For increased operational speed and ease of use, there are many Pro Tools®| Software keyboard and
Right-click shortcuts to give you fast access to a wide variety of Pro Tools tasks.
Menu commands display their corresponding keyboard shortcut (if available) on-screen in the menu, to
the right of the menu command.
Conventions Used in This Guide
Pro Tools documentation uses the following conventions to indicate menu choices, keyboard commands,
and mouse commands:
:
ConventionAction
File > SaveChoose Save from the File menu
Control+NHold down the Control key and press the N key
Control-clickHold down the Control key and click the mouse but-
ton
Right-clickClick with the right mouse button
The names of Commands, Options, and Settings that appear on-screen are in a different font.
The following symbols are used to highlight important information:
User Tips are helpful hints for getting the most from your Pro Tools system.
Important Notices include information that could affect your Pro Tools project data or the performance
of your Pro Tools system.
Shortcuts show you useful keyboard or mouse shortcuts.
Cross References point to related sections in this guide and other Avid documentation.
Chapter 1: Introduction to Pro Tools Shortcuts1
How to Use this PDF Guide
This PDF provides the following useful features:
• The Bookmarks on the left serve as a continuously visible table of contents. Click on a subject heading
to jump to that page.
• Click a + symbol to expand that heading to show subheadings. Click the – symbol to collapse a subheading.
• The Table of Contents provides active links to their pages. Select the hand cursor, allow it to hover over
the heading until it turns into a finger. Then click to locate to that subject and page.
• All cross references in
• Select Find from the Edit menu to search for a subject.
• When viewing this PDF on an iPad, it is recommended that you open the file using iBooks to take advantage of active links within the document. When viewing the PDF in Safari, touch the screen, then
touch
Open in “iBooks”.
blue are active links. Click to follow the reference.
Chapter 1: Introduction to Pro Tools Shortcuts2
Resources
The Avid website (www.avid.com) is your best online source for information to help you get the most out
of Pro Tools.
Account Activation and Product Registration
Activate your product to access downloads in your Avid account (or quickly create an account if you do not
have one). Register your purchase online, download software, updates, documentation, and other resources.
www.avid.com/account
Support and Downloads
Contact Avid Customer Success (technical support), download software updates and the latest online manuals, browse the Compatibility documents for system requirements, search the online Knowledge Base or
join the worldwide Avid user community on the User Conference.
www.avid.com/support
Training and Education
Study on your own using courses available online, find out how you can learn in a classroom setting at an
Avid-certified training center, or view video tutorials and webinars.
www.avid.com/education
Video Tutorials
The Get Started Fast with Pro Tools series of online videos provide tutorials to help if you are new to
Pro Tools. They also provide videos for the experienced user that introduce new features found in the latest
versions of Pro Tools.
Click to select first item, then
Shift-click another to select all
similar items between (applicable
items listed above)
Click to select first item, then
Command-click to select the next
item (applicable items listed
above)
• paths in I/O Setup
Click to select first item, then
Shift-click another to select all
similar items between (applicable
items listed above)
Click to select first item, then
Control-click another to select the
next item (applicable items listed
above)
Chapter 2: Global Keyboard Shortcuts5
Chapter 3: Commands Keyboard Focus
Shortcuts
Commands Keyboard Focus provides single-key shortcuts for a range of edit and play commands. Avid as
well as other vendors supply custom keyboards and overlays for Mac and Windows labeled with Pro Tools
commands when in Commands Keyboard Focus.
Pro Tools Custom Keyboard labeld with keyboard commands (Mac keyboard shown)
To enable Commands Keyboard Focus, do one of the following:
Click the a–z button for the Edit window.
Press Command+Option+1 (Mac) or Control+Alt+1 (Windows).
The following table lists all Commands Keyboard Focus key command mappings in QWERTY keyboard
order (from left to right and top to bottom):
ActionCommands Focus Shortcut
Recall Zoom Memory 11
Recall Zoom Memory 22
Recall Zoom Memory 33
Recall Zoom Memory 44
Recall Zoom Memory 55
Play To Edit Start6
Chapter 3: Commands Keyboard Focus Shortcuts6
ActionCommands Focus Shortcut
Play From Edit Start7
Play To Edit End8
Play From Edit End9
Edit Selection To Timeline Selection0
Toggle Playlist View Mode for tracks containing the Edit selection:
audio tracks between waveform and volume view
MIDI and Instrument tracks between notes and clips view
Display Timeline Selection StartQ
Display Timeline Selection EndW
Zoom ToggleE
Zoom Out HorizontalR
Zoom In HorizontalT
Move Clip Start To Current TimecodeY
Move Clip Sync Point To Current TimecodeU
Snap Clip End To Current TimecodeI
Timeline Selection To Edit SelectionO
Move Edit Insertion To Previous TrackP
Play Edit Selection[
Play Timeline Selection]
Nudge Play Earlier By Grid\
Trim Clip Start To CursorA
Trim Clip End To CursorS
- (hyphen)
Fade from StartD
Crossfade With No DialogF
Fade Out From Cursor To End Of ClipG
Snap Clip Start To Play PositionH
Snap Clip Sync Point To Play PositionJ
Snap Clip End To Play PositionK
Chapter 3: Commands Keyboard Focus Shortcuts7
ActionCommands Focus Shortcut
Move Edit Insertion To Previous EditL
Move Edit Insertion To Next Track; (semicolon)
Move Edit Insertion To Next Edit’ (single quote)
UndoZ
RedoShift+Z
CutX
CopyC
PasteV
SeparateB
Toggle Insertion Follows PlaybackN
Nudge Play Earlier By Next Bigger GridM
Nudge Play Earlier By Grid, (comma)
Nudge Play Later By Grid. (period)
Nudge Play Later By Next Bigger Grid/
Chapter 3: Commands Keyboard Focus Shortcuts8
Chapter 4: Dashboard Shortcuts
ActionMacWindows
Sign in or Sign outiCommand+SControl+S
Select Create tabCommand+1Control+1
Select Recent tabCommand+2Control+2
Select Projects tabCommand+3Control+3
Type menu (Project or Session)Command+Left/Right ArrowControl+Left/Right Arrow
Enable or disable the Create from Template option
Toggle through Template GroupsOption+Up/Down ArrowsAlt+Up/Down Arrows
Navigate through focused Template,
Session, or Project list
Toggle between Files types (WAV or
AIFF)
Toggle through Bit Depth options
(16-bit, 24-bit, or 32-bit floating)
Toggle through Sample Rate optionsCommand+RControl+R
Toggle through the available IO Setup
options
Enable or disable the Interleaved optionCommand+GControl+G
Open from Disk (sessions only)Command+OControl+O
Select the item at the top or bottom of the
displayed list
Scroll up or down through focused Template, Session, or Project list
Command+TControl+T
Up/Down ArrowsAlt+Up/Down Arrows
Command+FControl+F
Command+BControl+B
Command+IControl+I
Home/EndHome/End
Page Up/DownPage Up/Down
Chapter 4: Dashboard Shortcuts9
Chapter 5: Edit Window and Mix Window
Keyboard Shortcuts
Pro Tools provides keyboard shortcuts for many Edit window and Mix window operations, as well as
many Transport commands.
Playback
ActionMacWindows
Start/stop playbackSpacebarSpacebar
Half-speed playbackShift+SpacebarShift+Spacebar
Pause (pre-prime deck for instant playback
and record)
Enable/disable online playbackCommand+J, or
Center on selection start/endLeft/Right Arrow keys (when
Play Edit selectionOption+[Alt+[
Back/Forward (move the playback location
backwards/forwards by the Back/Forward
amount) (Pro Tools | Ultimate Software only)
Back/Forward and Play (move the playback
location backwards/forwards by Back/
Forward amount and then begin playback)
(Pro Tools Ultimate only)
Extend a selection backwards by the
Back/Forward amount (Pro Tools Ultimate
only)
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts10
Control+Spacebar, or Optionclick, on Transport Play button
Option+Spacebar
selection exceeds window
view)
Command+Transport
Rewind button or Transport
Fast Forward button
Command+Option+Transport Rewind button or Transport Fast Forward button
Shift+Command+Transport
Rewind button or Transport
Fast Forward button
Start+Spacebar, or Alt-click
on Transport Play button
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts11
Control-click on Transport
Record Enable button
Command+Spacebar, F12,
or click Transport Record
button*
Control+Alt+Spacebar
Control-click on track Record
Enable button
Start-click on Transport
Record Enable button
Control+Spacebar, F12, or
click Transport Record
Enable button
ActionMacWindows
DestructivePunch or TrackPunch
enable/disable an audio track
(Pro Tools Ultimate and Pro Tools with Complete Production Toolkit only)
DestructivePunch or TrackPunch enable/disable all audio tracks (Pro Tools Ultimate and
Pro Tools with Complete Production Toolkit
only)
DestructivePunch or TrackPunch
enable/disable all selected audio tracks
(Pro Tools Ultimate only)
Simultaneously DestructivePunch or
TrackPunch enable/disable and record
enable/disable all audio tracks
(Pro Tools Ultimate only)
Simultaneously DestructivePunch or
TrackPunch enable/disable and record
enable/disable all selected audio tracks
(Pro Tools Ultimate only)
Temporarily force all VCA slave tracks to
toggle their record enable status
(Pro Tools Ultimate only)
Temporarily force all VCA slave tracks to toggle their Track Input status
(Pro Tools Ultimate only)
Control-click the track’s
Record Enable button
Option-Control-click a track’s
Record Enable button
Control-Option-Shift-click a
track’s Record Enable button
Option-click a track’s Record
Enable button
Option-Shift-click a track’s
Record Enable button
Option-click the VCA Record
Enable button
Option-click the VCA TrackInput button
Start-click the track’s Record
Enable button
Alt-Start-click a track’s
Record Enable button
Start-Alt-Shift-click a track’s
Record Enable button
Alt-click a track’s Record
Enable button
Alt-Shift-click a track’s
Record Enable button
Alt-click the VCA Record
Enable button
Alt-click the VCA TrackInput
button
Enable or disable pre/post-roll timeCommand+KControl+K
Set and enable pre/post-roll timeOption-click with Selector
before or after selection
Disable and set to zero pre/post-roll timeOption-click within selection
closer to front or back
Alt-click with Selector tool
before or after selection
Alt-click within selection
closer to front or back
*Some Pro Tools recording shortcuts use the same key commands as some Mac OS X shortcuts. If you
want to retain use of these key commands in Pro Tools, these Mac OS X shortcuts must be disabled or remapped.
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts12
Transport Mode (Numeric Keypad)
The following shortcuts apply when you select Numeric Keypad: Transport in the Operations
Preferences page.
ActionMacWindows
Play/Stop00
Rewind11
Fast Forward22
Record Enable33
Loop Playback mode on/off44
Loop Record mode on/off55
QuickPunch mode on/off66
Click on/off77
Countoff on/off88
MIDI Merge/Replace mode on/off99
Shuttle Mode (Numeric Keypad)
(Pro Tools Ultimate Only)
The following shortcuts apply when you select Shuttle mode in the Operations Preferences page.
ActionMacWindows
1 x Forward playback speed66
1 x Rewind playback speed44
4 x Forward playback speed99
4 x Rewind playback speed77
1/4 x Forward playback speed33
1/4 x Rewind playback speed11
1/2 x Forward playback speed5+65+6
1/2 x Rewind playback speed5+45+4
2 x Forward playback speed8+98+9
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts13
ActionMacWindows
2 x Backward playback speed8+78+7
1/16 x Forward playback speed2+32+3
1/16 x Backward playback speed2+12+1
Loop playback of Edit Selection00
Recall Memory LocationPeriod (.)+Memory
Location+Period (.)
Period (.)+Memory
Location+Period (.)
Scrub (Jog)/Shuttle
ActionMacWindows
Temporary Scrub mode when using SelectorControl-click and dragStart-click and drag
Extend selection while scrubbingShift-click and drag with the
Scrubber tool, (also in
temporary Scrub mode)
ShuttleOption-click-drag with
Scrubber tool, (also in
temporary Scrub mode)
Shuttle Lock (Classic or Transport mode)Control+number key 1–9
(1=minimum, 5=real-time,
9=maximum)
Change direction during Shuttle Lock
(Classic or Transport mode)
Shuttle Lock stop (Classic or Transport mode)0 (press number key to
Plus/Minus (+/–) keys
For example, Control+
number+Minus (–) key
resume shuttle)
Shift-click and drag with the
Scrubber, (also in temporary
Scrub mode)
Alt-click-drag with Scrubber,
(also in temporary Scrub
mode)
Plus/Minus (+/–) keys
For example, Start+
number+Minus (–) key
0 (press number key to
resume shuttle)
Exit Shuttle Lock mode (Classic or Transport
mode)
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts14
Spacebar or Escape (Esc)
key
Spacebar or Escape (Esc)
key
Auditioning (Transport = Pro Tools)
The following shortcuts are active only when Transport = Pro Tools.
ActionMacWindows
Play by pre-roll value up to selection start/end
(or current location if no selection)
Play by post-roll value from selection
start/end (or current cursor location if no
selection)
Play by pre- and post-roll value through
selection start/end
Option+
Left/Right Arrow keys
Command+
Left/Right Arrow keys
Command+Option+
Left/Right Arrow keys
Alt+
Left/Right Arrow keys
Control+
Left/Right Arrow keys
Control+Alt+
Left/Right Arrow keys
Auditioning (Transport = MMC)
The following shortcuts are active only when Transport = MMC.
ActionMacWindows
Cue Transport to selection start/endCommand+
Left/Right Arrow keys
Cue Transport with pre/post-roll to selection
start/end
Option+
Left/Right Arrow keys
Control+Left/Right Arrow
keys
Alt+Left/Right Arrow keys
Edit Modes and Edit Tools
ActionMacWindows
Shuffle modeF1, or Option+1
(on computer keyboard)
Slip modeF2, or Option+2
(on computer keyboard)
Spot modeF3, or Option+3
(on computer keyboard)
Grid modeF4, or Option+4
(on computer keyboard)
Enable Snap To Grid while in another Edit
mode
Enable Snap to Grid and Shuffle modeF1+F4F1+F4
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts15
Shfit+F4Shfit+F4
F1, or Alt+1
(on computer keyboard)
F2, or Alt+2
(on computer keyboard)
F3, or Alt+3
(on computer keyboard)
F4,or Alt+4
(on computer keyboard)
ActionMacWindows
Enable Snap to Grid and Slip modeF2+F4F2+F4
Enable Snap to Grid and Spot modeF3+F4F3+F4
Zoomer toolF5, or Command+1
(on computer keyboard)
Trimmer toolF6, or Command+2
(on computer keyboard)
Selector toolF7, or Command+3
(on computer keyboard)
Grabber toolF8, or Command+4
(on computer keyboard)
Scrubber toolF9, or Command+5
(on computer keyboard, if
F5, or Control+1
(on computer keyboard)
F6, or Control+2
(on computer keyboard)
F7, or Control+3
(on computer keyboard)
F8, or Control+4
(on computer keyboard)
F9, or Control+5
(on computer keyboard)
Mac OS X Expose is
disabled)
Pencil toolF10, or Command+6
(on computer keyboard, if
F10, or Control+6
(on computer keyboard)
Mac OS X Expose is
disabled)
Smart ToolF6+F7, F7+F8, or
Command+7 (on computer
F6+F7, F7+F8, or Control+7
(on computer keyboard)
keyboard)
Cycle through Edit modesSingle Open Quote (‘) key,
located above the Tab key
Single Open Quote (‘) key,
located above the Tab key
Cycle through Edit toolsEscape (Esc) keyEscape (Esc) key, or
Center-click
Lock out or unlock Shuffle ModeCommand-click the Shuffle
button
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts16
Control-click the Shuffle but-
ton
Edit Selection, Definition, and Navigation
ActionMacWindows
Enable or disable Tab to Transients commandCommand+Option+TabControl+Alt+Tab
Locate cursor to next transientTab (if Tab to Transient
enabled)
Locate cursor to previous transientOption+Tab (if Tab to Tran-
sient enabled)
Locate cursor to next Clip-boundary/sync
point
Locate cursor to previous Clip boundary/sync
point
Go to and select next ClipControl+Tab or
Go to and select previous ClipControl+Option+Tab or
Go to Song StartControl+ReturnStart+Enter
Extend selection to Song StartShift+Control+ReturnShift+Start+Enter
Extend selection to next Clip-boundaryShift+TabShift+Tab
Extend selection to previous Clip-boundaryOption+Shift+TabControl+Shift+Tab
Extend selection to include next ClipControl+Shift+Tab or
Extend selection to include previous ClipControl+Shift+Option+Tab or
Tab (if Tab to Transients is
disabled)
Option+Tab (if Tab to
Transients is disabled)
Command+Control+’
Command+Control+L
Command+Control+Shift+’
Command+Control+Shift+L
Tab (if Tab to Transient
enabled)
Control+Tab (if Tab to Tran-
sient enabled)
Tab (if Tab to Transients is
disabled)
Control+Tab (if Tab to Tran-
sients is disabled)
Start+Tab or Control+Start+’
Control+Start+Tab or
Control+Start+L
Start+Shift+Tab or
Control+Start+Shift+’
Start+Shift+Control+Tab or
Control+Start+Shift+L
Return to start of sessionReturnEnter
Go to end of sessionOption+ReturnControl+Enter
Extend selection to start of sessionShift+ReturnShift+Enter
Extend selection to end of sessionOption+Shift+ReturnControl+Shift+Enter
Link Timeline and Edit selectionShift+Forward Slash (/)Shift+Forward Slash (/)
Set selection start/end during playbackDown/Up Arrow keysDown/Up Arrow keys
Set selection start/end to incoming time code
while stopped
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts17
Down/Up Arrow keysDown/Up Arrow keys
ActionMacWindows
Select entire Clip in Edit windowDouble-click with SelectorDouble-click with Selector
tool
Select entire track in Edit windowTriple-click with Selector, or
single-click in trackand press
Command+A
Select all Clips in all tracks in Edit windowReturn, then press Com-
mand+A
Extend cursor or selection across all tracksEnable “All” Edit group and
Shift-click on any other track
Cancel Zoom toggle and remain at the same
zoom level
Fit all shown tracks in the Edit windowCommand+Option+Control+
Record enable tracks that contain the
Edit cursor or Edit selection
TrackInput Monitor enable tracks that contain
the Edit cursor or Edit selection
(Pro Tools Ultimate only)
Solo tracks that contain the Edit cursor or
Edit selection
Mute tracks that contain the Edit cursor or
Edit selection
Move MIDI Record Enable to the previous
MIDI or Instrument track
Option+Shift+EAlt+Shift+E
Up arrow or Down arrow
Shift+RShift+R
Shift+IShift+I
Shift+SShift+S
Shift+MShift+M
Command+Up ArrowControl+Up Arrow
Triple-click with Selector tool,
or single-click in track and
press Control+A
Enter, then press Control+A
Enable “All” Edit group and
Shift-click on any other track
Control+Alt+Start+Up arrow
or Down arrow
Move MIDI Record Enable to the next MIDI or
Instrument track
Move the insertion to the beginning of the
Edit selection
Move the insertion to the end of the
Edit selection
Increase or decrease the height of any
lane that contains the Edit cursor or an Edit
selection*
Command+Down ArrowControl+Up Arrow
Down arrowDown arrow
Up arrowUp arrow
Control+Up/Down ArrowStart+Up/Down Arrow
*Some Pro Tools edit selection, definition, and navigation shortcuts use the same key commands as some
Mac OS X shortcuts. If you want to retain use of these key commands in Pro Tools, these Mac OS X shortcuts must be disabled or remapped.
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts18
Loading...
+ 53 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.