Page 1
PIEGA User Manual
PIEGA User Manual 28
Page 2
«Music. That‘s really the only important issue
when it comes to loudspeakers...»
In our view, the superior loudspeaker is the one that does not interfere. One that
adds no sound of its own. That accurately and naturally conveys what was played
in the concert or recording studio. Since 1986 we have been working to perfect
this ideal – with a pioneering spirit, inventiveness and exacting craftsmanship. You
will now be able to hear for yourself how far we have succeeded.
By purchasing a loudspeaker from PIEGA you have expressed your trust in our
company, for which we thank you very much. At the same time we assure you
that you have purchased a product that is based on twenty years of R & D, and
which in terms of its design represents the state of the art. We are sure that you
will gain much listening enjoyment from your new Piega loudspeaker products.
Although using the loudspeakers is very straightforward, we recommend that
you read the contents of this user manual carefully. It will explain how to properly
connect up your new PIEGA loudspeaker products and install them for optimum
results. It also provides you with some useful information that will increase your
understanding of loudspeakers. But don’t worry. Even apparently complicated
details are explained very simply. On the last page of these instructions you will
fi nd our warranty conditions. Please also read these carefully just in case.
We wish you an enjoyable read and above all much listening enjoyment with your
new PIEGA loudspeakers...!
PIEGA User Manual
2
User Manual
Page 3
Contents
This user manual describes how to optimally install and connect the PIEGA loudspeakers for a wide range of uses
and contains some useful information on operating, caring for and maintaining your loudspeakers. It also contains
instructions for unpacking and setting up the loudspeakers.
Precautions 4
Unpacking the Loudspeakers 5
Uses 6
Positioning 7
On-Wall Installation 8
Connecting the Loudspeakers 9
Running the Loudspeakers 10
Daily Use 11
Warranty Conditions 12
PIEGA User Manual
3
Page 4
Precautions
Please read this user manual carefully and pay special attention to the following precautions and warnings.
Safety Precautions:
Ensure without fail that your new PIEGA loudspeakers are mounted, positioned and connected exactly
according to these instructions.
PIEGA loudspeakers were only designed for use in
dry residential environments within a temperature
range of 10...40°C.
The high quality loudspeaker chassis of PIEGA loudspeakers contain exceptionally strong magnets with
magnetic fi elds that may impair the operation of
other devices if the loudspeakers are not handled
properly.
CONFORMS TO
UL STD. 6500
CERTIFIED TO
CAN/CSA STD. E60065
Ensure that watches or other metallic objects are not
placed close to the loudspeakers. The strong magnetic fi elds may pull these into the diaphragms and
destroy them.
Keep items such as credit cards, electronic data storage media and similar objects away from the loudspeakers. The magnetic fi eld may cause irrecoverable
loss of data.
Warnung:
Ensure, in particular with children, that hands are not
placed inside the bass tube openings (sharp edges
> risk of injury) and that objects are not inserted into
these openings.
PIEGA User Manual
4
Page 5
Unpacking the Loudspeakers
Special care was taken in the packaging of your new PIEGA quality products in order to ensure that your
loudspeakers reach your living room safely and undamaged. In order to avoid any damage when unpacking
the loudspeakers, follow closely the instructions below without fail.
Procedure:
In order to avoid any damage when unpacking the
loudspeakers or during the installation, you should
always carry out the work with another person.
Before unpacking, remove any jewelry such as
watches, rings, bracelets etc. in order to avoid
scratching the aluminum surface.
Open the carton as shown in the fi gure, remove the
metal brackets on the carton carefully and lift out the
loudspeakers and protective cushions.
Carefully remove the protective cushions and protective wrapping by carefully pulling it up over the
loudspeakers.
Check without fail that the delivery is complete, that
the loudspeaker version supplied corresponds to
your order, and that the loudspeakers have not been
damaged in transit.
If this is the case, follow the instructions on the
remaining pages or otherwise contact the dealer
where you purchased the loudspeakers.
Warning:
PIEGA loudspeakers have cabinets made from
polished aluminum. When unpacking, handle
carefully at all times...!
PIEGA User Manual
5
Page 6
Uses
The PIEGA Loudspeaker Series comprises fl oor-standing, satellite and center loudspeakers. Some series
include all three loudspeaker types. All loudspeakers of the same series are based on the same technology,
either dome tweeter or PIEGA ribbon tweeter. All loudspeakers of the same technology can always be combined and arranged into a cohesive home cinema system and also ideal for stereo systems, sound systems in
bars and restaurants, fi tness centers etc. We recommend….
Multi-channel system
e.g. with TS 5, TS 3 and TS 4 C
Stereo operation
e.g.: with TC 70 X, CL 90 X
Multi-channel system
e.g. with TC 70 X, TP 5, TC 40 CX, PS 1
Room sound system (in bars)
e.g. with TP 4 C, TP 3 and AP 3
PIEGA User Manual
6
Page 7
Positioning
Perfect sound quality depends on the correct positioning and alignment of the loudspeakers. For stereo
operation, the best results are achieved using the stereo triangle layout. In multi-channel systems, the
front, center and rear speakers should be positioned as equidistantly as possible and aligned to the point of
listening.
Stereo operation (Stereo Triangle)
The distances between the loudspeakers
and the point of listening form an isosceles triangle (Ratio 1 : 1.5).
Recommended wall distance approx. 10 - 50 cm,
depending on the model
Note: For best results align the tweeter at ear level.
PIEGA User Manual
7
Page 8
On-Wall Installation
You can use the wall bracket (available as an accessory) to mount the satellite loudspeakers either on the wall
or ceiling and thus use it as a rear or side speaker for both diffused and direct sound. The brackets are also
used when installing the loudspeakers for a room sound system. A special bracket is also available (as an accessory) for mounting the center loudspeakers on walls.
Wall bracket for satellites 1
- Remove the hexagon screws
- Screw in the ball screws of the wall bracket and
lock with nuts
Wall bracket for satellites 3
Wall bracket for satellites 2
41 mm
60 mm
71 mm
- Fix the wall bracket to the position provided for
it using the supplied screws and screw anchors
Wall bracket for center speakers
~ 60-65mm
- Insert the ball screws in the wall bracket
- Align the loudspeaker and tighten the hexagon
screws using the supplied tool
- Do not move the loudspeaker any more
- Fasten the bracket to the wall
- Slightly unscrew the hexagon screws on the loudspeaker
- Fit the center loudspeaker on the wall bracket
- Re-tighten the hexagon screws
Note: For mounting the wall brackets consult a specialist such as your authorized
PIEGA dealer if necessary.
PIEGA User Manual
8
Page 9
Connecting the Loudspeakers
The terminal for single wiring applications is provided at the back of the loudspeaker. This is used for connecting standard loudspeaker cables with banana plugs or with a lead. Ideally, PIEGA loudspeakers should be connected with the OPUS 3 or OPUS 1 loudspeaker cable which is available as an accessory.
Connection:
Ensure that the electronic components are switched
off before making the connection.
PIEGA loudspeakers must only be connected to electronic components with the amplifi er outputs recommended by PIEGA. Observe the specifi cations of the
amplifi er manufacturer. Contact your dealer if you are
unsure whether the connection is permissible.
Pass the wires fully through the opening
Fully insert the banana plugs up to the stop
The loudspeakers have an impedance of 4 Ohms and
can therefore be connected to any standard amplifi er.
Contact your specialist dealer concerning this.
Connect the PIEGA loudspeaker to your amplifi er or
receiver using suitable cables as shown in the fi gure. Ideally, use the OPUS 1 or OPUS 3 loudspeaker
cable (optional) with banana plugs or standard loudspeaker cables with a lead.
Important:
Ensure the poles are connected correctly! A completely diffuse sound with a weak bass will be produced if the plus and minus poles are incorrectly connected.
Active variant:
For PIEGA loudspeakers with the Active module option, please contact your retailer.
PIEGA User Manual
9
Page 10
Running in the Loudspeakers
As a loudspeaker is basically a mechanical transducer consisting of several different components, the individual elements must be run in during the initial weeks. This will ensure that the sound quality potential of your
loudspeakers is fully utilized. You will defi nitely notice the resulting improvement in sound.
Recommendations:
In the fi rst days and weeks listen only at normal
volume.
Avoid very high volume levels during initial phase.
Listen to a wide range of programme material.
Limit range:
The recommended amplifi er output is, depending on
the model, 20 – 250 Watt. It must be ensured that
the volume must only be turned up far enough for
the ear to register an overload.
If the loudspeaker chassis become damaged after a
long period of overload, this can be detected beyond
any doubt by PIEGA service technicians. In these
cases, PIEGA is not liable for any warranty claims.
Note:
Excessively loud music can damage your health.
Listen to music at an acceptable volume level for the
sake of your health.
PIEGA User Manual
10
Page 11
Daily Use
From development to production, right down to quality testing, PIEGA only uses materials and components
of the highest quality. Your new PIEGA loudspeakers are provided with a polished aluminum surface. Although this material is not very sensitive, it should be treated with due care.
Care instructions:
Clean the surfaces of the PIEGA loudspeakers with a
soft, fl uff-free cloth.
If necessary use a soft cloth sprayed with a little mild
window cleaner.
Never use solvents to clean your PIEGA loudspeakers.
Never use abrasive detergents or any agents with
abrasive ingredients.
Warnings:
Do not remove the front cover.
To avoid damage, take great care when children are
close to the loudspeakers.
Attention:
On no account touch the tweeter foil of your loudspeaker.
PIEGA User Manual
11
Page 12
Warranty Conditions
The warranty is limited to six years on our loudspeakers and three years on our electronics in accordance
with the conditions stated below. Read through the service and warranty conditions carefully, especially the
warnings concerning the purchase of PIEGA loudspeakers from unauthorized dealers.
Warranty
1. Every Piega device leaves the factory in perfect condition. If any manufacturing and/or material defects are
found during normal use of the device, we warrant to repair the device with free parts and labor during the
fi rst six years from the date of purchase.
2. The registration card for the device must be sent to Piega within six weeks of purchase, or registered online via the Internet at www.piega.ch/en/service/warranty.htm.
3. The product must be purchased from an authorized Piega dealer.
4. The warranty will not be applicable if any repair is carried out by a person or a workshop that is not authorized to do this by Piega.
5. If it is necessary for a device or part of it to be sent to Piega or an approved Piega workshop, the sender is
responsible for paying all transport costs in advance. The original packaging must be used for sending the
complete device.
6. The warranty will not be applicable if the serial number of the device has been modifi ed, removed or made
illegible. It will also not apply if the device is not connected properly or not treated with due care. The warranty will also not be applicable if the device was modifi ed or repaired in any way that in our view has altered the correct functioning of the device.
7. Piega shall not be liable for the consequences of any damage.
PIEGA Loudspeaker products from unauthorized dealers
The offi cial PIEGA warranty becomes invalid if a PIEGA loudspeaker product was purchased from an unauthorized dealer and is therefore a gray market product, or if the original serial number has been intentionally
removed, replaced or made illegible. Should you have any doubt that the dealer you have selected is an offi cially authorized PIEGA dealer, we recommend that you contact us or the PIEGA sales organization in your
country without fail. Please note the PIEGA sales policy statement at www.piega.ch
PIEGA User Manual
12
Page 13
PIEGA SA
Bahnhofstrasse 29
CH-8810 Horgen
Telephone +41 44 725 90 42
Fax +41 44 725 91 92
mail@piega.ch
www.piega.ch
Information for Exports
PIEGA SA
Bahnhofstrasse 29
CH-8810 Horgen
Telephone +41 44 725 90 02
Fax +41 44 725 91 92
mail@piega.ch
www.piega.ch
Published Summer 2007
Subject to modifi cations, in particular
technical modifi cations and errors
Loading...