCE/OFF button

EQ selector

PTY button

TEXT button

OPEN button

ENTERTAINMENT button

BAND button

5/∞/2/3 button

FUNCTION button

2/3 button

SOURCE/OFF button

5/∞ button

AUDIO button

+/– button Raise or lower the volume.

BAND button

ATT button This lets you quickly lower volume level (by about 90%). Press once more to return to the original volume level.

Before Using This Product

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

About This Product

The tuner frequencies on this product are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals.

About This Manual

This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. It is especially important that you read and observe the “Precaution” on the next page and in other sections. This manual explains head unit operation. You can perform the same operations with the steering remote controller (CD-SR77). The steering remote controller offers the convenience of ATT, a function not provided on the head unit.

About the Demo Mode

This product features two demonstration modes. One is the Reverse Demo mode, the other is the Feature Demo mode.

Reverse Demo

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Pressing button 5 when power to this product is switched OFF while the ignition switch is set to ACC or ON cancels the Reverse Demo mode. Pressing button 5 again to start the Reverse Mode.

Feature Demo

The Feature Demo automatically starts when power to this product is switched OFF while the ignition switch is set to ACC or ON. Pressing button 6 during Feature Demo operation cancels the Feature Demo mode. Pressing button 6 again to start the Feature Mode. Remember that if the Feature Demo continues operating when the car engine is switched OFF, it may drain battery power.

Note:

• You cannot cancel a Demo mode when the front panel is open.

• The red lead (ACC) of this product should be connected to a terminal coupled with ignition switch

ON/OFF operations. If this is not done, the vehicle battery may be drained.

• This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC).

Before Using This Product

Precaution

• The Pioneer CarStereo-Pass is for use only in Germany.

• Keep this manual handy as a reference for operating procedures and precautions.

• Always keep the volume low enough for outside sounds to be audible.

• Protect this product from moisture.

• If the battery is disconnected, the preset memory will be erased and must be repro-

grammed.

In Case of Trouble

Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.

When using the 50-Disc Type Multi-CD Player

The available functions of the 50-Disc Type Multi-CD Player are described in this Operation Manual. Note that other 50-Disc Type Multi-CD Player functions cannot be used with this product.

Basic Operation

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

To Listen to Music

The following explains the initial operations required before you can listen to music.

Note:

• Loading a cassette in this product. (Refer to page 9.)

1. Select the desired source. (e.g. Tuner)

Each press of the SOURCE/OFF button selects the desired source in the following order: CD player (one disc only) = TV = Tuner = DAB (Digital Audio Broadcasting) Tuner = Tape = Multi-CD player = External Unit 1 = External Unit 2 = AUX = Telephone standby

Note:

• External Unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this product. Two External Units can be controlled by this product, although “External” is displayed whether you select External Unit 1 or External Unit 2. When two External Units are connected, the allocation of them to External Unit 1 or External Unit 2 is automatically set by this product.

• In the following cases, the sound source will not change: * When a product corresponding to each source is not connected to this product. * When no tape is set in this product. * When no magazine is set in the Multi-CD player. * When the AUX (external input) is set to OFF. (Refer to page 48.) * When the Telephone standby is set to OFF. (Refer to page 51.)

• When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal, the car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna, switch the source OFF.

2. Extend the VOLUME forward.

When you press the VOLUME, it extends forward so that it becomes easier to roll. To retract the VOLUME, press it again.

Continued overleaf.

Each press changes the Source ...

3. Raise or lower the volume.

Rolling the VOLUME changes the volume level.

Note:

• Roll clockwise to raise the volume level.

• Roll counterclockwise to lower the volume level.

4. Turn the source OFF.

Hold for 1 second

Basic Operation

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Basic Operation of Tuner

This product’s AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations. (Refer to page 18.)

Manual and Seek Tuning

• You can select the tuning method by changing the length of time you press the 2/3 button.

Manual Tuning (step by step) 0.5 seconds or less Seek Tuning 0.5 seconds or more

Note:

• If you continue pressing the button for longer than 0.5 seconds, you can skip

broadcasting stations. Seek Tuning starts as soon as you release the button.

• Stereo indicator “” lights when a stereo station is selected.

Preset Tuning

• You can memorize broadcast stations in buttons 1 through 6 for easy, one-touch station recall.

Preset station recall 2 seconds or less Broadcast station preset memory 2 seconds or more

Note:

• Up to 18 FM stations (6 in FM 1, FM 2 and FM 3) and 6

MW/LW stations can be stored in memory.

• You can also use the 5 or ∞ buttons to recall broadcast sta-

tions memorized in buttons 1 through 6.

Band

FM 1 = FM 2 = FM 3 = MW/LW

Preset Number Indicator

Band Indicator

Frequency Indicator

Basic Operation

Basic Operation of Cassette Player

Note:

• Be sure to close the front panel after loading or ejecting a cassette.

Direction Indicator

Switching the Display

Each press of the DISPLAY button changes the display in the following order: Playback mode A (Play time) = Playback mode B

Play Time Indicator

Note:

• The continuous playback time count starts at “00 min 00 sec” at the following times. * When a tape is inserted. * When the tape direction is changed. * When you rewind the tape side currently playing

back to the beginning.

• The continuous playback time count is halted when fast-forwarding/rewinding and while the Music Search function is operating.

Open

Note:

• Use to open the front panel when loading or ejecting a cassette. (The illustration on the right shows the front panel open.)

Direction Change

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Precaution:

• To avoid a malfunction, make sure that no metal object comes into contact with the terminals when the front panel is open.

Eject

Note:

• The Tape function can be turned ON/OFF with the cassette tape remaining in this product. (Refer to page 6.)

Fast Forward/Rewind and Music Search

• Each press of the 3 button selects Fast Forward or ForwardMusic Search.

FF (Fast Forward) = F-MS (Forward-Music Search) = Normal Playback

• Each press of the 2 button selects Rewind or Rewind-Music Search.

REW (Rewind) = R-MS (Rewind-Music Search) = Normal Playback

Note:

• Fast Forward/Rewind and Music Search can be canceled by pressing the BAND but-

ton.

Cassette Loading Slot

Note:

• “Metal” appears automatically when a metal or chrome tape is inserted. Nothing is displayed for a normal tape.

Disc Search

Disc Number Search (for 6-Disc, 12-Disc types)

• You can select discs directly with the 1 to 6 buttons. Just press the number corresponding to the disc you want to listen to.

Note:

• When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the

1 to 6 buttons for 2 seconds or longer.

Note:

• The Multi-CD player may perform a preparatory operation, such as verifying the presence of

a disc or reading disc information, when the power is turned ON or a new disc is selected for playback. “Ready” is displayed.

• If the Multi-CD player cannot operate properly, an error message such as “ERROR-14” is

displayed. Refer to the Multi-CD player owner’s manual.

• If there are no discs in the Multi-CD player magazine, “NO DISC” is displayed.

Basic Operation

Basic Operation of Multi-CD Player

This product can control a Multi-CD player (sold separately).

Track Search and Fast Forward/Reverse

• You can select between Track Search or Fast Forward/Reverse by pressing the 2/3 button for a different length of time.

Track Search 0.5 seconds or less Fast Forward/Reverse Continue pressing

Play Time Indicator

Track Number Indicator

Disc Number Indicator

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Corresponding Display Indications and Buttons

This product’s display features Key Guidance Indicators. These light to indicate which of the 5/∞/2/3, FUNCTION and AUDIO buttons you can use. When you’re in the Function Menu (refer to next section), Detailed Setting Menu (refer to page 14), Initial Setting Menu (refer to page 46) or Audio Menu (refer to page 37), they also make it easy to see which 5/∞/2/3 buttons you can use to switch functions ON/OFF, switch repeat selections and perform other operations. Indicator and corresponding buttons are shown below.

7 Head Unit 7 Steering Remote 7 Display

Controller

When 1 is lit in the display, perform appropriate operations with the z buttons. When 2 is lit in the display, it indicates that you are in the Function Menu, Detailed Setting Menu or Initial Setting Menu. You can switch between each of these menus and between different modes in the menus using button x on the head unit or steering remote controller. When 3 is lit in the display, it indicates you are in the Audio Menu. You can switch between modes in the Audio Menu using button c on the head unit or steering remote controller.

Entering the Function Menu

The Function Menu lets you operate simple functions for each source.

Note:

• After entering the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled.

1. Select the desired mode in the Function Menu. (Refer to next section, “Function Menu Functions”.)

Continued overleaf.

Each press changes the Mode ...

Basic Operation

2. Operate a mode. (e.g. Repeat Play)

3. Cancel the Function Menu.

Function Menu Functions

The following chart shows functions for each source in the Function Menu. The chart also shows indications for each function, operations and buttons used to perform operations. For more details, or when you want to know about an operation, refer to the page number indicated in the chart.

7 Tuner

Function name (Display) Button: Operation Page

Best Stations Memory (BSM) 5: ON 16

∞: OFF

Regional (REG) 5: ON 19

∞: OFF

Local Seek Tuning (LOCAL) 1 5: ON 16

3 ∞: OFF

2 2 or 3: Select (Sensitivity)

TA Function (TA) 5: ON 20

∞: OFF

AF Function (AF) 5: ON 18

∞: OFF

News Program Interruption Setting 5: ON 23 (NEWS) ∞: OFF

The button used and the operation it performs are indicated by the key guidance indicator. Press the 5 button to switch the key guidance indicator ON, and the ∞ button to switch it OFF.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

7 Cassette Player

Function name (Display) Button: Operation Page

Repeat Play (RPT) 5: ON 27

∞: OFF

Blank Skip (B.S) 5: ON 27

∞: OFF

Radio Intercept (R.INT) 5: ON 28

∞: OFF

Dolby B NR (B NR) 5: ON 28

∞: OFF

7 Multi-CD Player

Function name (Display) Button: Operation Page

Repeat Play (PMODE) 2 or 3: Select (Play range) 29 Selecting Discs by Disc Title List 1 2 or 3: Select (Disc Title) 34

(T.LIST) 2 5: Play Random Play (RDM) 5: ON 29

∞: OFF

Scan Play (SCAN) 5: ON 30

∞: OFF

ITS Play (ITS-P) 5: ON 31

∞: OFF

Pause (PAUSE) 5: ON 30

∞: OFF

Compression and DBE 5 or ∞: Select 35 (COMP) (Sound Quality Function)

Entering the Detailed Setting Menu

In the Detailed Setting Menu, you can operate convenient, complex functions for each source.

1. Enter the Detailed Setting Menu.

Continued overleaf.

Hold for 2 seconds

Basic Operation

2. Select the desired mode. (Refer to next section, “Detailed Setting Menu Functions”.)

3. Operate a mode.

4. Cancel the Detailed Setting Menu.

Note:

• You can cancel the Detailed Setting Menu by pressing the FUNCTION button again for 2 seconds.

Detailed Setting Menu Functions

The following chart shows functions for each source in the Detailed Setting Menu. The chart also shows indications for each function, operations and buttons used to perform operations. For more details, or when you want to know about an operation, refer to the page number indicated in the chart.

Note:

• Tuner and Cassette Player have no Detailed Setting Menu.

7 Multi-CD Player

Function name (Display) Button: Operation Page

Disc Title Input (TITLE) 1 5 or ∞: Select (Letter) 33

2 2 or 3: Select (Position) 3 3: Memory

ITS Programming (ITS) 5: Memory 31

Each press changes the Mode ...

Tuner Operation

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Local Seek Tuning (LOCAL)

When Local is ON, you can only select broadcast stations providing strong reception.

1. Press the FUNCTION button and select the Local mode (LOCAL) in the Function Menu.

FM : Local 1 Ô Local 2 Ô Local 3 Ô Local 4 MW/LW : Local 1 Ô Local 2

Note:

• The Local 4 setting allows reception of only the strongest stations, while lower settings let you

receive progressively weaker stations.

Best Stations Memory (BSM)

The BSM function stores stations in memory automatically.

1. Press the FUNCTION button and select the BSM mode (BSM) in the Function Menu.

• To cancel the process, press the ∞ button in the Function Menu before memorization is complete.

2. Switch the BSM ON with the 5 button.

The stations with the strongest signals will be stored under buttons 1–6 and in order of their signal strength.

3. Select the desired Local Seek sensitivity with the 2/3 buttons.

2. Switch the Local ON/OFF with the 5/∞ buttons.

A Title (English)

What is RDS?

RDS (Radio Data System) is a system for transmitting data along with FM programs. This data, which is inaudible, provides a variety of features such as: program service name, program type display, traffic announcement standby, automatic tuning and program type tuning, intended to aid radio listeners in tuning to a desired station.

Note:

• RDS service may not be provided by all stations.

• RDS functions, like AF (Alternative frequencies search) and TA (Traffic Announcement standby), are only active when your radio is tuned to RDS stations.

Program Service Name Display

With this function, the names of networks/stations providing RDS services replace the frequency on the display a few seconds after they are tuned in.

• When you want to know PTY Information or the frequency of the current station, change the display.

Each press of the DISPLAY button selects the display in the following order: Program Service Name (A) = PTY Information and Frequency = Program Service Name (B)

Note:

• After switching displays, if you do not perform an operation within 8 seconds, the Program Service

Name (A) is automatically displayed. (When the Program Service Name (B) is selected, the display remains.)

7 PTY Information

PTY (Program Type ID code) information for the currently tuned station appears on the display for 8 seconds. The information is correlated with the list in the section “PTY List” on page 24.

Note:

• If a PTY code of zero is received from a station, “None” will be displayed. This indicates that the

station has not defined its program contents.

• If the signal is too weak for this product to pick up the PTY code, “NO PTY” will be displayed.

7 Frequency

The frequency of the current station appears on the display.

Each press changes the Display ...

Using RDS Functions

A Title (English)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

AF Function (AF)

The AF (Alternative Frequencies search) function is used to search for other frequencies in the same network as the currently tuned station. It automatically retunes the receiver to another frequency in the network which is broadcasting a stronger signal when there are problems with reception of the currently tuned station or better reception is possible on a different frequency.

Note:

• AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with the “AF ” indicator ON.

• When you recall a preset station, the tuner may update the preset station with a new frequency from the station’s AF list. (This is only available when using presets on the FM1 and FM2 bands.) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station.

• Sound may be temporarily interrupted by another program during an AF frequency search.

• When the tuner is tuned to a non-RDS station, the “AF ” indicator flashes.

• AF can be switched ON or OFF independently for each FM band.

Activating/Deactivating the AF Function

AF is set to ON by default.

1. Press the FUNCTION button and select the AF mode (AF) in the Function Menu.

2. Activate or deactivate AF while in an FM band.

A Title (English)

PI Seek Function

The tuner searches for another frequency broadcasting the same programming. “PI SEEK” appears on the display and the radio volume is muted during a PI Seek. The muting is discontinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the PI Seek is unsuccessful, the tuner returns to the previous frequency.

PI Seek

If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too weak for proper reception, the PI Seek will automatically start.

Auto PI Seek (for preset station)

When preset stations cannot be recalled, as when traveling long distances, this product can be set to perform PI Seek also during preset recall. The default setting for Auto PI Seek is OFF.

Note:

• Refer to “Initial Setting” for details on how to switch Auto PI Seek ON/OFF.

Regional Function (REG)

When AF is used to retune the tuner automatically, REG (regional) limits the selection to stations broadcasting regional programs.

Note:

• Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).

• The preset number may disappear on the display if the tuner tunes in a regional station which differs from the originally set station.

• REG can be switched ON or OFF independently for each FM band.

Activating/Deactivating the REG Function

The REG function is set to ON by default.

1. Press the FUNCTION button and select the REG mode (REG) in the Function Menu.

2. Activate or deactivate REG while in an FM band.

Using RDS Functions

TA Function (TA)

The TA (Traffic Announcement standby) function lets you receive traffic announcements automatically, no matter what source you are listening to. The TA function can be activated for either a TP station (a station that broadcasts traffic information) or an EON TP station (a station carrying information which cross-references TP stations).

Activating/Deactivating the TA Function

1. Tune in a TP or EON TP station.

The TP indicator (“ ”) lights when the tuner is tuned to a TP station or an EON TP station.

2. Activate the TA function.

The TA indicator (“ ”) lights, indicating that the tuner is waiting for traffic announcements.

Repeat the preceding operation when no traffic announcement is being received to deactivate the TA function.

Note:

• You can also switch the TA Function ON/OFF in the Function Menu.

• The system switches back to the original source following traffic announcement reception.

• The TA function can be activated from sources other than tuner if the tuner was last set to the FM band but not if it was last set to the MW/LW band.

• If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions while listening to sources other than tuner.

• Only TP or EON TP stations are tuned in during the Seek Tuning mode when the TA indicator (“ ”) is ON.

• Only TP or EON TP stations are stored by BSM when the TA indicator (“ ”) is ON.

A Title (English)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

”“

“”

A Title (English)

Canceling Traffic Announcements

• Press the TA button while a traffic announcement is being received to cancel the announcement and return to the original source.

The announcement is canceled but the tuner remains in the TA mode until the TA button is pressed again.

Adjusting the TA Volume

When a traffic announcement begins, the volume adjusts automatically to a preset level to enable you to hear the announcement clearly.

• Set the volume by adjusting it during reception of a traffic announcement.

The newly set volume is stored in memory and recalled for subsequent traffic announcements.

TP Alarm Function

About 30 seconds after the TP indicator (“ ”) is extinguished due to a weak signal, a 5 second beep sounds to remind you to select another TP or EON TP station.

• If you are listening to the tuner, tune in another TP station or EON TP station.

In sources other than tuner, the tuner automatically seeks out the TP station with the strongest signal in the current area 10 (or 30)* seconds after the TP indicator (“ ”) disappears from the display.

* Time taken before Seek begins.

TA function ON 10 seconds TA, AF functions ON 30 seconds

Using RDS Functions

A Title (English)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

PTY Function

With Wide and Narrow classification of program type, the PTY function provides two ways to select stations by the type of program being broadcast (PTY Search). It also provides automatic tuning to emergency broadcasts (PTY Alarm).

Note:

• There’s no need to perform PTY Search settings again if they have previously been set. After switching to the PTY Search Setting mode in Step 1, just perform PTY Search in Step 4.

Searching the PTY

1. Select the PTY Search Setting mode.

2. Select the PTY Search method (Wide, Narrow).

3. Select one from among the PTY.

4. Start PTY Search.

The tuner searches for a station broadcasting the desired PTY. To cancel the PTY Search Setting mode, hold down the PTY button for 2 seconds.

Note:

• The program of some stations may differ from that indicated by the transmitted PTY.

• If no station broadcasting the selected programming type is found, “Not Found” is displayed for about 2 seconds, and the tuner returns to the original station.

A Title (English)

News Program Interruption Setting (NEWS)

You can switch automatic reception of PTY code news programs ON/OFF. When a received news program ends, reception of the previous program resumes.

• Set interruption to ON or OFF.

Note:

• You can also switch the News Program Interruption Setting ON/OFF in the Function Menu.

PTY Alarm

PTY Alarm is a special PTY code for announcements regarding emergencies such as natural disasters. When the tuner receives the radio alarm code, “ALARM” appears on the display and the volume adjusts to the TA volume. When the station stops broadcasting the emergency announcement, the system returns to the previous source.

Note:

• The system switches back to the original source following emergency announcement reception.

Canceling Announcements

• Press the TA button during announcement reception to cancel the announcement and return to the previous source.

”“Hold for 2 seconds

Using RDS Functions

A Title (English)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

PTY List

Wide Narrow Details

News&Inf News News.

Affairs Current affairs. Info General information and advice. Sport Sports programs. Weather Weather reports/Meteorological information. Finance Stock market reports, commerce, trading etc.

Popular Pop Mus Popular music.

Rock Mus Contemporary modern music. Easy Mus Easy listening music. Oth Mus Other types of music, which can’t be

categorized. Jazz Jazz music based programs. Country Country music based programs. Nat Mus National music based programs. Oldies Oldies music, ‘Golden age’ based programs. Folk Mus Folk music based programs.

Classics L. Class Light classical music.

Classic Serious classical music.

Others Educate Educational programs.

Drama All radio plays and serials. Culture Programs concerned with any aspect of national

or regional culture. Science Programs about nature, science and technology. Varied Light entertainment programs. Children Children’s programs. Social Social affairs programs. Religion Religion affairs programs or services. Phone In Phone in based programs. Touring Travel programs, not for announcements about

traffic problem. Leisure Programs about hobbies and recreational

activities. Document Documentary programs.

Using RDS Functions

Radio Text

This tuner can display Radio Text data transmitted by RDS stations, such as station information, the name of the currently broadcast song and the name of the artist.

Note:

• When Radio Text is received, the “TEXT” indicator lights.

• The tuner automatically memorizes the three latest Radio Text broadcasts received, replacing text from the least recent reception with new text when it is received.

• You can store data from up to six Radio Text transmissions in buttons 1–6.

• If you do not perform an operation within 8 seconds, the Radio Text mode is canceled.

Radio Text Display

1. Switch to the Radio Text mode.

Radio Text data currently being received is automatically scrolled in the display.

Note:

• Press the TEXT button once more, and the Radio Text mode is canceled.

• The Radio Text mode is canceled after text data has been scrolled through three times in the display.

• When no Radio Text is currently being received, “NO TEXT” is displayed, and the Radio Text mode is canceled after 8 seconds.

2. Recalling the three latest Radio Text broadcasts from the tuner’s memory.

Pressing the button switches between the three Radio Text data displays.

Note:

• If there is no Radio Text data stored in the tuner, this button does not operate.

3. Press 2 or 3 to stop automatic scrolling of Radio Text data.

After stopping automatic scroll, text scrolls one letter at a time you press the button.

Hold for 2 seconds

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Storing Radio Text in Memory

1. Perform “Radio Text Display” steps 1 and 2, and then select the Radio Text you want to store in memory.

2. Press one of buttons 1–6 for 2 seconds to store the desired Radio Text. (e.g. Press button 4 for 2 seconds.)

The Radio Text is stored in memory under the selected button.

Recalling Preset Radio Text

1. Switch to the Radio Text mode.

2. Press one of buttons 1–6 to recall a Radio Text preset under that button. (e.g. Press button 4.)

Hold for 2 seconds

Using the Cassette Player

Repeat Play (RPT)

The repeat play lets you hear the same song over again.

1. Press the FUNCTION button and select the Repeat mode (RPT) in the Function Menu.

Blank Skip (B.S)

This function fast-forwards to the next song automatically if there is a long period of silence (12 seconds or longer) between songs.

1. Press the FUNCTION button and select the Blank Skip mode (B.S) in the Function Menu.

2. Switch the Blank Skip ON/OFF with the 5/∞ buttons.

2. Switch the Repeat Play ON/OFF with the 5/∞ buttons.

A Title (English)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Radio Intercept (R.INT)

This function allows you to listen to the radio during tape fast-forwarding/rewinding.

Note:

• The radio intercept function does not work during a Music Search operation.

1. Press the FUNCTION button and select the Radio Intercept mode (R.INT) in the Function Menu.

Dolby B NR (B NR)

Switch to the Dolby B NR on when listening to a cassette recorded with Dolby B NR.

1. Press the FUNCTION button and select the Dolby B NR mode (B NR) in the Function Menu.

Note:

• Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.

“DOLBY” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

2. Switch the Dolby B NR ON/OFF with the 5/∞ buttons.

2. Switch the Radio Intercept ON/OFF with the 5/∞ buttons.

Using Multi-CD Players

Repeat Play (PMODE)

There are three repeat play ranges: One-track Repeat, Disc Repeat and Multi-CD player Repeat. Default repeat play range is Multi-CD player Repeat.

1. Press the FUNCTION button and select the Repeat mode (PMODE) in the Function Menu.

Play range Display

Multi-CD player Repeat MCD One-track Repeat TRK Disc Repeat DISC

Note:

• If you select other discs during the repeat play, the repeat play range changes to Multi-CD player

Repeat.

• If you perform Track Search or Fast Forward/Reverse during One-track Repeat, the repeat play

range changes to Disc Repeat.

Random Play (RDM)

Tracks are played at random within the selected repeat play range as explained in “Repeat Play” above.

1. Press the FUNCTION button and select the Random mode (RDM) in the Function Menu.

Display Play range

D.RANDOM Disc Repeat RANDOM Multi-CD player Repeat

Note:

• One-track Repeat changes to the Disc Repeat when you switch the Random Play ON.

2. Switch the Random Play ON/OFF with the 5/∞ buttons.

After selecting the desired repeat play range from those referred to in “Repeat Play” above, switch MultiCD Player Random Play ON.

2. Select the desired repeat play range with the 2/3 buttons.

Multi-CD player Repeat = Onetrack Repeat = Disc Repeat

+ 90 hidden pages