For a current and complete list of Avid trademarks visit: www.avid.com/legal/trademarks-and-other-notices
Bonjour, the Bonjour logo, and the Bonjour symbol are trademarks of Apple Computer, Inc.
Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S. and/or other countries.
This product may be protected by one or more U.S. and non-U.S. patents. Details are available at www.avid.com/patents.
Product features, specifications, system requirements, and availability are subject to change without notice.
For increased operational speed and ease of use, there are many Pro Tools®| Software keyboard and
Right-click shortcuts to give you fast access to a wide variety of tasks.
Menu commands that have a keyboard shortcut display their keyboard shortcut on-screen, to the right of
the menu command.
Conventions Used in Documentation
Pro Tools documentation uses the following conventions to indicate menu choices and key commands:
ConventionAction
File > Save SessionChoose Save Session from the File menu.
Command+N/Control+NHold down the Command (Apple) key (Mac)
Option+Plus/Minus (+/–) keysHold down the Option key and press the Plus (+) or Minus (–) key (on numeric
Command-click (Mac Only)Hold down the Command key and click the mouse button.
Right-clickClick with the right mouse button.
Chapter 1: Introduction to ProTools Shortcuts1
or the Control (Ctrl) key (Windows) and press the N key.
keypad or computer, as noted).
Chapter 2: Global Keyboard Shor tcuts
Global keyboard shortcuts apply to many functions in Pro Tools (such as changing a parameter).
Parameter Change
Pro Tools provides global keyboard shortcuts for changing the following parameters:
• Automation mode
• Monitor mode
• playlist enable
• record, solo and mute enable
• record and solo safes
• inserting plug-ins
ActionMacWindows
• I/O, bus, send assignment
• volume/peak indicator
• extend Edit or Timeline selection
• track height
• clear clip meter
Change parameter on all
channel strips
Change parameter on all
selected channel strips
Option+applicable function (applicable
functions listed above)
Option+Shift+applicable function (applicable functions listed directly above)
Alt+applicable function (applicable functions listed above)
Alt+Shift+applicable function
(applicable functions listed above)
Toggle
Pro Tools provides global keyboard shortcuts for changing the following parameters:
• Tracks in Track List
• Group enables/activation
ActionMacWindows
Toggle item and set all others
to same new state
Toggle item and set all others
to opposite state (Groups and
Memory Locations only)
Chapter 2: Global Keyboard Shortcuts2
Option-click on applicable item (applicable items listed above)
Command-click on applicable item
(applicable items listed directly above)
• Memory Location parameters
• Automation Enable window
Alt-click on applicable item
(applicable items listed above)
Control-click on applicable item
(applicable items listed above)
Fine Adjustment
Pro Tools provides global keyboard shortcuts for the following types of fine adjustment:
• Plug-in parameter editing
• fader movement
• scrubbing
ActionMacWindows
• automation data trimming
• Clip Gain
• MIDI Control data
Fine tune an item (Fine Adjust
mode)
Command-click on applicable
fader/pot/breakpoint function
(applicable functions listed above)
Control-click on applicable
fader/pot/breakpoint function
(applicable functions listed above)
Multi-Select
Pro Tools provides global keyboard shortcuts for selecting the following items:
Click to select first item, then
Shift-click another to select all
similar items between (applicable
items listed above)
Click to select first item, then
Command-click to select the next
item (applicable items listed
above)
• paths in I/O Setup
Click to select first item, then
Shift-click another to select all
similar items between (applicable
items listed above)
Click to select first item, then
Control-click another to select the
next item (applicable items listed
above)
Chapter 2: Global Keyboard Shortcuts3
Chapter 3: Commands Keyboard Focus
Shortcuts
Commands Keyboard Focus provides single-key shortcuts for a range of edit and play commands.
ActionCommands Focus Shortcut
Play Edit Selection[
Play Timeline Selection]
Nudge Play Later By Next Bigger Grid/
Nudge Play Earlier By Grid\
Nudge Play Earlier By Grid,
Nudge Play Later By Grid.
Timeline Selection To Edit Selection0
Move Edit Insertion To Next Edit‘
Move Edit Insertion To Next Track;
Recall Zoom Memory 11
Recall Zoom Memory 22
Recall Zoom Memory 33
Recall Zoom Memory 44
Recall Zoom Memory 55
Play To Edit Start6
Play From Edit Start7
Play To Edit End8
Play From Edit End9
Trim Clip Start To CursorA
SeparateB
Chapter 3: Commands Keyboard Focus Shortcuts4
ActionCommands Focus Shortcut
CopyC
Fade from StartD
Zoom ToggleE
Crossfade With No DialogF
Fade Out From Cursor To End Of ClipG
Snap Clip Start To Play PositionH
Snap Clip End To Current TimecodeI
Snap Clip Sync Point To Play PositionJ
Snap Clip End To Play PositionK
Move Edit Insertion To Previous EditL
Nudge Play Earlier By Next Bigger GridM
Toggle Insertion Follows PlaybackN
Edit Selection To Timeline SelectionO
Move Edit Insertion To Previous TrackP
Display Timeline Selection StartQ
Zoom Out HorizontalR
Trim Clip End To CursorS
Zoom In HorizontalT
Move Clip Sync Point To Current TimecodeU
PasteV
Display Timeline Selection EndW
CutX
Move Clip Start To Current TimecodeY
UndoZ
RedoShift+Z
Toggle Playlist View Mode-
Chapter 3: Commands Keyboard Focus Shortcuts5
Chapter 4: Dashboard Shortcuts
ActionMacWindows
Sign in or Sign outiCommand+SControl+S
Select Create tabCommand+1Control+1
Select Recent tabCommand+2Control+2
Select Projects tabCommand+3Control+3
Type menu (Project or Session)Command+Left/Right ArrowControl+Left/Right Arrow
Enable or disable the Create from Tem-
plate option
Toggle through Template GroupsOption+Up/Down ArrowsAlt+Up/Down Arrows
Navigate through focused Template,
Session, or Project list
Toggle between Files types (WAV or
AIFF)
Toggle through Bit Depth options
(16-bit, 24-bit, or 32-bit floating)
Toggle through Sample Rate optionsCommand+RControl+R
Toggle through the available IO Setup
options
Enable or disable the Interleaved optionCommand+GControl+G
Open from Disk (sessions only)Command+OControl+O
Select the item at the top or bottom of the
displayed list
Scroll up or down through focused Tem-
plate, Session, or Project list
Command+TControl+T
Up/Down ArrowsAlt+Up/Down Arrows
Command+FControl+F
Command+BControl+B
Command+IControl+I
Home/EndHome/End
Page Up/DownPage Up/Down
Chapter 4: Dashboard Shortcuts6
Chapter 5: Edit Window and Mix Window
Keyboard Shortcuts
Pro Tools provides keyboard shortcuts for many Edit window and Mix window operations, as well as
many Transport commands.
Playback
ActionMacWindows
Start/stop playbackSpacebarSpacebar
Half-speed playbackShift+SpacebarShift+Spacebar
Pause (pre-prime deck for instant playback
and record)
Enable/disable online playbackCommand+J, or
Center on selection start/endLeft/Right Arrow keys (when
Play Edit selectionOption+[Alt+[
Back/Forward (move the playback location
backwards/forwards by the Back/Forward
amount) (Pro Tools| Ultimate Software only)
Back/Forward and Play (move the playback
location backwards/forwards by Back/
Forward amount and then begin playback)
(Pro ToolsUltimate only)
Extend a selection backwards by the
Back/Forward amount (Pro Tools Ultimate
only)
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts7
Control+Spacebar , or Optionclick, on Transport Play button
Option+Spacebar
selection exceeds window
view)
Command+Transport
Rewind button or Transport
Fast Forward button
Command+Option+Transport Rewind button or Transport Fast Forward button
Shift+Command+Transport
Rewind button or Transport
Fast Forward button
Start+Spacebar, or Alt-click
on Transport Play button
Cycle through record modes: normal,
Destructive, Loop, QuickPunch™,
TrackPunch, DestructivePunch
Loop Record toggleOption+LAlt+L
TrackPunch toggle (Pro Tools Ultimate only)Command+Shift+TCtrl+Shift+T
QuickPunch toggleCommand+Shift+PCtrl+Shift+P
Enter/Exit record during playback in
QuickPunch
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts8
Spacebar*
Record Enable button
Control-click on Transport
Record Enable button
Command+Spacebar, F12,
or click Transport Record
button*
Ctrl+Alt+Spacebar
Ctrl-click on track Record
Enable button
Start-click on Transport
Record Enable button
Ctrl+Spacebar, F12, or click
Transport Record Enable
button
ActionMacWindows
DestructivePunch or TrackPunch
enable/disable an audio track
(Pro ToolsUltimate and Pro Tools with Complete Production Toolkit only)
DestructivePunch or TrackPunch enable/disable all audio tracks (Pro Tools Ultimate and
Pro Tools with Complete Production Toolkit
only)
DestructivePunch or TrackPunch
enable/disable all selected audio tracks
(Pro ToolsUltimate only)
Simultaneously DestructivePunch or
TrackPunch enable/disable and record
enable/disable all audio tracks
(Pro ToolsUltimate only)
Simultaneously DestructivePunch or
TrackPunch enable/disable and record
enable/disable all selected audio tracks
(Pro ToolsUltimate only)
Temporarily force all VCA slave tracks to
toggle their record enable status
(Pro ToolsUltimate only)
Temporarily force all VCA slave tracks to toggle their Track Input status
(Pro ToolsUltimate only)
Control-click the track’s
Record Enable button
Option-Control-click a track’s
Record Enable button
Control-Option-Shift-click a
track’s Record Enable button
Option-click a track’s Record
Enable button
Option-Shift-click a track’s
Record Enable button
Option-click the VCA Record
Enable button
Option-click the VCA TrackInput button
Start-click the track’s Record
Enable button
Alt-Start-click a track’s
Record Enable button
Start-Alt-Shift-click a track’s
Record Enable button
Alt-click a track’s Record
Enable button
Alt-Shift-click a track’s
Record Enable button
Alt-click the VCA Record
Enable button
Alt-click the VCA TrackInput
button
Enable or disable pre/post-roll timeCommand+KCtrl+K
Set and enable pre/post-roll timeOption-click with Selector
before or after selection
Disable and set to zero pre/post-roll timeOption-click within selection
closer to front or back
Alt-click with Selector tool
before or after selection
Alt-click within selection
closer to front or back
*Some Pro Tools recording shortcuts use the same key commands as some Mac OS X shortcuts. If you
want to retain use of these key commands in Pr o Tools, these Mac OS X shortcuts must be disabled or remapped.
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts9
Transport Mode (Numeric Keypad)
The following shortcuts apply when you select Numeric Keypad: Transport in the Operations
Preferences page.
ActionMacWindows
Play/Stop00
Rewind11
Fast Forward22
Record Enable33
Loop Playback mode on/off44
Loop Record mode on/off55
QuickPunch mode on/off66
Click on/off77
Countoff on/off88
MIDI Merge/Replace mode on/off99
Shuttle Mode (Numeric Keypad)
(Pro Tools Ultimate Only)
The following shortcuts apply when you select Shuttle mode in the Operations Preferences page.
ActionMacWindows
1 x Forward playback speed66
1 x Rewind playback speed44
4 x Forward playback speed99
4 x Rewind playback speed77
1/4 x Forward playback speed33
1/4 x Rewind playback speed11
1/2 x Forward playback speed5+65+6
1/2 x Rewind playback speed5+45+4
2 x Forward playback speed8+98+9
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts10
ActionMacWindows
2 x Backward playback speed8+78+7
1/16 x Forward playback speed2+32+3
1/16 x Backward playback speed2+12+1
Loop playback of Edit Selection00
Recall Memory LocationPeriod (.)+Memory
Location+Period (.)
Period (.)+Memory
Location+Period (.)
Scrub (Jog)/Shuttle
ActionMacWindows
Temporary Scrub mode when using SelectorControl-click and drag Start-click and drag
Extend selection while scrubbingShift-click and drag with the
Scrubber tool, (also in
temporary Scrub mode)
ShuttleOption-click-drag with
Shuttle Lock (Classic or Transport mode)Control+number key 1–9
Change direction during Shuttle Lock
(Classic or Transport mode)
Shuttle Lock stop (Classic or Transport mode)0 (press number key to
Scrubber tool, (also in
temporary Scrub mode)
(1=minimum, 5=real-time,
9=maximum)
Plus/Minus (+/–) keys
For example, Control+
number+Minus (–) key
resume shuttle)
Shift-click and drag with the
Scrubber, (also in temporary
Scrub mode)
Alt-click-drag with Scrubber,
(also in temporary Scrub
mode)
Plus/Minus (+/–) keys
For example, Start+
number+Minus (–) key
0 (press number key to
resume shuttle)
Exit Shuttle Lock mode (Classic or Transport
mode)
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts11
Spacebar or Escape (Esc)
key
Spacebar or Escape (Esc)
key
Auditioning (Transport = Pro To ols)
The following shortcuts are active only when Transport = Pro Tools.
ActionMacWindows
Play by pre-roll value up to selection start/end
(or current location if no selection)
Play by post-roll value from selection
start/end (or current cursor location if no
selection)
Play by pre- and post-roll value through
selection start/end
Option+
Left/Right Arrow keys
Command+
Left/Right Arrow keys
Command+Option+
Left/Right Arrow keys
Alt+
Left/Right Arrow keys
Ctrl+
Left/Right Arrow keys
Ctrl+Alt+
Left/Right Arrow keys
Auditioning (Transport = MMC)
The following shortcuts are active only when Transport = MMC.
ActionMacWindows
Cue Transport to selection start/endCommand+
Cue Transport with pre/post-roll to selection
start/end
Left/Right Arrow keys
Option+
Left/Right Arrow keys
Ctrl+Left/Right Arrow keys
Alt+Left/Right Arrow keys
Edit Modes and Edit Tools
ActionMacWindows
Shuffle modeF1, or Option+1
Slip modeF2, or Option+2
Spot modeF3, or Option+3
Grid modeF4, or Option+4
Enable Snap To Grid while in another Edit
mode
Enable Snap to Grid and Shuffle modeF1+F4F1+F4
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts12
(on computer keyboard)
(on computer keyboard)
(on computer keyboard)
(on computer keyboard)
Shfit+F4Shfit+F4
F1, or Alt+1
(on computer keyboard)
F2, or Alt+2
(on computer keyboard)
F3, or Alt+3
(on computer keyboard)
F4,or Alt+4
(on computer keyboard)
ActionMacWindows
Enable Snap to Grid and Slip modeF2+F4F2+F4
Enable Snap to Grid and Spot modeF3+F4F3+F4
Zoomer toolF5, or Command+1
(on computer keyboard)
Trimmer toolF6, or Command+2
(on computer keyboard)
Selector toolF7, or Command+3
(on computer keyboard)
Grabber toolF8, or Command+4
(on computer keyboard)
Scrubber toolF9, or Command+5
(on computer keyboard, if
Mac OS X Expose is
disabled)
Pencil toolF10, or Command+6
(on computer keyboard, if
Mac OS X Expose is
disabled)
Smart ToolF6+F7, F7+F8, or
Command+7 (on computer
keyboard)
Cycle through Edit modesSingle Open Quote (‘) key,
located above the Tab key
Cycle through Edit toolsEscape (Esc) keyEscape (Esc) key, or
F5, or Ctrl+1
(on computer keyboard)
F6, or Ctrl+2
(on computer keyboard)
F7, or Ctrl+3
(on computer keyboard)
F8, or Ctrl+4
(on computer keyboard)
F9, or Ctrl+5
(on computer keyboard)
F10, or Ctrl+6
(on computer keyboard)
F6+F7, F7+F8, or Ctrl+7
(on computer keyboard)
Single Open Quote (‘) key,
located above the Tab key
Center-click
Lock out or unlock Shuffle ModeCommand-click the Shuffle
button
Ctrl-click the Shuffle button
Edit Selection, Definition, and Navigation
ActionMacWindows
Enable or disable T ab to T ransients commandCommand+Option+TabCtrl+Alt+Tab
Locate cursor to next transientTab (if Tab to Transient
enabled)
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts13
Tab (if Tab to Transient
enabled)
ActionMacWindows
Locate cursor to previous transientOption+Tab (if Tab to Tran-
sient enabled)
Locate cursor to next Clip-boundary/sync
point
Locate cursor to previous Clip boundary/sync
point
Tab (if Tab to Transients is
disabled)
Option+Tab (if Tab to
Transients is disabled)
Ctrl+Tab (if Tab to Transient
enabled)
Tab (if Tab to Transients is
disabled)
Ctrl+Tab (if Tab to Transients
is disabled)
Go to and select next ClipControl+TabStart+Tab
Go to and select previous ClipControl+Option+TabStart+Ctrl+Tab or Start+Ctrl
Go to Song StartControl+ReturnStart+Enter
Extend selection to Song StartShift+Control+ReturnShift+Start+Enter
Extend selection to next Clip-boundaryShift+TabShift+Tab
Extend selection to previous Clip-boundaryOption+Shift+TabCtrl+Shift+Tab
Extend selection to include next ClipControl+Shift+TabStart+Shift+Tab
Extend selection to include previous ClipControl+Shift+Option+TabStart+Shift+Ctrl+Tab
Return to start of sessionReturnEnter
Go to end of sessionOption+ReturnCtrl+Enter
Extend selection to start of sessionShift+ReturnShift+Enter
Extend selection to end of sessionOption+Shift+ReturnCtrl+Shift+Enter
Link Timeline and Edit selectionShift+Forward Slash (/)Shift+Forward Slash (/)
Set selection start/end during playbackDown/Up Arrow keysDown/Up Arrow keys
Set selection start/end to incoming time code
Down/Up Arrow keysDown/Up Arrow keys
while stopped
Select entire Clip in Edit windowDouble-click with SelectorDouble-click with Selector
tool
Select entire track in Edit windowTriple-click with Selector, or
single-click in track and press
Command+A
Select all Clips in all tracks in Edit windowReturn, then press Com-
Triple-click with Selector tool,
or single-click in track and
press Ctrl+A
Enter, then press Ctrl+A
mand+A
Extend cursor or selection across all tracksEnable “All” Edit group and
Shift-click on any other track
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts14
Enable “All” Edit group and
Shift-click on any other track
ActionMacWindows
Move the selection forward by the selection
amount
Move the selection backward by the selection
amount
Double the length of the Edit selectionCommand+Control+
Halve the length of the selectionCommand+Control+
Cancel Zoom toggle and remain at the same
zoom level
Fit all shown tracks in the Edit windowCommand+Option+Con-
Record enable tracks that contain the
Edit cursor or Edit selection
TrackInput Monitor enable tracks that contain
the Edit cursor or Edit selection
(Pro ToolsUltimate only)
Solo tracks that contain the Edit cursor or
Edit selection
Mute tracks that contain the Edit cursor or
Edit selection
Move the insertion to the beginning of the
Edit selection
Command+Control+
Option+Apostrophe (’)
Command+Control+
Option+L
Option+Shift+ Apostrophe (‘)
Option+Shift+L
Option+Shift+EAlt+Shift+E
trol+Up arrow or Down arrow
Shift+RShift+R
Shift+IShift+I
Shift+SShift+S
Shift+MShift+M
Down arrowDown arrow
Ctrl+Alt+Start+Apostrophe (’)
Ctrl+Alt+Start+L
Ctrl+Alt+Start+Shift+
Apostrophe (’)
Ctrl+Alt+Start+Shift+L
Ctrl+Alt+Start+Up arrow or
Down arrow
Move the insertion to the end of the
Edit selection
Increase or decrease the height of any
lane that contains the Edit cursor or an Edit
selection*
Up arrowUp arrow
Control+Up/Down ArrowStart+Up/Down Arrow
*Some Pro T ools edit selection, definition, and navigation shortcuts use the same key commands as some
Mac OS X shortcuts. If you want to retain use of these key commands in Pro Tools, these Mac OS X shortcuts must be disabled or remapped.
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts15
Editing, Nudging, and Trimming
In the following shortcuts, the Plus/Minus (+/–) key usage is on the numeric keypad only.
ActionMacWindows
Change Grid valueControl+Option+Plus/Minus
Change Nudge valueCommand+Option+
Nudge back by next Nudge value
(Nudge Edit selection and any Clips entirely
inside the Edit selection)
Nudge forward by next Nudge value
(Nudge Edit selection and any Clips entirely
inside the Edit selection)
Nudge start/end data to right/left by Nudge
value (keeps underlying audio and moves
start/end)
Nudge data within current Clip to right/left by
Nudge value (keeps Clip start/end and moves
underlying audio)
Nudge left selection boundary right/left by
Nudge value
Nudge right selection boundary right/left by
Nudge value
Trim left edge of Clip to right/left by Nudge
value
(+/–) keys
Plus/Minus (+/–) keys
Minus (–) key (on numeric
keypad), or Comma (,) (in
Commands Keyboard Focus)
Plus (+) key (on numeric keypad), or Period (.) (in Commands Keyboard Focus)
Trim right edge of Clip to right/left by Nudge
value
Reverse Trimmer tool direction when
trimming Clip
Trim up to, but not over, adjacent ClipsHold down Control key while
Duplicate Clip(s) in Edit WindowOption-click selection and
Delete selection in playlistBackspace or Delete (on
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts16
Command+Plus/Minus (+/–)
keys
Option+Trimmer toolAlt+Trimmer tool
trimming
drag to destination
computer keyboard)
Ctrl+Plus/Minus (+/–) keys
Hold down Start key while
trimming
Alt-click selection and drag to
destination
Backspace or Delete (on
computer keyboard)
ActionMacWindows
Constrain audio Clip to vertical movementControl-click to move audio
Snap Clip start to stationary playhead or Edit
selection start
Snap Clip sync point to stationary playhead or
Edit selection start
Snap Clip end to stationary playhead or Edit
selection end
Clip with Grabber tool
Control-click new Clip with
Grabber tool
Control-Shift-click Clip
containing the sync point with
Grabber tool
Command-Control-click new
Clip with Grabber tool
Start-click to move audio Clip
with Grabber tool
Start-click new Clip with
Grabber tool
Start-Shift-click Clip
containing the sync point with
Grabber tool
Ctrl-Start-click new Clip with
Grabber tool
Clip Gain
ActionMacWindows
Show or hide the Clip Gain LineControl+Shift+Hyphen (-)Start+Shift+Hyphen (-)
Show or hide Clip Gain InfoControl+Shift+Equals (=)Start+Shift+Equals (=)
Add a Clip Gain breakpoint at the current Edit
location
Nudge the selected clip gain upControl+Shift+Up ArrowStart+Shift+Up Arrow
Nudge the selected clip gain downControl+Shift+Down ArrowStart+Shift+Down Arrow
Nudge the selected clip gain backControl+Shift+Minus (–),
Control+Shift+EStart+Shift+E
Control+Shift+M, or
Control+Shift+Comma (,)
Start+Shift+Minus (–),
Start+Shift+M, or
Start+Shift++Comma (,)
Nudge the selected clip gain forwardControl+Shift+Plus (+),
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts17
Start+Shift+Plus (+),
Start+Shift+Period (.), or
Start+Shift+Slash (/)
Track Compositing
The following shortcuts apply to track Playlist lanes in the Edit window.
ActionMacWindows
Solo the Playlist lane containing the Edit
cursor
Move the Edit cursor up and down through
Playlist lanes
Copy the selection to the main PlaylistOption+Control+VAlt+Start+V
Create a new playlist for the first selected
track in the session
Create a new playlist for each track in the
session
Create a new playlist for each selected track
in the session
Duplicate the main playlist for the first
selected track in the session
Duplicate the main playlist for each track in
the session
Duplicate the main playlist for
each selected track in the session
Shift+SShift+S
Control+P and Control+
Semicolon (;)
Control+\Start+\
Control+Option+\Start+Alt+\
Control+Option+Shift+\Start+Alt+Shift+\
Command+Control+\Control+Start+\
Command+Option+Control+\ Control+Alt+Start+\
Command+Option+
Control+Shift+\
Start+P and Start+
Semicolon (;)
Control+Alt+Start+Shift+\
Zoom
ActionMacWindows
Horizontal zoom in or outCommand+ ] or [Ctrl+ ] or [
Zoom to show entire session horizontally
without affecting vertical zoom or scrolling
Zoom in horizontally on a selection without
affecting vertical zoom or scrolling
Vertical zoom to show default waveform
height (Audio)
Incrementally zoom vertically on all audio
tracks
Vertical zoom in or out (MIDI)Command+Shift+ ] or [ Ctrl+Shift+ ] or [
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts18
Command+Control+[Ctrl+Start+[
Command+Control+]Ctrl+Start+]
Command+Option+Control+[Ctrl+Alt+Start+[
Command+Option+ [ or ]Ctrl+Alt+ [ or ]
ActionMacWindows
Vertical zoom to show all notes (lowest to
Command+Control+Shift+[Ctrl+Start+Shift+[
highest) in MIDI and Instrument (MIDI)
Horizontal zoom to show all clips and reset
Option+AAlt+A
amplitude zoom
Horizontal zoom to show all clips but do not
Option+Control+AAlt+Start+A
reset amplitude zoom
Horizontal zoom and scroll timeline excluding
Option+FAlt+F
MIDI events
Horizontal zoom to selection, including MIDI
Option+Control+FAlt+Start+F
events
Continuously zoom vertically on a single
audio track (or group of tracks)
Control+drag with the
Zoomer tool up or down in the
track
Continuously zoom vertically on all audio
tracks
Control+Shift+drag in an
audio track with the Zoomer
tool
Incrementally zoom vertically on all audio
tracks
Command+Option+[ or
Command+Option+]
Fill window with selectionOption-click on Zoomer tool
or Option+F
View entire session and reset waveform
display to the default height
Double-click on Zoomer tool
or Option+A
Start-drag with the Zoomer
tool up or down in the track
Start+Shift-drag in an audio
track with the Zoomer tool
Press Ctrl+Alt+[ or Ctrl+Alt+ ]
Alt-click on Zoomer tool or
Alt+F
Double-click on Zoomer tool
or Alt+A
Set all audio track waveform heights to match
the waveform height of the top-most audio
Command-Shift-click any of
the Zoom buttons
Ctrl-Shift-click any of the
Zoom buttons
track in the Edit window
Zoom vertical and horizontal axisHold down Command key
while dragging the Zoomer
Hold down Ctrl key while
dragging Zoomer tool
tool
Zoom to previous orientationOption-click on any Horizon-
tal Zoom In or Out button, or
Audio or MIDI Zoom In or Out
button
Maximum zoom before waveform drawn from
disk (faster drawing from RAM)
Command-click on Zoomer
tool
Alt-click on any Horizontal
Zoom In or Out button, or
Audio or MIDI Zoom In or Out
button
Ctrl-click on Zoomer tool)
Zoom ToggleControl+EStart+E
Cancel Zoom T oggle and remain at the same
Option+Shift+EAlt+Shift+E
zoom level
Chapter 5: Edit Window and Mix Window Keyboard Shortcuts19
ActionMacWindows
Recall Zoom presets 1–5 Control+Zoom preset num-
ber (1, 2, 3, 4, or 5 on com-
puter keyboard),
or Zoom preset number (1, 2,
3, 4, or 5 on computer
keyboard, in Commands
Keyboard Focus)
Save Zoom presets 1–5Command-click Zoom preset
number in Mix Window
toolbar
Start+Zoom preset number
(1, 2, 3, 4, or 5 on computer
keyboard),
or Zoom preset number (1, 2,
3, 4, or 5 on computer
keyboard in Commands
Keyboard Focus)
Ctrl-click Zoom preset number in Mix Window toolbar
File Menu
ActionMacWindows
New SessionCommand+NCtrl+N
Open SessionCommand+OCtrl+O
Open RecentCommand+Shift+OCtrl+Shift+O
Close sessionCommand+Shift+WCtrl+Shift+W
Save SessionCommand+SCtrl+S
Bounce to DiskCommand+Option+BCtrl+Alt+B
Import Session DataShift+Option+IShift+Alt+I
Import AudioCommand+Shift+ICtrl+Shift+I
Import MIDICommand+Option+lCtrl+Alt+l
Print Score from Pro Tools SessionCommand+PCtrl+P
Bounce Dialog
ActionMacWindows
Add a new Bounce Source rowCommand+Shift+”+” (plus)