Pioneer CNDV-100MT User Manual

Operation Manual Addendum

2010 TOUCH OPERATION DISC

CNDV-100MT

This software upgrade will result in changes to certain
features and availability of information. While the
changes are intended to improve the overall user
experience for most users, Pioneer and its licensors
disclaim any warranty or liability for damages in
connection with such changes.

This software requires that the navigation unit be
properly connected to your vehicle’s parking brake. If
not properly connected and depending on your vehicle,
additional installation may be required. For more
information, please contact your Authorized Pioneer
Electronics retailer or call us at 800-421-1404.

English

PIONEER CORPORATION

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: [phone]

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: [phone]

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936
TEL: [phone]

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: [phone]

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
TEL: [phone]
TEL: [phone]

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: [phone]

先鋒股份有限公司

總公司 : 台北市中山北路二段44號13樓

電話 : [phone]

先鋒電子（香港）有限公司

香港九龍尖沙咀海港城世界商業中心9樓901-6室

電話 : [phone]

Published by Pioneer Corporation.
Copyright © 2010 by Pioneer Corporation.
All rights reserved.

Printed in Japan

<IRB1020-A> UC

<KYTZF> <10E00000>

! Read the entire manual before upgrading

the program of your navigation system.

! The screens shown in the examples may

differ from the actual screens.
The actual screens may be changed with­out notice for performance and function
improvements.

Models to be upgraded

This package can upgrade the software pro­gram and database of the following models:
AVIC-D1, AVIC-D2, AVIC-D3, AVIC-N1, AVIC­N2, AVIC-N3, AVIC-N4, AVIC-N5

Manual overview

This manual is a supplementary document
that summarises the points that will be re­newed after upgrading your navigation system
by using CNDV-100MT.

For customers using AVIC-D3,
AVIC-N4, AVIC-N5, CNDV-70MTP,
CNDV-80MTor CNDV-90MT

By upgrading the navigation system with
these discs, the points described in this man­ual are changed.

! Map database
! Background images (Only for AVIC-D3)
! XM Satellite Radio in the lineup and icon of

the broadcast station
The other operations are essentially the same
as those at the time you purchased the hard­ware. Use the Operation Manual included in
the hardware package as your primary refer­ence.

For customers using AVIC-N2,
AVIC-N3, AVIC-D1, AVIC-D2 or
CNDV-60M (CNDV-60MP)

By upgrading the navigation system with
these discs, following points are changed.

! Map database
! XM Satellite Radio in the lineup and icon of

the broadcast station
The other operations are essentially the same
as those at the time you purchased the hard­ware. Use the Operation Manual included in
the hardware package as your primary refer­ence.
Even if you upgrade AVIC-N2 with these discs,
the following AV functions do not become the
same as AVIC-N3.

! The functions on the hardware buttons
! The functions for iPod
! The functions for SIRIUS Satellite Radio
! The functions for XM Satellite Radio

For customers using AVIC-N1 or
CNDV-50MT (CNDV-50MTP)

By upgrading AVIC-N1 with these discs, many
changes will take place including changes to
the menu configuration. For the operations
other than those described in this manual, ob­tain the Operation Manual for AVIC-N2 and
use it as your primary reference.
Even if you upgrade AVIC-N1 with these discs,
the following AV functions do not become the
same as AVIC-N3.

! The functions on the hardware buttons
! The functions for iPod
! The functions for SIRIUS Satellite Radio
! The functions for XM Satellite Radio

p If you have already upgraded your AVIC-N1

by using CNDV-50MT (CNDV-50MTP), you

do not need to obtain the Operation Man-

ual for AVIC-N2. Use the Operation Manual

supplied with CNDV-50MT (CNDV-50MTP)

as your primary reference.

Precaution

Obtain the manual by
downloading it via Web

1 Visit us at the following site:

http://www.pioneerelectronics.com.

2 Search for “CNDV-50MTP”.

3 Click “DOCUMENTS” on the screen,
and then click “Owner’s Manual”.

4 Please check whether the manual has
the following description on its front cover.

“This operation manual can be used with the follow­ing models:
AVIC-N1, AVIC-N2”

5 Download the manual if desired.

Obtain the manual by ordering
it by phone

To obtain the manual, please contact the com­panies listed at “After-sales service for Pioneer
products”.

Be sure to read the
following descriptions

License agreement

This provides a license agreement of this soft­ware. Be sure to read this before using the
software.

About the database

This provides some notes for the map data­base and the date when it was recorded.

Other precautions

This provides the important precautions for
using this software.

PIONEER CNDV-100MT- for
U.S.A.

THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
ELECTRONICS (USA) INC. (“PIONEER”).
PLEASE READ THE TERMS AND CONDI­TIONS OF THIS AGREEMENT CAREFULLY BE­FORE USING THE SOFTWARE INSTALLED ON
THE PIONEER PRODUCTS. BY USING THE
SOFTWARE INSTALLED ON THE PIONEER
PRODUCTS, YOU AGREE TO BE BOUND BY
THE TERMS OF THIS AGREEMENT. THE SOF T­WARE INCLUDES A DATABASE LICENSED BY
THIRD PARTY SUPPLIER( S) (“SUPPLIERS”),
AND YOUR USE OF THE DATABASE IS COV­ERED BY THE SUPPLIERS’ SEPARATE
TERMS, WHICH ARE ATTACHED TO THIS
AGREEMENT (Refer to TERMS AND CONDI-
TIONS FOR THE TELE ATLAS DATA). IF YOU DO
NOT AGREE WITH ALL OF THESE TERMS,
PLEASE RETURN THE PIONEER PRODUCTS
(INCLUDING THE SOFTWARE, AND ANY
WRITTEN MATERIALS) WITHIN FIVE (5) DAYS
OF RECEIPT OF THE PRODUCTS, TO THE
AUTHORIZED PIONEER DEALER FROM
WHICH YOU PURCHASED THEM. USE OF
THE SOFTWARE SHALL BE DEEMED TO BE
YOUR CONSENT TO THE LICENSE AGREE­MENT.

1 GRANT OF LICENSE

Pioneer grants to you a non-transferable, non
exclusive license to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi­ness, only on such Pioneer products.

License agreement

You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicense, market
or otherwise transfer the Software or use it in
any manner not expressly authorized by this
agreement. You shall not derive or attempt to
derive the source code or structure of all or
any portion of the Software by reverse engi­neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use
involving the processing of data for other per­sons or entities.
Pioneer and its licensor(s) shall retain all copy­right, trade secret, patent and other proprie­tary ownership rights in the Software. The
Software is copyrighted and may not be cop­ied, even if modified or merged with other pro­ducts. You shall not alter or remove any
copyright notice or proprietary legend con­tained in or on the Software.
You may transfer all of your license rights in
the Software, the related documentation and a
copy of this License Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li­cense Agreement.

2 DISCLAIMER OF WARRANTY

The Software and related documentation are
provided to you “AS IS”. PIONEER AND ITS LI­CENSOR(S) (for the purpose of provisions 2
and 3, Pioneer and its licensor(s) shall be col­lectively referred to as “Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY FOR THE SOFT­WARE, WHETHER EXPRESS OR IMPLIED,
AND ALL WARRANTIES OF MERCHANTABIL­ITY AND FITNESS FOR ANY PARTICULAR
PURPOSE FOR THE SOFTWARE ARE EX­PRESSLY EXCLUDED. SOME STATES DO NOT
ALLOW EXCLUSION OF IMPLIED WARRAN­TIES, SO THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU. The Software is complex and
may contain some nonconformities, defects or

errors. Pioneer does not warrant that the Soft­ware will meet your needs or expectations,
that operation of the Software will be error free
or uninterrupted, or that all non-conformities
can or will be corrected. Furthermore, Pioneer
does not make any representations or warran­ties regarding the use or results of the use of
the Software in terms of its accuracy, reliability
or otherwise.

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN­CURRED BY YOU (INCLUDING, WITHOUT LIM­ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
INCOME, LOST SALES OR BUSINESS, EXPEN­DITURES, INVESTMENTS, OR COMMITMENTS
IN CONNECTION WITH ANY BUSINESS, LOSS
OF ANY GOODWILL, OR DAMAGES) RESULT­ING FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ANY AND ALL CAUSES OF ACTION INDIVI­DUALLY OR IN THE AGGREGATE, INCLUDING
WITHOUT LIMITATION BREACH OF CON­TRACT, BREACH OF WARRANTY, NEGLI­GENCE, STRICT LIABILITY,
MISREPRESENTATION, AND OTHER TORTS.
IF PIONEER’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50%) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO­DUCT.

License agreement

Some states do not allow the exclusion or lim­itation of incidental or consequential da­mages, so the above limitation or exclusion
may not apply to you. This warranty disclaimer
and limitation of liability shall not be applic­able to the extent that they are prohibited by
any applicable federal, state or local law which
provides that such a disclaimer or limitation
cannot be waived or preempted.

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software
nor any other technical data received from
Pioneer, nor the direct product thereof, will be
exported outside the United States except as
authorized and as permitted by the laws and
regulations of the United States. If the Soft­ware has been rightfully obtained by you out­side of the United States, you agree that you
will not re-export the Software nor any other
technical data received from Pioneer, nor the
direct product thereof, except as permitted by
the laws and regulations of the United States
and the laws and regulations of the jurisdic­tion in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated.
You may terminate it at any time by destroying
the Software. The Agreement also will termi­nate if you do not comply with any terms or
conditions of this Agreement. Upon such ter­mination, you agree to destroy the Software.

6 U.S. GOVERNMENT END USERS

If the Software is being acquired by or on be­half of the United States government or any
other entity seeking or applying rights similar
to those customarily claimed by the United
States government, the Data is licensed with
“Limited Rights”. Utilization of the Software is
subject to the restrictions specified in the
“Rights in Technical Data” clause at DFARS

252.227-7013, or the equivalent clause for non­defense agencies. Pioneer Electronics (USA)

Inc., 2265 East 220th Street, Long Beach, CA

90810.

7 MISCELLANEOUS

This is the entire Agreement between Pioneer
and you regarding its subject matter. No
change in this Agreement shall be effective
unless agreed to in writing by Pioneer. Pioneer
retailers do not have the authority to change
this Agreement. This Agreement shall be gov­erned by and construed in accordance with
the internal laws of the State of California. If
any provision of this Agreement is declared in­valid or unenforceable, the remaining provi­sions of this Agreement shall remain in full
force and effect.

PIONEER CNDV-100MT- for
Canada

THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
ELECTRONICS OF CANADA, INC.
(“PIONEER”). PLEASE READ THE TERMS AND
CONDITIONS OF THIS AGREEMENT CARE­FULLY BEFORE USING THE SOFTWARE IN­STALLED ON THE PIONEER PRODUCTS. BY
USING THE SOFTWARE INSTALLED ON THE
PIONEER PRODUCTS, YOU AGREE TO BE
BOUND BY THE TERMS OF THIS AGREE­MENT. THE SOFTWARE INCLUDES A DATA­BASE LICENSED BY THIRD PARTY SUPPLIER
(S) (“SUPPLIERS”), AND YOUR USE OF THE
DATABASE IS COVERED BY THE SUPPLIERS’
SEPARATE TERMS, WHICH ARE ATTACHED
TO THIS AGREEMENT (Refer to TERMS AND
CONDITIONS FOR THE TELE ATLAS DATA). IF
YOU DO NOT AGREE WITH ALL OF THESE
TERMS, PLEASE RETURN THE PIONEER PRO­DUCTS (INCLUDING THE SOFTWARE, AND
ANY WRITTEN MATERIALS) WITHIN FIVE (5)
DAYS OF RECEIPT OF THE PRODUCTS, TO
THE AUTHORIZED PIONEER DEALER FROM
WHICH YOU PURCHASED THEM. USE OF
THE SOFTWARE SHALL BE DEEMED TO BE
YOUR CONSENT TO THE LICENSE AGREE­MENT.

1 GRANT OF LICENSE

Pioneer grants to you a non-transferable, non
exclusive license to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi­ness, only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicense, market
or otherwise transfer the Software or use it in
any manner not expressly authorized by this
agreement. You shall not derive, or attempt to

derive, the source code or structure of all or
any portion of the Software by reverse engi­neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use
involving the processing of data for other per­sons or entities.
Pioneer and its licensor(s) shall retain all copy­right, trade secret, patent and other proprie­tary ownership rights in the Software. The
Software is copyrighted and may not be cop­ied, even if modified or merged with other pro­ducts. You shall not alter or remove any
copyright notice or proprietary legend con­tained in or on the Software.
You may transfer all of your license rights in
the Software, the related documentation and a
copy of this License Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li­cense Agreement.

2 DISCLAIMER OF WARRANTY

The Software and related documentation are
provided to you “AS IS”. PIONEER AND ITS LI­CENSOR(S) (for the purpose of provisions 2
and 3, Pioneer and its licensor(s) shall be col­lectively referred to as “Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY FOR THE SOFT­WARE, WHETHER EXPRESS OR IMPLIED,
AND ALL WARRANTIES OF MERCHANTABIL­ITY AND FITNESS FOR ANY PARTICULAR
PURPOSE FOR THE SOFTWARE ARE EX­PRESSLY EXCLUDED. SOME STATES DO NOT
ALLOW EXCLUSION OF IMPLIED WARRAN­TIES, SO THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU. The Software is complex and
may contain some nonconformities, defects or
errors. Pioneer does not warrant that the Soft­ware will meet your needs or expectations,
that operation of the Software will be error free
or uninterrupted, or that all non-conformities
can or will be corrected. Furthermore, Pioneer
does not make any representations or warran­ties regarding the use or results of the use of
the Software in terms of its accuracy, reliability
or otherwise.

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN­CURRED BY YOU (INCLUDING, WITHOUT LIM­ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
SALES OR BUSINESS, EXPENDITURES, IN­VESTMENTS, OR COMMITMENTS IN CON­NECTION WITH ANY BUSINESS, LOSS OF
ANY GOODWILL, OR DAMAGES) RESULTING
FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ALL CAUSES OF ACTION IN THE AGGRE­GATE, INCLUDING WITHOUT LIMITATION
BREACH OF CONTRACT, BREACH OF WAR-

RANTY, NEGLIGENCE, STRICT LIABILITY, MIS­REPRESENTATION, AND OTHER TORTS. IF
PIONEER’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50%) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO­DUCT.
Some states do not allow the exclusion or lim­itation of incidental or consequential da­mages, so the above limitation or exclusion
may not apply to you. This warranty disclaimer
and limitation of liability shall not be applic­able to the extent that they are prohibited by
any applicable federal, state or local law which
provides that such a disclaimer or limitation
cannot be waived or preempted.

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software
nor any other technical data received from
Pioneer, nor the direct product thereof, will be
exported outside Canada except as authorized
and as permitted by the laws and regulations
of Canada. If the Software has been rightfully
obtained by you outside of Canada, you agree
that you will not re-export the Software nor any
other technical data received from Pioneer,
nor the direct product thereof, except as per­mitted by the laws and regulations of Canada
and the laws and regulations of the jurisdic­tion in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated.
You may terminate it at any time by destroying
the Software. The Agreement also will termi­nate if you do not comply with any terms or
conditions of this Agreement. Upon such ter­mination, you agree to destroy the Software.

6 MISCELLANEOUS

This is the entire Agreement between Pioneer
and you regarding its subject matter. No
change in this Agreement shall be effective
unless agreed to in writing by Pioneer. Pioneer
retailers do not have the authority to change
this Agreement. This Agreement shall be gov­erned by and construed in accordance with
the internal laws of the Province of Ontario
and the federal laws of Canada applicable
therein. If any provision of this Agreement is
declared invalid or unenforceable, the remain­ing provisions of this Agreement shall remain
in full force and effect.

TERMS AND CONDITIONS
FOR THE TELE ATLAS DATA

End User Licensing Terms

THIS IS A LEGAL AGREEMENT (THE “AGREE­MENT”) BETWEEN YOU, THE END USER, AND
PIONEER and its licensors of Data product
(sometimes collectively “ Licensors”). BY
USING YOUR COPY OF THE LICENSED DATA,
YOU AGREE TO THE TERMS AND CONDI­TIONS OF THIS AGREEMENT.

1 Grant of License.

Licensors grant you a non-transferable, nonex­clusive license to use the map data and busi­ness points of interest information (the

“POIs”), owned by Tele Atlas, (together, the
“Data”) contained on these discs, solely for

personal, non-commercial use and not to op­erate a service bureau or for any other use in­volving the processing of data of other
persons or entities. You may make one (1)
copy of the Data for archival or backup pur­poses only but you may not otherwise copy, re­produce, modify, make derivative works, derive
the structure of or reverse engineer the Data.
The Data is restricted for use with the
PIONEER Product(s). The Data contains confi­dential and proprietary information and mate­rials, and may contain trade secrets, so you
agree to hold the Data in confidence and in
trust and not to disclose the Data or any por­tions in any form, including by renting, leas­ing, publishing, leasing, sublicensing or
transferring the Data to any third party. You
are explicitly prohibited from downloading the
digital maps and programmes contained in
the Data or from transferring these to another
data carrier or computer. You are prohibited
from removing or obscuring any copy right,
trademark notice or restricted legend.

License agreement

2 Ownership.

The Data is copyrighted by Tele Atlas and its Li­censors and they retain all ownership rights in
the Data. You agree not to alter, remove, oblit­erate, or obscure any copyright notice or pro­prietary legend contained in or on the Data.

3 Limitation of Liability.

NEITHER TELE ATLAS NOR ITS SUPPLIERS
SHALL BE LIABLE TO THE UNDERSIGNED
FOR ANY INCIDENTAL, CONSEQUENTIAL,
SPECIAL, INDIRECT OR EXEMPLARY DA­MAGES ARISING OUT OF THIS AGREEMENT,
INCLUDING LOST PROFITS OR COSTS OF
COVER, LOSS OF USE OR BUSINESS INTER­RUPTION OR THE LIKE, REGARDLESS OF
WHETHER THE PARTY WAS ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
NOTWITHSTANDING ANYTHING TO THE CON­TRARY CONTAINED HEREIN, TELE ATLAS
SHALL HAVE NO MONETARY LIABILITY TO
THE UNDERSIGNED FOR ANY CAUSE (RE­GARDLESS OF THE FORM OF ACTION)
UNDER OR RELATING TO THIS AGREEMENT.

4 Warranty Disclaimer.

THE DATA IS PROVIDED ON AN “AS IS” AND
“WITH ALL FAULTS BASIS” AND PIONEER,

ITS LICENSORS, AND ITS LICENSED DISTRI­BUTORS AND SUPPLIERS (COLLECTIVELY,
“SUPPLIERS”) EXPRESSLY DISCLAIM ALL
OTHER WARRANTIES, EXPRESS OR IM­PLIED, INCLUDING BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF NON-INFRIN­GEMENT, MERCHANTABILITY, EFFECTIVE­NESS, COMPLETENESS, ACCURACY, TITLE
AND FITNESS FOR A PARTICULAR PURPOSE.
PIONEER, ITS LICENSORS AND SUPPLIERS
DO NOT WARRANT THAT THE DATA WILL
MEET YOUR REQUIREMENTS OR THAT THE
OPERATION OF THE DATA WILL BE UNINTER­RUPTED OR ERROR FREE. NO ORAL OR
WRITTEN ADVICE GIVEN BY PIONEER, ITS LI­CENSORS, SUPPLIERS OR ANY OF THEIR RE­SPECTIVE EMPLOYEES CREATES A

WARRANTY OR IN ANY WAY INCREASES
PIONEER’, ITS LICENSORS OR SUPPLIERS
LIABILITY AND YOU MAY NOT RELY ON ANY
SUCH INFORMATION OR ADVICE. THIS DIS­CLAIMER IS AN ESSENTIAL CONDITION OF
THIS AGREEMENT AND YOU ACCEPT THE
DATA ON THIS BASIS.

5 Termination.

This Agreement will terminate immediately
and automatically, without notice, if you
breach any term of this Agreement. You agree
that in the event of termination of the Agree­ment, you shall return the Data (including all
documentation and all copies) to PIONEER
and its suppliers.

6 Indemnity.

You agree to indemnify, defend and hold
PIONEER, its Licensors, and its suppliers (in­cluding their respective licensors, suppliers,
assignees, subsidiaries, affiliated companies,
and the respective officers, directors, employ­ees, shareholders, agents and representatives)
free and harmless from and against any liabili­ty, loss, injury (including injuries resulting in
death), demand, action, cost, expense, or
claim of any kind or character, including but
not limited to attorney’s fees, arising out of or
in connection with any use or possession by
you of the Data.

7 US. GOVERNMENT RIGHTS.

If End User is an agency, department, or other
entity of the United States Government, or
funded in whole or in part by the United States
Government, then use, duplication, reproduc­tion, release, modification, disclosure or trans­fer of this commercial product and
accompanying documentation, is restricted in
accordance with the LIMITED or RESTRICTED
rights as described in any applicable DFARS
or FAR. In case of conflict between any of the
FAR and/or DFARS that may apply to the Li­censed Tele Atlas Product, the construction
that provides greater limitations on the Gov­ernment’s rights shall control. Contractor/
manufacturer is Tele Atlas North America,
Inc., 11 Lafayette Street, Lebanon, NH 03766-

1445. Phone: [phone]. The Licensed Tele
Atlas Products are © 2006-2009 by Tele Atlas.
ALL RIGHTS RESERVED. For purpose of any
public disclosure provision under any federal,
state or local law, it is agreed that the Licensed
Tele Atlas Products are a trade secret and a
proprietary commercial product and not sub­ject to disclosure.

8 Additional provisions for Tele Atlas

®

Premium Points of Interest (the “POIs”).
With respect to the POI Licensed Tele Atlas
Products:

(The following provisions only refer to the pro­ducts which contain Tele Atlas

®

Premium
Points of Interest.)
End User specifically agrees that it shall not:
(a) except as otherwise specifically set forth
herein, license or otherwise provide the POI Li­censed Tele Atlas Products to any third party
for the purposes of resale, sublicensing, redis­tribution or for the purpose of compiling, en­hancing, verifying, supplementing, adding to
or deleting from any mailing list, geographic
or trade directories, business directories, clas­sified directories, classified advertising which
is sold, rented, published, furnished or in any
manner provided to a third party;

(b) make the POI Licensed Tele Atlas Products
available in an on-line environment unless
properly secured and/or encrypted to prevent
unauthorized access to the POI Licensed Tele
Atlas Products; and
(c) use the POI Licensed Tele Atlas Products,
either in whole or in part, as a factor in (i) es­tablishing an individual’s eligibility for credit
or insurance; (ii) connection with underwriting
individual insurance; (iii) evaluating an indivi­dual for employment or promotions, reassign­ment or retention as an employee; (iv) in
connection with a determination of an indivi­dual’s eligibility for a license or other benefit
granted by a governmental authority; or (v) for
soliciting survivors of deceased persons.
(d) create mailing or telemarketing lists unless
authorized in this Agreement.
(e) End User will house the POI Licensed Tele
Atlas Products on the Internet behind firewalls
and will implement a system of controls that
will (i) protect the integrity of the POI Licensed
Tele Atlas Products; (ii) control access to the
POI Licensed Tele Atlas Products and (iii) pre­vent unauthorized usage or copying of the POI
Licensed Tele Atlas Products.
(f) End User shall display the POI Licensed
Tele Atlas Product copyright notice at all times
in conjunction with the Tele Atlas copyright
notice. As of the Effective Date of this Agree­ment, the copyright notice for the POI Li­censed Tele Atlas Product is:

Data by

Copyright 2009

All Rights Reserved

C

9 Additional provisions for Tele Atlas

®

Brand Icon Licensed Tele Atlas Product (the
“Brand Icon Licensed Tele Atlas Product”):

(The following provisions only refer to the pro­ducts which contain Tele Atlas

®

Brand Icon Li-

censed Tele Atlas Product.)

a End User's use of the Brand Icon Licensed

Tele Atlas Product and any portion thereof,
is limited to use solely for the purpose of en­hancing the value and/or use of the spatial
vector data furnished or made by Tele Atlas.
Notwithstanding anything to the contrary
herein, or in any attachment or exhibit here­to, in no event shall End User use the
Brand Icon Licensed Tele Atlas Product or
any portion thereof in connection with or in
conjunction with spatial street vector data
furnished or made by a party other than
Tele Atlas. End User may only use the
icons, brand names, logos, trademarks or
other features within (and not separate
from) the map data. In addition, End User
shall not modify or alter the color, shape,
size, and orientation of the Brand Icon Li­censed Tele Atlas Product as provided to
End User without Tele Atlas’s prior written
approval.

b Licensee agrees that the use of Brand Icon

Licensed Tele Atlas Product subject to the
terms and conditions set forth in this Agree­ment and that there may be additional third
party terms, conditions and restrictions to
which the use of the Brand Icon Licensed
Tele Atlas Product will be subject provided
to the End User from time to time by Licen­see in the release notes applicable to the
Value Added Product.

c Should End User enter into any commercial

arrangement for advertising, pay-for-place­ment, promotion or any similar paid brand
marketing exposure with any owners (or
their representatives) of any of the brand
icons supplied with the Brand Icon Li­censed Tele Atlas Product, Tele Atlas shall
receive no less than twenty five percent
(25%) of any revenues collected in the con­text of any such commercial arrangement,
unless otherwise agreed-to in advance and
in writing by both parties.

10 Additional Provisions with respect to
Tele Atlas

®

3D Landmarks Licensed Tele

Atlas Product (the “3D Landmarks”):

(The following provisions only refer to the pro­ducts which contain Tele Atlas

®

3D Landmarks
Licensed Tele Atlas Product.)
Licensee agrees to include as soon as practi­cally possible, but no later than the first new
release of the Value Added Product following
Licensee’s receipt of any 3D Landmarks, any
copyright notices related to the display of such
landmarks on every Value Added Product and
in the “about box” of the Value Added Product.
Notwithstanding the aforementioned, Tele
Atlas has the right to decide, at its sole discre­tion, to remove specific 3D Landmarks in sub­sequent releases of the Licensed Tele Atlas
Products. In such case, Licensee will remove
those 3D Landmarks from the Value Added
Product as soon as practically possible, but
not later than the first new release of the Value
Added Product following Licensee’s receipt of
the Update to the Licensed Tele Atlas Product.
Tele Atlas shall not be held responsible for any
possible damages, costs or expenses incurred
by Licensee related to such removal of a 3D
Landmark by Tele Atlas from the Licensed Tele
Atlas Product or failure to remove a 3D Land­mark by Licensee from the Value Added Pro­duct.

11 Copyright Notices.

Licensee shall conspicuously display each ap­plicable then current copyright notice for the
Licensed Tele Atlas Products on the initial
splash screen, in the code, on the storage
medium, on the packaging, in the “Help/
About” section, in the operator’s manual, and
in any displayed or printed map image, for
each Value Added Product that is based upon:

1 Tele Atlas®MultiNet®North America: As of

the Effective Date, the copyright notice is:
“© 2006 – 2009 Tele Atlas. All rights re­served. This material is proprietary and the
subject of copyright protection and other in­tellectual property rights owned or licensed
to Tele Atlas. Tele Atlas is an authorized dis­tributor of selected Statistics Canada com­puter files under Agreement number 6776.
The product includes information copied
with permission from Canadian authorities,
including © Canada Post Corporation, Geo­Base

®

, and Department of Natural Re­sources Canada, All rights reserved. The
product is sourced in part from Geography
Division, Statistics Canada, 2008 Road Net­work File (RNF), 92-500-XWE/XWF. The in­corporation of data sources from Statistics
Canada within this product shall not be
construed as constituting an endorsement
by Statistics Canada of such product. The
use of this material is subject to the terms
of a License Agreement. You will be held li­able for any unauthorized copying or disclo­sure of this material.”

2 Tele Atlas

®

MultiNet®Mexico: As of the Ef-

fective Date, the copyright notice is: “©
2006 – 2009 Tele Atlas. All rights reserved.
This material is proprietary and the subject
of copyright protection and other intellec­tual property rights owned or licensed to
Tele Atlas. The use of this material is sub­ject to the terms of a license agreement.
You will be held liable for any unauthorized
copying of disclosure of this material.”

12 Miscellaneous.

This is the exclusive and complete Agreement
between the Licensors and you regarding its
subject matter. Nothing in this Agreement
shall create a joint venture, partnership or
principal-agent relationship between the Li­censors and you. Sections 2, 5 and 7 - 11 shall
survive the expiration or termination of this
Agreement. This Agreement may be amended,

altered, or modified only by PIONEER. You
may not assign any part of this Agreement
without PIONEER’ prior written consent. You
acknowledge and understand that the Data
may be subject to restrictions on exportation
and agree to comply with any applicable ex­port laws. In the event that any provision or
part of a provision of this Agreement is deter­mined to be invalid, illegal, or unenforceable,
such provision or part thereof shall be stricken
from this Agreement and the remainder of this
Agreement shall be valid, legal, and enforce­able to the maximum extent possible. Any no ­tice under this Agreement shall be delivered
by courier to PIONEER, Attention Legal
Department.

License agreement

About the database

About the data for the map
database

! Modifications related to roads, streets/high-

ways, terrain, construction and other things
before/during the development period may
not be reflected in this database. Inevitably,
those modifications after that period are
not reflected in this database.

! Regardless of existing and newly-built

things, the data may be different from the
actual condition.

! For details about the map coverage of this

navigation system, refer to the information
on our website.

! It is strictly prohibited to reproduce and use

any part or the whole of this map in any
form without permission from the copyright
owner.

! If the local traffic regulations or conditions

deviate from this data, follow the local traf­fic regulations (such as signs, indications,
etc.) and conditions (such as construction,
weather, etc.).

! The traffic regulation data used in the map

database applies only to standard sized
passenger vehicles. Note that regulations
for larger vehicles, motorbikes, and other
non-standard vehicles are not included in
the database.

! As for Map Version, Tele Atlas. Rel. 09/2009.

Icons for XM Satellite Radio

The icon of each broadcast station is con­tained in the hard disk drive based on the data
provided by XM Satellite Radio as of Septem­ber 2009.
Any changes made by XM Satellite Radio in
the lineup or icon of the broadcast station in
the future may not be supported by the naviga­tion system, and may cause the unit to display
incorrect icons.

Failure to operate

! Should the navigation system fail to oper-

ate properly, contact your dealer or nearest
authorized Pioneer Service Station.

After-sales service for Pioneer products

Please contact the dealer or distributor from
which you purchased the product for after­sales service (including warranty conditions)
or any other information. In case the necessary
information is not available, please contact the
companies listed below.
Please do not ship your product to the compa­nies at the addresses listed below for repair
without making advance contact.

! U.S.A

Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760 Long Beach, CA 90801-1760
800-421-1404

! CANADA

Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway Markham, Ontario
L3R 0P2
1-877-283-5901
905-479-4411

Visit our website

Visit us at the following site:

http://www.pioneerelectronics.com

In Canada

http://www.pioneerelectronics.ca

1 Register your product. We will keep the details

of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.

2 Receive updates on the latest products and

technologies.

Other precautions

3 Download owner’s manuals, order product

catalogs, research new products, and much
more.

4 Receive notices of software upgrades and

software updates.

If you upgrade your navigation system by
these discs, the system will have the following
changes.

Renewed points for all models

Renewal Map database

The Map database will be changed.

Wide variety of facility
information for Points of
Interest (POI) search

Approximately 10.8 million POIs are included
in the database.

p Some facilities and categories used in POI

Search, Vicinity Search, and Overlay POI

will be modified.

p Some POI information may not be accurate

or may become inaccurate through the
passage of time. Please directly contact the
POI to verify the accuracy of the informa­tion about the POI which appears in this
database. POI information is subject to
change without notice.

Renewal XM Satellite Radio in
the lineup and icon of the
broadcast station

The XM Satellite Radio in the lineup and icon
of the broadcast station will be changed.

Renewed points through
this upgrade

Renewed points for AVIC­N1, AVIC-N2, AVIC-N3, AVIC­D1 or AVIC-D2

Renewed POI icon

Some facilities icons used in POI Search, Vici­nity Search, and Overlay POI will be chan-

ged.

New operations for “Browsing
the XM special contents”

The following features have been modified to
enhance ease of operation.

Storing browsable information

XM special contents can be stored as “My Fa-
vorites” so that it can be accessed without

searching every time an update is needed.
p The displayed items depend on the infor-

mation that is sent from each station.

p “My Favorites” can store up to 50 items.

1 Touch [Info/Traffic] in the navigation
menu, then touch [Set My Favorites].

The screen will display a list of categories. The
information appearing on screen is automati­cally updated at regular intervals.

2 Touch a category you want to browse
from the list.

3 Touch an item you wish to store.

If an item is divided into more detail cate­gories, select the one from the list to narrow
down the category. After narrowing down, the
message confirming whether or not to register
the item will appear.

4 Touch [OK].

If the storing step is successful, the confirma­tion screen will appear.
Touch [OK] to complete the storing and return
to the previous screen.

Displaying favorite browsable
Information

You can check and delete the browsable infor­mation you registered.

1 Store the desired item (topic).

= For details, refer to Storing browsable infor-
mation

2 Touch [Info/Traffic] in the navigation
menu, and then touch [My Favorites].

A list of registered items (topics) appears on
the screen.

3 Touch an item to display the contents.

The texts appear on each items show the pro­cess of storing in a hierarchical way.

Renewed points for AV Source

Source icon

The icon design for each source will be
changed.

Renewed points only for
AVIC-N1

Changes to appearance

The appearance of the navigation menu and
AV menu will change as follows:

Navigation menu

AV menu

Renewed points for AV Source

[ESC] touch key

The name of some of the touch keys will be
changed from [ESC]to[HIDE].

Renewed point in the MP3
operation screen

The folder icon will be added to the [UP] touch
key.
The file extension (.mp3) will be displayed after
a track in the track list display and detail Infor­mation display. (The extension may not be dis­played if the file name is long.)

Renewed points through
this upgrade

The program is installed to the navigation sys­tem using the application discs.
When installing the program, you carry out
the following operations. When all the setup
procedures are completed, you can use the
navigation system.
The screen images used in this section are
AVIC-N2 as an example.

CAUTION
You cannot go back to the previous (pre­upgrade) version of the application after
the software upgrade is completed. Also,
the map discs that were previously used
cannot be used. Instead, use the CNDV­100MT DVDs as your new map discs.

1 Park your vehicle in a safe place.

Leave the engine on, and make sure that the
parking brake is applied.

2 Remove the current disc.

3 Insert the new Pioneer DVD Map Disc
into the appropriate slot.

When the upgraded program has been found,
installation of the program starts immediately.

p If you cannot insert a disc completely or if

an inserted disc is not recognized, check
that the label side of the disc is up. Press
the EJECT (or DVD-ROM EJECT) button to
eject the disc, and check the disc for da­mage before inserting the disc again.

CAUTION
While this screen is visible, NEVER switch the
ignition key position or turn off the power of na­vigation system.

When the installation is complete, the opening
display appears.

p By upgrading AVIC-N1 or AVIC-N3 with

these discs, the same screen appears.

p By upgrading other models with these

discs, the following opening display ap­pears.

AVIC-D1 or AVIC-D2

AVIC-D3, AVIC-N4 or AVIC-N5

Instructions for
upgrading

4 Press the NAVI/AV button to change
the navigation screen. (If you use AVIC-D1
or AVIC-D2, press the MAP button.)

Some time is needed until navigation is ready.

5 Check the details of the caution mes­sage and touch [OK].

The map of your surroundings is displayed.
You can operate the navigation system by
touching keys displayed on the screen as
usual.

When upgrading AVIC-N1, perform the following pro­cedure.

6 To set the time difference, touch [+] or
[–].

Time difference

The time difference between the time origin­ally set in the navigation system (Pacific Stan­dard Time) and the current location of your
vehicle is shown. If necessary, adjust the time
difference. Touching [+]or[–] changes the
time difference display in one-hour incre­ments. The time difference can be set from +3
to –3 hours.

7 If necessary, set to summer time.

Daylight Saving Time (DST) is off by default.
Touch [Summer Time] to change the time if
you are in the daylight saving period. This
turns the display below summer time [On].

8 To complete the setting, touch [Back].

The map of your surroundings appears.