Pioneer CNDV-110MT User Manual

Operation Manual Addendum

2012 DVD NAVIGATION UPGRADE DISC

CNDV-110MT

This software upgrade will result in changes to certain
features and availability of information. While the
changes are intended to improve the overall user
experience for most users, Pioneer and its licensors
disclaim any warranty or liability for damages in
connection with such changes.

English

PIONEER CORPORATION

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: [phone]

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: [phone]

© 2012 PIONEER CORPORATION.
All rights reserved.

Printed in Belgium

<CRB3945-A> EU

13-MAN-CNDV-110-GB

<KYTZX> <12E00000>

! Read the entire manual before upgrading

the programme of your navigation system.

! The screens shown in the examples may

differ from the actual screens.
The actual screens may be changed with­out notice for performance and function
improvements.

Models to be upgraded

This package can upgrade the software pro­gramme and database of the following mod­els:
AVIC-D3, AVIC-X3

II

, AVIC-X3, AVIC-X1BT, AVIC-

X1R, AVIC-X1

Manual overview

This manual is a supplementary document
that summarises the points that will be re­newed after upgrading your navigation system
by using CNDV-110MT.

For customers using AVIC-D3,
AVIC-X3, AVIC-X3

II

, CNDV-80MT,

CNDV-90MTor CNDV-100MT

By upgrading the navigation system with this
disc, following points are changed.

! Map database
! Background images (Only for AVIC-D3)

The other operations are essentially the same
as those at the time you purchased the hard­ware. Use Operation Manual included in the
hardware package as your primary reference.

For customers using AVIC-X1R,
AVIC-X1BT, CNDV-60M or CNDV­70M

Only the map database changes to the latest
data (all the operations are the same before).
Even if you upgrade AVIC-X1R with this disc,
the following AV functions do not become the
same as AVIC-X1BT.

! The functions on the hardware buttons
! Hands-free phoning with Bluetooth wire-

less technology (TEL source)
! The functions for iPod
The other operations are essentially the same
as those at the time you purchased the hard­ware. Use Operation Manual included in the
hardware package as your primary reference.

For customers using AVIC-X1

By upgrading AVIC-X1 with this disc, many
changes will take place including changes to
the menu configuration. For the operations
other than those described in this manual, ob­tain the Operation Manual for AVIC-X1R and
use it as your primary reference.
Even if you upgrade AVIC-X1 with this disc, the
following AV functions do not become the
same as AVIC-X1BT.

! The functions on the hardware buttons
! Hands-free phoning with Bluetooth wire-

less technology (TEL source)
! The functions for iPod
p If you have already upgraded your AVIC-X1

by using CNDV-50MT, you do not need to

obtain the Operation Manual for AVIC-X1R.

Use the Operation Manual supplied with

CNDV-50MT as your primary reference.

Obtain the manual by downloading
it via Web

Visit us at the following site:

http://www.pioneer.eu

p Download the manual if desired.

Engb

Precaution

If you cannot get the manual via Web

Obtain the manual by
! sending an E-mail to:

[e-mail]

! writing a letter to:

Pioneer Europe NV, European Service Divi­sion
Haven 1087, Keetberglaan 1, B-9120 Mel­sele, Belgium/Belgique

Be sure to read the
following descriptions

Licence agreement

This provides a licence agreement of this soft­ware. Be sure to read this before using the
software.

About the database

This provides some notes for the map data­base and the date when it was recorded.

Other precautions

This provides the important precautions for
using this software.

PIONEER CNDV-110MT

THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
CORP. (JAPAN) (“PIONEER”). PLEASE READ
THE TERMS AND CONDITIONS OF THIS
AGREEMENT CAREFULLY BEFORE USING
THE SOFTWARE INSTALLED ON THE
PIONEER PRODUCTS. BY USING THE SOFT­WARE INSTALLED ON THE PIONEER PRO­DUCTS, YOU AGREE TO BE BOUND BY THE
TERMS OF THIS AGREEMENT. THE SOFT­WARE INCLUDES A DATABASE LICENCED BY
THIRD PARTY SUPPLIER(S) (“SUPPLIERS”),
AND YOUR USE OF THE DATABASE IS COV­ERED BY THE SUPPLIERS’ SEPARATE
TERMS, WHICH ARE ATTACHED TO THIS
AGREEMENT (refer to TERMS AND CONDI-
TIONS FOR THE TOMTOM DATA). IF YOU DO
NOT AGREE WITH ALL OF THESE TERMS,
PLEASE RETURN THE PIONEER PRODUCTS
(INCLUDING THE SOFTWARE, AND ANY
WRITTEN MATERIALS) WITHIN FIVE (5) DAYS
OF RECEIPT OF THE PRODUCTS, TO THE
AUTHORISED PIONEER DEALER FROM
WHICH YOU PURCHASED THEM.

1 GRANT OF LICENCE

Pioneer grants to you a non-transferable, non­exclusive licence to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi­ness, only on such Pioneer products.

Engb

Precaution Licence agreement

You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicence, market
or otherwise transfer the Software or use it in
any manner not expressly authorised by this
agreement. You shall not derive or attempt to
derive the source code or structure of all or
any portion of the Software by reverse engi­neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use
involving the processing of data for other per­sons or entities.
Pioneer and its licensor(s) shall retain all copy­right, trade secret, patent and other proprie­tary ownership rights in the Software. The
Software is copyrighted and may not be cop­ied, even if modified or merged with other pro­ducts. You shall not alter or remove any
copyright notice or proprietary legend con­tained in or on the Software.
You may transfer all of your licence rights in
the Software, the related documentation and a
copy of this Licence Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li­cence Agreement.

2 DISCLAIMER OF WARRANTY

The Software and related documentation are
provided to you “AS IS”. PIONEER AND ITS LI­CENSOR(S) (for the purpose of provisions 2
and 3, Pioneer and its licensor(s) shall be col­lectively referred to as “Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY, WHETHER EX­PRESS OR IMPLIED, AND ALL WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
ANY PARTICULAR PURPOSE ARE EX­PRESSLY EXCLUDED. SOME COUNTRIES DO
NOT ALLOW EXCLUSION OF IMPLIED WAR­RANTIES, SO THE ABOVE EXCLUSION MAY
NOT APPLY TO YOU. The Software is complex
and may contain some nonconformities, de­fects or errors. Pioneer does not warrant that

the Software will meet your needs or expecta­tions, that operation of the Software will be
error free or uninterrupted, or that all noncon­formities can or will be corrected. Further­more, Pioneer does not make any
representations or warranties regarding the
use or results of the use of the Software in
terms of its accuracy, reliability or otherwise.

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN­CURRED BY YOU (INCLUDING, WITHOUT LIM­ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
SALES OR BUSINESS, EXPENDITURES, IN­VESTMENTS, OR COMMITMENTS IN CON­NECTION WITH ANY BUSINESS, LOSS OF
ANY GOODWILL, OR DAMAGES) RESULTING
FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ALL CAUSES OF ACTION IN THE AGGRE­GATE, INCLUDING WITHOUT LIMITATION
BREACH OF CONTRACT, BREACH OF WAR­RANTY, NEGLIGENCE, STRICT LIABILITY, MIS­REPRESENTATION, AND OTHER TORTS. IF
PIONEER’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50 %) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO­DUCT.

Engb

Licence agreement

Some countries do not allow the exclusion or
limitation of incidental or consequential da­mages, so the above limitation or exclusion
may not apply to you. This warranty disclaimer
and limitation of liability shall not be applic­able to the extent that any provision of this
warranty is prohibited by any country or local
law which cannot be pre-empted.

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software
nor any other technical data received from
Pioneer, nor the direct product thereof, will be
exported outside the country or district (the
“Country”) governed by the government having
jurisdiction over you (the “Government”) ex­cept as authorised and as permitted by the
laws and regulations of the Government. If the
Software has been rightfully obtained by you
outside of the Country, you agree that you will
not re-export the Software nor any other tech­nical data received from Pioneer, nor the di­rect product thereof, except as permitted by
the laws and regulations of the Government
and the laws and regulations of the jurisdic­tion in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated.
You may terminate it at any time by destroying
the Software. The Agreement also will termi­nate if you do not comply with any terms or
conditions of this Agreement. Upon such ter­mination, you agree to destroy the Software.

6 MISCELLANEOUS

This is the entire Agreement between Pioneer
and you regarding its subject matter. No
change in this Agreement shall be effective
unless agreed to in writing by Pioneer. If any
provision of this Agreement is declared invalid
or unenforceable, the remaining provisions of
this Agreement shall remain in full force and
effect.

Engb

Licence agreement

TERMS AND CONDITIONS FOR THE TOMTOM DATA

Engb

Licence agreement

Engb

Licence agreement

Engb

Licence agreement

About the database

About the data for the map
database

! Modifications related to roads, streets/high-

ways, terrain, construction and other things
before/during the development period may
not be reflected in this database. Inevitably,
those modifications after that period are
not reflected in this database.

! Regardless of existing and newly-built

things, the data may be different from the
actual condition.

! For details about the map coverage of this

navigation system, refer to the information
on our website.

! It is strictly prohibited to reproduce and use

any part or the whole of this map in any
form without permission from the copyright
owner.

! If the local traffic regulations or conditions

deviate from this data, follow the local traf­fic regulations (such as signs, indications,
etc.) and conditions (such as construction,
weather, etc.).

! The traffic regulation data used in the map

database applies only to standard sized
passenger vehicles. Note that regulations
for larger vehicles, motorbikes, and other
non-standard vehicles are not included in
the database.

! TomTom Map Version, Rel. 06/2011.

! © 2012 TomTom. All rights reserved. Tom-

Tom and the TomTom logo are registered
trademarks of TomTom N.V.

! © 2012 INCREMENT P CORP. ALL RIGHTS

RESERVED.

In case of trouble

Should the navigation system fail to operate
properly, contact your dealer or nearest
authorised Pioneer Service Station.

Visit our website

Visit us at the following site:

http://www.pioneer.eu

! Register your product. We will keep the de-

tails of your purchase on file to help you

refer to this information in the event of an

insurance claim such as loss or theft.
! We offer the latest information about

PIONEER CORPORATION on our

website.

Engb

Other precautions

If you upgrade your navigation system by
these discs, the system will have the following
changes.

Renewed points for all models

Renewal Map database

The Map database will be changed.

Wide variety of facility
information for Points of
Interest (POI) search

Approximately 2 million POIs are included in
the database.
! The categories that you can use for voice

recognition also will be changed. To know
the categories that you can vocalize, see
the displayed voice help.

! Some facilities icons used in POI Search,

Vicinity Search, and Overlay POI will be

changed.

Triple Disc

This package is adopted “Triple Disc” system
so as to contain larger database and expanded
coverage area; for the west, for the central,
and for the east.
You can use a disc according to current loca­tion or destination, so that you can get comfor­table operation at the long-distance
navigation.

Configuration of data recorded on discs

Due to expanding the map database and the
limitations of the disc’s storage capacity, the
following contents in the Central area disc
have been changed.

! Search data for Austria and Denmark

are deleted.

The search data for Austria and Denmark
are deleted from the Central area disc and
become available only on the East area
disc. To search maps of Austria or Den­mark, use the East area disc.

! The coverage of lower scale maps on

the Central area disc is reduced.

The coverage of lower scale maps of the
northern and eastern borders on the Cen­tral area disc is reduced.

The database and lower scale maps stored on
each disc are as follows:

West area disc Central area disc

East area disc

Engb

Renewed points through
this upgrade

Note for cross-disc routing

If your current location and the destination are
stored on different discs, it is necessary to
change discs on the way.
In the case of such cross-disc routing, the fol­lowing procedure is recommended.

1 Insert the disc containing the destina­tion you want to set.

2 Search for the destination and set as
your destination.

3 After route calculation finished, re­move the current disc.

4 Insert the disc containing your current
location.

p The navigation system reboots automati-

cally remembering your destination and
route set.

p To play DVD-video or CD, remove the DVD

Map Disc after the “Memory navi indicator”
stops flashing.

5 Drive toward your destination.

p When you approach the areas not stored on

the current disc, the navigation system in­forms you of approaching that area. Re­place the disc at that time.

p Removing the disc and inserting another

disc causes the navigation system to auto ­matically restart and reload the new route.
(This automatic “Reroute” operation cannot
be cancelled.)

Renewed points for AVIC­X1 or AVIC-X1R

Changes to appearance

The appearance of the navigation menu and
AV menu will change as follows:

Navigation menu

AV menu

Renewed points for AV source

Source icon

The icon design for each source will be chan­ged.

[ESC] touch key

The name of some of the touch keys will be
changed from [ESC]to[HIDE].

Renewed point in the MP3 operation
screen

The folder icon will be added to the [UP] touch
key.
The file extension (.mp3) will be displayed after
a track in the track list display and detail Infor­mation display. (The extension may not be dis­played if the file name is long.)

Engb

Renewed points through
this upgrade

Easy operation for expanded
coverage (Country selection table)

The screen to select a country you want to
search during a search step (“Country selec­tion table”) will be changed to a table format
to comply with expanded coverage area. Se­lect a country you want to search from the
table.

Selected country

Country codes

Limitation of Functions for
Areas not Stored on the Disc

For areas not stored on the disc, the functions
will operate as follows:

Displaying the map

! Maps with a scale of between 25 m and

200 m cannot be displayed. (If the scale
was set to between 25 m and 200 m, it is
automatically switched to 500 m.)

! When driving with Mixed Mode, St.List

Mode or Driver’s View, upon entering an

area not stored on the disc the display
automatically switches to Map Mode.
(When the vehicle reenters an area stored
on the disc, the display returns to the pre­vious map mode except for Driver’s View.)

Destination search

! You cannot search a destination in an area

not stored on the disc using Address

Search, POI Search, Vicinity Search or

Postal Code Search.

! If you cannot search in a currently selected

country, the system may forcibly switch to

the country selection screen.
! A Motorway Search covers all areas, re-

gardless of the disc on which the informa-

tion is stored.
! If a Vicinity Search is performed on the

border of an area not stored on the disc,

the system will not necessarily select the

nearest facility. (The search will take place

only within the range of areas stored on the

disc.)

Guidance

! When your vehicle approaches an area not

stored on the disc, you will be notified three

times: when the distance to the area not

stored on the disc is 20 km (12 miles),

10 km (6 miles) and 5 km (3 miles) respec-

tively. When your vehicle enters that area, a

caution is given.
! In the areas not stored on the disc, only

guidance for reaching the destination is

provided. No other guidance is given.
! If a route calculation is operated within an

areas not stored on the disc, the route

might not be set from the streets you are

currently driving. Also, if you set the desti-

nation in an area not stored on the disc of

the disc, the system may not be able to set

the route up to the destination.
! If the vehicle deviates from the set route in

an area not stored on the disc, the Auto Re-

route function will not work.
! Even if “Close-up of Junction” is “On”, the

display will not switch to an enlarged map

of the junction.
! Even if you drive on the motorway, lane in-

formation, motorway exit numbers and mo-

torway signs will not be displayed.

Engb

Renewed points through
this upgrade

Route information

! If the set route goes through an area not

stored on the disc, no route profile for that
area will be displayed. (If the set route tra­verses both an area not stored on the disc
and area stored on the disc, only the route
profile within the area stored on the disc
will be displayed.)

! Route scrolling for an area not stored on

the disc is possible only with a map scale
of 500 m or above.

Other function limitations

Memory mode

! Only data for areas stored on the disc can

be memorised. (Data for areas not stored
on the disc cannot be memorised.)

! If the vehicle enters an area not stored on

the disc, preparation for memory navi
mode will have to be redone after the vehi­cle returns to an area stored in the disc.
(Preparation for the memory navi mode
starts from the location where the vehicle
re-entered the area stored on the disc.)

Avoid area

An area not stored on the disc cannot be set
as an Area to Avoid.
p A set Areas to Avoid may be deleted when

the software is updated. If this happens,
the system will automatically try to recover
the deleted information, but data can be re­covered only for areas stored on the disc.
For items that could not be recovered, a re­covery process will begin when you set an­other disc.

Recovery process for memory navi
and avoid area

The memorised area may be deleted in the fol­lowing circumstances:

! Yellow lead of the navigation system or the

vehicle battery is disconnected.

! RESET button is pressed.
! Navigation software is updated.

p In these circumstances, the system will

automatically try to recover the deleted in-

formation, but data can be recovered only

for areas stored on the disc. For items that

could not be recovered, a recovery process

will begin when you set another disc.

Light grey touch panel key

The function is not available during memory
navi mode. Or, the function is not available for
areas not stored on the disc.
Touching this button activates a message indi­cating that the function is not available.
In memory navi mode and/or when traversing
an area not stored on the disc, selection of the
scales is limited.

Engb

Renewed points through
this upgrade

The following messages are added to those of AVIC-X1R (CNDV-50MT):

Message When What to do

This area does not contain any
POI’s of the selected type.

Vicinity Search cannot be per-

formed because the searched loca­tion is in areas not stored on the
DVD Map Disc.

Replace the DVD Map Disc and per­form Vicinity Search again.

This country is not available on
the disc. Please insert an appropri­ate disc.

When countries not stored on the
DVD Map Disc are included in the
search.

Set the destination or way point(s) in
the countries stored on the DVD
Map Disc, or replace the DVD Map
Disc and perform the search again.

Failed to make the route profile. Failed to generate the route profile

because the set route passes
through areas not stored on the DVD
Map Disc.

Insert the DVD Map Disc and retry.

No route data can be stored. You
should insert the disc that con­tains the map data of the current
position.

The area to be set for [Map in Mem­ory]is“areas not stored on the DVD

Map Disc”.

• Change the memor y area to be set

to “areas stored on the DVD Map
Disc”.

• Insert the DVD Map Disc contain­ing that area.

•Scaling down.

•Scaling up.

In the memory navi mode, if the DVD
Map Disc is inserted without chan­ging the scale (only when the point
is stored on the DVD Map Disc).

The scale automatically returns to
the scale that was set in the DVD
navi mode before being changed to
the memory navi mode.

• No map data available on this
scale. Scaling up.

• No map data available on this
scale. Scaling down.

When the scale that had been pre­viously displayed cannot be dis­played for the following reasons:

• The disc was ejected and the sys­tem was changed to the memory
navi mode.

• In the memor y navi mode, the map
was scrolled to outside the memory
area. Or, the vehicle moved outside
of the memory area.

• The map was scrolled to areas not
stored on the DVD Map Disc. Or, the
vehicle moved to unrecorded areas.

• The map was scrolled from unrec­orded areas to the memor y area. Or,
the vehicle moved from unrecorded
areas to the memory area.

If the desired scale cannot be se­lected, insert the DVD Map Disc that
contains that area and then change
the scale.

Failure in the memory recovery
process. Memory navigation is
presently not possible.

Failed to complete the recovery of
the memory area because the disc
could not be read for some reason,
resulting in deletion of the memor y.

• Clean the disc.

• Clean the DVD drive.

• Consult the Pioneer Local dealer if

this message persists.

This function is not available with
the current map disc.

The current position is “areas not
stored on the DVD Map Disc” and an
attempt was made to zoom in to
make the scale 500 m or more.

Zoom in again after the vehicle
moves into an area stored on the
DVD Map Disc.
Or, replace the DVD Map Disc and
try to zoom in again.

Engb

Messages and how to
react to them

The programme is installed to the navigation
system using the application disc.
When installing the programme, you carry out
the following operations. When all the setup
procedures are completed, you can use the
navigation system.
The screen images used in this section are
AVIC-X1R as an example.

CAUTION
You cannot go back to the previous (pre­upgrade) version of the application after
the software upgrade is completed. Also,
the map discs that were previously used
cannot be used. Instead, use the CNDV­110MT DVDs as your new map discs.

1 Park your vehicle in a safe place.

Leave the engine on, and make sure that the
handbrake is applied.

2 Press EJECT button to remove the cur­rent disc.

3 Insert the new Pioneer DVD Map Disc
into the appropriate slot.

When the upgraded programme has been
found, installation of the programme starts im­mediately.

p If you cannot insert a disc completely or if

an inserted disc is not recognised, check
that the label side of the disc is up. Press
EJECT button to eject the disc, and check
the disc for damage before inserting the
disc again.

CAUTION
While this screen is visible, NEVER switch the
ignition key position or turn off the power of na­vigation system.

When the installation is complete, the opening
display appears.

p By upgrading AVIC-X1 or AVIC-X1BT with

these discs, the same screen appears.

p By upgrading other models with these

discs, the following opening display ap­pears.

Engb

Instructions for
upgrading

4 Press the NAVI/AV button to change
the navigation screen.

Some time is needed until navigation is ready.

5 Check the details of the caution mes­sage and touch [OK].

The map of your surroundings is displayed.
You can operate the navigation system by
touching keys displayed on the screen as
usual.

When upgrading AVIC-X1, perform the following pro­cedure.

6 To set the time difference, touch [+] or
[–].

Time difference

The time difference between the time origin­ally set in the navigation system (Central Eur­opean Time) and the current location of your
vehicle is shown. If necessary, adjust the time
difference. Touching [+]or[–] changes the
time difference display in one-hour incre­ments. The time difference can be set from +3
to –3 hours.

7 If necessary, set to summer time.

Summer time setting is off by default. Touch
[Summer Time] to change the setting if you
are in the summer time period.

8 To complete the setting, touch [Back].

The map of your surroundings appears.

Engb

Instructions for
upgrading