
User Manual
Product Name:Car Bluetooth Handsfree
Model name:NT-267
Brand name:iPDA
FCC ID:2ABMFNT-267
Introduction
* iPDA NT-267 Car Bluetooth Handsfree is with Bluetooth CSR V4.0, A2DP+AVRCP, aptX and ACC codec for high quality music, voice control, hands-free talk, NFC, charging up
to two mobile phones etc., it's small and portable, let you enjoy the high quality music and
hands-free calls during safe driving.
Features
* Simple and fashion.
* Bluetooth CSR V4.0, with apt-X and ACC codec for high quality music.
* Bluetooth A2DP+EDR technology, high fidelity, perfect sound quality.
* Bluetooth AVRCP technology, remote controls music play / pause, next / back and
volume.
* Support voice control and hands-free talk via built-in microphone.
* Sticky mat on the bottom, can be put anywhere for comfortable talking.
* LED backlight, convenient for operation at night.
* Bluetooth transmission range: 10m.
* Built-in NFC simple pairing function.
* Powered by car power source.
* Standard 3.5mm audio output, can be connected to the car's AUX input socket.
* Charging up to two devices at the same time.
Specifications
* Bluetooth CSR V4.0, with apt-X and ACC codec for high quality music.
* Bluetooth A2DP+EDR technology
* Bluetooth AVRCP technology
* Input: 12V DC
* Output of car charger: 5V 2.1A max
* Frequency response: 120Hz-20KHz
* N.W.: 41g
* Dimensions:W45mm x H45mm x D10.8mm
* Cord Length : 80cm
* Accessory: car charger, micro USB charging cable
Compatible with
* Compatible with Bluetooth enabled mobile phones, tablets, notebooks.
Use Means

* Connect NT-267 Car Bluetooth Handsfree and car charger, plug the car charger into the
cigarette lighter in car, plug 3.5mm audio connector into car's AUX input socket.
* Put NT-267 Car Bluetooth Handsfree on the position where is good for hands-free talk
and comfortable control.
* Bluetooth pairing: put the device with NFC close to the logo of NT-267 Car Bluetooth
Handsfree for simple pairing, or use device to search Bluetooth signal of "NT-267".
* Left button: Backward ( hold as volume down).
* Right button: Forward ( hold as volume up).
* Centre button: Play / Pause / Answer call / Hang off / Voice Control ( double click) / Redial ( hold for 2 seconds) / Reset ( hold for 5 seconds).
* Turn off and on, it'll reactivate Bluetooth connection, or you can do the Bluetooth pairing
again.
* After resetting, you must redo the pairing.
* The micro USB port on car charger can either support NT-267 Car Bluetooth Handsfree
or charging mobile phone or tablet with the accessary micro USB cable. The USB port on
car charger can also charge phone or tablet with USB cable, so the car charger can
charge up to two devices at the same time.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.