Pinnacle Systems Media Distribute - 2.5 User’s Manual

Media | Distribute

User’s Guide

Version 2.5

Legal Notices

Product specifications are subject to change without notice and do not represent a commitment on the part of Avid Technology, Inc.

This product is subject to the terms and conditions of a software license agreement provided with the software. The product may only be used in accordance with the license agreement.

This product may be protected by one or more U.S. and non-U.S patents. Details are available at www.avid.com/patents

This document is protected under copyright law. An authorized licensee of Interplay Central may reproduce this publication for the licensee’s own use in learning how to use the software. This document may not be reproduced or distributed, in whole or in part, for commercial purposes, such as selling copies of this document or providing support or educational services to others. This document is supplied as a guide for Interplay Central. Reasonable care has been taken in preparing the information it contains. However, this document may contain omissions, technical inaccuracies, or typographical errors. Avid Technology, Inc. does not accept responsibility of any kind for customers’ losses due to the use of this document. Product specifications are subject to change without notice.

The following disclaimer is required by Apple Computer, Inc.:

APPLE COMPUTER, INC. MAKES NO WARRANTIES WHATSOEVER, EITHER EXPRESS OR IMPLIED, REGARDING THIS PRODUCT, INCLUDING WARRANTIES WITH RESPECT TO ITS MERCHANTABILITY OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY PROVIDES YOU WITH SPECIFIC LEGAL RIGHTS. THERE MAY BE OTHER RIGHTS THAT YOU MAY HAVE WHICH VARY FROM STATE TO STATE.

The following disclaimer is required by Sam Leffler and Silicon Graphics, Inc. for the use of their TIFF library:

Permission to use, copy, modify, distribute, and sell this software [i.e., the TIFF library] and its documentation for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of the software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics.

THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

The following disclaimer is required by the Independent JPEG Group:

This software is based in part on the work of the Independent JPEG Group.

This Software may contain components licensed under the following conditions:

Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley. The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. This software is provided "as is" without express or implied warranty.

Permission to use, copy, modify, distribute, and sell this software for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Daniel Dardailler not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Daniel Dardailler makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.

Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software.

THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.

This product includes software developed by the University of California, Berkeley and its contributors.

The following disclaimer is required by Paradigm Matrix:

Portions of this software licensed from Paradigm Matrix.

The following disclaimer is required by Ray Sauers Associates, Inc.:

“Install-It” is licensed from Ray Sauers Associates, Inc. End-User is prohibited from taking any action to derive a source code equivalent of “Install-It,” including by reverse assembly or reverse compilation, Ray Sauers Associates, Inc. shall in no event be liable for any damages resulting from reseller’s failure to perform reseller’s obligation; or any damages arising from use or operation of reseller’s products or the software; or any other damages, including but not limited to, incidental, direct, indirect, special or consequential Damages including lost profits, or damages resulting from loss of use or inability to use reseller’s products or the software for any reason including copyright or patent infringement, or lost data, even if Ray Sauers Associates has been advised, knew or should have known of the possibility of such damages.

The following disclaimer is required by Videomedia, Inc.:

“Videomedia, Inc. makes no warranties whatsoever, either express or implied, regarding this product, including warranties with respect to its merchantability or its fitness for any particular purpose.”

“This software contains V-LAN ver. 3.0 Command Protocols which communicate with V-LAN ver. 3.0 products developed by Videomedia, Inc. and V-LAN ver. 3.0 compatible products developed by third parties under license from Videomedia, Inc. Use of this software will allow “frame accurate” editing control of applicable videotape recorder decks, videodisc recorders/players and the like.”

The following disclaimer is required by Altura Software, Inc. for the use of its Mac2Win software and Sample Source Code:

The following disclaimer is required by 3Prong.com Inc.:

Certain waveform and vector monitoring capabilities are provided under a license from 3Prong.com Inc.

The following disclaimer is required by Interplay Entertainment Corp.:

The “Interplay” name is used with the permission of Interplay Entertainment Corp., which bears no responsibility for Avid products.

This product includes portions of the Alloy Look & Feel software from Incors GmbH.

This product includes software developed by the Apache Software Foundation (http://www.apache.org/

This product may include the JCifs library, for which the following notice applies:

Avid Interplay contains components licensed from LavanTech. These components may only be used as part of and in connection with Avid Interplay.

This product includes FFmpeg, which is covered by the GNU Lesser General Public License.

This product includes software that is based in part of the work of the FreeType Team.

This software is based in part on the work of the Independent JPEG Group.

This product includes libjpeg-turbo, which is covered by the wxWindows Library License, Version 3.1.

P41-RR02188 by the National Institutes of Health.

Portions relating to JPEG and to color quantization copyright 2000, 2001, 2002, Doug Becker and copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, Thomas G. Lane. This software is based in part on the work of the Independent JPEG Group. See the file README-JPEG.TXT for more information. Portions relating to WBMP copyright 2000, 2001, 2002 Maurice Szmurlo and Johan Van den Brande.

Permission has been granted to copy, distribute and modify gd in any context without fee, including a commercial application, provided that this notice is present in user-accessible supporting documentation.

This does not affect your ownership of the derived work itself, and the intent is to assure proper credit for the authors of gd, not to interfere with your productive use of gd. If you have questions, ask. "Derived works" includes all programs that utilize the library. Credit must be given in user-accessible documentation.

This software is provided "AS IS." The copyright holders disclaim all warranties, either express or implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose, with respect to this code and accompanying documentation.

Although their code does not appear in gd, the authors wish to thank David Koblas, David Rowley, and Hutchison Avenue Software Corporation for their prior contributions.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)

Media | Distribute enables its users to access certain YouTube functionality, as a result of Avid's licensed use of YouTube's API. The charges levied by Avid for use of Media | Distribute are imposed by Avid, not YouTube. YouTube does not charge users for accessing YouTube site functionality through the YouTube APIs.

Media | Distribute uses the bitly API, but is neither developed nor endorsed by bitly.

Android is a trademark of Google Inc.

Attn. Government User(s). Restricted Rights Legend

U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or “commercial computer software documentation.” In the event that such Software or documentation is acquired by or on behalf of a unit or agency of the U.S. Government, all rights with respect to this Software and documentation are subject to the terms of the License Agreement, pursuant to FAR §12.212(a) and/or DFARS §227.7202-1(a), as applicable.

Trademarks

003, 192 Digital I/O, 192 I/O, 96 I/O, 96i I/O, Adrenaline, AirSpeed, ALEX, Alienbrain, AME, AniMatte, Archive, Archive II, Assistant Station, AudioPages, AudioStation, AutoLoop, AutoSync, Avid, Avid Active, Avid Advanced Response, Avid DNA, Avid DNxcel, Avid DNxHD, Avid DS Assist Station, Avid Ignite, Avid Liquid, Avid Media Engine, Avid Media Processor, Avid MEDIArray, Avid Mojo, Avid Remote Response, Avid Unity, Avid Unity ISIS, Avid VideoRAID, AvidRAID, AvidShare, AVIDstripe, AVX, Beat Detective, Beauty Without The Bandwidth, Beyond Reality, BF Essentials, Bomb Factory, Bruno, C|24, CaptureManager, ChromaCurve,

ChromaWheel, Cineractive Engine, Cineractive Player, Cineractive Viewer, Color Conductor, Command|24, Command|8, Control|24, Cosmonaut Voice, CountDown, d2, d3, DAE, D-Command, D-Control, Deko, DekoCast, D-Fi, D-fx, Digi 002, Digi 003, DigiBase, Digidesign, Digidesign Audio Engine, Digidesign Development Partners, Digidesign Intelligent Noise Reduction, Digidesign TDM Bus, DigiLink, DigiMeter, DigiPanner, DigiProNet, DigiRack, DigiSerial, DigiSnake, DigiSystem, Digital Choreography, Digital Nonlinear Accelerator, DigiTest, DigiTranslator, DigiWear, DINR, DNxchange, Do More, DPP-1, D-Show, DSP Manager, DS-StorageCalc, DV Toolkit, DVD Complete, D-Verb, Eleven, EM, Euphonix, EUCON, EveryPhase, Expander, ExpertRender, Fader Pack, Fairchild, FastBreak, Fast Track, Film Cutter, FilmScribe, Flexevent, FluidMotion, Frame Chase, FXDeko, HD Core, HD Process, HDpack, Home-to-Hollywood, HYBRID, HyperSPACE, HyperSPACE HDCAM, iKnowledge, Image Independence, Impact, Improv, iNEWS, iNEWS Assign, iNEWS ControlAir, InGame, Instantwrite, Instinct, Intelligent Content Management, Intelligent Digital Actor Technology, IntelliRender, Intelli-Sat, Intelli-sat Broadcasting Recording Manager, InterFX, Interplay, inTONE, Intraframe, iS Expander, iS9, iS18, iS23, iS36, ISIS, IsoSync, LaunchPad, LeaderPlus, LFX, Lightning, Link & Sync, ListSync, LKT-200, Lo-Fi, MachineControl, Magic Mask, Make Anything Hollywood, make manage move | media, Marquee, MassivePack, Massive Pack Pro, Maxim, Mbox, Media Composer, MediaFlow, MediaLog, MediaMix, Media Reader, Media Recorder, MEDIArray, MediaServer, MediaShare, MetaFuze, MetaSync, MIDI I/O, Mix Rack, Moviestar, MultiShell, NaturalMatch, NewsCutter, NewsView, NewsVision, Nitris, NL3D, NLP, NSDOS, NSWIN, OMF, OMF Interchange, OMM, OnDVD, Open Media Framework, Open Media Management, Painterly Effects, Palladium, Personal Q, PET, Podcast Factory, PowerSwap, PRE, ProControl, ProEncode, Profiler, Pro Tools, Pro Tools|HD, Pro Tools LE, Pro Tools M-Powered, Pro Transfer, QuickPunch, QuietDrive, Realtime Motion Synthesis, Recti-Fi, Reel Tape Delay, Reel Tape Flanger, Reel Tape Saturation, Reprise, Res Rocket Surfer, Reso, RetroLoop, Reverb One, ReVibe, Revolution, rS9, rS18, RTAS, Salesview, Sci-Fi, Scorch, ScriptSync, SecureProductionEnvironment, Serv|GT, Serv|LT, Shape-to-Shape, ShuttleCase, Sibelius, SimulPlay, SimulRecord, Slightly Rude Compressor, Smack!, Soft SampleCell, Soft-Clip Limiter, SoundReplacer, SPACE, SPACEShift, SpectraGraph, SpectraMatte, SteadyGlide, Streamfactory, Streamgenie, StreamRAID, SubCap, Sundance, Sundance Digital, SurroundScope, Symphony, SYNC HD, SYNC I/O, Synchronic, SynchroScope, Syntax, TDM FlexCable, TechFlix, Tel-Ray, Thunder, TimeLiner, Titansync, Titan, TL Aggro, TL AutoPan, TL Drum Rehab, TL Everyphase, TL Fauxlder, TL In Tune, TL MasterMeter, TL Metro, TL Space, TL Utilities, tools for storytellers, Transit, TransJammer, Trillium Lane Labs, TruTouch, UnityRAID, Vari-Fi, Video the Web Way, VideoRAID, VideoSPACE, VTEM, Work-N-Play, Xdeck, X-Form, Xmon and XPAND! are either registered trademarks or trademarks of Avid Technology, Inc. in the United States and/or other countries.

Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Apple and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks contained herein are the property of their respective owners.

Footage

Hell’s Kitchen - Courtesy of Upper Ground Enterprises/Hell's Kitchen post team.

Media | Distribute User’s Guide • Created 12/17/15 • This document is distributed by Avid in online (electronic) form only, and is not available for purchase in printed form.

Using This Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 1 Media | Distribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using the Media Distribute Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Publish to Social Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Publish to the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Review and Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Chapter 2 Workflows for Media | Distribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Media Flow from Ingest to Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Media | Distribute Roles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Using This Guide

This guide is intended for users of an Avid MediaCentral | UX system with the Media | Distribute feature. This guide describes product features and basic user procedures, such as Media Distribute multi-platform publishing.

1 Media | Distribute

Media Distribute allows users to publish news stories and audio and video content directly from the MediaCentral | UX interface to multiple outlets:

• Corporate and broadcast Web sites and Web content management systems

• Social media services such as Facebook and Twitter

• Online video platforms such as YouTube and Brightcove

Before you can use Media Distribute to publish to these services and platforms, you need to configure profiles in MediaCentral UX for specific targets, such as personal or corporate Twitter or YouTube accounts. You then create a multimedia package — a collection of text (messages or stories), images, video, and audio, all associated with a common iNEWS story and Interplay Production sequence. And you can distribute the package to multiple targets in a single process using the Media Distribute layout in MediaCentral.

Media Distribute also requires a separate license and installation. For more information on installing Media Distribute, see your Avid Professional Services representative.

As part of MediaCentral, Media Distribute includes many of the processes described in the Avid

MediaCentral | UX User’s Guide and Avid MediaCentral | UX Administration Guide. For more information, see your MediaCentral documentation.

See the following topics for more information about Media Distribute:

Using the Media Distribute Layout

•

• Publish to Social Media

• Publish to the Web

• Review and Approval

Using the Media Distribute Layout

12 3

When you have created your system and user profiles, you can create and publish your packages using the Media Distribute layout in MediaCentral UX. The Media Distribute layout displays different options when you select Social Message, Web Story, or Packages in the Platform pane.

The following illustration shows the Media Distribute layout with Social Message selected in the Platform pane. For information on the Web Story and the Packages panes, see

Web” on page 18

You can customize MediaCentral UX by adjusting a layout’s areas and panes. A single area can

contain one or more panes. When an area contains more than one pane, the panes are displayed in a tabular format, with one pane on top of the others.

and “Review and Approval” on page 32.

Using the Media Distribute Layout

“Publish to the

Pane or Area Description

1 Launch A pane from which you navigate to various locations. This pane displays remote

file systems, local file systems, and other locations for assets.

Pane or Area Description

Using the Media Distribute Layout

2 Media Distribute

Creation area

3 Media A pane in which you can view and edit media assets. The controls that are

4 Assets A pane that displays assets. These assets can result from a search or from

5 Queue/Story

(iNEWS users only)

An area in which you can select a platform for your package or review and confirm specific packages for the available targets.The options that display in the area change when you select one of the following panes:

• Social Message — You use this pane to create packages for publication to social media sites. You can also schedule packages for delivery at a specific time.

• Web Story — You use this pane to create packages for publication to Web Content Management Systems (CMS). The options available in this pane depend on which Web CMS settings your MediaCentral administrator has configured.

• Packages — You use this pane to review and approve packages submitted for publication. The pane also displays a history of packages ready for publication and already published, which allows you to search all submitted and published packages.

displayed depend on the selected asset.

browsing. Assets are displayed in a folder hierarchy, if applicable to the assets displayed.

A pane that displays the contents of a queue with the contents of a selected story in the queue, including the story form and any production cues. It can only be opened from the Assets pane, and is therefore not listed as part of the Panes menu.

To open the Media Distribute layout, do the following:

t Click the Layout selector and select Media Distribute.

To open a new pane:

1. Select the Panes menu.

2. Select the menu option corresponding to the pane you want to open.

The pane you select opens in the active area.

Publish to Social Media

Media Distribute allows you to create your package, including text and media, and then to manage the flow of assets and metadata through the transcode process and the delivery of the package to online, mobile, and social media platforms. The integration of these processes with the MediaCentral UX interface makes publishing your content to multiple outlets simple and efficient.

The workflow for publishing your package to a social media service such as Facebook depends on whether or not you want to start with an iNEWS story as your source. Working from an existing story, you can use the Social Message pane to select a profile, modify the content appropriately for a particular target, edit and add video, and then publish to one or more service.

If your MediaCentral configuration does not include iNEWS, the iNEWS options included in

Media Distribute are disabled.

If you start with media located in Interplay Production, you can use the Social Message pane to select your profile, create a message to accompany your material, edit and add media content, and then deliver your message, images, and video to multiple channels in the right format for each platform.

Publish to Social Media

You do not need iNEWS or Interplay Production to publish messages to social media services

using Media Distribute.

You can also schedule the publication of your multimedia package or rundown stories to a social media service.

Publishing from iNEWS to Social Media

You use the Media Distribute layout to create your package and deliver it to one or more social media targets. When you publish from iNEWS, you select your story, and then you can add video or an image, and then either publish your media package or schedule publication for a specific time (see

You can publish images to Facebook and Twitter from the Social Media pane.

To prepare an iNEWS story for publishing to a social media or video service:

1. Click the Layout selector and select Media Distribute.

The Media Distribute layout opens.

2. Do the following to open a story in the Queue/Story pane.

a. Double-click an iNEWS server in the Launch pane.

The folder hierarchy of the iNEWS database displays in the Assets pane.

“Scheduling the Delivery of Content for Publication” on page 17).

Publish to Social Media

b. Double-click a queue in the Asset pane.

The queue’s contents open in the Queue/Story pane.

c. Select the story in the queue you want to view and click the Story button to display the

story in the bottom half of the Queue/Story pane.

3. Do one of the following:

t Click the Pane menu in the Queue/Story pane and select Send to Media Distribute.

t Click the Social Message pane, and then click Load iNEWS Story.

The Message text box in the Social Messages pane displays the iNEWS story, including all segments, with all production cues removed and the character count listed below the text box. If you selected the option to transform iNEWS stories to lowercase in the System Settings, all text changes to lowercase characters.

Social Message pane: iNEWS story loaded in the Message box; target buttons; Profiles and Video Profiles menus; selected profile; Attach/Remove Video button; Attach/Remove Closed Captioning button; Load Image buttons; Scheduler, Load iNEWS Story button

Publish to Social Media

4. (Optional) Add, delete, or modify story text in the Message text box.

Changes you make in the Message text box apply globally to all social media targets you select. You can also modify the story text for individual targets in the text boxes for those targets.

5. Select a social media target — for example, Facebook. You can select multiple targets.

Settings display in the Social Message tab for each target you select. The text in the Message text box automatically displays in the message box for each target.

If the story text exceeds the maximum length for a social media target, the story appears truncated in the message box.

6. Click the Profiles menu, and select a profile. You can select multiple profiles for each target.

Profiles display in the Selected Profiles area.

System profile

System profile with video transcoding

User profile

If you want to delete a profile, click the “x” next to the profile name.

Some profiles used for publishing video in the Social Messages pane include a transcoding

component. This allows you to publish video directly to some platform that are not classified as online video providers — for example, Facebook.

7. (Optional) In the target message box, edit the text for the applicable platform. For example, you can edit your story to fit Twitter’s 140-character limit.

When you embed video in a message, the text of the Web link, the Uniform Resource Locater

(URL), is included in any character limit for the selected platform.

8. To add a video to your package, do the following:

a. Double-click a sequence in the Asset pane or drag the video asset to the Media viewer.

The video asset displays in the Media pane.

b. If you do not want to add the entire video to your package, set In and Out points in the

Media pane and create a subclip and then load the subclip in the Media viewer.

For information on creating sequences, see “Creating a Sequence” in the Avid

MediaCentral UX User’s Guide.

Publish to Social Media

c. Click the Video Profiles menu, and select a profile. You can select multiple profiles for

each target.

When you publish a package that includes video to a social media platform, the published content includes a link to the video on the Web site specified in the Video Profile menu.

d. If necessary, add or update any metadata to the profile fields that require information.

e. Click Attach Video.

The video displays in the Video area of the Social Media pane and a sequence is automatically created. The Attach Video button changes to the Remove Video button.

f. If your video includes closed captioning information, click the Attach Closed

Captioning button.

Closed captioning information is added to the media package, and the Attach Closed Captioning button changes to the Remove Closed Captioning button. You can remove closed captioning from your package by clicking Remove Closed Captioning.

9. To add an image to your package, do one of the following:

t Move the position indicator in the Media viewer to the appropriate frame in your video

clip, and then click Load from Player.

t Click Load from local drive, navigate to the image stored on your system that you want

to use, and click Open.

The image displays in the Image area of the Social Media pane.

You can publish images to Facebook and Twitter from the Social Media pane.

10. Use the Scheduler area if you want to schedule publication of your package for a specific date and time. For more information on scheduling rundowns, see

of Content for Publication” on page 17

11. Click Post.

The story is sent for approval and the Social Media pane clears all fields. For information on approving stories for publishing, see

If your package does not include video and your target uses a user profile — for example, if you publish the package to your personal Twitter account — the package does not require review or approval and is posted automatically to your account.

“Review and Approval” on page 32.

“Scheduling the Delivery

Publishing from Interplay | Production to Social Media

In addition to creating a media package from an iNEWS story, you can also start directly with media stored in your MediaCentral environment and then add the text and tags you want for your story.

If your MediaCentral configuration does not include iNEWS, the iNEWS options included in

Media Distribute are disabled.

To prepare a video or image from Interplay Production for publishing to a social media service:

1. Click the Layout selector and select Media Distribute.

The Media Distribute layout opens.

2. Do the following to load an asset in the Media pane.

a. Double-click an Interplay Production server in the Launch pane.

The folder hierarchy of the MediaCentral database displays in the Assets pane.

b. Navigate to a sequence in the Asset pane, and then double-click the asset or drag it to

the Media viewer.

For information on opening media in the Asset pane, see “Navigating the Interplay | Production Database” in the Avid MediaCentral | UX User’s Guide.

Publish to Social Media

The asset opens in the Media pane.

c. If you do not want to add the entire video to your package, set In and Out points in the

Media pane and create a subclip and then load the subclip in the Media viewer.

+ 34 hidden pages

Pinnacle Systems Media Distribute - 2.5 User’s Manual

Contents

Using This Guide

1 Media | Distribute

Using the Media Distribute Layout

Publish to Social Media

Publishing from iNEWS to Social Media

Publishing from Interplay | Production to Social Media