LLPP11 LLAABBEELLPPRRIINNTTEERR UUSSEERR M
MAANNUUAALL
PPiinnnnaaccllee TTeecchhnnoollooggyy CCoorrpp..
CONTENTS
1 UNPACKING THE LP LABEL PRINTER ....................................................................................................... 1
2 SUMMARIZATION .......................................................................................................................................... 2
2.1 Technical Specification .............................................................................................................................. 2
2.2 Advanced Features ..................................................................................................................................... 2
2.3 Dimension .................................................................................................................................................. 3
2.4 Appearance ................................................................................................................................................ 3
2.5 Power Switch and Communication Interface ............................................................................................ 4
3 KEYBOARD LAYOUT .................................................................................................................................... 5
4 HOW TO INSTALL PAPER ............................................................................................................................. 7
5 PC SOFTWARE INSTALLATION ................................................................................................................. 12
6 COMMUNICATION ....................................................................................................................................... 15
6.1 Connect LP to PC .................................................................................................................................... 15
6.2 Communication Test ................................................................................................................................ 15
6.3 Re-set label printer IP address ................................................................................................................. 16
7 HOW TO UPDATE PROGRAM ..................................................................................................................... 16
8 HOW TO DOWNLOAD FONT ...................................................................................................................... 19
9 HOW TO CREATE PLU DATA ...................................................................................................................... 20
10 HOW TO DOWNLOAD PLU TO LP1 PRINTER ......................................................................................... 22
11 HOW TO CREATE AND PRINT HOTKEY .................................................................................................. 23
12 LABEL DESIGN ............................................................................................................................................. 29
13 SYSTEM SET MODE ..................................................................................................................................... 35
13.1 Set parameters in PC software ................................................................................................................. 36
13.2 Set barcode .............................................................................................................................................. 38
14 PRINT LABEL ................................................................................................................................................ 40
1
1 UNPACKING THE LP LABEL PRINTER
User manual
4P9D Cable
LP1 Printer
PC Disk
2
2 SUMMARIZATION
Optional type
LP12BX
LP12CX
Memory capacity
Standard 4Mbit(extendable)
Thermal printer head
56mm width, 203 Dot/in
72mm width, 203 Dot/in
Printing speed
70 mm/s (25℃)
70 mm/s (25℃)
Paper Specification
Type
Thermal label paper
Paper width
61.5±0.5mm
79.5±0.5mm
Printing contents
EAN 18/EAN 13 barcode, PLU name, unit price, total price, weight, graphic, discount mark,
packing date, expiration date, trade mark, head message, bottom message, etc.
Storing data
10000 PLU information, 12000 sets information, 42 sets of barcode label file
(120(length)*50(width))
Interface
PS2*1、RS232*1、Ethernet *1 、Wireless 2.4G Wireless 433M、 Bluetooth
Keystroke
36*2 hotkeys、 4 function keys
Display
65*132
Optional function
Linerless label printing module、partition machine
Power supply
AC 18V 1.5A(AC 115V/220/240 50/60Hz Adaptor)
Operating temperature
0℃~40℃,5%~85%R.H
Stock environment
0℃~40℃,5%~90%R.H
Dimensions
145*286*179(mm)
Weight
3KG
2.1 Technical Specification
2.2 Advanced Features
Provide the label graph edition software for any label design with the scope of 30*30mm～55*60 size.
With auto label backing re-winder, can continuously printing labels and spit out the next label
automatically.
Integrate an auto-packing system with platform scale (with communication function).
Support UNICODE and can work with back office s/w based on NT, UNIX, INTERNET.
Can select any kinds of font and language in PC editor application, and download for printing.
Printing darkness can be adjusted according to label sensitivity, and with auto compensation of voltage and
temperature changes, makes the lifetime of thermal head 2-3 times longer than normal machine's.
Support 60*40mm paper roll with 1000pcs labels while other competitive printer in the market only can
load paper roll with max.
3
Capable of printing label, background and PLU name in different language for different countries.
3 inch
2 inch
With 65*132 graphic LCD to display commodity name, price, weight, amount and other details
information.
2.3 Dimension
Unit: mm
2.4 Appearance
4
ON
OFF
Use to connect to peripheral
equipment, such as scale
Use to download data from PC
or connect to scale
2.5 Power Switch and Communication Interface
5
3 KEYBOARD LAYOUT
Shift the key function.
Press the key and hold it for 2
seconds to enter system set mode.
Confirm key.
Press key [SHIFT][COPY] to copy
the last label, and stops until you
press key [C].
Decimal point.
Combine with numerical key shift
digits to bar code number.
Clear data.
Paper feeding.
ENGLISH VERSION
6
For Azerbaijan only
Shift the key function.
Press the key and hold it for 2
seconds to enter system set mode.
Confirm key.
Press key [SHIFT][COPY] to copy
the last label, and stops until you
press key [C].
Decimal point.
Combine with numerical key shift
digits to bar code number.
Clear data.
Paper feeding.
7
4 HOW TO INSTALL PAPER
1. Follow the arrowhead
direction and push the two side
buttons.
2. Open the upper cover and
open the printer head
8
Label paper installation
3. Roll paper like the picture shows , lock the paper
edge on the winder and shut up the flake
4. Close the printer head
5. Close the cover
9
Receipt paper installation
Load the receipt paper like the picture shows and
then shut up the flake
Close the printer head
Close the cover
10
Lineless paper installation
Load the receipt paper like the picture shows and then shut up the flake
Close the printer head
Close the cover
11
Label paper installation（Mechanism picture ）
Paper-block installation（Mechanism picture ）
If the paper-blocker drops out, please install it to the axis in time to avoid loss. Clip it to the axis
and pull it parallel to the end of the axis as the below pictures show.
12
Click it.
Click it.
5 PC SOFTWARE INSTALLATION
Double click LP-MNE.exe:
13
Click it.
Click it to finish
installation.
Here shows the
destination location.
14
15
6 COMMUNICATION
2. Input the LP’s
IP address here.
1. Input printer
name
3. Double click to
choose the printer
Before you download data or driver, you need to test the communication.
6.1 Connect LP to PC
LP Ethernet cable PC
6.2 Communication Test
Before you use link 32, you need to test the communication:
1. Connect LP1 to PC: Via Ethernet port
2. Communication Test
a) Open attached PC software LP-MNE, and choose ‘Link32’.
b) Input scale information, we suggest you connect LP to PC via Ethernet port.
c) Make your computer IP address is in the same segment of the LP printer, such as if the LP printer IP address is
192.168.1.87 (the default IP of this printer), then your computer’s IP address should be 192.168.1.xxx. You
also can re-set the label printer’s IP address to make the connection with your PC.
3. Choose the button and click it, then, start to test communication.
16
Communication is OK
Double click
this column to
input the name.
Double click
this column to
input IP address.
Double click
this column to
select it.
<Result>
6.3 Re-set label printer IP address
Customers can also make the label printer’s IP address to be in the same segment with the PC by re-setting the
printer’s IP address.
1) Please press [SYSTEM SET] key and hold for seconds to enter into the menu status.
2) Press key [ ] and [ ] till the LCD display “IP”
3) Please press [Enter] key.
4) Input the new IP address directly but it should be in the same segment with your computer. For example：If
your computer IP address is 172.255.1.120, then the label printer IP address you should set is 172.255.1.XXX.
7 HOW TO UPDATE PROGRAM
Double click link32.exe , and follow below steps to update the program.
17
Click “Network”, and
then click “Update
program”.
Click here to choose
the file the program
located.
18
Select the program
Click the button
“Open”
19
8 HOW TO DOWNLOAD FONT
1 Double click
this column to
input the name.
3 Double click
this column to
input IP address.
2 Double click
this column to
select it.
4 click it, and then will
pop up below window
5 tick it and click OK.
Choose and click link32, and follow below steps to download the font.
20
9 HOW TO CREATE PLU DATA
If the LP isn’t connected
to scale, here you should
choose ‘PCS’. Or the
label cannot be printed.
Select ‘TCP/IP’.
Input the LP’s IP
address here.
1. Click open “PLU manager” and edit PLU information.
2. Click button
3. Save the PLU data
21
You can also import PLU data from excel file
22
10 HOW TO DOWNLOAD PLU TO LP1 PRINTER
Click this button
You can distribute the hotkey by “PLU manager”.
1) Download a PLU file:
Click , select a PLU file, and click “open” to download it.
2) Click button to download it to the scale.
23
11 HOW TO CREATE AND PRINT HOTKEY
Choose this hotkey sheet
type.
1. Choose ‘Preferences’ in PLU Manager:
24
2. Click ‘File/Hotkey sheet input’ to set the hotkey table in the following interface:
Double click the blank
to choose the PLU.
Or right click to choose
“Select All”
first page: Font --- set the characters’ font on hotkey table.
Load Plu --- click this item, you can choose the PLU in the pop-up window:
25
Background --- set background color for the hotkey table.
Clear --- clear all messages on the hot key table.
default background --- set the default background color of the hotkey table.
Event:
1) Tare
2) Zero
3) Country
4) Company
5) Show time
Note: Users could set any one of the 72 numerical key as Tare, Zero, Country, Company or
Show Time.
E.g. the key No.1 has been set for the hotkey of apple. If we choose ‘ZERO’ for key No.1 as the
following picture, it will be a hotkey of ‘Zero’ rather than a hotkey of apple. But the functions of
other hotkeys still remain.
Analogically, if we choose ‘Show time’ for key No.2, its hotkey function as grape is deleted. And
the current time will display on the LCD of the printer if we press key No.2 next time.
26
Second page: you can set two levels of each hotkey. This item is to set the second level on hotkey table. It is
similar to the item ‘first page’.
all page: Font --- set the characters’ font on hotkey table.
Clear --- clear all messages on the hot key table.
Default Font --- set the characters’ default font on hotkey table.
Price Visible --- set whether to show the price of each PLU on the hotkey table.
Load Image --- set image for the corresponding PLU.
Delete Image --- delete the selected image.
Use second page: choose this item to use the second level on hotkey table.
Cancel second page: this is to cancel all messages of the second level on hotkey table.
Note:
1. If you want to sell the PLU by using second page hotkey, please press key [ PLU] and then enter
hotkey number. For example: use hotkey 37. Press key [PLU][37].
2. You also can create the hotkey table by this method: click ‘File/Hotkey sheet input’ to enter the
hotkey setting interface, press the button ‘Create’, and then the whole hotkey table will be created
automatically.
27
3. Preview and print hotkey sheet
Click “Preview”
Click “Print”
28
4. Cut a hotkey sheet down and insert the hotkey sheet into the keyboard.
29
12 LABEL DESIGN
1. Open link32, and Click to open “label editor”.
2. Create a new label:
30
Input width
Input height
Choose the
tool bar
Note: in order to compatible with 2 inch machine, when 3 inch machine creates a new label of D0 or D1 format,
D0 or D1 cannot be set into a big label format which is the width can’t be longer than 56mm. Namely, if 3 inch
machine creates a new label which the format is any one from D2 to D41, the width of the label can be set
longer than 56mm.
3. Edit the label
1) Choose ‘component’ tool bar
31
2) Choose the components and edit them.
A B C D E F G H I J K L M N O
Edit the components here
Click each item in tool bar and then click the label, the label component will lay in the label, select the
component and keep it, the component can be moved to any position. When you are editing a barcode, you can
change the direction of the barcode by changing the value in right column ‘Direction’ item.
Click the item in the tool bar again to eliminate it; or you can click the component in the label and hold it,
and then drag it out of the label to eliminate it.
A，barcode；B，PLU name；C，average weight；D，weight；E，quantity；F，period of validity；G，package
date；H，Message 1；I，Message 2；J，fresh code；K，head message；L，foot message；M，tare；N，
Gross weight; O, Temporary information.
Note：The temporary information could be set as label number.
32
Choose the tool bar
A B C D E F G H I J K L
a b c d e f g
3) Edit background picture
Click the item in the tool bar, and then click the label to edit the label background. Click to select the
background and keep it, the background can be moved to any position.
Click to select the background and keep it, and drag it out of the label to eliminate it; or you can use
rubber in the tool bar to erase it.
A. Select; B. rubber; C. pencil; D. Text; E. fill in; F. beeline; G. rectangle
H. Fill in rectangle; I. round angle; J. fill in round angle rectangle; K. round; L. fill in round
a. Line thickness; b. fill in type; c. word font; d. word size; e. bold font f. italic g. underline
33
Choose preparative BMP graph
Choose label type
4) You can also paste a preparative BMP graph as the label background picture.
Note: this operation is dispensable.
5) Save the label
A kind of PLU can edit forty-two types of label, before you download the label, you need to choose label type.
So, before saving, you should choose label type.
34
1 Double click here
Choose the label
type from D0 to
D41 that you
have edit in last
step
Choose label type you have edited and downloaded in LAB.
Note: the label you have chosen in the Multi Label column of the PLU Manager should be edited and
downloaded to the LP1 printer in advance or you will hear the error “beep” when print this label by pressing
this PLU hotkey. If you don’t choose the label type, the system will auto-choose the default the label type D0 or
D1.
6) Set Label Number
After saving the label and downloading the label to the printer, please set label number in the printer.
a. Press key in the printer for about 2 seconds to enter system set mode.
b. Use key or to select the item ‘Label No.’ and press .
c. Then system prompts: <0: close 1-50000: Use>. Input number on the printer. If you input ‘0’, the label
number will not be printed out on the label. If you input a number from1 to 50000, the label number will start
from the number you input. Then press key to confirm.
E.g. If you want to set the first label from No.2, and then you should input 2 in the printer. Then the second
label number will be No.3 and the like.
35
13 SYSTEM SET MODE
Hotkey
System set
Description
<DATE>
Set date and time
A
<ALIGN>
Use arrow key to select one of the 17(-8~+8) different kinds of the excursion
and to adjust the paper to the most suitable initial state.
L
LABEL SELECT
Choose default label type D0 or D1
Label NO.
Set label number
S
PAPER
Using arrow to select paper type: label or no rewind
N
DATE FORMAT
Set date format.
PRINT WEIGHT UNIT
Whether print weight unit
PRICE FORMAT
Set price format
X
AMOUNT FORMAT
Set decimal point for total price.
BARCODE SET
Set barcode type
W
PRINT TIME
Set whether print time or not.
K
ROUND
Set round input a digit range from 0 to 10
Y
YEAR FORMAT
Set year format (2 or 4 digit).
D
DENSITY
Select printing density from “-1” to “5” with arrow.
E
MESSAGE 1
Set MESSAGE1 value.
F
MESSAGE 2
Reserved
BARCODE LINE WIDTH
Set barcode width in label
ANTI WIND
Open anti wind function
V
SPEED
Set print speed
STAT. MODE
Enter statistics mode
STAT. WARNNING?
Whether giving a warning when statistics data full
SCALE TYPE
Set the type of scale
PRN TUBTOT
Print summation label
PRN ALL STAT. PLU
Print statistics data by PLU
CLR STAT.
Clear statistics data
Press key for about 2 seconds to enter system set mode.
Use key or to select system set items:
36
13.1 Set parameters in PC software
Explanation:
Click it, then the
parameter in this dialog box will back to
the default status.
Export the current
parameter in this dialog box and save it
as a *.hex file.
Download the *.hex
file of the parameter that has just been
saved in last step.
After set all the parameter
in this dialog box, click it to download
the parameter to the scale.
Open link32, and Click ,
Figure function setting (part 1)
Basic functions explanation：
Paper type：0:label；1:receipt ；2:no-rewinder.0 is the default.
Barcode type：0~99 (refer to barcode type table).
Date format：0: DDMMYY; 1: MMDDYY; 2: YYMMDD (D，date；M，month；Y，year).
Decimal position：0，1，2；Set price decimal digit.
Rounding：Set round carry digit.
Message 2：Reserved
Display darkness：Reserved.
Label type：From D0 to D41
Package tolerance：1~20
37
Year format：0：YY; 1：YYYY.
Total price precision：1: N.N0; 2: N.NN; 3: N.N.
Message 1：0~197 message. If PLU data hasn’t set message1, this PLU data will be the default.
18 -barcode：0,width 2/5; 1,narrow width 2/5; 2, Ean 128; 3, narrow Ean 128.
Sale date adjust: The valid date and sale date are related in time: valid date=sale date + sale date adjust, or sale
date=valid date – sale date adjust. You can set the sale date adjust here to confirm the time interval
between the valid date and sale date.
Figure function setting (part 2)
Advanced functions explanation:
Print density：Reserved. Setting on the scale.
Align paper：-8~8 adjust print position.
Horizontal Offset：Reserved.
Print speed：0~7; 0: the fastest speed; 7: the slowest speed
The lower the speed is, the better the printing impression is.
(Note: don’t set too low speed, or the lifetime of the print head will be shortened)
Print direction：0~1; 0: Horizontal; 1: Vertical. This is to set the print direction of all the label in this software.
38
Account type：Reserved.
Drag the bar
to the bottom.
Here you can see
the title “set
barcode 99”.
① Click here
to choose the
name that you
need.
② Click the
triangle to set the
department
length.
③ Click here
to choose Price.
④ Click the triangle
to set the price
length.”PPPPP” is
five-digit number, so
Security functions explanation：
Set the password of the scale lock function.
Weight unit：Set the unit of calculating price.
13.2 Set barcode
Open link32, and Click ,
Let’s take an example to explain how to set the barcode.
If you want to print the barcode in this format:23PPPPPWWWWWC, where P is price,W is weight,and C is
control, you can follow below steps to set it.
Step 1: “ 23PPPPPWWWWWC” → set first two number “23”. You can choose the name that “23” stands for,
such as “23” stands for department.
Step 2: “ 23PPPPPWWWWWC” → set PPPPP
39
⑧ Choose “NULL”,
the system will automatic
generate one digit
number of control. .
⑤ Click here to
choose Weight.
⑥ Click the triangle to set the
price length,“PPPPP” is five-digit
number, so here you should set
⑦ Here you can set the
decimal point. If you set the
shift to 3, which means
system will print the weight
in the format“WW.WWW”.
If you don’t need decimal
Step 3: “ 23PPPPPWWWWWC” → set WWWWW
Step 3: “ 23PPPPPWWWWWC” → set “C”.
Note: if you want to set more digits of barcode, you can set them by the above method.
40
14 PRINT LABEL
PLU
Method
Example
PLU which hotkey number is in
the range of 1-36
Press the hotkey number
directly
Sell PLU which hotkey number is 20
PLU which hotkey number is in
the range of 37-72
Press key and
hotkey number
Sell PLU which hotkey number is 56
+
PLU without hotkey
Press key and the
PLU LFcode
Sell PLU which LFcode is 69025, and has no
hotkey number + [69025]
The printer supports 10000 kinds of PLU. You can set 72 kinds of them to hotkey.
Note: if the LP1X isn’t connected with the scale, then you should choose the unit of the PLU as ‘PCS’, or
the label cannot be printed. Please refer to Chapter 7, Point 1.
DLP101ENV0-09
Loading...