PI Engineering XK-0985-UDP3-R User Manual

X-keys

 3 programmable pedals
 Rear hinged for continuous activation
 Front hinged for momentary activation
 Free programming software for Windows and Mac
 Free software development kits for developers

Operating System

Use: Any OS via USB HID | Programming: Windows XP through 8, Mac OS X 10.4 through 10.8

Free Programming

Software

Windows: MacroWorks 3.1
Mac: ControllerMate for X-keys

Free Software

Development Kits

Windows (C++, C#, VB.NET)
Linux (C++)
Android (Java)
Raw HID (any language/OS)

Emulation Modes

HID keyboard, HID mouse, HID game controller

Switch Type

Microswitch with audible click, guaranteed for over 1 million operations

Number of Pedals

3 programmable pedals

Actuation Force

Approx. 34 – 90 oz (1 - 2.5kg) depending on distance from hinge

Connector

Wired USB 2.0 standard “A” plug

Cord Length

92” (2.3 m)

Dimensions

Approx. 8.1” x 5.5” x 1.6” (21cm x 14cm x 4cm)

Weight

2.5 lb (1.1 kg)

USB type

USB 1.1 (compatible through 3.0)

Power Source

USB port, nominal voltage = 5 VDC

Power Consumption

18 mA @ 5 VDC

Temperature Range

-20 to 60 C

Memory Capacity

Approximately 1000 keystrokes or commands in onboard memory

Memory Type

EEPROM, non volatile memory (X-keys retains memory for over 200 years)

Environmental

Rating

IP 40, typical indoor office environment

Certifications

FCC class B, CE, RoHS, WEEE compliant

®

XK-3 USB Foot Pedal Specifications

for XK-3 Front Hinged and XK-3 Rear Hinged Foot Pedals

The X-keys XK-3 Foot Pedal offers two versions to suit your requirements. The front hinged version allows the
user to rest the ball of their foot on the main pedal and activate the control with slight additional pressure. This
is perfect for mouse click, key press, or other operations where a momentary activation is required. The rear
hinged version allows the user to rest a foot on the pedal keeping the control activated comfortably for long
periods. This is perfect for transcription playback, dictation microphone activation, or video capture.

MacroWorks 3 software for Windows and ControllerMate software for Mac OS-X combine ease of programming
with a wide and flexible range of options. P.I. Engineering’s free SDKs offer direct communication for the
software developer and our new reflector feature sends messages to even the most reluctant software. The XK­3 may also be configured as a standalone USB keyboard with macros programmed in onboard non-volatile
memory.

Specifications

Specifications subject to change without notice

Toll-Free: [phone] | Phone: [phone] | Fax: [phone]

101 Innovation Parkway | Williamston, Michigan 48895-1663

E-mail: [e-mail] | Web: www.xkeys.com

P.I. Engineering, Inc.