Pioneer DEH-2800MP, DEH-2820MP, DEH-281MP, CRT3555 Service manual

ORDER NO.

CRT3555

DEH-2800MP/XN/EW

HIGH POWER CD/MP3/WMA PLAYER WITH RDS TUNER

DEH-2800MP

DEH-2800MPB DEH-2820MP

HIGH POWER CD/MP3/WMA PLAYER WITH FM/MW/LW TUNER

DEH-281MP

This service manual should be used together with the following manual(s):

Model No. Order No. Mech.Module Remarks

CX-3164 CRT3583 S10.5COMP1 CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly

/XN/EW

For details, refer to "Important Check Points for Good Servicing".

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936

PIONEER CORPORATION 2005

K-ZZA. NOV. 2005 Printed in Japan

1234

SAFETY INFORMATION

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.

A

Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician.

- Safety Precautions for those who Service this Unit.

• When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable results.

Caution:

B

1. During repair or tests, minimum distance of 13cm from the focus lens must be kept.

2. During repair or tests, do not view laser beam for 10 seconds or longer.

- CD Section Precaution

1. You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual.

C

2. Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors during power-on mode may damage the ICs inside the unit.

3. To protect the pickup unit from electrostatic discharge during servicing, take an appropriate treatment (shorting-solder) by referring to "the DISASSEMBLY".

4. After replacing the pickup unit, be sure to check the grating.

D

E

F

2

1234

DEH-2800MP/XN/EW

5678

[Important Check Points for Good Servicing]

In this manual, procedures that must be performed during repairs are marked with the below symbol. Please be sure to confirm and follow these procedures.

1. Product safety

Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by following the safety instructions described in this manual.

1 Use specified parts for repair.

Use genuine parts. Be sure to use important parts for safety.

2 Do not perform modifications without proper instructions.

Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as radio/TV interference and foreign noise.

3 Make sure the soldering of repaired locations is properly performed.

When you solder while repairing, please be sure that there are no cold solder and other debris. Soldering should be finished with the proper quantity. (Refer to the example)

4 Make sure the screws are tightly fastened.

Please be sure that all screws are fastened, and that there are no loose screws.

5 Make sure each connectors are correctly inserted.

Please be sure that all connectors are inserted, and that there are no imperfect insertion.

6 Make sure the wiring cables are set to their original state.

Please replace the wiring and cables to the original state after repairs. In addition, be sure that there are no pinched wires, etc.

7 Make sure screws and soldering scraps do not remain inside the product.

Please check that neither solder debris nor screws remain inside the product.

8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.

Damaged power cords may lead to fire accidents, so please be sure that there are no damages. If you find a damaged power cord, please exchange it with a suitable one.

9 There should be no spark traces or similar marks on the power plug.

When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure connections and suitable usage. Please exchange the power cord if necessary.

0 Safe environment should be secured during servicing.

When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries. Please pay attention to your surroundings and repair safely.

A

B

C

D

2. Adjustments

To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification. Adjustments should be performed in accordance with the procedures/instructions described in this manual.

3. Lubricants, Glues, and Replacement parts

Use grease and adhesives that are equal to the specified substance. Make sure the proper amount is applied.

4. Cleaning

For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper cleaning should be performed to restore their performances.

5. Shipping mode and Shipping screws

To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual.

56

DEH-2800MP/XN/EW

E

F

7

8

3

1234

1. SPECIFICATIONS

A

B

C

D

E

56

DEH-2800MP/XN/EW

F

7

8

5

1234

A

B

C

D

E

F

6

1234

DEH-2800MP/XN/EW

5678

A

B

C

D

E

56

DEH-2800MP/XN/EW

F

7

8

7

N

3

6

5

1234

2. EXPLODED VIEWS AND PARTS LIST

OTES : • Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List.

• The > mark found on some component parts indicates the importance of the safety factor of the part.

A

Therefore, when replacing, be sure to use parts of identical designation.

• Screw adjacent to mark on the product are used for disassembly.

• For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions,apply as you think it appropriate.)

2.1 PACKING

"

B

C

D

1

E

F

8

1234

DEH-2800MP/XN/EW

5678

(1)PACKING SECTION PARTS LIST

Mark No. Description Part No.

1 Cord Assy CDE7704 2 Accessory Assy CEA3865 3 Fixing Screw(M2 x 4) CBA1994 4 Screw CBA1650 * 5 Polyethylene Bag CEG1160

6 Handle CNC5395 7 Bush CNV3930 8 Polyethylene Bag CEG-162 9 Carton See Contrast table(2) 10 Contain Box See Contrast table(2)

Mark No. Description Part No.

11 Protector CHP2664 12 Protector CHP2868 13-1 Owner's Manual See Contrast table(2) 13-2 Owner's Manual See Contrast table(2) 13-3 Installation Manual CRD4025

* 13-4 Passport CRY1013 * 13-5 Warranty Card CRY1157 14 Case Assy CXB3520

A

(2) CONTRAST TABLE

DEH-2800MP/XN/EW, DEH-2800MPB/XN/EW, DEH-2820MP/XN/EW and DEH-281MP/XN/EW are constructed the same except for the following:

Mark No. Description

9 Carton CHG5632 CHG5627 CHG5628 CHG5681 10 Contain Box CHL5632 CHL5627 CHL5628 CHL5629 13-1 Owner's Manual CRD4023 CRD4023 CRD4023 CRD4026 13-2 Owner's Manual CRD4024 CRD4024 CRD4024 Not used

DEH-2800MP/XN/EWDEH-2800MPB/XN/EWDEH-2820MP/XN/

EW

DEH-281MP/XN/EW

Owner's Manual,Installation Manual

Part No. Language

CRD4023 English, Spanish, German

CRD4024 French, Italian, Dutch, Russian

CRD4026 English, Spanish, German, French, Italian, Dutch, Russian

CRD4025 English, Spanish, German, French, Italian, Dutch, Russian

B

C

D

56

DEH-2800MP/XN/EW

E

F

7

8

9

1234

2.2 EXTERIOR

A

B

C

D

E

F

10

1234

DEH-2800MP/XN/EW

5678

(1)EXTERIOR SECTION PARTS LIST

Mark No. Description Part No.

1 Screw BSZ26P060FTC 2 Screw BSZ26P100FTC 3 Cord Assy CDE7704 4 Cap CKX-003 5 Cable CDE7985

Mark No. Description Part No.

31 Cover CNM6276 32 Panel CNS8403 33 Arm CNV4692 34 Arm CNV4728 35 Arm CNV5576

A

6 Case CNB2793 7 Holder CNC8659 8 Insulator CNM9145 9 Tuner Amp Unit See Contrast table(2) 10 Screw ASZ26P060FTC

11 Screw BMZ26P160FTC 12 Screw BPZ26P080FTC > 13 Fuse(10 A) CEK1208 14 Pin Jack(CN352) CKB1059 15 Plug(CN901) CKM1376

16 Connector(CN831) CKS3581 17 Connector(CN651) CKS3834 18 Connector(CN652) See Contrast table(2) 19 Antenna Jack(CN401) CKX1056 20 Holder CND2414

21 Holder See Contrast table(2) 22 Heat Sink CNR1762 23 FM/AM Tuner Unit See Contrast table(2) 24 Holder CND1054 25 Button(DETACH) CAC4836

26 Spring CBH1835 27 Spring CBH2208 28 Spring CBH2367 29 Bracket CNC6791 30 Holder CNC8042

36 Screw IMS20P030FTB 37 Detach Grille Assy See Contrast table(2) 38 Screw BPZ20P100FTB 39 Button(DETACH) CAC9382 40 Button(VOLUME(+ / -)) CAC9384

41 Button 42 Button( ↑ , → ,EJECT) CAC9386 43 Button( ↓ , ← ) CAC9387 44 Button(EQ,DISPLAY) CAC9388 45 Button(SOURCE,BAND) See Contrast table(2)

46 Spring CBH2210 47 Cover CNS8367 48 LCD See Contrast table(2) 49 Connector(CN1801) CKS3580 50 Holder CND2949

51 Sheet See Contrast table(2) 52 Sheet See Contrast table(2) 53 Lighting Conductor CNV8712 54 Rubber CNV8713 55 Connector CNV8714

56 Grille Unit See Contrast table(2) 57 Chassis Unit See Contrast table(2) 58 CD Mechanism Module(S10.5) CXK5752

59 Transistor(Q911,921,991) 2SD2396 60 IC(IC302) See Contrast table(2)

(TA,1-6,LOCAL/BSM,AUDIO)

CAC9385

B

C

D

(2) CONTRAST TABLE

DEH-2800MP/XN/EW, DEH-2800MPB/XN/EW, DEH-2820MP/XN/EW and DEH-281MP/XN/EW are constructed the same except for the following:

Mark No. Description

9 Tuner Amp Unit CWN1273 CWN1273 CWN1273 CWN1274 18 Connector(CN652) CKS4124 CKS4124 CKS4124 Not used 21 Holder CND2984 CND2984 CND2984 CND2413 23 FM/AM Tuner Unit CWE1951 CWE1951 CWE1951 CWE1954 37 Detach Grille Assy CXC5240 CXC5242 CXC5241 CXC5243

45 48 LCD CAW1900 CAW1903 CAW1900 CAW1901 51 Sheet Not used CNM9766 Not used Not used 52 Sheet Not used CNM9767 Not used Not used 56 Grille Unit CXC5271 CXC5273 CXC5272 CXC5274

57 Chassis Unit CXC5265 CXC5267 CXC5266 CXC5268

Button(SOURCE,BAND)

60 IC(IC302) PAL007B PAL007B PAL007B TDA7386

56

DEH-2800MP/XN/EWDEH-2800MPB/XN/EWDEH-2820MP/XN/

EW

CAC9516 CAC9516 CAC9516 CAC9383

DEH-2800MP/XN/EW

7

DEH-281MP/XN/EW

8

E

F

11

1234

2.3 CD MECHANISM MODULE

A

B

C

D

E

F

12

1234

DEH-2800MP/XN/EW

5678

CD MECHANISM MODULE SECTION PARTS LIST

Mark No. Description Part No.

1 CD Core Unit(S10.5COMP1) CWX3176 2 Connector(CN101) CKS4182 3 Connector(CN901) CKS5284 4 Screw BMZ20P025FTC 5 Screw BSZ20P040FTC

6 Screw(M2 x 3) CBA1511 7 Screw(M2 x 4) CBA1835 8 Washer CBF1038 9 ••••• 10 Spring CBH2609

11 Spring CBH2612 12 Spring CBH2614 13 Spring CBH2616 14 Spring CBH2617 15 Spring CBH2620

16 Spring CBH2855 17 Spring CBH2937 18 Spring CBH2735 19 Spring CBH2854 20 Spring CBH2642

21 Spring CBH2856 22 Spring CBH2857 23 Spring CBH2860 24 Spring CBH2861 25 Spring CBL1686

26 Arm CND1909 27 Frame CND2582 28 Bracket CND2583 29 Arm CND2584 30 Lever CND2585

Mark No. Description Part No.

50 Rack CNV8342

51 Roller CNV8343 52 Holder CNV8344 53 Arm CNV8345 54 Guide CNV8347 55 Arm CNV8348

56 Arm CNV8349 57 Arm CNV8350 58 Clamper CNV8365 59 Arm CNV8386 60 Guide CNV8396

61 Arm CNV8413 62 Collar CNV8938 63 Motor Unit(M2) CXC4026 64 Arm Unit CXC4027 65 Chassis Unit CXC4028

66 Gear Unit CXC4029 67 Frame Unit CXC4031 68 Motor Unit(M1) CXC6742 69 Screw Unit CXC6359 70 Screw JFZ20P020FTC

71 Screw JGZ17P022FTC 72 Washer YE20FTC 73 Pickup Unit(P10.5)(Service) CXX1942 74 Screw IMS26P030FTC

A

B

C

D

31 Arm CND2586 32 Bracket CND2587 33 Arm CND2588 34 Lever CND2589 35 Holder CNV7201

36 Gear CNV7207 37 Gear CNV7208 38 Gear CNV7209 39 Gear CNV7210 40 Gear CNV7211

41 Gear CNV7212 42 Rack CNV7214 43 Arm CNV7216 44 Roller CNV7218 45 Gear CNV7219

46 Guide CNV7361 47 Gear CNV7595 48 Guide CNV7799 49 Arm CNV7805

56

DEH-2800MP/XN/EW

E

F

7

8

13

E

K

A

O

S

6 1 1

1234

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM

3.1 BLOCK DIAGRAM

A

B

ANTENNA

C

TUNER AMP UNIT

A

FM/AM TUNER UNIT

CN401

1

2

1

3

AM ANT

FM ANT

ATT

ANT adj

FMRF

RF adj

VDD

7 6 13 5 10 9 8 11 14 18 19 20 21

NC

CE2

IC 3 EEPROM

5.0V

OSC

IC 1

3.3V

MIXER, IF AMP

T51

RFGND

OSCGND

DGND

212 1522 16 4 17

AUDIOGNDNCVCC

LPF

CF52

ROM_VDD

VDD_3.3

SL

3.3V

TUN 3.3V VCC(SYS 8V)

TUNPCK

TUNPDI

DI

IC 5

←

5V 3.3V

IC 4

3.3V 2.5V

CK

←

CE1

A,B,C

LDET

2.5V

TUNPDO

DO

RDS_CK

RDS_DATA

RDS_HSLK

RDS_LOCK

IC 2

2.5V

DET, FM MPX,

RDS DECODER

Rch

24

Lch

23

TUN_Lch

CD_Lch

RDS_L

RDS_H

RDS_C

RDS_D

A,B,C

1

2

PICKUP UNIT (P10.5)(SERVICE)

LASER

D

DIODE

MONITOR

DIODE

LOAD/

HOLOGRAM

FOCUS ACT.

TRACKING ACT.

SPINDLE

MOTOR

CARRIAGE

MOTOR

UNIT

LD-

MD

VREF

FOM

FOP TOP

TOM

LD+

M

E

F

CD CORE UNIT(S10.5COMP1)

C

D

F,E

S905

8EJ

4

NJM2886DL3-33

V3R3D

142

LD

143

PD

133

REFOUT

DIGITAL SERVO / DATA PROCESSOR

TD,FD

12

FOM

11

FOP

14

TOP

13

TOM

IC301

BA5835FP

16

SOP

15

SOM

18

LCOP

17

LCOM

S903

DSCSNS

IC203

CN101

15

Q101

5

REFO

88

AC,BD

FOM

33

FOP

2

TOP

1

TOM

44

14

S904 12EJ

V3R3D

+3.3V REGULATOR

A:DEH-2800MP/XN/EW B:DEH-2800MPB/XN/EW

IC201

UPD63763CGJ

RF-AMP,CD DECODER, MP3 , WMA, DECODER,

SD,MD

CD

DRIVER

CLCONT

LOEJ

CONT

1

3

LOCK/RFOK

21

41

CLCONT

22

40

LOEJ

9

47

CONT

CD CONTROLLER

32

12EJ

31

8EJ

30

DSCSNS

42

HOME

S901

HOME

VD

56

63

LOCK

PE5505A

CD3VON

46

XRST,XASTB,ADO,XCK,

XSO,XSI,WAIT,XINT

/CD3VON

RESET

CDMUTE

IC701

X1

X2

VDCONT

LOUT

XTAL

/XTAL

SWVDD

43 14 39

12

13

49

34

35

CN901

31

X201

16.93MHz

VDD

Q701

/RESET

CDMUTE

BRST,BRXEN,BSRQ

BDATA,BSCK

VD

X701

4.00MHz

VDCONT

LOUT

VDD

CN651

LOUT

16

5

SYSTEM

IC PE55 PE55

10

11

10

8

VD

1

2

9

11 13

20

19

12

RESET

VD

VDCONT

VDD

Q991

CD VD

Q992

BRST,BRXEN,BSRQ

BDATA,BSCK

B.UP

36

NC

C:DEH-2820MP/XN/EW D:DEH-281MP/XN/EW

14

1234

DEH-2800MP/XN/EW

TUN_Lch

CD_Lch

RDS_LOCK

RDS_HSLK

RDS_CK

RDS_DATA

A,B,C

ELECTRONIC VOLUME/

SOURCE SELECTOR

1

IN1-L

2

IN2-L

5678

A

CN652

3

TUNPDO LDET TUNPDI SL TUNPCK CE1 CE2

Q401

Q402

IC151

PML014A

1

60

RESET

11

TUNPDI

61

LDET

12

TUNPDO

76

SL

13

TUNPCK

56

TUNPCE1

55

TUNPCE2

SYSTEM CONTROLLER

IC601(1/2) PE5517A:A,B,C PE5518A:D

58

RDSLK

59

RDS57K

62

RCK

57

RDT

6

Front_ L

7

Rear_ L

RESET

IC963

BD4834G

2

KEYD

STRKEY1

DALMON

BSENS

ASENS

VDD

2 1

47 80

VDD REGULATOR

VDD

32

64

63

BSENS

ASENS

Q911

BACKUP SENSE

Q931

Q912

B.UP

ACC

RLch

MUTE

Q352

CN352

2

CN901

ACC SENSE

POWER AMP

14

FLIn

12

RLIn

IC302 PAL007B(50W):A,B,C TDA7386(45W):D

22

MUTE

STBY

4

VCC

B.UP

6,20

23

FL-

21

FL+

3

RL-

5

RL+

BREM

A,B,C

25

BREM

FUSE

1

10A

3

2

10 12

9

11

6

WIRED REMOTE

1

BACK UP

3

ACC

2

GND

FL-

10

FL+

12

RL-

9

RL+

11

6

B.REM

A,B,C

B

C

SYSTEM CONTROLLER

IC601(2/2) PE5517A:A,B,C PE5518A:D

36

NC

VCK, VDT, VST

48

MUTE

43

SYSPW

49

ANTPW

70

X1

69

X2

21

SWVDD

66

SRC

65

DSENS

22

ILMPW

X601

12.58291MHz

VDD

SWVDD

B.UP

Q822

SWVDD

Q801

ILMPW

Q821

MUTE

Q452(2/2)

SWVDD

SOURCE

DSENS

VCC

MUTE

Q452(1/2)

(SYS 8V)

TUN3V

TUN 3V REG.

IC901

1

NJM2885DL1-33

6

3

SYSPW

B.REMOTE

IC551

TPD1018F

1

SYS 8V REG.

Q921

Q923

B.UP

BACK

UP

GND

ACC

REM

RR

+

FR

+

-

B.

FL

-

RL

-

D

FL

+

RL

+

D

KEYBOARD UNIT

B

CN1801CN831

SW5V

5

6

8

ILM

7

SOURCE

DSENS

ILL

S1805

SOURCE

5.1V

S1801

VOL+

S1807

VOL-

S1812

4ch/RDM

S1818 S1838

AUDIO

S1802

5ch/RPT

S1808

1ch

S1813 S1821

LEFT

S1819 S1829

EJECT

KEY MATRIX

S1803 S1825

BTB

S1809 S1839

CLOCK

S1814 S1822

DOWN

S1820 BAND

S1804

3ch

S1810

LOC

S1815 S1823

UP

S1826 S1827

DISP/LOUD

S1806

2ch

S1811

6ch/PAUSE

S1816 S1824

RIGHT

E

DPDT

KYDT

9

8

DPDT

KYDT

DPDT

4

KYDT

3

DEH-2800MP/XN/EW

56

18

DPDT

20

KYDT

7

KEY DATA

LCD DRIVER/

KEY CONTROLLER

IC1801

PD6340A

22

X0

X1801 5MHz

23

X1

F

LCD

8

15

A-a

A-b

A-a

A-b

A-a

R

1234

3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)(DEH-2800MP/XN/EW, DEH-2800MPB/XN/EW, DEH-2820MP/XN/EW)

Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or

A

"ELECTRICAL PARTS LIST".

Large size

A-b

SCH diagram

Guide page

Detailed page

A-a

C

CN901

B

C

SOURCE

FM/AM TUNER UNIT

PE5518A

D

ST

CDRESET

E

CN1801

B

NOTE :

Symbol indicates a resistor. No differentiation is made between chip resistors and discrete resistors.

Symbol indicates a capacitor. No differentiation is made between chip capacitors and discrete capacitors.

Decimal points for resistor and capacitor fixed values are expressed as :

←

2.2 2R2

←

0.022 R022

The > mark found on some component parts indicates

F

the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.

A

16

1234

DEH-2800MP/XN/EW

SOURCE

5678

A

A-b

TUNER AMP UNIT

A

B

>

CDRESET

STRKEY2

TDA7386 45W

600µH

CEK1208 10A

>

BACK

UP

GND

C

BACKUP

GND

ACC

B.REM

RL—

FL—

RL+

FL+

RR—

FR—

RR+

FR+

RR

+

FR

+

-

B.

FL

REM

+

RL

ACC

+

-

D

E

56

DEH-2800MP/XN/EW

F

A

7

8

17

A

A-b

1234

1 2 3

SOURCE

B

CN901

C

A-b

A-a

D

E

F

A-a

18

FM/AM TUNER UNIT

DEH-2800MP/XN/EW

1234

T

5678

A

4

STRKEY2

CDRESET

A-b

B

CN1801

B

←

Decimal points for resistor

and capacitor fixed values

are expressed as :

2.2 2R2

0.022 R022

The > mark found on some component parts indicates

the importance of the safety factor of the part.

Therefore, when replacing, be sure to use parts of

Symbol indicates a resistor.

No differentiation is made between chip resistors and

discrete resistors.

Symbol indicates a capacitor.

No differentiation is made between chip capacitors and

discrete capacitors.

NOTE :

identical designation.

A-b

A-a

C

D

E

FM/AM

F

A-a

56

DEH-2800MP/XN/EW

7

8

19

1234

A

BACKUP

GND

ACC

B.REM

>

CEK1208 10A

B

>

TUNER AMP UNIT

600µH

A

C

A-b

A-a

D

E

F

A-b

20

1 2 3

DEH-2800MP/XN/EW

1234

CEK1208 10A

BACKUP

>

5678

+

RR

-

RR

FR—

FL—

RL+

B.REM

RL—

GND

ACC

600µH

FR+

FL+

RR+

RR—

FR

BACK

RL

FL

-

RL

FL

B.

ACC

REM

UP

GND

A

B

A-b

A-a

C

D

E

4

DEH-2800MP/XN/EW

56

F

A-b

7

8

21

A-a

A-b

A-a

A-b

A-a

1234

3.3 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)(DEH-281MP/XN/EW)

Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or "ELECTRICAL PARTS LIST".

A

Large size

A-b

SCH diagram

Guide page

Detailed page

A-a

B

A-a

C

CN901

C

SOURCE

FM/AM TUNER UNIT

PE5518A

D

CDRESET

E

CN1801

B

NOTE :

Symbol indicates a resistor. No differentiation is made between chip resistors and discrete resistors.

Symbol indicates a capacitor. No differentiation is made between chip capacitors and discrete capacitors.

The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of

F

identical designation.

Decimal points for resistor and capacitor fixed values are expressed as :

←

2.2 2R2

←

0.022 R022

A

22

1234

DEH-2800MP/XN/EW

5678

A

A-b

TUNER AMP UNIT

A

01

B

>

SOURCE

CDRESET

STRKEY2

TDA7386 45W

600µH

CEK1208 10A

>

BACK

UP

GND

C

BACKUP

GND

ACC

B.REM

RL—

FL—

RL+

FL+

RR—

FR—

RR+

FR+

RR

+

FR

+

-

B.

FL

REM

+

RL

ACC

+

-

D

E

56

DEH-2800MP/XN/EW

F

A

7

8

23

A

A-b

1234

1 2 3

SOURCE

B

CN901

C

PE5518A

C

A-b

A-a

D

E

F

A-a

24

FM/AM TUNER UNIT

DEH-2800MP/XN/EW

1234

Pioneer DEH-2800MP, DEH-2820MP, DEH-281MP, CRT3555 Service manual

SAFETY INFORMATION

CONTENTS

1. SPECIFICATIONS

2. EXPLODED VIEWS AND PARTS LIST

2.1 PACKING

2.2 EXTERIOR

2.3 CD MECHANISM MODULE

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM

3.1 BLOCK DIAGRAM

3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)(DEH-2800MP/XN/EW, DEH-2800MPB/XN/EW, DEH-2820MP/XN/EW)

3.3 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)(DEH-281MP/XN/EW)