Piega SUB 1 MKII User Manual
User Manual
PIEGA P SUB 1 MKII Active Subwoofer
Version 1.0
“Music. That‘s really the only important issue
when it comes to loudspeakers....“
In our view, the superior loudspeaker is the
one that does not interfere. One that adds
no sound of its own. That accurately and
naturally conveys what was played in the
concert or recording studio. Since 1986 we
have been working to perfect this ideal – with
a pioneering spirit, inventiveness and exacting
craftsmanship. You will now be able to hear for
yourself how far we have succeeded.
By purchasing a loudspeaker from PIEGA you
have expressed your trust in our company, for
which we thank you very much. At the same
2
time we assure you that you have purchased a
product that is based on twenty years of R & D,
and which in terms of its design represents the
state of the art. We are sure that you will gain
much listening enjoyment from your new Piega
loudspeaker products.
Although using the loudspeakers is very
straightforward, we recommend that you read
the contents of this user manual carefully. It
will explain how to properly connect up your
new PIEGA loudspeaker products and install
them for optimum results. It also provides you
with some useful information that will increase
your understanding of loudspeakers. But don’t
worry. Even apparently complicated details
are explained very simply. On the last page
of these instructions you will nd our warranty
conditions. Please also read these carefully just
in case.
We wish you an enjoyable read and above all
much listening enjoyment with your new PIEGA
loudspeakers...!
Contents
PIEGA P SUB 1 MKII
This user manual describes how to connect the PIEGA P SUB 1 MKII active subwoofer to different loudspeaker congurations and
the appropriate setting options for optimum operation in stereo and home cinema mode. It also contains instructions for unpacking
and setting up the P SUB 1 MKII.
User Manual
4 Precautions
Before unpacking...
5 Unpacking the P SUB 1 MKII
Instructions for unpacking...
6 Installation Instructions
Recommendations for ideal positioning...
7 Connection Options
Connection terminal for different applications...
8 Connecting the System
Conguration examples for stereo and surround mode*...
13 Setting the Sound Characteristics
Setting options for individual requirements...
14 Daily Use
Care and maintenance...
15 Warranty Conditions
Service and warranty conditions
*Other conguration examples can be obtained from www.piega.ch
3
Precautions
P SUB 1 MKII
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK DO NOT EXPOSE
THIS APPLICATE TO RAIN OR MOISTURE
AVIS:
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
DOUBLE INSULATION WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS
CONFORMS TO
UL STD. 6500
CERTIFIED TO
CAN/CSA STD. E60065
2001310
C
US
PIEGA P SUB 1 MKII
Before unpacking...
Please read this user manual carefully and pay special attention to the following precautions and warnings. In your own interest, we
advise you to strictly observe the following procedure when installing your new PIEGA P SUB 1 MKII.
Warning:
>The PIEGA P SUB 1 MKII subwoofer has been designed
for use with PIEGA loudspeaker products. Nevertheless, the
subwoofer can also be operated with the loudspeakers
of other suppliers
>Ensure particularly that the P SUB 1 MKII is installed
and connected in accordance with the instructions of this
user manual
>The P SUB 1 MKII was only designed for use in dry residential
environments within a temperature range of 10...40°C
4
Unpacking the P SUB 1 MKII
PIEGA P SUB 1 MKII
Special care was taken in the packaging of your P SUB 1 MKII in order to ensure that this new PIEGA quality product reaches your
living room safely and undamaged. In order to avoid any damage when unpacking the loudspeaker, follow closely the instructions
below.
Instructions for unpacking...
Procedure:
>Before unpacking, remove any jewelry such as watches, rings,
bracelets etc. in order to avoid scratching the aluminum
>Open the carton as shown in the gure and remove the supply
cable provided. Leave the protective cushion
>Carefully invert the subwoofer 180° with the carton open
and stand it on the protective cushion so that the carton can be
lifted up and off the loudspeaker
>Remove th protective foil and the upper protective cushion
and turn the subwoofer over 180° once more so that it is standing
on the feet provided
>Check that the P SUB 1 MKII has not been damaged in transit
>Then place the P SUB 1 MKII in the required position
Warning:
The P SUB 1 MKII subwoofer weighs 42 kg and is therefore very heavy.
>To avoid risk of injury only lift the subwoofer together with another person...!
5
Loading...