003, 96 I/O, 96i I/O, 192 Digital I/O, 192 I/O, 888|24 I/O,
882|20 I/O, 1622 I/O, 24-Bit ADAT Bridge I/O, AudioSuite,
Avid, Avid DNA, Avid Mojo, Avid Unity, Avid Unity ISIS,
Avid Xpress, Axiom, Beat Detective, Bomb Factory, Bruno,
C|24, Command|8, Control|24, D-Command, D-Control, D-Fi,
D-fx, D-Show, D-Verb, DAE, Digi 002, DigiBase, DigiDelivery,
Digidesign, Digidesign Audio Engine, Digidesign Intelligent
Noise Reduction, Digidesign TDM Bus, DigiDrive, DigiRack,
DigiTest, DINR, EditPack, Eleven, EUCON, HD Core, HD
Process, Hybrid, Impact, Interplay, Lo Fi, M -Au d i o,
MachineControl, Maxim, Mbox, MediaComposer, MIDI I/O,
MIX, MultiShell, Nitris, OMF, OMF Interchange, PRE,
ProControl, Pro Tools M-Powered, Pro Tools, Pro Tools|HD,
QuickPunch, Recti-Fi, Reel Tape, Reso, Reverb One,
ReVibe, RTAS, Sibelius, Smack!, SoundReplacer, Sound
Designer II, Strike, Structure, SYNC HD, SYNC I/O,
Synchronic, TL Aggro, TL AutoPan, TL Drum Rehab,
TL Everyphase, TL Fauxlder, TL In Tune, TL MasterMeter,
TL Metro, TL Space, TL Utilities, Transfuser, Trillium Lane
Labs, Vari-Fi, Velvet, X-Form, and XMON are trademarks or
registered trademarks of Avid Technology, Inc. Xpand! is
Registered in the U.S. Patent and Trademark Office. All other
trademarks are the property of their respective owners.
Product features, specifications, system requirements, and
availability are subject to change without notice.
Guide Part Number 9329-65120-00 REV B 11/11
Documentation Feedback
At Avid, we are always looking for ways to improve our
documentation. If you have comments, corrections, or
suggestions regarding our documentation, email us at
techpubs@avid.com.
For increased operational speed and ease of use, there are many Pro Tools® keyboard and Right-click
shortcuts to give you fast access to a wide variety of tasks.
Menu commands that have a keyboard shortcut display their keyboard shortcut on-screen, to the right
of the menu command.
Conventions Used in Documentation
Pro Tools documentation uses the following conventions to indicate menu choices and key commands:
ConventionAction
File > Save SessionChoose Save Session from the File menu.
Command+N/Control+NHold down the Command (Apple) key (Mac)
or the Control (Ctrl) key (Windows) and press the N key.
Option+Plus/Minus (+/–) keysHold down the Option key and press the Plus (+) or Minus (–) key (on numeric
keypad or computer, as noted).
Command-click (Mac Only)Hold down the Command key and click the mouse button.
Right-clickClick with the right mouse button.
Chapter 1: Introduction to Pro Tools Shortcuts 1
Pro Tools Shortcuts Guide2
Chapter 2: Global Keyboard Shortcuts
Global keyboard shortcuts apply to many functions in Pro Tools (such as changing a parameter).
Parameter Change
Pro Tools provides global keyboard shortcuts for changing the following parameters:
•Automation mode
• Monitor mode
• playlist enable
• record, solo and mute enable
• record and solo safes
• inserting plug-ins
ActionsMacWindows
• I/O,bus,send assignment
•volume/peak indicator
• extend Edit or Timeline selection
•track height
•clear clip meter
Change parameter on all channel
strips
Change parameter on all selected
channel strips
Option+applicable function
(applicable functions listed above)
Option+Shift+applicable function
(applicable functions listed directly
above)
Alt+applicable function
(applicable functions listed above)
Alt+Shift+applicable function
(applicable functions listed above)
Chapter 2: Global Keyboard Shortcuts 3
Toggle
Pro Tools provides global keyboard shortcuts for changing the following parameters:
•Tracks in Track List
• Group enables/activation
ActionsMacWindows
• Memory Location parameters
• Automation Enable window
Toggle item and set all others to
same new state
Toggle item and set all others to
opposite state
Option-click on applicable item
(applicable items listed above)
Command-click on applicable item
(applicable items listed directly
above)
Alt-click on applicable item
(applicable items listed above)
Control-click on applicable item
(applicable items listed above)
Fine Adjustment
Pro Tools provides global keyboard shortcuts for the following types of fine adjustment:
• Plug-in parameter editing
• fader movement
ActionsMacWindows
Fine tune an item (Fine Adjust
mode)
Command-click on applicable
fader/pot/breakpoint function
(applicable functions listed above)
• scrubbing
• automation data trimming
Control-click on applicable
fader/pot/breakpoint function
(applicable functions listed above)
Multi-Select
Pro Tools provides global keyboard shortcuts for selecting the following items:
Click to select first item, then
Shift-click another to select all
similar items between (applicable
items listed above)
Click to select first item, then
Command-click to select the next
item (applicable items listed
above)
Click to select first item, then
Shift-click another to select all
similar items between (applicable
items listed above)
Click to select first item, then
Control-click another to select the
next item (applicable items listed
above)
Chapter 3: Edit Window and Mix Window
Keyboard Shortcuts
Pro Tools provides keyboard shortcuts for many Edit window and Mix window operations, as well as
many Transport commands.
Playback
ActionMacWindows
Start/stop playbackSpacebarSpacebar
Half-speed playbackShift+SpacebarShift+Spacebar
Pause (pre-prime deck for instant playback
and record)
Enable/disable online playbackCommand+J, or
Center on selection start/endLeft/Right Arrow keys (when
Play Edit selectionOption+[Alt+[
Back/Forward (move the playback location
backwards/forwards by the Back/Forward
amount) (Pro Tools HD and Pro Tools with
Complete Production Toolkit only)
Back/Forward and Play (move the playback
location backwards/forwards by Back/
Forward amount and then begin playback)
(Pro Tools HD and Pro Tools with Complete
Production Toolkit only)
Extend a selection backwards by the
Back/Forward amount (Pro Tools HD and
Pro Tools with Complete Production Toolkit
only)
Control+Spacebar , or Optionclick, on Transport Play button
Option+Spacebar
selection exceeds window
view)
Command+Transport
Rewind button or Transport
Fast Forward button
Command+Option+Transport Rewind button or Transport Fast Forward button
Shift+Command+Transport
Rewind button or Transport
Fast Forward button
Chapter 3: Edit Window and Mix Window Keyboard Shortcuts 5
Start+Spacebar, or Alt-click
on Transport Play button
Cycle through record modes: normal,
Destructive, Loop, QuickPunch™,
TrackPunch, DestructivePunch
Loop Record toggleOption+LAlt+L
TrackPunch toggle (Pro Tools HD and
Pro Tools with Complete Production Toolkit
only)
QuickPunch toggleCommand+Shift+PCtrl+Shift+P
Pro Tools Shortcuts Guide6
Spacebar*
Record Enable button
Control-click on Transport
Record Enable button
Command+Shift+TCtrl+Shift+T
Ctrl+Alt+Spacebar
Ctrl-click on track Record
Enable button
Start-click on Transport
Record Enable button
ActionMacWindows
Enter/Exit record during playback in
QuickPunch
DestructivePunch or TrackPunch
enable/disable an audio track (Pro Tools HD
and Pro Tools with Complete Production
Toolkit only)
DestructivePunch or TrackPunch
enable/disable all audio tracks (Pro Tools HD
and Pro Tools with Complete Production
Toolkit only)
DestructivePunch or TrackPunch
enable/disable all selected audio tracks
(Pro Tools HD and Pro Tools with Complete
Production Toolkit only)
Simultaneously DestructivePunch or
TrackPunch enable/disable and record
enable/disable all audio tracks (Pro Tools HD
and Pro Tools with Complete Production
Toolkit only)
Simultaneously DestructivePunch or
TrackPunch enable/disable and record
enable/disable all selected audio tracks
(Pro Tools HD and Pro Tools with Complete
Production Toolkit only)
Command+Spacebar, F12,
or click Transport Record
button*
Control-click the track’s
Record Enable button
Option-Control-click a track’s
Record Enable button
Control-Option-Shift-click a
track’s Record Enable button
Option-click a track’s Record
Enable button
Option-Shift-click a track’s
Record Enable button
Ctrl+Spacebar, F12, or click
Transport Record Enable
button
Start-click the track’s Record
Enable button
Alt-Start-click a track’s
Record Enable button
Start-Alt-Shift-click a track’s
Record Enable button
Alt-click a track’s Record
Enable button
Alt-Shift-click a track’s
Record Enable button
Temporarily force all VCA slave tracks to
toggle their record enable status
(Pro Tools HD and Pro Tools with Complete
Production Toolkit only)
Temporarily force all VCA slave tracks to toggle their Track Input status (Pro Tools HD and
Pro Tools with Complete Production Toolkit
only)
Enable or disable pre/post-roll timeCommand+KCtrl+K
Set and enable pre/post-roll timeOption-click with Selector
Disable and set to zero pre/post-roll timeOption-click within selection
Option-click the VCA Record
Enable button
Option-click the VCA TrackInput button
before or after selection
closer to front or back
Alt-click the VCA Record
Enable button
Alt-click the VCA TrackInput
button
Alt-click with Selector tool
before or after selection
Alt-click within selection
closer to front or back
*Some Pro Tools recording shortcuts use the same key commands as some Mac OS X shortcuts. If you
want to retain use of these key commands in Pro Tools, these Mac OS X shortcuts must be disabled.
Chapter 3: Edit Window and Mix Window Keyboard Shortcuts 7
Transport Mode (Numeric Keypad)
The following shortcuts apply when you select Numeric Keypad: Transport in the Operations
Preferences page.
ActionMacWindows
Play/Stop00
Rewind11
Fast Forward22
Record Enable33
Loop Playback mode on/off44
Loop Record mode on/off55
QuickPunch mode on/off66
Click on/off77
Countoff on/off88
MIDI Merge/Replace mode on/off99
Pro Tools Shortcuts Guide8
Shuttle Mode (Numeric Keypad)
(Pro Tools HD and Pro Tools with Complete Production Toolkit Only)
The following shortcuts apply when you select Shuttle mode in the Operations Preferences page.
ActionMacWindows
1 x Forward playback speed66
1 x Rewind playback speed44
4 x Forward playback speed99
4 x Rewind playback speed77
1/4 x Forward playback speed33
1/4 x Rewind playback speed11
1/2 x Forward playback speed5+65+6
1/2 x Rewind playback speed5+45+4
2 x Forward playback speed8+98+9
2 x Backward playback speed8+78+7
1/16 x Forward playback speed2+32+3
1/16 x Backward playback speed2+12+1
Loop playback of Edit Selection00
Recall Memory LocationPeriod (.)+Memory
Location+Period (.)
Chapter 3: Edit Window and Mix Window Keyboard Shortcuts 9
Period (.)+Memory
Location+Period (.)
Scrub (Jog)/Shuttle
ActionMacWindows
Temporary Scrub mode when using SelectorControl-click and drag Start-click and drag
Extend selection while scrubbingShift-click and drag with the
ShuttleOption-click-drag with
Shuttle Lock (Classic or Transport mode)Control+number key 1–9
Change direction during Shuttle Lock
(Classic or Transport mode)
Shuttle Lock stop (Classic or Transport mode)0 (press number key to
Exit Shuttle Lock mode (Classic or Transport
mode)
Scrubber tool, (also in
temporary Scrub mode)
Scrubber tool, (also in
temporary Scrub mode)
(1=minimum, 5=real-time,
9=maximum)
Plus/Minus (+/–) keys
For example, Control+
number+Minus (–) key
resume shuttle)
Spacebar or Escape (Esc)
key
Shift-click and drag with the
Scrubber, (also in temporary
Scrub mode)
Alt-click-drag with Scrubber,
(also in temporary Scrub
mode)
Plus/Minus (+/–) keys
For example, Start+
number+Minus (–) key
0 (press number key to
resume shuttle)
Spacebar or Escape (Esc)
key
Pro Tools Shortcuts Guide10
Auditioning (Transport = Pro Tools)
The following shortcuts are active only when Transport = Pro Tools.
ActionMacWindows
Play by pre-roll value up to selection start/end
(or current location if no selection)
Play by post-roll value from selection
start/end (or current cursor location if no
selection)
Play by pre- and post-roll value through
selection start/end
Option+
Left/Right Arrow keys
Command+
Left/Right Arrow keys
Command+Option+
Left/Right Arrow keys
Auditioning (Transport = MMC)
The following shortcuts are active only when Transport = MMC.
ActionMacWindows
Cue Transport to selection start/endCommand+
Left/Right Arrow keys
Cue Transport with pre/post-roll to selection
start/end
Option+
Left/Right Arrow keys
Ctrl+Left/Right Arrow keys
Alt+Left/Right Arrow keys
Alt+
Left/Right Arrow keys
Ctrl+
Left/Right Arrow keys
Ctrl+Alt+
Left/Right Arrow keys
Chapter 3: Edit Window and Mix Window Keyboard Shortcuts 11
Edit Modes and Edit Tools
ActionMacWindows
Shuffle modeF1, or Alt+1
Slip modeF2, or Alt+2
Spot modeF3, or Alt+3
Grid modeF4, or Alt+4
Enable Snap To Grid while in another Edit
mode
Enable Snap to Grid and Shuffle modeF1+F4F1+F4
Enable Snap to Grid and Slip modeF2+F4F2+F4
Enable Snap to Grid and Spot modeF3+F4F3+F4
Zoomer toolF5, or Command+1
Trimmer toolF6, or Command+2
Selector toolF7, or Command+3
Grabber toolF8, or Command+4
(on computer keyboard)
(on computer keyboard)
(on computer keyboard)
(on computer keyboard)
Shfit+F4Shfit+F4
(on computer keyboard)
(on computer keyboard)
(on computer keyboard)
(on computer keyboard)
F1, or Option+1
(on computer keyboard)
F2, or Option+2
(on computer keyboard)
F3, or Option+3
(on computer keyboard)
F4,or Option+4
(on computer keyboard)
F5, or Ctrl+1
(on computer keyboard)
F6, or Ctrl+2
(on computer keyboard)
F7, or Ctrl+3
(on computer keyboard)
F8, or Ctrl+4
(on computer keyboard)
Scrubber toolF9, or Command+5
(on computer keyboard, if
Mac OS X Expose is
disabled)
Pencil toolF10, or Command+6
(on computer keyboard, if
Mac OS X Expose is
disabled)
Smart ToolF6+F7, F7+F8, or
Command+7 (on computer
keyboard)
Cycle through Edit modesSingle Open Quote (‘) key,
located above the Tab key
Pro Tools Shortcuts Guide12
F9, or Ctrl+5
(on computer keyboard)
F10, or Ctrl+6
(on computer keyboard)
F6+F7, F7+F8, or Ctrl+7
(on computer keyboard)
Single Open Quote (‘) key,
located above the Tab key
ActionMacWindows
Cycle through Edit toolsEscape (Esc) keyEscape (Esc) key, or
Lock out or unlock Shuffle ModeCommand-click the Shuffle
button
Center-click
Ctrl-click the Shuffle button
Edit Selection, Definition, and Navigation
ActionMacWindows
Enable or disable T ab to T ransients commandCommand+Option+TabCtrl+Alt+Tab
Locate cursor to next transientTab (if Tab to Transient
enabled)
Locate cursor to previous transientOption+Tab (if Tab to Tran-
Locate cursor to next Clip-boundary/sync
point
Locate cursor to previous Clip boundary/sync
point
Go to and select next ClipControl+TabStart+Tab
Go to and select previous ClipControl+Option+TabStart+Ctrl+Tab or Start+Ctrl
Go to Song StartControl+ReturnStart+Enter
sient enabled)
Tab (if Tab to Transients is
disabled)
Option+Tab (if Tab to
Transients is disabled)
Tab (if Tab to Transient
enabled)
Ctrl+Tab (if Tab to Transient
enabled)
Tab (if Tab to Transients is
disabled)
Ctrl+Tab (if Tab to T ransients
is disabled)
Extend selection to Song StartShift+Control+ReturnShift+Start+Enter
Extend selection to next Clip-boundaryShift+TabShift+Tab
Extend selection to previous Clip-boundaryOption+Shift+TabCtrl+Shift+Tab
Extend selection to include next ClipControl+Shift+TabStart+Shift+Tab
Extend selection to include previous ClipControl+Shift+Option+TabStart+Shift+Ctrl+Tab
Return to start of sessionReturnEnter
Go to end of sessionOption+ReturnCtrl+Enter
Extend selection to start of sessionShift+ReturnShift+Enter
Extend selection to end of sessionOption+Shift+ReturnCtrl+Shift+Enter
Link Timeline and Edit selectionShift+Forward Slash (/)Shift+Forward Slash (/)
Set selection start/end during playbackDown/Up Arrow keysDown/Up Arrow keys
Chapter 3: Edit Window and Mix Window Keyboard Shortcuts 13
ActionMacWindows
Set selection start/end to incoming time code
Down/Up Arrow keysDown/Up Arrow keys
while stopped
Select entire Clip in Edit windowDouble-click with SelectorDouble-click with Selector
tool
Select entire track in Edit windowTriple-click with Selector, or
single-click in track and press
Command+A
Select all Clips in all tracks in Edit windowReturn, then press Com-
Triple-click with Selector tool,
or single-click in track and
press Ctrl+A
Enter, then press Ctrl+A
mand+A
Extend cursor or selection across all tracksEnable “All” Edit group and
Shift-click on any other track
Move the selection forward by the selection
amount
Move the selection backward by the selection
amount
Command+Control+
Option+Apostrophe (’)
Command+Control+
Option+L
Double the length of the Edit selectionCommand+Control+
Option+Shift+ Apostrophe (‘)
Halve the length of the selectionCommand+Control+
Enable “All” Edit group and
Shift-click on any other track
Ctrl+Alt+Start+Apostrophe (’)
Ctrl+Alt+Start+L
Ctrl+Alt+Start+Shift+
Apostrophe (’)
Ctrl+Alt+Start+Shift+L
Option+Shift+L
Cancel Zoom toggle and remain at the same
Option+Shift+EAlt+Shift+E
zoom level
Fit all shown tracks in the Edit windowCommand+Option+Con-
trol+Up arrow or Down arrow
Ctrl+Alt+Start+Up arrow or
Down arrow
Record enable tracks that contain the
Edit cursor or Edit selection
TrackInput Monitor enable tracks that contain
the Edit cursor or Edit selection (Pro Tools HD
and Pro Tools with Complete Production Toolkit only)
Solo tracks that contain the Edit cursor or
Edit selection
Mute tracks that contain the Edit cursor or
Edit selection
Move the insertion to the beginning of the
Edit selection
Pro Tools Shortcuts Guide14
Shift+RShift+R
Shift+IShift+I
Shift+SShift+S
Shift+MShift+M
Down arrowDown arrow
ActionMacWindows
Move the insertion to the end of the
Edit selection
Increase or decrease the height of any
lane that contains the Edit cursor or an Edit
selection
Up arrowUp arrow
Control+Up/Down ArrowStart+Up/Down Arrow
Editing, Nudging and Trimming
In the following shortcuts, the Plus/Minus (+/–) key usage is on the numeric keypad only.
ActionMacWindows
Change Grid valueControl+Option+Plus/Minus
Change Nudge valueCommand+Option+
Nudge back by next Nudge value
(Nudge Edit selection and any Clips entirely
inside the Edit selection)
Nudge forward by next Nudge value
(Nudge Edit selection and any Clips entirely
inside the Edit selection)
Nudge start/end data to right/left by Nudge
value (keeps underlying audio and moves
start/end)
(+/–) keys
Plus/Minus (+/–) keys
Minus (–) key (on numeric
keypad), or Comma (,) (in
Commands Keyboard Focus)
Plus (+) key (on numeric keypad), or Period (.) (in Commands Keyboard Focus)