Pioneer CNSD-250FM, CNSD-200FM User Manual

Upgrade Instructions and
Operation Manual Addendum

2010 AVIC F-series Mapping upgrade

CNSD-250FM

2010 AVIC Mapping upgrade

CNSD-200FM

This software upgrade will result in changes to certain
features and availability of information. While the
changes are intended to improve the overall user
experience for most users, Pioneer and its licensors
disclaim any warranty or liability for damages in
connection with such changes.

English

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate
your model properly.

Important

! The screens shown in the examples may

differ from actual screens.

! Actual screens may be changed without

notice for performance and function im­provements.

Precaution

In case of trouble 3
Visit our website 3
SD memory card 3
Manual overview 3
Conventions used in this manual 3
Models to be upgraded 4

– To customers who have purchased the

CNSD-250FM 4

– To customers who have purchased the

CNSD-200FM 4

Renewed points through this upgrade 4

– For customers upgrading the hardware

for the first time 4

– For customers who have previously

upgraded the hardware 4

Setting items to be deleted and initialised by

upgrade 5

Licence agreement

PIONEER CNSD-250FM, CNSD-200FM 6
Whereis® Navigation Digital Road Map Data

Licence Terms 8

Licenses 10

About the database

About the data for the map database 15
Copyright 15

Preparation for upgrade 16

– Checking the device number 16
– Checking the current version 16
– Getting the password for

authentication 17

Upgrade procedures 17

– Upgrading the software programme

and the map database 17

– Checking whether the upgrade was

done properly 18

– Updating the Bluetooth wireless

technology software 19

Changes on the upgraded programme
Navigation functions 20

– Signpost and recommended lane 20
– Switching the map mode 20
– Hiding controls for tilt and rotation

angle 21

– Searching for POIs around the

address 21

AV functions 22

– Selecting a track from the list 22

Settings Menu 22

– Textured Polygons 22
– POI Settings 22
– Displayed Info 23
– Manage Track Logs 23
– Changes of default value 24

Restore Factory Settings 24

– Setting items to be deleted 25

Troubleshooting

Problems in the procedures for updating 27
Messages in the procedures for

updating 27

Instructions for upgrading
The navigation system upgrade process 16

2

Engb

Precaution

Chapter

01

! Read the entire manual before upgrading

the programme of your navigation system.

! This package is unique, and cannot be in-

stalled on more than one unit.

In case of trouble

! Should the navigation system fail to oper-

ate properly, contact your dealer or nearest
authorised Pioneer Service Station.

! Do not lose the supplied Media Number

Card (MEDIA NUMBER CARD). If the
Media Number Card is lost, reissue of the
Media Number (MEDIA NUMBER) is not
possible. Also you must submit the Media
Number Card when repairs are needed.
The card is necessary as proof of authenti­city if service is required (including re­covery).

Visit our website

Visit us at the following site:

http://www.pioneer.com.au

Please visit the website for any updated pro­duct or software information.

SD memory card

p Keep the SD memory card out of the reach

of small children to prevent them from ac­cidentally swallowing it.

p Do not store the SD memor y card in high

temperatures or direct sunlight.

p Do not subject the SD memory card to

shock or impact.

p Do not allow the SD memory card to come

into contact with liquids. Damage to the
SD memory card and your products could
result from contact with liquids.

p Be careful not to touch terminals on the

SD memory card. Doing so may cause con­nection failures. If any terminals are dirty,
wipe them with a clean dry cloth.

p SD Logo is a trademark of SD-3C, LLC.

Manual overview

This manual describes how to get the pass­word and activate the upgrade. It also provides
an overview of how functions change after the
upgrade.

Conventions used in this
manual

Before moving on, take a few minutes to read
the following information about the conven­tions used in this manual. Familiarity with
these conventions will help you greatly as you
learn how to use your new equipment.
! Buttons on your navigation system are de-

scribed in ALL CAPITAL, BOLD lettering:
e.g.)
With the map displayed, press the MENU
button.

! Items in different menus, screen titles, and

functional components are described in
bold with double quotation marks “”:
e.g.)
Displaying the “System Settings” screen

! Touch panel keys that are available on the

screen are described in bold in brackets [ ]:
e.g.)
Touch [Settings].

!

Extra information, alternatives and other
notes are presented in the following format:
e.g.)
p If the home location has not been stored

yet, set the location first.

! References are indicated like this:

e.g.)
= For details of the operation, refer to

Checking the device number on page

16.

Precaution

Engb

3

Chapter

01

Precaution

Models to be upgraded

To customers who have
purchased the CNSD-250FM

This package can upgrade the software pro­gramme and database of the following mod­els:

AVIC-F500BT

This package comes with upgrade SD memory
cards A and B.
The type of the upgrade SD memory card you
need to use depends on the state of your navi­gation system.
Check the following before using the upgrade
SD memory card.

Customers upgrading the hardware for
the first time

Use the upgrade SD memory card A.

Customers use the hardware upgraded
by CNSD-150FM

Use the upgrade SD memory card B.

To customers who have
purchased the CNSD-200FM

This package can upgrade the software pro­gramme and database of the following mod­els:

AVIC-F910BT, AVIC-F900BT

This package comes with upgrade SD memory
cards A and B.
The type of the upgrade SD memory card you
need to use depends on the state of your navi­gation system.
Check the following before using the upgrade
SD memory card.

Customers using AVIC-F900BT, and
customers upgrading their hardware
for the first time

Use the upgrade SD memory card A.

Customers using AVIC-F900BT, and
customers upgraded the hardware
with the CNSD-100FM

Use the upgrade SD memory card B.

Customers using AVIC-F910BT

Use the upgrade SD memory card B.

Renewed points through
this upgrade

For customers upgrading the
hardware for the first time

For customers using AVIC-F900BT

By upgrading the navigation system with this
product, the points described in this manual
are changed.

For customers using AVIC-F910BT

By upgrading the navigation system with this
product, following points are changed.

! Map database (including POI) is renewed.
! Device Number is displayed on the “Ser-

vice Information” screen.

The other operations are essentially the same
as those at the time you purchased the hard­ware. Use the Operation Manual included in
the hardware package as your primary refer­ence.

For customers who have
previously upgraded the hardware

By upgrading the navigation system with this
product, following points are changed.

! Map database (including POI) is renewed.
! Device Number is displayed on the “Ser-

vice Information” screen.

The other operations are essentially the same
as those at the time you previously upgraded.
Use the Operation Manual included in the
hardware package as your primary reference,
and also read the manuals supplied with the
upgrade packages already installed in your
hardware.

4

Engb

Precaution

Chapter

01

Setting items to be deleted and initialised by upgrade

The following data and settings will be cleared and reset to default values. Other items will be retained. How­ever, some items are not listed because the setting can be easily recovered by users, such as the last map
scale, the last status of AV operation screen, etc.

Navigation functions

All settings on “TMC Control Centre”

“History” on “Address”

Destination Menu

Navi Settings All settings

System Settings All settings

Others

Audio functions

AV Settings All settings

SD, USB All settings (*1)

Volume setting for AV sources, EQ settings (*2)

(*1) All settings including the setting on the “Function” menu are deleted.
(*2) These settings are cleared only if you use AVIC-F500BT.

History

Favourites

“Saved Criteria” on “POI”

Pin icon data

Speed camera data

Anti-theft password

Precaution

The user data stored in the internal memory of the unit may be erased if an unexpected error occurs during
software installation. Pioneer is not responsible for any data loss or unavailability of user data.

Engb

5

Chapter

02

Licence agreement

PIONEER CNSD-250FM,
CNSD-200FM

THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
CORP. (JAPAN) (“PIONEER”). PLEASE READ
THE TERMS AND CONDITIONS OF THIS
AGREEMENT CAREFULLY BEFORE USING
THE SOFTWARE INSTALLED ON THE
PIONEER PRODUCTS. BY USING THE SOFT­WARE INSTALLED ON THE PIONEER PRO­DUCTS, YOU AGREE TO BE BOUND BY THE
TERMS OF THIS AGREEMENT. THE SOFT­WARE INCLUDES A DATABASE LICENSED BY
THIRD PARTY SUPPLIER(S) (“SUPPLIERS”),
AND YOUR USE OF THE DATABASE IS COV­ERED BY THE SUPPLIERS’ SEPARATE
TERMS, WHICH ARE ATTACHED TO THIS
AGREEMENT (refer to page 8). IF YOU DO NOT
AGREE WITH ALL OF THESE TERMS, PLEASE
RETURN THE PIONEER PRODUCTS (INCLUD­ING THE SOFTWARE, AND ANY WRIT TEN MA­TERIALS) WITHIN FIVE (5) DAYS OF RECEIPT
OF THE PRODUCTS, TO THE AUTHORISED
PIONEER DEALER FROM WHICH YOU PUR­CHASED THEM.

1 GRANT OF LICENCE

Pioneer grants to you a non-transferable, non­exclusive licence to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi­ness, only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicence, market
or otherwise transfer the Software or use it in
any manner not expressly authorised by this
agreement. You shall not derive or attempt to
derive the source code or structure of all or
any portion of the Software by reverse engi­neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use

involving the processing of data for other per­sons or entities.
Pioneer and its licensor(s) shall retain all copy­right, trade secret, patent and other proprie­tary ownership rights in the Software. The
Software is copyrighted and may not be cop­ied, even if modified or merged with other pro­ducts. You shall not alter or remove any
copyright notice or proprietary legend con­tained in or on the Software.
You may transfer all of your licence rights in
the Software, the related documentation and a
copy of this Licence Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li­cence Agreement.

2 DISCLAIMER OF WARRANTY

The Software and related documentation are
provided to you “AS IS”. PIONEER AND ITS LI­CENSOR(S) (for the purpose of provisions 2
and 3, Pioneer and its licensor(s) shall be col­lectively referred to as “Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY, WHETHER EX­PRESS OR IMPLIED, AND ALL WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
ANY PARTICULAR PURPOSE ARE EX­PRESSLY EXCLUDED. SOME COUNTRIES DO
NOT ALLOW EXCLUSION OF IMPLIED WAR­RANTIES, SO THE ABOVE EXCLUSION MAY
NOT APPLY TO YOU. The Software is complex
and may contain some non-conformities, de­fects or errors. Pioneer does not warrant that
the Software will meet your needs or expecta­tions, that operation of the Software will be
error free or uninterrupted, or that all non-con­formities can or will be corrected. Further­more, Pioneer does not make any
representations or warranties regarding the
use or results of the use of the Software in
terms of its accuracy, reliability or otherwise.

6

Engb

Licence agreement

Chapter

02

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN­CURRED BY YOU (INCLUDING, WITHOUT LIM­ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
SALES OR BUSINESS, EXPENDITURES, IN­VESTMENTS, OR COMMITMENTS IN CON­NECTION WITH ANY BUSINESS, LOSS OF
ANY GOODWILL, OR DAMAGES) RESULTING
FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ALL CAUSES OF ACTION IN THE AGGRE­GATE, INCLUDING WITHOUT LIMITATION
BREACH OF CONTRACT, BREACH OF WAR­RANTY, NEGLIGENCE, STRICT LIABILITY, MIS­REPRESENTATION, AND OTHER TORTS. IF
PIONEER’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50%) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO­DUCT.
Some countries do not allow the exclusion or
limitation of incidental or consequential da­mages, so the above limitation or exclusion
may not apply to you. This warranty disclaimer
and limitation of liability shall not be applic­able to the extent that any provision of this
warranty is prohibited by any country or local
law which cannot be pre-empted.

laws and regulations of the Government. If the
Software has been rightfully obtained by you
outside of the Country, you agree that you will
not re-export the Software nor any other tech­nical data received from Pioneer, nor the di­rect product thereof, except as permitted by
the laws and regulations of the Government
and the laws and regulations of the jurisdic­tion in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated.
You may terminate it at any time by destroying
the Software. The Agreement also will termi­nate if you do not comply with any terms or
conditions of this Agreement. Upon such ter­mination, you agree to destroy the Software.

6 MISCELLANEOUS

This is the entire Agreement between Pioneer
and you regarding its subject matter. No
change in this Agreement shall be effective
unless agreed to in writing by Pioneer. If any
provision of this Agreement is declared invalid
or unenforceable, the remaining provisions of
this Agreement shall remain in full force and
effect.

Licence agreement

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software
nor any other technical data received from
Pioneer, nor the direct product thereof, will be
exported outside the country or district (the
“Country”) governed by the government having
jurisdiction over you (the “Government”) ex­cept as authorised and as permitted by the

Engb

7

Chapter

02

Licence agreement

Whereis®Navigation Digital
Road Map Data Licence Terms

IMPORTANT

To protect your own interests, please read these
terms and conditions carefully before you remove
the sticker from the package containing this pro­duct which contains the Whereis
(“Data”)(“Product”). If you are uncertain as to
your rights and obligations under this Licence or
you would like any explanation about them please
contact Sensis Pty Ltd (ABN 30 007 423 912)
(“Sensis”) on 1800 819 471. Your licence from Sen­sis to use the Product (“Licence”) is subject to the
terms and conditions set out below. If you do not
agree to these terms and conditions, return this
package to your place of purchase or call 1800
819 471.

1 GRANT OF LICENCE

1.1

Telstra Corporation Limited (ABN 33 051
775 556) through its agent Sensis grants
you a non-exclusive, non-transferable li­cence (with no rights to sub-licence) to
use the Product on the terms and condi­tions contained in this Licence.

1.2

The Licence commences on the date you
remove the sticker from the packaging of
the Product and continues until the Li­cence ends in accordance with the
terms and conditions set out below.

2 RIGHTS OF USE

2.1

You may:

a use the Product on any compatible vehicle

navigation system; and

b only use the Product for personal use.

2.2

You must not reproduce, reverse com­pile, adapt, modify, assign, distribute or
publish in any form the whole or any part
of the Product.

2.3

You must take all reasonable steps to
prevent any of the events in clause 2.2
occurring or any unauthorised copying
or use of the Product, and must immedi­ately notify Sensis if you become aware
of any of these events occurring or of any

®

mapping data

other infringement of Sensis’ rights in re­lation to the Product.

3 PROPERTY AND OWNERSHIP

3.1

All intellectual property rights (including
copyright) in and to the Product (includ­ing the Data) are the sole and exclusive
property of Sensis (or its Licensors) and
except for the rights granted to you in
this Licence, you will not acquire any in­tellectual property or other rights in or to
the Product or any part of the Product.
The Product incorporates data which is
© Commonwealth of Australia
(Geoscience Australia) 2009. (This data
has been used with the permission of
Geoscience Australia. Geoscience Aus­tralia has not evaluated this data as al­tered and incorporated within this device
and therefore gives no warranty regard­ing its accuracy, completeness, currency
or suitability for any particular purpose).
Melbourne data includes information
sourced from the Department of Treasury
and Finance, Geographic Data Victoria.

4 ACCURACY OF DATA

4.1

Sensis will use reasonable care and skill
in providing the Product and will provide
the Product to you in accordance with
this Licence. However, given the nature
of navigation systems (including the pos­sibility that a change in traffic conditions
could affect the accuracy of the Data)
and the act that Sensis must obtain
some of the Data from other sources,
Sensis cannot promise that the Data will
be error free, complete or up to date.

5 SENSIS’ LIABILITY TO YOU

5.1

The terms and conditions that apply to
the supply and use of the Product are
those that are expressly set out in this Li­cence and those implied by consumer
protection laws to the supply and use of
the Product that are unable to be ex­cluded. No other terms apply.

8

Engb

Licence agreement

Chapter

02

5.2

Subject to clause 5.3, Sensis accepts its
liability to you for breach of these terms
and conditions or negligence under the
principles applied by the courts.

5.3

The Product is provided to you for the pri­mary purpose of personal, domestic or
household use, so Sensis does not ac­cept liability to you for losses that result
from the use of the Product in connec­tion with the conduct of a business.
However, Sensis will accept that liability
if it cannot be excluded under any legis­lation. Sensis is also not liable for any
loss to the extent that it is caused by you,
for example, through your negligence or
breach of these terms and conditions.

5.4

Sensis is not liable for failing to comply
with the terms and conditions applying
to the Product where that failure is
caused by events outside Sensis’ reason­able control, such as abuse or misuse of
the Product, damage to the Product
caused by faults in equipment that is not
owned by Sensis, any accident by you or
a third party which damages the Product
or any unusual hazards affecting the Pro­duct (including exposure to excessive hu­midity, heat, cold, dust, food or liquids).

ii providing the Licence becomes illegal or

Sensis believes on reasonable grounds that
it may become illegal.

7.3

Your rights under this Licence will end as
soon as this Licence is cancelled. Follow­ing cancellation, you will also need to re­turn the Product and any copy of the
Product to Sensis at your expense. Sen­sis may ask for proof that the Product
and all such copies have been returned.

7.4

Any rights or remedies which existed be­fore cancellation will continue to exist
after cancellation.

8 GENERAL

8.1

A provision of, or a right under, this Li­cence may not be waived except in writ­ing signed by the party that is waiving
the provision or right.

8.2

This Licence will be governed by the laws
in force in Victoria, Australia.

8.3

A reference to a person in this Licence
includes a reference to a firm, corpora­tion or other corporate body.

Licence agreement

6 YOUR LIABILITY TO SENSIS

6.1

Subject to clause 6.2, you are liable to
Sensis for breach of these terms and
conditions or negligence under the prin­ciples applied by the courts.

6.2

You are not liable for any loss to the ex­tent that it is caused by Sensis, for exam­ple, through Sensis’ negligence or
breach of these terms and conditions.

7 CANCELLING THE LICENCE

7.1

Sensis may cancel the Licence immedi­ately by giving you notice if you are in
breach of these terms and conditions.

7.2

Sensis may also cancel the Licence by
giving you as much notice as is reason­ably possible if:

i the law requires Sensis to do so; or

Engb

9