P.I. Engineering XK-24 User Manual

XK-24 Programmable Keypad

Product Manual

Model XK-24-USB-R
24 Keys
Individual Key Backlighting
Designed in USA by P.I .Engineering
Sold and supported in the USA and UK
USA: www.xkeys.com
UK: www.x-keys-uk.com

Box Contents

This package contains:
1- X-keys XK-24
1- Installation CD
1- Replacement key set (2 tall, 1 wide, 1 key puller)
2- Angled feet
2- Legend Sheets (1 blank, 1 pre-printed)
1- Product Manual

Quick Start for Windows

1. Run the MacroWorks 3 (MW3) installation program from the enclosed disc.

2. Plug in the X-keys and wait for Windows to recognize it.

3. Press the programming switch (located on the top edge of the XK-24) to

open the MW3 programming window (or click on the MW3 taskbar icon and
select the device).

4. Press any key on the X-keys (or double-click on the key image) to begin

recording a macro.

5. Type keystrokes or select text, shortcut, or function. Multiple lines of

keystrokes, text, shortcuts, and functions may be entered on a single key.

6. Press the key again (or click Save) to complete programming.

7. When finished, press the programming switch again to close the

programming window.

To quickly learn how to use MW3 watch the brief tutorials on our website.
Consult the MW3 help file for complete instructions and tips on programming
and using your X-keys.

Mac Users

Install ControllerMate for X-keys from the enclosed disc or visit the Apple page
in the Software section of our website for a free download. ControllerMate for
X-keys is published by OrderedBytes in partnership with P.I. Engineering. For
full programming instructions and support, please visit
www.orderedbytes.com/controllermate/.

Developers

P.I. Engineering offers a free Software Development Kit with code samples in
C#, C++ and .NET. We also offer Linux and Android resources. Please visit
the Developers section on our website: xkeys.com/develop.php.

Support

Should you encounter difficulty with the installation or programming, please
open the MW3 or ControllerMate Help File or check the troubleshooting guide
on our web site. You may also contact technical support.

USA: [e-mail] | Phone: [phone]
UK: [e-mail] | Tel + 44 (0)1869 338428

Compatibility

X-keys USB devices require MacroWorks 3 for Windows XP, Vista, or 7 or
ControllerMate for Mac OS-X. The X-keys XK-24 also has a “Hardware Mode”
to emulate a USB keyboard, mouse, or game controller (joystick) on any USB
enabled operating system (including Linux). Learn more about Hardware
Mode on our web site or contact Technical Support.

Identifying the Keys

Select appropriate icons or use the blank legend sheet to create your own key
legends. The keycaps snap off with a fingernail or small screwdriver. Apply
the label under the keycap, and replace it. The key caps hold a legend 0.575"
wide and 0.5" high (14.6mm x 12.7mm). Other options are available for
printing legends for multiple units. See more information on our website.

Large Keys

The included double-keys replace two single keys on the X-keys. To install a
double key cap, remove two adjacent keys with the provided key-puller. Press
the double-key in place over the two exposed switch stems and configure it in
MW3 using the Large Key Wizard in the Tools menu. Large quad (2x2)
keycaps are also available.

Backlighting

All keys on the XK-24 have two backlighting colors (red and blue) and
advanced programming functions in MW3 allow the user to manipulate them.
By default when MW3 recognizes the XK-24, blue backlighting indicates the
unit is ready for operation or programming. If you program a red layer shift or
toggle key, the backlighting will also indicate the active layer.

Feet

The included angled feet may be snapped in to the bottom of the XK-24 to
give it a slight tilt in either portrait or landscape orientation.