Pinetron PDR-M1104, PDR-M1008, PDR-M1016 User Manual

DIGITAL VIDEO RECORDER USER GUIDE

4/8/16ch

VER M2.2

 Thank you for purchasing this Digital Video Recorder.  Before using the Digital Video Recorder, please ensure that you read and

understand the User Guide.

 Please store the User Guide at an easily accessible location.

 Before connecting and installing any third party cameras, monitors, alarms and computers,

please refer to the appropriate instruction manual for proper operation.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

2 DIGITAL VIDEO RECORDER

SAFETY PRECAUTIONS

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of un insulated

“dangerous voltage” within the product‟s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

3 DIGITAL VIDEO RECORDER

Contents

■ Safety Precautions ……………………………………………………………………………………… 3

■ Contents ………………………………………………………………………………………………… 4

■ Disclaimer ……………………………………………………………………………………………… 6

■ Warning ………………………………………………………………………………………………… 6

■ Caution ………………………………………………………………………………………………… 8

■ Preventing Malfunction………………………………………………………………………………… 8

■ Package Contents……………………………………………………………………………………… 9

■ Controls

Front Panel ……………………………………………………………………………………… 10

Buttons …………………………………………………………………………………………… 10

Rear Panel Connectors ………………………………………………………………………… 12

Remote Controller ……………………………………………………………………………… 14

■ Installation & Connections ……………………………………………………………………………… 15

Camera, Monitor, Microphone, Alarm sensor and Power cord

Alarm inputs and Alarm outs

Pan/Tilt/Zoom Connections

PC system requirement for NETWORK Connection

■ Quick start page ………………………………………………………………………………………….. 16

■ Live Viewing

Display Overview ………………………………………………………………………………… 18

■ Operation

Main Menu Overview ……………………………………………………………………………… 20

Display Option ………………………………………………………………………………… 21

Camera Setup …………………………………………………………………………………… 23

Motion Recording ………………………………………………………………………………… 25

Basic Recording ………………………………………………………………………………… 27

Alarm Recording ………………………………………………………………………………… 29

Schedule Recording ……………………………………………………………………………… 33

Network Setup ……………………………………………………………………………… 36

System Setup ……………………………………………………………………………… 39

■ Pan/Tilt Zoom Control …………………………………………………………………………… 45

■ Search/Playback …………………………………………………………………………… 50

Time Search ………………………………………………………………………………… 50

Log List Search ……………………………………………………………………………… 52

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

4 DIGITAL VIDEO RECORDER

■ External Search …………………………………………………………………………… 53

■ Back up …………………………………………………………………………… 54

Built-in CD RW ……………………………………………………………………………… 54

External USB HDD …………………………………………………………………………… 56

USB Flash Memory ……………………………………………………………………………… 57

■ Client Program …………………………………………………………………………… 61

Installation ………………………………………………………………………………… 62

Features ……………………………………………………………………………… 65

DVR Control ……………………………………………………………………………… 76

Virtual DVR …………………………………………………………………………….… 99

■ Specification ………..………………………………………………………………………….. 118

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

5 DIGITAL VIDEO RECORDER

Disclaimer

 The information in this manual is believed to be accurate and reliable as of the date of

publication. The information contained herein is subject to change without notice. Revisions

or New editions to this publication may be issued to incorporate such change

 We makes no warranties for damages resulting from corrupted or lost data due to a mistaken

operation or malfunction of the Digital Video Recorder, the software, the hard drives, personal

computers, peripheral devices, or unapproved/unsupported devices.

Warning

 Do not cover the ventilation opening or slots on the outer casing. To prevent the appliance

from overheating, provide at least two inches of air space around the vent and the slots.

 Do not drop metallic parts through slots. This could permanently damage the Digital Video

Recorder. Immediately turn the DVR‟s power off or unplug the power cord from the power

outlet. Contact a qualified service personnel authorized by your equipment distributor

 Do not attempt to disassemble or alter any part of the equipment that is not expressly

described in this guide. Disassembly or alteration may result in high voltage electrical shock.

Qualified service personnel authorized by your equipment distributor should conduct internal

inspections, alterations and repairs.

 Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do

so may result in fire or electrical shock. Immediately turn the DVR‟s power off, remove the

power cable from the power outlet. Confirm that smoke and fume emissions have ceased.

Please consult your DVR distributor.

 Stop operating the equipment if a heavy object is dropped or the casing is damaged. Do not

strike or shake. Failure to do so may result in fire or electrical shock. Immediately turn the

DVR‟s power off or unplug the power cord from the power outlet. Please consult your DVR

distributor.

 Do not allow the equipment come into contact with, or become immersed in, water or other

liquids. Do not allow liquids to enter the interior. The DVR has not been waterproofed. If

the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth.

In the event that the water or other foreign substances enter the interior, immediately turn the

DVR‟s Power off or unplug the power cord from the power outlet. Continued use of the

equipment may result in fire or electrical shock. Please consult your DVR distributor.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

6 DIGITAL VIDEO RECORDER

 Do not use substances containing alcohol, benzene, thinners or other flammable substances

to clean or maintain the equipment. The use of these substances may lead to fire. Use a

dry cloth on a regular periodic basis and wipe away the dust and dirt that collects on the

device. In dusty, humid or greasy environments, the dust that collects around the ventilation

or the slots on the outer casing over long periods of time may become saturated with

humidity and short-circuit, leading to fire.

 Do not cut, damage, alter or place heavy items on the power cord. Any of these actions

may cause an electrical short circuit, which may lead to fire or electrical shock.

 Do not handle the device or power cord if your hands are wet. Handling it with wet hands

may lead to electrical shock. When unplugging the cord, ensure that you hold the solid

portion of the plug. Pulling on the flexible portion of the cord may damage or expose the

wire and insulation, creating the potential for fires or electrical shocks.

 Use only the recommended power accessories. Use of power sources not expressly

recommended for this equipment may lead to overheating, distortion of the equipment, fire,

electrical shock or other hazards.

 Do not place the batteries near a heat source or expose them to direct flame or heat.

Neither should you immerse them in water. Such exposure may damage the batteries and

lead to the leakage of corrosive liquids, fire, electrical shock, explosion or serious injury.

 Do not attempt to disassemble, alter or apply heat to the batteries. There is serious risk of

injury due to an explosion. Immediately flush with water any area of the body, including the

eyes and mouth, or clothing that comes into contact with the inner contents of the battery. If

the eyes or mouth contact these substances, immediately flush with water and seek medical

assistance from a medical professional.

 Avoid dropping or subjecting the batteries to severe impacts that could damage the casings.

It could lead to leakage and injury.

 Do not short-circuit the battery terminals with metallic objects, such as key holders. It could

lead to overheating, burns and other injuries.

 The supplied power supply and power cord are designed for exclusive use with the Digital

Video Recorder. Do not use it with other products or batteries. There is a risk of fire and

other hazards.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

7 DIGITAL VIDEO RECORDER

Caution

 Do not operate the appliance beyond its specified temperature, humidity or power source

ratings. Do not use the appliance in an extreme environment where there is high

temperature or high humidity. Use the device at temperatures within +0°C - +40°C (32°F -

104°F) and humidity below 90 %. The normal operating power source for this device is

100V-240V AC 50/60Hz.

Preventing Malfunction

 Avoid Strong Magnetic Fields. Never place the DVR in close Proximity to electric motors or

other equipment generating strong electromagnetic fields. Exposures to strong magnetic

fields may cause malfunctions or corrupt image data.

 Avoid Condensation Related Problems. Moving the equipment rapidly between hot and cold

temperatures may cause condensation (water droplets) to form on its external and internal

surfaces. You can avoid this by placing the equipment in an airtight, resalable plastic bag and

letting it adjust to temperature changes slowly before removing it from the bag.

 If Condensation forms inside the Digital Video Recorder. Stop using the equipment

immediately if you detect condensation. Continued use may damage the equipment. Remove

the power cord from the power outlet and wait until the moisture evaporates completely

before resuming use.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

8 DIGITAL VIDEO RECORDER

PACKAGE CONTENTS

Please check the package and contents for visible damage. If any components are damaged or

missing, do not attempt to use the unit, contact the supplier immediately. If the unit must be

returned, it must be shipped in the original packing box.

CONTENTS

QUANTITY

REMARK

DIGITAL VIDEO RECORDER

1 UNIT

CLIENT SOFTWARE CD

REMOTE CONTROLLER

Audio In Cable Connector

1(except for 4ch)

BATTERY (AAAsize)

POWER CORD

USER GUIDE

LOOP BACK CABLE

16CH ONLY

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

9 DIGITAL VIDEO RECORDER

CONTROLS

Front Panel

Power Button

Numeric Buttons Mode Indicator

Playback/Record Control

Backup Button

Remote Control

Signal Receiver

Function Buttons

Lock Button

Menu Button

Built in CDRW or DVD RW

POWER

4 5 6 7 8 0/109 11 12 13 14 15 16

USB1

REC STOP PLAY BACKUP

LOCK

SCHEDULE DISPLAY

ENTER CANCEL

LOG

PAN/TILT

TIME SEARCH

POWER REC SCHEDULE LOCK NETWORK

ALARM SEARCH

Buttons

POWER button

 Press this button to turn the power on; press again to turn the power off.

The POWER LED (red) lights/goes off when the power is on/off.

Numeric Buttons

(1~16)

 These buttons have a number of functions to enter data and to make

selections. They are used to enter numerical data when prompted for the

password, to make channel/camera selection, to choose the day in

schedule option, and to enter alphabets to label each channel.

Mode Indicator

 Five LEDs display the status of the Digital Video Recorder. From the left,

Power (red), Recording (red), Scheduled Recording (green), Lock (green)

and Network (green).

Playback / Record

Control

 Used to Start and Stop Recording or Playback.

To rewind, first press PLAY button and then press REWIND (<<) button.

(Reverse playback in X1 speed is not available.)

Remote control

signal receiver.

 Do not block the receiver as the remote controller needs the line of sight to

the receiver.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

10 DIGITAL VIDEO RECORDER

Screen Control

Buttons

 [DISPLAY] : Press this button to display the cameras in multi-screen mode

or to switch sequence function.

 [P/T/Z/FOCUS]: Press this button to control a PAN/TILT/ZOOM camera

via RS-485 connection.

Function Buttons

 [SCHEDULE]: Press this button to make scheduled recording standby.

The SCHEDULE LED (green) lights/goes off when the schedule is on/off.

 [TIME SEARCH]: Press this button to display the Time Search menu.

* This button is used for [-] : To Decrease settings

 [Alarm Search/ EXT. SEARCH] : Press this button to start external HDD

search..

* This button is used for [+] : To Increase settings

 [REC] : Press this button to start recording.

MENU Button

 [ENTER]: Press this button to save menu settings

 [CANCEL]: Press this button to exit menu without saving.

 [Direction ]: In Menu setup mode, used to move the cursor.

In Zoom mode, used to move the zoom area.

 [MENU]: Press this button to display the MAIN MENU screen.

Backup Button

 [BACKUP]: Press this button to begin making a backup copy of the hard

drive. If there is no peripheral recording device connected, this button cannot

be used.

 [ALARM.EXT. SEARCH]: Press this button to start external HDD search.

LOCK Button

 Press this button to lock all units‟ key buttons including the remote

controller. The LOCK LED (green) lights/goes off when the lock is on/off. To

release press it again and enter the administer password.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

11 DIGITAL VIDEO RECORDER

Rear Panel Connectors

1) 4 Channel

1) Camera Inputs: BNC input connectors,

2) Composite Monitor Output: BNC standard composite video output connector.

3) S-VHS Output: An S-VHS connector for separate luminance and chrominance (Y/C)

signals

4) Spot out connector

5) Camera Outputs: BNC output (looping) connectors.

6) 75 Ohm Termination

7) AUDIO Input (1~4/8,)/Output (1) connectors: RCA

8) ALARM IN/OUT: For connecting alarm inputs (1~4/8) and alarm out relays (2).

9) VGA out connector

10) RS-422 Connector: For connecting to PTZ camera.

11) USB 2.0 connector: For connecting USB compatible devices.

12) RJ-45 Ethernet Port: For connecting to remote PC via Ethernet network.

13) RS-232C [D-SUB 9PIN] : For connecting to External Modem.

14) AC power socket (Selectable) :110V or 230V

15) Power Fan

1 3 13

14 5 4 2 9

11 8 15

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

12 DIGITAL VIDEO RECORDER

2) 8&16 Channel

1) Camera Inputs: BNC input connectors,

2) Composite Monitor Output: BNC standard composite video output connector.

3) S-VHS Output: An S-VHS connector for separate luminance and chrominance (Y/C)

signals

4) Spot out connector

5) ALARM IN/OUT: For connecting alarm inputs (1~16) and alarm out relays (2).

6) 75 Ohm Termination

7) AUDIO Input (1~8)/Output (1) connectors: RCA

8) Camera Outputs: 8ch – Individual BNC output / 16ch : Looping connectors.

9) VGA out connector

10) RS-422 Connector: For connecting to PTZ camera.

11) USB 2.0 connector: For connecting USB compatible devices.

12) RJ-45 Ethernet Port: For connecting to remote PC via Ethernet network.

13) RS-232C [D-SUB 9PIN] : For connecting to External Modem.

14) AC power socket (Selectable) :110V or 230V

15) Power Fan

6 7 8 9 11

3 4

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

13 DIGITAL VIDEO RECORDER

Remote Controller

Power

Log

STOP

PLAY

BACK UP

DVR ID

LOG

FAST FORWARD

DISPLAY MODE

SCHEDULE REC ON/OFF

ENTER

INFORMATION

EXT. SEARCH

REWIND

NUMBERS & ALPHABET

TIME SEARCH

ZOOM

STEP

RECORD

- BUTTON

+ BUTTON PAN/TILT/ZOOM

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

14 DIGITAL VIDEO RECORDER

INSTALLATION & CONNECTIONS.

Camera, Monitor, Microphone, Alarm sensor and Power cord.

< Example of 8ch DVR >

MICROPHONE#

Up to 8 cameras

POWER

COR

SENSOR

MONITOR

Spot Monitor 1

MONITOR

Up to 8 MIC

EXTERNAL

MODEM

PAN/TILT CAMERA

EXTERNAL

USB BACKUP

DEVICE

Up to 8 Sensors

CAMERA#1

MONITOR

PC system requirement for Network connection.

(a) 500MHz CPU

(b) 128MB RAM

(d) Windows 98SE, 2000, ME

(e) Spare 10/100-BaseT Ethernet Port

(f) RJ-45 Network Cable

(g) CAT-5 UTP Cable for LAN (Crossover cable for direct connect to PC)

The connection and remote viewing of the DVR may not be successful on all PC’s due to the variety of PC’s internet connection settings. Please contact the technical support for further assistance.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

15 DIGITAL VIDEO RECORDER

QUICK START PAGE

The Factory Default password for the unit is “000000”

The Default password to run the CMS software is “0”

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

16 DIGITAL VIDEO RECORDER

Time & Date Setting

When the DVR is powered on for the very first time, the time and date are set as default to January 1,

2005 Saturday 01:00:00. Before any other operation of the Digital Video Recorder, it is important to

setup the time and the date. Please refer to page 36 for setting the time and the date on the DVR.

Screen Position Adjustment

The screen position is adjustable during live view, only when CRT monitor (Composite

output) is used. Use the directional buttons to adjust the screen position to best fit the

monitor.

VGA monitor is not adjustable.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

17 DIGITAL VIDEO RECORDER

LIVE VIEWING

Display Overview

(1) (2) (3)

(1) Indicate Alarm In terminal is triggered by an alarm sensor. To disappear, press

[CANCEL] button.

(2) Indicate Motion detected. (3) Indicate Video Loss during Recording. To disappear, press [CANCEL] button.

(1) (2) (3) (4) (5)

(1) Indicate Built-in CD R/W is connected. It‟s changed to blue color while it‟s doing backup. (2) Indicate an USB Device is connected on Front panel. It‟s changed to blue color while

it‟s doing backup.

(3) Indicate an USB Device is connected on Rear panel. It‟s changed to blue color while

it‟s doing backup.

(4) Indicate Audio Data can be stored and playback when it shows up in blue. (5) It shows Number of Client, which is connected to Network.(MAX :5 users)

3. : Displays Month, Year, Time and Date.

4. : Displays available HDD space and estimated remaining recording

time.

Recording Mode

Event Indicator

Status

Camera No and Title

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

18 DIGITAL VIDEO RECORDER

ZOOM (Live & Playback)

: During live view mode or playback, it is possible to zoom into a section of the screen to get a close

up view of the screen.

1. To activate the digital zoom, select the full screen display of the camera you want to zoom.

2. Then press “Zoom” button in IR remote controller.

3. Press [-, +] button in remote controller to enlarge or decrease the image.

4. Move to the desired position using [] button.

5. Press again “Zoom” button to cancel this function.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

19 DIGITAL VIDEO RECORDER

OPERATION

Main Menu Overview

When the DVR is powered on, Live Viewing screen will appear after initialization about 30sec.

Press [MENU] button to access the main menu. An Admin Password Box will appear. Enter the password using Numeric buttons. Default password is „000000‟. Main Menu appears after

proper password entered, shown as below.

<Note> Factory default password is [000000]. It is recommended to change the “PASSWORD”

when you install the DVR. Refer to [System Setup].

１. Use Direction buttons [ ] to select the desired menu. Items selected in the menu are

represented in color.

２. Press [ENTER] button to select the menu and display Sub-Menu. Use Left/ Right buttons [ ] to

select on TAP menu. Selected items changed into [ORANGE] color.

* It is automatically saved changes when you move between TAP menus.

3. Press [CANCEL] to exit a menu without changes. Press [ENTER] button to exit a menu with saving changes.

Selected Not selected

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

20 DIGITAL VIDEO RECORDER

Display Option

1. DISPLAY SETUP

1. Use Direction buttons [ ] to select “DISPLAY” menu. Then, press [ENTER] button

to display “DISPLAY SETUP”.

2. Use Left/Right buttons [ ] to select on TAP menu ( ). Selected

items changed [ORANGE] color..

3. Use Down [] button to specify.

4. Use [-, +] button to change the values

ITEM

ADJUSTMENT

STATUS BAR

 Select “Show” or “Hide” below status bar on Main Monitor.

CAMERA

 Select On-Screen-Display information for Camera Number and Title.

BORDER LINE

 Select Border Line color between cameras.

WHITE  GRAY  DARK GRAY  BLACK

BACKGROUND

 Select Background color on NO VIDEO status.

GRAY  WHITE  BLACK  DARK GRAY

DISPLAY DEVICE

Select On-Screen-Display coordinates on Monitor.

- CCTV Monitor: Video out through Composite and VGA

- PC Monitor : Video out through VGA only

5. Save changes and exit the menu, press [ENTER] button.

Exit the menu without making changes, press [CANCEL] button.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

21 DIGITAL VIDEO RECORDER

2. SEQUENTIAL SETUP (Auto Sequence)

ITEM

DEFAULT

ADJUSTMENT

SEQ.

INTERVAL

1Sec

 Specify the dwell time of each camera or Multi screen mode is

displayed. Use [-, +] button : [1 second ~ 30 second]

SEQ. MODE

None

 Select desired sequence mode to switching.

FULL SCREEN

None

 Select the cameras to be included or excluded from the automatic

sequencing.

1) Full Screen Display.

It starts to do auto sequence when Sequence mode is activated. Select any camera

for Full screen display by pressing the Number button of the desired camera.

2) Multi screen Display and Sequencing Display.

Press [DISPLAY] buttons to activate the multi screen display. The sequence mode

and dwell times are programmable. If the sequence mode is not activated, it moves

to Quad mode instead of Sequencing.

<Note> Spot Monitor

1. Press [Spot] button, then press [DISPLAY] button for quad mode.

2. Press [Spot] button, then press any camera number button.

3. Then DVR will start auto switching cameras.

(Switching mode is synchronized with SEQUENTIAL SETUP.)

4. Press [Spot] button, then press any camera number button again to stop.

5. Press [Spot] button, then press camera number button you wish to watch as full screen.

6. Once an alarm is triggered, the unit switches to a full screen display of the camera in alarm.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

22 DIGITAL VIDEO RECORDER

Camera Setup

1. Use Direction buttons [ ] to select “CAMERA” menu. Then, press [ENTER] button to

display “CAMERA”.

2. Use Left/Right buttons [ ] or Number button to select the Camera you wish to configure.

3. Use Down [] button to move specified menu and use Left/Right buttons [] to

select other item.

4. Use [-, +] button to change the value.

ITEM

DEFAULT

ADJUSTMENT

COVERT

 If the Covert Mode is “YES”. Selected camera is invisible from

all live displays, playback and Network while continuing to record.

Covert cameras are viewable after change into “NO”.

BRIGHTNESS

50%

 The brightness of each camera can be adjusted by pressing [-,+]

buttons.

CONTRAST

50%

 The contrast of each camera can be adjusted by pressing [-,+]

buttons.

COLOR

50%

 The color of each camera can be adjusted by pressing [-,+]

buttons.

CAMERA TITLE

Camera #

 A combination of 12 digits and alphabets can be entered to label

each camera. Press appropriate Numeric button to type camera

title. It‟s up to 12 characters. See Next chart.

P/T/Z MODEL

None

 Select P/TZ camera model to control.

P/T/Z ID

 Select appropriated channel for the PTZ camera. Camera ID

means Camera address.

5. Save changes and exit the menu, press [ENTER] button.

Exit the menu without making changes, press [CANCEL] button.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

23 DIGITAL VIDEO RECORDER

1st Press

2nd Press

3rd Press

1st

2nd

3rd 1 A B 1

9 Q R

9 2 C D 2

10/0 S T

10 3 E F 3

11 U V

11 4 G H 4

12 W X

5 I J 5

13 Y Z

6 K L 6

14 . @

7 M N 7

15 - _

8 O P 8

SPACE

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

24 DIGITAL VIDEO RECORDER

Motion Recording

1. Use Direction buttons [ ] to select “MOTION” menu. Then, press [ENTER] button to

display “MOTION”.

2. Use Left/Right buttons [ ] or Number button to select the Camera you wish to configure.

3. Use Down [ ] button to move specified menu and use Left/Right buttons [ ] to select other

item.

4. Use [-, +] button to change the value.

ITEM

ADJUSTMENT

RECORD TIME

 Determines the duration of recording when motion is detected.

[20SEC ~ 240SEC]

CAMERA

SECTION

 Use Left/Right buttons [ ] or Number button to select the Camera you wish

to configure.

MOTION LEVEL

 Level 1: Low sensitivity~ Level 20: High sensitivity.

MOTION GRID

 Use this menu to setup Zones for the motion detection The screen shown

below will overlay the current video image.

 It is divided into 16 Grid and selected by Number button.

 : Select All.

 : : Clear All.

 Motion detected zones will be changed to GREEN Color.

Motion Detected

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

25 DIGITAL VIDEO RECORDER

5. Save changes and exit the menu, press [ENTER] button. Then go “RECORD” Menu.

6. Select “ON” or “OFF” to Enable or Disable motion detection per camera, as shown

below.

7. Press the REC button, then Motion recording starts according to configured Recording

Quality, Frame Rate when Motion detected. It will be back to stand-by mode after

motion recording time is end. Camera does not record under normal conditions.

<Note> Motion Duration will be extended if there is another motion detection while motion

recording.

<Note> There may be cases when the recorder‟s built-in motion detection function does not

operate properly due to the condition of the input video signal or other factors.

<Note> It is recommended selection of at least 3 motion blocks to get more accurate motion

recording.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

26 DIGITAL VIDEO RECORDER

Basic Recording ( Normal Recording)

The DVR comes with a certain preset settings from the factory. Therefore once the

DVR is installed, immediate recording is possible after pressing the record buttons. By

default, audio alarm, motion recording are off.

１. Use Direction buttons [ ] to select “RECORD” menu. Then, press [ENTER]

button to display “RECORD”.

２. Use Direction buttons [ ] to select the Camera you wish to configure.

３. Use [-, +] button to change the value.

ITEM

ADJUSTMENT

USE

 Enable or Disable Recording per camera.

QUALITY

 Specify the record picture quality for each camera.

ULTRA  SUPER  HIGH  MIDDLE LOW

RATE

 Select recording speed for each camera.

: Three types of recording modes are available: Frame, Field and CIF mode.

AUDIO

Select audio recording ON or OFF.

MOTION

Select Motion Recording ON or OFF. Camera does not record under normal

conditions. It is discussed on Motion Recording Section.

5. Save changes and exit the menu, press [ENTER] button.

6. Press [REC] button. Then, the red REC LED light on the front panel and recording

starts.

7. To Record stop, press the “STOP” button.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

27 DIGITAL VIDEO RECORDER

<Note> 1) You can setup maximum recording speed for each channel. Please refer to SYSTEM

/ GENERAL / REC. CHANNELS.

2) Estimated remaining Recording Time varies due to picture quality and capture rate

and is updated every 10 seconds due to variation of picture size.

3) Press [MENU] button on each Item at first line to apply all setting for the rest channel.

< Approximate File Size>

Quality

NTSC

PAL

UNIT

720*480

720*240

360*240

720*576

720*288

360*288

LOW

4.5

2.5

8.4

5.4

3.0

MIDDLE

8.5

4.5

16.8

10.2

5.4

HIGH

10 6 24

7.2

SUPER

15 8 33.6

9.6

ULTRA

14.4

It is calculated by theoretical, therefore it may be different depends on Video Signals or other

conditions in actual.



Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

28 DIGITAL VIDEO RECORDER

Alarm Recording

Please verify the alarm record settings prior to starting alarm recording. Please note that

alarm recording is independent of any recording modes. Alarm record starts after Alarm

Record Enable.

1. RECORD SETUP

1. Use Direction buttons [] to select “ALARM” menu. Then, press [ENTER]

button to display “Alarm Record Setup”.

2. Use Left/Right buttons [] to select on TAP menu ( ).

3. Use Direction buttons [] to select the Camera you wish to configure.

4. Use [-, +] button to change the value.

ITEM

ADJUSTMENT

USE

 Enable or Disable Alarm Recording on a per camera.

QUALITY

 Specify the record picture quality for each camera on Alarm Recording.

ULTRA  SUPER  HIGH  MIDDLE  LOW

RATE

 Select recording rate of each camera when Alarm is triggered

AUDIO

 Select audio recording: ON or OFF.

INPUT

 Specify the type of Alarm input Device.

<Note> Press [MENU] button on each Item at first line to apply all setting for the rest channel.

5. Save changes and exit the menu, press [ENTER] button.

Exit the menu without making changes, press [CANCEL] button.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

29 DIGITAL VIDEO RECORDER

2. ALARM SETUP

ITEM

ADJUSTMENT

RECORD TIME

 Determines the duration of recording after the alarm signal has been

activated. [10SEC ~ 240SEC]

RECORD CAMERA

 ALL: Start to record All Alarm “ON” channel if there is any Alarm signal is

triggered.

 1:1: Start to record the channel, which Alarm is triggered.

MOTION TO ALARM

 Select “ON” to use Motion detection like Alarm triggered

- From the LOG, it will be listed as Motion.

- The unit will not send E-mail

ALARM BUZZER

 ON: The buzzer Sounds if an alarm is triggered. The buzzer will sound for

the duration of the RECORD TIME. This buzzer related with Alarm

Out. Please configure Alarm Out “ON” for Alarm buzzer.

OFF: Disables the ALARM BUZZER function.

ALARM OUT1~2

 Configure which relay will be triggered when an alarm is activated per

camera. Select from four available options:

Video Loss, Motion, Alarm ALL, Each Alarm, System.

 Press [Cancel] button to stop Alarm Out.

It will be cleared by an order: Alarm>Motion> Video Loss

<Note> If “System” is selected, the relay will be triggered when System

has problems such as HDD FAIL,FAN LOCK etc.

<Note> Press [-] button to stop the buzzer immediately. Stopping the

buzzer does not stop the alarm recording.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

30 DIGITAL VIDEO RECORDER

6. Save changes and exit the menu, press [ENTER] button.

7. Press [REC] button after setting RECORD ENABLE. Then, the red REC LED lights on

the front panel and recording starts.

3. ALARM RECORD ENABLE

Select the usage of the Alarm Record. Mode 1~4 means for Schedule recording Mode 1~4

RECORD

Alarm

Resulting Actions

Normal

Motion

USE

Normal

OFF

Press the REC button, then Alarm recording starts according to

configured Recording Quality (Super), Frame Rate (15F/S) and

Audio when Alarm is triggered. It will be back to stand-by mode

after Alarm recording duration time is end. Camera does not record under normal conditions.

Schedule

<Note> ALARM SETUP can not be changed while recording.

Stop recording first, to change setup.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

31 DIGITAL VIDEO RECORDER

RECORD

Alarm

Resulting Actions

Normal

Motion

USE

Normal

OFF

Press the REC button, then Normal recording starts with High picture quality at 3F/S without Audio. When Alarm is

triggered on this channel, it changed to record with Super

picture quality at 15F/S with Audio. It will be back to Normal

Recording after Alarm recording duration time is end.

RECORD

Alarm

Resulting Actions

Normal

Motion

USE

Normal

Press the REC button, then Motion recording starts with

High picture quality at 3F/S without Audio when Motion

detected. When Alarm is triggered on this channel, it

changed to record with Super picture quality at 15F/S with

Audio. It will be back to stand-by for Alarm or Motion after

Alarm recording duration time is end. Camera does not record under normal conditions.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

32 DIGITAL VIDEO RECORDER

Schedule Recording

The schedule chart shows a graphical representation of the defined record mode: Mode1~4.

However, the schedules are displayed only when a corresponding schedule has been

configured in the schedule menu.

１. Use Direction buttons [] to select “SCHEDULE” menu. Then, press

[ENTER] button to display “Schedule Chart”.

２. Use Left/Right buttons [] to select on TAP menu

( ).

３. Use Down button [] to select any Day you wish to configure.

４. Press [Enter] button you wish to configure. The detailed menu pops up for selected

Day, as shown below.

５. Enter the beginning and end time, then select Record mode to record.

(1) BEGIN: The time of recording start.

(2) END: The time of recording end. The ending time must not be before the starting

time or the same as the starting time. It must be any time over the starting time.

(3) MODE: Up to 4 different recording modes can be pre-determined for schedule

recording. (MODE1 ~ MODE4)

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

33 DIGITAL VIDEO RECORDER

６. Define modes of below menu.

<Note>

 The recording time is set by 24H(00:00 - 23:59). You need to set 2 days if the setting is over

one day.

D/W

BEGIN

END

MODE

Monday

18:00

23:59

MODE 1

Tuesday

00:00

08:59

MODE 1

 The recording would not start when Ending time is ahead of Start time.

EX)

D/W

BEGIN

END

MODE

Monday

18:00

08:59

MODE 1

７. To activate the schedule recording after setting, press the SCHEDULE button. The

SCHEDULE indicator illuminates. When a program covers the current time, the unit

begins recording.

８. When the scheduled recording time is over, the REC indicator goes off and

recording stops.

９. If you wish to stop recording while scheduled recording, press the SCHDULE

button, then the SCHEDULE indicator goes off and the Schedule Recording Mode

is released.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

34 DIGITAL VIDEO RECORDER

Summary of combination

SCHEDULE

CAMERA USE MOTION USE Normal Mode1~4 MODE 1~4 CAMERA USE

Normal RECORD ON OFF OFF OFF OFF OFF

Motion RECORD ON ON OFF OFF OFF OFF

Alarm ALARM OFF OFF ON ON OFF OFF

Schedule SCHEDULE OFF OFF OFF OFF OFF ON

Schedule Motion SCHEDULE OFF ON OFF OFF OFF ON

Normal and Alarm RECORD & ALARM ON OFF ON ON OFF OFF

Motion and Alarm RECORD & ALARM ON ON ON ON OFF OFF

Schedule and Alarm

ALARM & SCHEDULE

OFF OFF ON OFF ON ON

RECORD

ALARM

RECORD MODE

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

35 DIGITAL VIDEO RECORDER

Network Setup

The static service consists of an IP address that remains constant for the duration of the

contract of the internet service, whereas the dynamic service consists of an IP address that

frequently changes every time a new connection is made through the provided modem, or

recurrently in a given period of time. Though most internet service providers offer both

solutions, this manual will distinguish the two solutions according to the commonly available

service type to configure the DVR for the networking purposes.

1. GENERAL

１. Use Direction buttons [ ] to select “NETWORK” menu. Then, press [ENTER] button to

display “Network”.

２. Use Down button [ ] to specify the detail.

３. Use [-, +] button to change the value.

４. Save changes and exit the menu, press [ENTER] button.

Exit the menu without making changes, press [CANCEL] button.

ITEM

ADJUSTMENT

CONFIG

 STATIC IP: Edit IP address, Gateway and Netmask.

 DHCP: Dynamic Host Configuration Protocol. It is automatically set on

from Local DHCP if there is Local DHCP server. It will not be selected if the

DVR is not connected WAN.

The host name will be unique to the DVR, and will be displayed something

similar to M10020E.

IP SETUP

 Edit “IP ADDRESS, GATEWAY, NETMASK”

PORT

 Select “0000 ~ 9999”

The DVR‟s connection port can be adjusted in case the default port 7000

is blocked. The DVR‟s service port may be modified to allow the

connection from CMS.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

36 DIGITAL VIDEO RECORDER

BANDWIDTH

 Unlimited is set by default. Select “64 KBPS~ 8MBPS”

ITEM

ADJUSTMENT

PING BLOCK

 No response for ping. Default by OFF

SCAN BLOCK

 No response for Auto Scan from CMS. Default by OFF

<Note> How to connect the DVR via Network in the case of DHCP.

1. Select DHCP.

2. Please check “Serial No” on System Menu.

3. Enter host name<ex: http://M10020E.dvrhost.com:7000> on Web browser or CMS.

DVR

Router

DVR

Dynamic IP

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

37 DIGITAL VIDEO RECORDER

2. E-MAIL

The DVR is capable of sending e-mails when an event occurs to up to 5 different e-mail

addresses: Alarm with image file, Video Loss, Power Loss (when power recovered), HDD

Failure.

There are two types of sending e-mail method; Using “Unique” or “Public/ your own mail

server”.

ITEM

ADJUSTMENT

USE

OFF

 Select the e-mail notification on or off. The default is off.

Default

 Select mail server: Default it is supporting by manufacture.

: You do not need to setup SMTP server.

SMTP

 Select mail server. SMTP then Setup below SMTP menu.

SMTP

Server

 Select Highlight SMTP Server and then press numeric buttons to define

an e-mail server.

PORT

 Define the port that the SMTP server will communicate through.

AUTH

 Select Authentication on or off. The default is off.

 Enter the user ID of Mail Server if your server needs Authentication.

(It is recognized as a small letter, even it‟s displayed as a Capital Letter)

Password

 Enter the password, if your server needs Authentication.

(It is recognized as a small letter, we do not support capital Letter)

E-mail Address

 Enter a desired e-mail address to send the notifications to.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

38 DIGITAL VIDEO RECORDER

System Setup

1. GENERAL

１. Use Direction buttons [] to select “SYSTEM” menu. Then, press [ENTER]

button.

２. Use Left/Right buttons [] to select on TAP menu

( ).

３. Use Down button [] to specify the detail.

４. Use [-, +] button to change the value.

５. Save changes and exit the menu, press [ENTER] button.

Exit the menu without making changes, press [CANCEL] button.

ITEM

ADJUSTMENT

SYSTEM ID

 To select the DVR to be controlled with the remote controller, press and hold

the DVR ID button. While holding the DVR ID button, press the appropriate

DVR ID number. For example, enter 05 for DVR ID 05, enter 43 for DVR ID

43, and such.

 Set the ID of IR controller on “00” to control DVRs at the same time,

whatever DVR ID are.

AUTO KEY LOCK

The DVR locks all the buttons after three minutes of inactivity like a

Screensaver. The buttons can be unlocked with the user password. Default by

“OFF”.

KEY TONE

 By default, the DVR emits a beep every time a button is pressed. Set the key

tone to off to turn button beep off. Default by “ON”

KEYPAD MODEL

 Select Joystick Controller and Baud Rate.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

39 DIGITAL VIDEO RECORDER

RECORD SIZE

 CIF : DVR records each camera individually and then multiplexes them.

Each channel records at Field resolution: 360*240(360*288).

 Field : DVR records each camera individually and then multiplexes them.

Each channel records at Field resolution: 720*240(720*288).

 Frame: 720*480(720*576)

REC CHANNEL

 You can setup maximum recording speed for each channel as below charts.

PB DEINTERLACE

 ON: Reducing image flickering but less picture quality.

 OFF: Better picture quality for still image but having flicker for moving

picture.

< Maximum recording speed for NTSC mode >

< Maximum recording speed for PAL mode >

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

40 DIGITAL VIDEO RECORDER

2. TIME

ITEM

ADJUSTMENT

TIME SYNC

If several DVRS are installed and connected via network, one of the DVRs or

PC may be set as the master clock. This unit will control the date and time for

all of the other units.

 ON: It is set as the Slave Clock.

 OFF(Default): Master Clock or The unit which does not use Time Sync

Function.

TIME SERVER

 Enter the IP of Master clock DVR or PC when the unit is set as [ON] on Time

Sync Menu.

DATE & TIME

 Enter the Date and Time.

Install “DVR TimeSynclnstller.exe “. It starts automatically.

The DVR will communicate though “UDP1143 Port” with Window for

TimeSync.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

41 DIGITAL VIDEO RECORDER

3. ACCOUNT

Admin can define each user‟s Authority. Select User 1~5 , then select Activate option on or off. When enabled, it will be possible to check individually under user settings: Monitoring,

Playback, Back up, Network, Configuration (Main Menu Setup), Shutdown (Power off).

Enter the 6 numbers for the new password, and then re-enter the same password under

COMFIRM section. The asterisks will advance automatically as the numbers are entered.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

42 DIGITAL VIDEO RECORDER

4. DISK

ITEM

ADJUSTMENT

FORMAT

1. Stop the DVR completely before the disk format.

2. Use [-, +] button to change select device..

Internal HDD, RACK-CD/RW or DVD RW, USB (Front), USB(Rear)

3. Use down button [] to move , then press [ENTER]

button to start formatting.

4. Formatting will begin, and the progress will be displayed at the bottom of the

window. Please note that it takes 10~30 seconds for format a HDD.

5. When formatting is finished, it will display COMPLETE, and also SUCCESS at

the bottom of the window.

INTERNAL HDD

Select the record policy of the internal hard disk drive. By default, the hard disk

drive will overwrite from the beginning when it becomes full.

 REPEAT RECORD: It starts to overwrite HDD from the oldest file of Internal

HDD when the Hard Disk is full.

 MANUAL: It stops recording after HDD is full.

EXTERNAL HDD

 Same with Internal HDD for External HDD

DISK MONITOR

 It stops automatically if HDD failure happens. It starts to “Monitoring” again after

DVR reboot . (Use [-, +] button to stop or start)

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

43 DIGITAL VIDEO RECORDER

5. INFO

This menu provides information such as listed below.

Indicator

CONDITION

MODEL

 Display Channel Number and compression.

SERIAL NO.

 Display the Unique Number of this unit(Host Name).

LANGUAGE

 Display the language of this unit.

NETWORK

 Shows the current IP and Port of this unit.

MCU VERSION

 Shows the MCU version of this unit.

FPGA VERSION

 Shows the FPGA version of this unit.

BIOS VERSION

 Shows the BIOS version of this unit.

LINUX VERSION

 Shows the LINUX version of this unit.

APP VERSION

 Shows the Application version of this unit.

INTERNAL HDD

 Displays numbers of HDD and total HDD size .

RACK DEVICE

 Displays what kind of device is installed into RACK : DVD or CD/ HDD

USB (FRONT)

 Displays what kind of device is connected to the front USB connector.

USB (REAR)

 Displays what kind of device is connected to the rear USB connector.

IDE BUS 0

 Shows the Primary IDE HDD. A : Master, B: Slave

IDE BUS 1

 Shows the Secondary IDE HDD C : Master, D :Slave

<note> Internal CD/DVD-RW is set on Slave by default

TEMPERATURE

 Not used at this time

VOLTAGE

 Not used at this time

FAN

 Shows the status of System FAN. : Good-Bad-Warning

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

44 DIGITAL VIDEO RECORDER

PAN/TILT Zoom Control

1. To activate the Pan/Tilt Control, select the full screen display of the camera you wish

to control.

2. Then press the [P/T/Z/FOCUS] button. Shortcut Menu box pops up, as shown below.

INDICATOR

RESULTING ACTIONS

[ENTER] Button

 Press this button to display “HELP” Menu. Press [ENTER] Button again, or [CANCEL] button to cancel Help Menu.

[CANCEL] Button

 Press this button to cancel “PAN/TITL” Operation.

[MENU] Button

 PTZ camera control interface will be extended to use whole function. Press

this button again to make short-cut menu.

 To Tilt up and Down.

 To pan Right and Left.

<Note > Please Refer to Help Menu for specific control.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

45 DIGITAL VIDEO RECORDER

 Zooming In and Out.

** Please check below items before using PTZ Camera.

1. RS 232/485 connection, camera Jumper Setting and etc

2. Set the PTZ Camera ID & MODEL NO at the Display menu

* Preset / GoTo / Auto Tour

Automatic PTZ control offers basic automatic pan, tilt, or pan and tilt for the PTZ cameras. It is also

possible to customize the PTZ path as well as the focus, zoom and iris of the PTZ camera. All of these

features can be stored as a preset.

1. PRESET (SPOT OUT on remote controller)

1) After moving the PTZ camera to the desired position,

then press PRESET button.

2) Select the Preset number, then press [Enter] to

confirm the selection.

2. GOTO (INFO on remote controller)

- Press [GOTO] button then Numeric button to move preset

positrons.

3. Auto Tour (BACKUP on remote controller)

- Press [Auto Tour] button then numeric button. . For

example, enter 05 for auto tour, it will start to automatic tour

from 001 to 005 .

1. PRESET

2. GOTO

3. AUTO Tour

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

46 DIGITAL VIDEO RECORDER

* Buttons for special function

1. CUSTOM 1,2,3 (DISPLAY / ZOOM / PTZ on remote controller)

: These three buttons are for special function of particular PTZ..

2. AUTO PAN / TILT (STOP / REW on remote controller)

: For particular PTZ, you can activate AUTO PAN / TILT.

3. RUN PATTERN (PLAY on remote controller)

: For particular PTZ, you can run PATTERN.

4. POWER (FF on remote controller)

: For particular PTZ, you can power on/ off PTZ.

5. MENU (REC on remote controller)

: For particular PTZ, you can go into PTZ menu directly. But it can be used for other

function.

6. ESCAPE (SCHEDULE on remote controller)

: For particular PTZ, you can escape from menu. But it can be used for other function.

7. SPEED DOWN / UP (STEP <I / I> on remote controller)

: The speed of PAN / TILT in manual mode can be controlled.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

47 DIGITAL VIDEO RECORDER

<Note> Speed has 0~8 steps

1 (Slow) – 8 (Fast)

* 0 – The Speed is increasing as long as you press.

* Please refer to below camera list for specific functions.

Please refer to the PTZ manufacture‟s instruction manual for proper jumper settings to match

the protocols to the DVR.

* PTZ Camera Model - PAN/TILT/ZOOM Camera List

Model Name

Speed

Preset

Goto

Tour

Pan

Tilt

Pat

Esc/

Enter

Cus3

NUVICO, NV 9600 BPS

o o o o o o o

Night

Shot

BLC

WDR

MERIT LILIN, PIH-

7000/7600

o o o o o o o o Reversion

IR Filter

Wiper

VCL, Orbiter Microsphere

o o o o

SAMSUNG, SCC-641

o o o o o o o

NEC, NC-21D

o o o o MEM Init

SUNKWANG, SK2107

o o o o o

RESERVED

o o o o o

D-MAX, PTZ PROTOCOL

o o o o o o Alarm

Relay 9

LG, LPT-A100L P/T/Z

HONEYWELL, GCC-

655N

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

48 DIGITAL VIDEO RECORDER

WONWOO, PT-101

12~14

PELCO, D 2400~9600

o o o o o o o o

C&B TECH, AN200

o o o Tour 1~4

CANON, VC-C4

o o o Host Ctrl

Cascade

17~19

PELCO, P 2400~9600

o o o o o o o o

20~22

PELCO, EP 2400~9600

o o o o

Pattern

Set

Pattern

Run 23

PANASONIC,

WV-CS/W85x,86x

o o o o o o Endless

Patrol

Ctrl

Patrol

Learn

HONEYWELL, HSDN-

251N/P o o o o 25

GE/KALATEL,

CyberDome

o o o o o D&N

Zero Lux

DY ELEC, SmartDome

o o o o o Left Limit

Right

Limit 27

BOSCH, TC8560/TC700

o o o o

SYSMANIA, ORX1000

Light

Wiper

Aux

AD, DELTADOME

o o o o o

HUNT, HTZ-2300

o o o o o o Left Limit

Right

Limit 31

HAZEM, RESERVED

o o o o

RVT, EZ Protocol

o o o o o o o

Night

Shot

BLC

WDR

LG, Dome Protocol

o o o o o Alarm 1

Alarm 2

Alarm

ELMO,

PTC-200C/400C

o o o o

NICECAM, MP-1xxx

o o o o Mem Init

C&B TECH, CNB-

PTZ102 o o o o o

Tour 1~4

Left/Up

Limit

Right

/Down

Limit

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

49 DIGITAL VIDEO RECORDER

SEARCH/ PLAYBACK

Time Search

1. To start playback, press

[Time Search] button, Time search Calendar Menu

pops up, as shown below.

2. Use Left /Right button to change select Month on .

3. Use Up/Down buttons [ ] to select “DAY” on Calendar. Selected data will be shown

as a graphical representation of the recorded video stored on the DVR.

4. Select “Hour and Minutes“ or ”the camera” you wish to playback. Then press [ENTER]

button.

<Note1 > It will not be changed if there are no stored data on previous/next month. <Note2> The data are color-coded by category: Alarm(Red) > Motion(Green) > Normal (Yellow)

<Note>

Time : Multi-screen Display

Camera : Full screen Display

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

50 DIGITAL VIDEO RECORDER

5. Press [ENTER] button to start playback.

<Note1 > Playback will be stopped after 30minutes, if there is no change of playback mode. <Note2> In the case of full screen still mode, the channel cannot be switched to the other

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

51 DIGITAL VIDEO RECORDER

Log List Search/ Alarm, Motion Search

The logs can be used to search and review directly to a point in time of the recorded data.

Alarm, motion, video loss and system related logs can be searched and played back directly

from the time of the incident.

１. To start Event Search, press [INFO/Log] button, then Log List Menu pops up,

as shown below.

MENU TAP

CONDITION

ALL

 It has a list of all the events since the initial power on procedure of DVR

SYSTEM

 It shows All Event except for Alarm, Motion, and Video Loss.

ALARM

 It shows All Alarm List.

MOTION

 It shows Motion List.

VIDEO LOSS

 It shows Video Loss List.

2. Use Up/Down buttons [] to desired “Time” to playback. Use Left/Right buttons

[] to move NEXT page.

3. Press [ENTER] button to start playback.

<Note> Log list is saved on HDD. <Note> To save log list, please connect USB memory stick into USB port on Front or Rear.

Then press Menu button on each category to backup Log data

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

52 DIGITAL VIDEO RECORDER

EXTERNAL SEARCH

This button allows searching for data from the external devices connected through the USB

ports.

1. Please connect to external HDD to USB port on Front or Rear.

(Insert a backup Media into Built-in CD/DVD.)

2. Press [EXT. SEARCH] button. Then External Search menu will appear.

3. Please select the device to search, then press [ENTER] button.

(The search of CD-ROM backup is not available.)

Time search Calendar Menu pops up, as shown below.

4. Following steps are discussed on “SEARCH”

<Note> Do not try to search for backup CD/DVD-RW.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

53 DIGITAL VIDEO RECORDER

BACKUP

Internal CD R/W

For convenience, this has a built-in CD-RW where the backup can be made easily.

1. Insert a blank Media into Built-in CD.

<Note>

１. If there are data in CD-RW (Re-writable) or DVD-RW, please format the CD-RW or DVD-

RW first. Disk Format is discussed in System ->DISK Menu.

２. Press STOP button, if DVR is doing playback.

2. Press [BACKUP] button and the backup menu will appear. Then enter the

administrator‟s password when the password prompt appears.

3. Use Left/Right buttons [] to select on TAP menu ( )

4. Use [-, +] button to change select device: Rack-CD Rom.

5. Please select the data for BACKUP.

: Select the recorded data type to be included on the backup CD. The illustration to

the left has selected ALL CAMERA, NORMAL, ALARM and MOTION data. For

CD-R & CD-RW Backup, you cannot select individual channel. Individual

Channel Backup is only supported in USB Flash Memory Stick and External HDD.

(1) NORMAL: Normal Recording Data

(2) ALARM: Alarm Recording Data

(3) MOTION: Motion Recording Data

6. Enter the numbers as required in 24-hour format, then move to .

7. Press [ENTER] button to start BACKUP.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

54 DIGITAL VIDEO RECORDER

* CD indicator will be changed to BLUE Color that the backup is in session.

RACK-CD ROM

 The progress of the backup will be displayed at the bottom of the window in

percentages of the entire backup process. Please note that the internal CD-RW

icon‟s color will change to blue to signify that backup is in progress. The OSD will

disappear after 1 minute. However, pressing Backup button again will show the

Backup status.

8. When finished, the CD icon will changed to Grey color, and then eject the media.

 If there is not enough space on the media, the DVR will automatically eject the disk

when it’s full, then will resume the process once a new media is inserted into the

drive.

<Note> Backup process to the CD-RW and DVD-RW only works on manual method due to the limited capacity of the medium.

 The CD Playback software will simply “auto-run” and does not require the installation of

software on you PC.

1. Channel Select

2. Control Playback

3. Watermark

4. Printout

1 2 3

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

55 DIGITAL VIDEO RECORDER

External USB HDD

To Read USB backup HDD in Window, please use FAT32 formats.

To use bigger sized HDD, you need to format in our own methods. Format is discussed in

“SYSTEM>DISK” Section.

The external hard disk drive offer two different backup methods: MANUAL AND AUTOMATIC.

The manual backup procedure is the same as using the internal CD-RW for backup. This

section will cover the automatic procedure only.

1. Please connect to external HDD to USB port on Front or Rear.

2. The USB indicator will be appeared after connection, which takes about 5sec.

USB Port on Rear

USB Port on Front

3. Press [BACKUP] button and the backup menu will appear. Then enter the

administrator‟s password when the password prompt appears.

4. Use Left/Right buttons [] to select “Auto Backup” on TAP menu

5. Use [-, +] button to change select device: USB(Front or Rear)-HDD.

6. Please select the data for BACKUP.

7. Press [ENTER] button to start BACKUP.

* <NOTE> It will start to back up from the latest file.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

56 DIGITAL VIDEO RECORDER

<Note > The following brand of external USB HDD Raid are tested and recommended.

 Proware DP-405CI

: http://www.proware.com.tw/products/catalog_pdf/dp-405ci.pdf

 Proware SB-2805CI:

: http://www.proware.com.tw/products/catalog_pdf/sb-2805ci.pdf

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

57 DIGITAL VIDEO RECORDER

USB Flash Memory

1. Please connect to external USB Flash Memory to USB port on Front or Rear.

2. When an external hard drive is connected through the USB port on Front or Rear, USB

indicator will be appeared.

USB Port on Rear

USB Port on Front

3. Press [BACKUP] button and the backup menu will appear.

3. Use Left/Right buttons [] to select on TAP menu ( )

4. Use [-, +] button to change select device: USB-Memory Stick

5. Please select the data for BACKUP.

A. Camera 1~16; This menu is activated only Memory Stick and external USB

HDD is connected.

B. NORMAL: Normal Recording Data

C. ALARM: Alarm Recording Data

D. MOTION: Motion Recording Data

6. Enter the numbers as required in 24-hour format, then move to .

7. Press [ENTER] button to start BACKUP.

<Note > DVR may detect USB Flash memory as an external USB HDD, when the capacity of

USB memory is bigger than 4GB.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

58 DIGITAL VIDEO RECORDER

<Note > The following brand of USB memory sticks are tested and recommended.

Brand

Model Name

Memorive

Memorive 256MB

ELECOM

MF-FU2512B2GT (512MB)

BUFFALO

Clip Drive (512MB)

LOGITEC

LMC-512UD2L (512MB)

LG X-TICK

602RUTJ00545 (256MB)

LG X-TICK

602RUTJ00545 (256MB)

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

59 DIGITAL VIDEO RECORDER

Back up range setup

It is possible to set up backup range automatically on Time Search Menu[by Month, Date,

Hour, Minute]

Press [-] button to set backup Start time , press [+] button to set End. Selected time will be changed [Light Grey] Color.

Selected backup time from 15:05~15:15 will be displayed on Backup range.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

60 DIGITAL VIDEO RECORDER

CLIENT PROGRAM

- Central Management Software

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

61 DIGITAL VIDEO RECORDER

INSTALLATION

1. PC system requirement

Minimum

Recommended

Windows 98SE, 2000, ME, XP

Windows XP

CPU

Pentium II Celeron 333

Pentium Ⅳ 2.8 G

RAM

128MB

512MB RAM

Video Card

4MB

16MB

HDD Free Space

20MB

2 GB

Resolution

1024*768

etc

Direct X 6.0 or higher

Direct X 8.0 or higher

Overlay YUY2 Surface Supported

If the PC does not meet the minimum system requirement, the CMS program may not function

properly. All programs related to CMS have been tested under a single task environment; therefore if

multiple tasks are run simultaneously, unexpected error may occur. Moreover, the program may

malfunction if inappropriate codecs have been installed on the PC.

CMS may not run if DirectX 6.0 or earlier version is installed. Please download the latest Direct X

from Microsoft.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

62 DIGITAL VIDEO RECORDER

2. HOW TO INSTALL

(1) Insert “Client Install CD” to CD-ROM of your PC and Find “DvrPlayerinstaller.exe” and

double click .

(2) Click 「NEXT」 button below:

(3) Click 「Install」. Otherwise, designate a directory for Install then Click “Install”.

(4) Click 「Close」Button after below images appears.

(5) The ICON of CMS will be displayed on your desktop.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

63 DIGITAL VIDEO RECORDER

(6) Double click the ICON to start, enter the password to access.

* Enter “0” as the default password. Refer to CMS Setup to change the password. To get rid of this screen, Press “ESC”

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

64 DIGITAL VIDEO RECORDER

FEATURES

1. CMS Overview

2. Functions

(1) Display option / Multiscreen Displays

a. Full Screen Display. g. 10- Way Screen Display.

b. Quad Screen Display. h. 16- Way Screen Display.

c. 6- Way Screen Display. i. 25- Way Screen Display.

d. 7- Way Screen Display. j. 36- Way Screen Display.

e. 8- Way Screen Display. k. 49- Way Screen Display.

f. 9- Way Screen Display. l. 64- Way Screen Display.

Multiscreen selection

Current CMS Mode

Time and Date

Live /PB mode Switch

Quick Button

Playback Button

Pan/Tilt Control

Power ON/OFF

Health Report DVR Window Virtual DVR Window

Add/Delete DVRs

Live Viewing Camera CH No. Audio Volume

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

65 DIGITAL VIDEO RECORDER

(2) Time and Date Display

It shows you current time on LIVE Mode and Playback time on PB mode.

(3) Live /Playback mode Switch

a. LIVE Viewing.

b. Remote Playback or Playback for Downloaded file.

(4) Quick Button

a. Save the current live images. When the remote recording is in

progress,

the record button will change its color to cyan.

(Default Location: C:\Program Files\DvrPlayer\Download )

b. Save a snap image or print current monitoring images.

c. OSD On/Off button.

d. CMS Setup.

Month Date Day of Week

Hour Minutes Seconds

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

66 DIGITAL VIDEO RECORDER

* CMS Setup

① General 1

< C.F> Control Hardware Acceleration

ⓐ Click the Advanced button on Display Properties on your PC.

ⓑ Select “Troubleshoot” and slow down Hardware Acceleration.

ⓐ → ⓑ

a) OSD SETUP

Select On-Screen-Display information such as the

Time, DVR name, Camera Number, Camera Name,

Frame Rates for each camera.

b) OVERLAY (Default)

It is recommended to use OVERLAY for

transmission speed up. Please cancel the Overlay

function if there is broken screen caused by Invalid

Video Driver installed. If you still have the abnormal

screen problem, please slow down the Hardware

Acceleration.

c) Video Mode

Select NTSC or PAL

d) DOWNLOAD

Designate a directory for file Download

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

67 DIGITAL VIDEO RECORDER

② GENERAL 2

a) POS

Setting to limit the POS item search.

b). Log

Setting to limit the Display of Logs.

c). Check Watermark

Setting to check for watermark.

d) Auto Full Screen for Alarm Event

Setting to perform a full screen pop-up for

alarm event.

③ Password

– Changing the password

a) Old Password : Enter your current password.

b) New Password: Enter the NEW password.

c) Confirm Password: Enter the New password to confirm.

- Press APPLY button to change the password. (NOT OK button)

<Note> This password is for protection screen when you launched CMS. This is different from

your DVR password.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

68 DIGITAL VIDEO RECORDER

④SOUND

Audio alert setting for the CMS. You can toggle to enable the sound or to disable the sound

from the software.

 Connect: CMS will emit a sound when a DVR connects.

 Disconect: CMS will emit a sound when a DVR disconnects.

 Alarm: CMS will emit a sound when an alarm is triggered from the DVR.

 Motion: CMS will emit a sound when the DVR detects a motion.

 Video Loss: CMS will emit a sound when there is a Video Loss.

(5) Playback Control Buttons

- These buttons only function when reviewing downloaded files.

1. . To begin reverse playback, press Reverse Play button

2. To stop playback, press the STOP button.

3. To start playback, press PLAY button.

4. To view the field directly before the field you watched.

5. To view the field directly after the field you watched..

6. To Control playback speed on Local DVR mode.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

69 DIGITAL VIDEO RECORDER

(6) PAN/TILT Control button.

If one or more Pan/Tilt/Zoom Cameras are installed on the DVR, they can be individually

selected and controlled using the PTZ control box. To control a channel-specific PTZ

camera, simply click on the channel where the PTZ camera is connected.

a. Pan and Tilt

Indicator

Resulting Actions

Indicator

Resulting Actions

To tilt up

To tilt down

To pan left

To pan right

To go upper left hand.

To go upper right hand.

To go down left hand.

b. Focus

Indicator

Resulting Actions

Focus Far

Focus Near

Focus Auto

c. Iris

Switch to Compact Interface

Switch to Full Interface

Zoom IN

Zoom Out

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

70 DIGITAL VIDEO RECORDER

Indicator

Resulting Actions

Iris Open

Iris Close

Iris Auto

d. Tour

Indicator

Resulting Actions

Set Tour by clicking. Total address is depends on connected Pan/Tilt

Camera.

Go To, Calls up preset

Start Automatic Tour

e. Special Function Key

: These three buttons are for special function of particular PTZ.

f. Auto Pan / Tilt / Pattern

Indicator

Resulting Actions

Runt Auto pan

Run Auto tilt

Run Pattern

g. Menu and Speed

Indicator

Resulting Actions

Go into Speed Dome menu

Escape from Speed Dome menu

Control the speed of PAN/ TILT in manual mode.

h. Pan/ Tilt Power

Stand by Pan/Tilt or Turn on/off the lights of P/T/Z camera.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

71 DIGITAL VIDEO RECORDER

(7) HEALTH

Displays the name of the last five DVRs with an problem or event. The color will change

appropriately based on the event or problems reported from the DVR.

a. Red

b. Yellow

c. Blue

The color changes to red when critical functions of the DVR is interrupted or

has failed: Connection Fail, Connection time out, Disconnect Power Fail, Fan

Lock, System Fail, HDD Fail, Power Fail Recover, Fan Lock Recover, System

Fail Recover, HDD Fail Recover

The color changes to yellow when recording and alarm related events occur:

Video Loss, Video Loss Recover, Alarm Detect, Motion Detect, Record Stop,

Schedule Off, Backup operation Stop

The color remains blue as long as the DVRs are functioning within the normal

parameters. It will display the DVR‟s set name only with the following functions:

Record Start, Backup operation Start, Schedule On

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

72 DIGITAL VIDEO RECORDER

* Health Report

Health Report menu is provided so that users may quickly overview all the condition of

connected DVR. You can check maximum 300 DVR statuses such as Failure, Event, Recording

Mode and etc

Health Report can be accessed at any time by double-clicking “HEALTH”. The detail log lists

can be showed by double clicking Name on Health Report or ICON on DVR Window.

Block Color

Condition

Solid RED

An Event or a problem had occurred.

Blinking RED

Current event or a problem.

Solid Yellow

Current status of the DVR.

<Note>In case of network connection error or power failure, DVR Number and DVR Name will blink in red

a. HDD FAIL: Notify Hard Drive Disk failure during the operation.

b. FAN LOCK

a) SYS. FAN: It shows defect of FAN on side of DVR

b) CPU FAN: It shows defect of FAN on CPU

c. EVENT

a) AL: Alarm

b) MO: Motion

c) VL: Video Loss

d. OVER TEMP.

a) SYS.: DVR temperature check

b) CPU: CPU temperature check

e. REC. OFF : Indicate REC LED ON/OFF on DVR

f. SCHE. OFF: Indicate Schedule LED ON/OFF on DVR

g. BACKUP OFF: Indicate Backup status on DVR

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

73 DIGITAL VIDEO RECORDER

** DVR Property

The Property of DVR can be viewed by Double Click “DVR NO or DVR NAME”.

This menu provides information such as listed below.

a. DVR MODEL

b. SYSTEM TIME: Display the time and date of DVR

c. RECORD : Configure current Normal recording channel.

d. ALARM : Configure current Alarm recording channel.

e. MOTION : Configure current Motion recording channel.

f. VIDEO LOSS : Configure current Video Loss channel.

g. HDD SIZE : Available HDD/ Total HDD

h. BACKUP SIZE: Available USB HDD/ Total USB HDD

i. REC. REMAIN: Estimated Remaining Recording Time

j. HDD : It shows defect of Hard Disk.

k. SYSTEM FAN: It shows defect of FAN.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

74 DIGITAL VIDEO RECORDER

** CMS LOG LIST

This menu provides CMS log while CMS is operating. For more specific information for each

DVR, please refer to DVR Log list.

** DVR LOG LIST

- It shows the same log list with DVR Set. It has a list of all the events since the initial power

on procedure of DVR.

- Selected message or time will be play-back by double clicking.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

75 DIGITAL VIDEO RECORDER

DVR CONTROL

1. Set List Manager

- Set List Manger is mainly used to add or delete DVR on CMS. Click button to start the

Set List Manager.

(1) Auto Scan

It automatically tracks down DVRs connected local network but skips over already on the

list. The DVR Host Name is entered automatically to the title and default Password is

000000(USER).

(2) Add to List

Please follow steps to add desired DVR on CMS.

1) Set Name: Type on DVR title to display on Monitoring window, Health window and

DVR Window.

2) IP: Enter the IP address<ex:192.168.0.52> or DNS name. <ex: demo.dvrhost.com>

3) Port: 7000<Default>

4) Password: Select from the following options:

- User Password: Live Monitoring and remote Playback, Search.

- Admin Password: All functions.

5) Add to List: Click “Add to List” to complete add the DVR onto CMS list.

6) Save changes and exit the menu: Select “OK”.

7) Exit the menu without making change: Click “Cancel”

 APPLY: It is used for changing the configuration of selected DVR.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

76 DIGITAL VIDEO RECORDER

(3) DEL FROM LIST: Delete selected DVR from CMS List.

(4) SETUP: It shows the menu setting of selected DVR.

(5) PROPERTY: This menu provides information such as DVR Name, IP number & port,

Software version, and what kind of DVR is.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

77 DIGITAL VIDEO RECORDER

2. Condition of DVR

The condition of DVR menu is provided so that users may quickly check the condition of each

connected DVR. Each Icon means listed below.

(1) Normal

(2) Network Connection in progress

(3) Network Error/Disconnection

(4) System abnormality

① Exit the menu with clear the statues and back to

blue colored DVR : Select “OK”

② Exit the menu with keeping previous statues:

Select “x (Close)”

①

②

Blue colored DVR means the DVR is working without any problem.

When you click this icon, it displays current live view.

Orange colored DVR means CMS is trying to connect to the DVR through

network. When you click this icon, it shows the message < Connecting...

Please stand by> with “try again” and “cancel “ button

Pink colored DVR means the disconnection of DVR caused by network

error or invalid password. CMS try to connect the DVR at every 30 sec in

the case of network connecting error. When you click this icon, it shows

this message <Network connection error> or <Invalid Password>. Please

change the password on [Set List Manager] in the case of invalid

password.

Orange colored DVR means there is an event or system problem.

When you double click this icon, CMS Log List pops up.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

78 DIGITAL VIDEO RECORDER

3. Indication of Camera

In addition to the Health Status Report and supplementary information from the DVR icons

in DVR window, the Camera Status Bar displays the status of individual cameras. The cameras

are displayed according to the channel.

(1) Click the desired DVR

(2) then it shows the information of camera.

(3) Each Icon means listed below.

1) (Blue) : Video Input is connected without recording.

2) (Dark Blue) : Video Loss

3) (Red) : Recording the current channel.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

79 DIGITAL VIDEO RECORDER

4. Live Viewing

(1) Individual DVR monitoring

Double click “ or “ to display live.

(2) On-Screen Indicators

There are four types of on screen indicators. OSD Display can be chosen in the CMS Set UP.

1) Camera Title: Displays the following orders: Camera Number- DVR Name or Host Name

-Camera title

2) Time : Displays time.

3) DVR Status: Displays REC, Network connection, Video Loss, Event, and Current Status.

Indicator

Condition

REC

Normal Recording

Wait

At the initial connecting

Loss

Video Loss

Disconnected from DVR

Alarm

Alarm Recording

Motion

Motion Recording

Playback for selected channel.

Live

Live viewing

4) Field per Second: Network transmission speed. The transmitted field rate is Different form the

actual recording field rate of the DVR.

① Camera Title

③ DVR status

② Time

④Frame Rate

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

80 DIGITAL VIDEO RECORDER

(3) Multi-screen Display

Click the individual Multi-screen buttons to display corresponding multi-screen.

(4) Change the camera position.

Click on each camera to directly switch the desired camera.

(5) Full Screen Display

There are 2 way of Full Screen display.

1) Select any camera for Full Screen display by double clicking the window of desired

camera. (To come back to previous Live viewing mode, please double click again.)

2) Select any camera for Full Screen display by clicking Right Mouse button.

(6) Dual Display (Simultaneous Playback with Live Viewing)

Individual channels can be selected and begin remote playback while the rest of the

channels are in live monitoring mode. Dual display is available for both individual DVRs and

Virtual DVRs.

1) Select any camera for playback during live monitoring. Context Menu will appear on

screen by Right- clicking.

Context Menu

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

81 DIGITAL VIDEO RECORDER

2) Select Search. Remote Search Menu will appear, as shown below.

3) Select desired DVR and Time & Date for Playback. To begin playback, click “Play”

button. (See “Playback” section).

<Note> If there are no minutes data for the selected time, it means there is no

recorded video for the selected camera.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

82 DIGITAL VIDEO RECORDER

4) Selected camera begins playback during live viewing.

5) To stop playback, Right clicking.

6) Then, Context Menu will appear. Select ” Live”.

Live viewing

Playback

Motion

Recording

Playback

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

83 DIGITAL VIDEO RECORDER

5. Context Menu

The context menu allows access to the submenus for the channel, DVR and the Virtual DVR. The

submenus allow access to various features for each individual submenu type.

(1) There are three types of Context Menu during Live Viewing. Right Clicking to display Context

Menu.

1) SEARCH: Remote Search for Playback.

2) FULL SCREEN: Full Screen Display.

LIVE

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

84 DIGITAL VIDEO RECORDER

(2) There are four types of Context Menu on playback during Live viewing. Click Right Mouse

Button to display Context Menu.

1) SEARCH: Remote Search for Playback. (See Next page Playback)

2) LIVE: To stop playback and come back to live viewing.

3) FULL SCREEN: Full Screen Display.

(3) There are seven types of Context Menu on each DVR.

1) LIVE: Live display for selected DVR.

2) PROPERTY: DVR information

3) CMS LOG LIST

4) DVR LOG LIST

5) SETUP: See “DVR Menu Setup”

6) REMOVE: Delete the selected DVR from DVR Window.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

85 DIGITAL VIDEO RECORDER

6. Playback

DVRs that have been added onto the DVR window using the DVR Set List Manager can be accessed

in Playback Mode for remote playback or to download the files onto the remote PC. Unlike the live

mode, only one DVR can be accessed at a time

(1) To start playback, press PB button .

(2) It will be switched to Playback Mode, as shown below.

(3) When button pressed, Remote Search Menu will appear.

(4) Select button or button for playback.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

86 DIGITAL VIDEO RECORDER

1) Remote Playback

Remote Playback is provided so that users directly playback the stored video on the

internal HDD through CMS.

① Select button and desired DVR.

② Remote Search shows a graphical representation of the recorded video

stored on the DVR. The Data are color-coded by category: Alarm(Red) >

Motion(Green) > Normal(Yellow).

③ Select desired Date and Time. By Click and drag, it is possible to select

longer minutes. Click button to start playback.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

87 DIGITAL VIDEO RECORDER

2) Remote Download

Remote Download is provided so that users save on remotely connected computer

through CMS.

① Select button and desired DVR.

② Remote Search shows a graphical representation of the recorded video stored

on the DVR.

③ Select desired date and time and click button to start save. It

will be saved on “C:\Program Files\DvrPlayer\Download”. Download directory

can be changed on CMS Setup Menu .

a. BEGIN – END: Indicate the Start time and End time of selected File.

b. CURRENT : Indicate the time of current downloaded file.

c. Download Cancel: Select

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

88 DIGITAL VIDEO RECORDER

d. Download Complete: Current time will be changed to message

“ Download Complete” after the download has been completed, as

shown below.

Click

3) LOCAL

Local Menu is mainly used to review the data downloaded from a DVR through CMS.

① Select button. ② Local Search shows a graphical representation of the stored file on the PC.

③ Select desired DVR, Date and time, then click button to start playback.

④ : Deleted selected file from the PC.

⑤ : Save selected file onto another folder of the PC or other drive.

⑥ :To Review back-up CD through the Set.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

89 DIGITAL VIDEO RECORDER

7. DVR Menu Setup

DVR Menu Setup allows modification of various system settings to the DVR through CMS as it

would be done on the DVR by accessing it‟s menu.

Select any DVR for Menu setup. Context Menu will appear on screen by Right- clicking.

DVR SETUP Menu pops up, as shown below.

(1) Display

1) Display Setup

a. Status bar: Show or Hide

b. Camera: Select OSD information for

camera

c. Select Border Color or Background

Color.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

90 DIGITAL VIDEO RECORDER

2) Sequential Mode

(2) Camera Setup

ⓐ Select Camera:1~16

ⓑ Select Covert On/OFF

: 0%~99%

ⓓ Enter the camera title: up to 12

characters.

ⓔ Select P/T/Z Camera

a. Sequential Interval: 1~30 sec.

b. Select Sequential Mode

c. Select camera for Full Screen Mode

sequential.

ⓐ ⓑ ⓒ

ⓓ ⓔ

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

91 DIGITAL VIDEO RECORDER

(3) Motion Record Set up

(4) Record Setup

ⓐ Select Enable or Disable to Record.

ⓑ Adjust Picture Quality.

and/or Alarm features On/Off

ⓓ Audio Record On/Off

ⓔ Select Motion Record ON/OFF.

ⓐ ⓑ ⓒ

ⓓ

ⓐ Record Time

: Adjust Post-Event Duration.

ⓑ Camera : Select camera for

Sensitivity (1~20)

ⓓ Motion Grid: Select the desired

motion grids by left click or

delete by right click on the

mouse. It is also possible to

select smaller motion grids for

more precise motion detection.

ⓐ ⓑ ⓒ ⓓ ⓔ

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

92 DIGITAL VIDEO RECORDER

(5) Alarm Record

1) Alarm Record Set up

2) Alarm Record Set up

ⓐ Record Time: Adjust Post-Event Duration.

ⓑ Record Camera : All or 1:1

ⓓ Alarm Out: Configure which relay will be triggered when an alarm is activated per camera.

ⓔ Motion to Alarm : Select “ON” to use Motion detection like Alarm is triggered.

ⓐ ⓑ ⓒ ⓓ ⓔ

ⓐ Select Enable or Disable to Record.

ⓑ Adjust Picture Quality.

and/or Alarm features On/Off

ⓓ Audio Record On/Off

ⓔ Select Alarm Input signal circuit type.

( Normally Close, Normally Open)

ⓐ ⓑ ⓒ

ⓓ

ⓔ

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

93 DIGITAL VIDEO RECORDER

3) Alarm Record Enable

Select the usage of the Alarm Record. Mode 1~4 means for Schedule recording

Mode 1~4

(6) Schedule Setup

Select any Day for Schedule Setup.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

94 DIGITAL VIDEO RECORDER

The detailed Menu pops up for selected Day, as shown below.

Save setup and exit the menu select “OK”, or otherwise exit the menu without making changes select

“Cancel”.

Enter the beginning and end time, and

then select Record Mode to record.

Schedule Menu shows a graphical

representation of the defined record Mode:

Mode 1~4. However, the Schedules are

only displayed if a corresponding schedule

has been configured in the schedule menu

page.

Defined modes as your desired

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

95 DIGITAL VIDEO RECORDER

(7) Network Set up

Select Bandwidth limit or blocking options.

a. Enter e-mail address for alerts from the DVR up to 5 users .

b. Select Mail server and set up SMTP server if you want to use your own mail server.

ⓐ

ⓑ

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

96 DIGITAL VIDEO RECORDER

System Setup

1) General

2) Time

a. System ID : Configure Set ID.

b. Auto Key Lock: ON/OFF

c. Key Tone: Key tone ON/OFF

d. Select overwrite HDD.

e. Camera& Record Fps : Select Max Recording Frame rate.

a. Time Sync. Select Master or slave

clock.

b. Configure Time server

c. Enter the date and time

ⓐ ⓑ ⓒ

ⓓ

ⓔ

ⓐ ⓑ ⓒ

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

97 DIGITAL VIDEO RECORDER

3) Password

Changed the user Password up to 5 users.

4) Control

d. Stop Recording

e. Schedule On/Off

f. Alarm Activated through Network

ⓐ

ⓑ

ⓒ

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

98 DIGITAL VIDEO RECORDER

VIRTUAL DVR

1. What is Virtual DVR.

Virtual DVR is not an actual DVR, but a combination , or group of several DVRs already listed

under the DVR window. Under one Virtual DVR set, up to 64 DVRs can be added, pulling

one camera from each DVR to be displayed. The Virtual DVR behaves in the same way a

DVR would, except for the warning notifications.

2. Virtual Set List Manager

Virtual Set List Manager is used to add or delete Virtual DVR set on CMS.

Click button to start the Set List Manager. Set List Manager Menu pops up, as shown

below.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

99 DIGITAL VIDEO RECORDER

(1) ADD to CMS List

Please follow steps to Make Virtual DVR.

1) NAME: Enter Virtual DVR title to display on CMS window.

* Auto Arrange :

- Check this option to have the CMS arrange cameras with any of the events

occurring from a virtual DVR with registered cameras. The cameras with events

are moved to channel 1 automatically, then arranged in the order of priority.

* Auto Insert& Arrange :

- Check this option to have the CMS to add, prioritize and arrange cameras with

any of the events occurring from any cameras.

* Alarm/ Motion/ Video Loss:

- Check those options to have the cameras with alarm/motion triggers or Video Loss

to be prioritized and arranged automatically in either Auto Arrange or Auto Insert&

Arrange.

2) ADD VIRTUAL DVR: Click “Add Virtual Set” button to make Virtual DVR. Avoid

overlapping same name for Individual Sets.

3) Save changes and exit the menu : Select “OK”

4) Exit the menu without change : Click “Cancel”

 APPLY: It is used for changing the name of selected Virtual DVR.

(2) DEL VIRTUAL DVR: Delete selected virtual DVR from CMS list.

(3) PROPERTY: This menu provides information such as Virtual Set Name, Total number of

connected DVR, Total number of selected Cameras and IP information of connected DVRs.

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

100 DIGITAL VIDEO RECORDER

3. Editing Virtual DVR

(1) Double click the desired Virtual DVR .

(2) The selected Virtual DVR will be activated and it is indicated with “ ▷ “

(3) Select any of Multiscreen to Display.

(4) There are two way to add cameras: one is Whole DVR and the other is selected camera

on each DVR.

1) Whole cameras of desired DVR .

① Click the desired DVR to directly drag the desired channel.

② The camera will be added in numeric order from selected channel to end,

depends on

connected number of cameras on DVR.

In the following exampels, 8ch DVR draged to channel Number 5

CH 5

CH 12

Keepsafe Alarms Ltd

044 93 72168

Parsonstown, Mullingar, Co. Westmeath.

www.keepsafealarms.ie

Pinetron PDR-M1104, PDR-M1008, PDR-M1016 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual