Pinnacle Systems Xpress Studio - 5.7 Installation Manual

Software Installation

®

Avid Xpress Studio

Page 1

©2007 Avid Technology, Inc. All Rights Reserved. Printed in USA.

Product features, specifications, and availability are subject to change without
notice. Avid, Avid Mojo, Avid Xpress, Digi 002, Digidesign, DigiTranslator,
DINR, DV Toolkit, make manage move | media, Mbox, and Pro Tools are
either registered trademarks or trademarks of Avid Technology, Inc. in the
United States and/or other countries. Adobe and After Effects are registered
trademarks of Adobe Systems Incorporated. iLok is a trademark of PACE
Anti-Piracy, Inc. QuickTime is a registered trademark of Apple Computer, Inc.
and is registered in the United States and other countries. VocALign is a
registered trademark of Synchro Arts Limited. Windows Media is a registered
trademark of Microsoft Corporation

All other trademarks contained herein are the property of their respective
owners.

Avid Xpress Studio Software Installation • 0130-07843-01A • March 2007

Page 2

.

Software Installation Instructions

The following instructions apply to the Avid Xpress® Studio
universal installer. This installation takes approximately 45 minutes.
At this point, you should have followed the instructions in the
Avid Xpress Studio Hardware Setup Instructions poster. Your system
must be turned on and external hardware devices turned off.

For important information, see the ReadMe before you install the

®

Avid

software. The ReadMe is available from the installation DVD.
To view the ReadMe files, you must have Acrobat
on your system.

What you need:

• Avid Xpress Studio installation DVD

• Avid application key (dongle)

•iLok

• DV Toolkit

• Avid Pro Tools

™

USB Smart Key

™

License Card

®

LE authorization code (located in DVD case)

• Sorenson Squeeze® serial number (located in DVD case)

• SmartSound

®

SonicFire® Pro serial number

• Contemporary Insights Audio Palette unlocking code

Installing the Avid Applications

These instructions are separated into sections. Complete all
instructions in the order presented. Avid recommends that you install
all applications from the Avid Xpress Studio installer, even if you only
need to install a single application.

®

Reader® Installed

If you are performing an upgrade, you must uninstall or remove any
previously installed applications. Refer to the ReadMe for further
instructions.

You need to use an account with administrative privileges.

You must install Windows Media

®

Player 10 and QuickTime® 7.1 or

later prior to installing Avid Xpress Studio.

1. To install QuickTime 7.1, go to www.quicktime.com and follow
the instructions provided.

Page 3

2. The Avid Mojo™ and Mbox™ must be turned off (unplugged).
The Digi 002 must be connected, just not turned on.

3. Quit all active applications.

4. Insert the Avid Xpress Studio installation DVD.
The Welcome Window opens.

5. Click Next.

6. Select your country in the Country Selection for License
Agreements window, and then click Next.

7. Enter your Customer Information, and then click Next.
The Choose Destination Location window opens.

8. Click Next.

9. Select the applications you want to install, and then click Next.
Two options are not selected: Avid Code cs LE and Avid

AfterEffects EMP (External Monitor Preview).
In order to install Avid AfterEffects EMP, you need to have

Adobe After Effects installed on your system.

The Ready to Install the Program window opens.

10. Click Install.
Avid DIO and its components install.

11. Follow the on-screen instructions.
If a dialog box opens stating that the driver has not passed the

Windows Logo testing; you can safely ignore the warning.
The Welcome window opens.

12. Click Next.
Avid Xpress Pro and its components install.

13. Follow the on-screen instructions.

Page 4

Completing the Installation

Avid 3D

1. Leave the default settings, and then click Next.

2. If you have not installed your Open GL card, a dialog box opens
asking if you want to install your Open GL card later or exit the
setup.

3. Follow the on-screen instructions.

Avid FX

Follow the on-screen instructions.

Avid DVD by Sonic

Follow the on-screen instructions.

Sorenson Squeeze

1. Follow the on-screen instructions.

2. You are prompted to enter a serial number for Sorenson Squeeze.

3. Locate the serial number in the DVD case, type it in, and then
click Next.

4. If a warning appears telling you that you must restart your
computer, click No. Do not restart at this time or your
installation will not complete.

Other Avid Applications

1. Follow the on-screen instructions until all additional Avid
applications install.

2. Click Finish.

Avid Pro Tools LE

1. From the Avid Pro Tools LE Select Components window, keep
the default selections, and also select DigiTranslator.

2. The two options that are not selected — Command|8 Controller
and Drivers and the MP3 Codec Update must only be installed if
you plan on having the Command|8 control surface connected to
your system. It is not recommended that you install this option if
you have a Digi 002 or Mbox. In order to install the MP3 Codec
Update, you must purchase the MP3 Codec through Digidesign

Page 5

®

.

Installing Drivers for the Digi 002 or Mbox

A dialog box opens asking you to connect your Digidesign
hardware.

1. Turn on the Digi 002 (or turn on your Mbox by plugging it in).

2. Wait for it to power up completely, and then click OK.

3. From the Welcome Window, click Next.

4. If the Windows Logo Testing window opens, click Continue
Anyway.

5. Click “No, do not restart.” Wait until Avid Xpress Studio is
completely installed. Then select “Yes” to restart, and click
Finish on the installer window.

Inserting the Avid Application Key and iLok USB
Smart Key

1. Insert the Avid application key and then the iLok USB Smart Key
into the USB connections on your computer.

The Found New Hardware Wizard dialog box opens after the
iLok is inserted.

2. Follow the instructions in the Hardware Wizard, and then click
Finish.

Installing Avid Mojo (for Avid Xpress Studio
Complete Users Only)

1. Turn on your Avid Mojo by plugging it in.
Wait for the Found New Hardware Wizard to open.

2. From the Welcome Window, click Next.

3. Continue to follow the instructions in the Hardware Wizard, and
then click Next.

The Windows Logo testing window opens.

4. Click Continue Anyway.

5. Click Finish.

Page 6

Authorizing Avid Pro Tools LE

1. Double-click the Avid Pro Tools LE icon on your desktop to
open it.

The Broadband Noise Reduction LE (DINR
authorization window opens.

2. Click Authorize.
You are prompted to insert the DV Toolkit License Card into the

iLok USB Smart Key.

3. Separate the DV Toolkit cutout from the larger protective card by
pulling it up and out with your thumb. Do not force the cutout
down.

4. Insert the cutout into the iLok. Visually verify that the metal
portion of the cutout makes contact with the iLok’s metal
card reader.

5. Click Next.
You are prompted three more times to authorize additional plug-

ins: VocALign

™

, DV Toolkit, and DigiTranslator™.

6. For each Authorization window, click Authorize.
You are prompted to register each plug-in and the iLok.

7. After the authorization is complete, remove the cutout from the
iLok.

8. Click Finish.
You are prompted for the Authorization code for Pro Tools LE.

9. Locate the Authorization code in the installation DVD case.

10. Type in the code, and then click Validate.
The installation is complete.

™

) plug-in

Page 7

Instructions d'installation du logiciel

Les instructions suivantes concernent le programme d'installation
universel Avid Xpress Studio. L'installation prend environ 45 minutes.
À ce stade, vous devriez avoir suivi les instructions du document
Instructions de configuration matérielle Avid Xpress Studio. Vous
devez mettre sous tension le système et mettre hors tension les
périphériques matériels externes.

Pour des informations importantes, consultez le fichier Lisez-moi
(ReadMe) avant d'installer le logiciel Avid. Ce fichier se trouve sur le
DVD d'installation. Pour regarder les fichiers Lisez-moi, vous devez
avoir Acrobat Reader installé sur votre système.

Éléments requis:

• DVD d'installation Avid Xpress Studio

• Clé électronique (dongle)

• iLok USB Smart Key

• Carte de licence DV Toolkit

• Code d'autorisation Avid Pro Tools LE (indiqué sur le boîtier du
DVD)

• Numéro de série Sorenson Squeeze (indiqué sur le boîtier du
DVD)

• Numéro de série de SmartSound

• Code de déverrouillage de la palette audio Contemporary
Insights

®

SonicFire® Pro

Installation des applications Avid

Ces instructions sont classées par sections. Suivez toutes les
instructions dans l'ordre présenté. Nous vous conseillons d'installer
toutes les applications à l'aide du programme d'installation
Avid Xpress Studio, même si vous n'avez réellement besoin que d'une
seule application.

Si vous procédez à une mise à niveau, vous devez désinstallez les
applications installées précédemment. Reportez-vous au fichier Lisez­moi pour plus d'informations.

Vous devez utiliser un compte disposant de privilèges administratifs.

Page 8

Vous devez installer Windows Media Player 10 et QuickTime 7.1 ou
une version ultérieure avant d'installer Avid Xpress Studio.

1. Pour installer QuickTime 7.1, visitez le site www.quicktime.com
et suivez les instructions fournies.

2. Vous devez mettre hors tension les matériels Avid Mojo et Digi
002, ou vous devez déconnecter le Mbox. Le Digi 002 doit
également être connecté.

3. Fermez toutes les applications ouvertes.

4. Insérez le DVD d'installation Avid Xpress Studio.
La fenêtre d'accueil s'ouvre.

5. Cliquez sur Suivant (Next).

6. Dans la fenêtre de sélection du pays pour l'accord de licence,
sélectionnez votre pays, puis cliquez sur Suivant (Next).

7. Spécifiez vos informations de client (Customer Information),
puis cliquez sur Suivant (Next).

La fenêtre de sélection de l'emplacement de destination (Choose
Destination Location) s'affiche.

8. Cliquez sur Suivant (Next).

9. Sélectionnez les applications que vous désirez installer, puis
cliquez sur Suivant (Next).

Deux options ne sont pas sélectionnées : Avid Codecs LE et
Adobe After Effects (External Monitor Preview).

Vous ne pouvez installer Avid AfterEffects EMP que si votre
système dispose d'Adobe After Effects.

La fenêtre Prêt à installer le programme (Ready to Install the
program) s'ouvre.

10. Cliquez sur Installer (Install).
L'installation d'Avid DIO et de ses composants est lancée.

11. Suivez les instructions affichées à l'écran.
Une boîte de dialogue s'ouvre, indiquant que le pilote n'est pas

conforme Windows. Vous pouvez ignorer ce message d'erreur.
La fenêtre d'accueil s'ouvre.

12. Cliquez sur Suivant (Next).
L'installation d'Avid Xpress Pro et de ses éléments démarre.

13. Suivez les instructions affichées à l'écran.

Page 9