PIEGA In-Wall 6.5'', In-Ceiling 6.5'', In-Ceiling 5.25'', In-Wall 5.25'' Piega_In-wall_In-ceiling_2017_En (1).pdf

PIEGA Loudspeaker Series

Discrete sound systems for living areas and offices.

PIEGA Loudspeaker Series

For rooms in which there is no room for conventional loud-

speakers, the Swiss acoustics specialist PIEGA is presenting

a series of ceiling and wall flush-mounted loudspeakers for

the first time. These use the cavities of a suspended ceiling or

openings provided on the building side in the wall as “enclo-

sure volume”, close almost flush with the installation surface

and are therefore often almost invisible after installation. If nec-

essary, plastic cabinets which are to be fixed at the rear are

available as accessories.

The two new PIEGA flush-mounted loudspeakers In-ceiling

5.25“ and In-ceiling 6.5“ are designed as coaxial systems.

Their low mid-range loudspeakers have a diameter of 130

and 165 mm. The 26 mm LDS dome tweeters are mounted

in front of the cone diaphragms on a bridge, as a result of

which the systems only need small installation openings and

can be integrated with very little space.

The two PIEGA In-wall 5.25“ and In-wall 6.5“ loudspeakers

have a rectangular format and a conventional two-way fitting.

Here too, a 130 or 165 mm MDS low mid-range loudspeaker

in conjunction with the 26 mm LDS dome tweeter provides an

amazingly voluminous and fine-resolution sound pattern. The

in-wall models are particularly suitable for a stereo arrange-

ment and/or a central speaker, as well as the rear surround

channels of a home cinema system.

In-wall 6.5“

In-ceiling 6.5“

On a baffle which is only slightly larger than the PIEGA In-wall

5.25”, the larger in-wall system cabinets not only the LDS

tweeter, but also a 165 mm mid-range loudspeaker which

also promises a voluminous and powerful sound even in larger

rooms. When used in a home cinema system, the use of an

additional subwoofer is not recommended.

In-wall 5.25“

The baffle of the smaller PIEGA in-wall loudspeaker cor-

responds exactly to the DIN A4 format. With its particularly

small installation depth of only 77 mm, the system – which is

equipped with a 130 mm low mid-range loudspeaker and 26

mm LDS tweeter dome – can be used almost everywhere.

It is particularly recommended for stereo and home cinema

systems in small to medium-sized rooms.

Larger rooms have not only more volume, they also require

larger loudspeakers in order to provide sufficient sound. The

PIEGA In-ceiling 6.5” flush-mounted ceiling loudspeaker is

therefore the first choice when it comes to the discrete pro-

duction of sound for sizeable areas. A 165 mm low mid-range

loudspeaker ensures a solid bass foundation and homogene-

ous mid-range sounds, with PIEGA’s own LDS dome rounding

off the sound characteristics upwards. And even the large ceil-

ing loudspeaker only requires an installation depth of 94 mm.

In-ceiling 5.25“

Whether in the bathroom or hallway, for the overhead chan-

nels in the Dolby Atmos home cinema, in the meeting room

or office, in the lawyer’s chambers or doctor’s surgery – the

PIEGA In-ceiling 5.25” is the universal loudspeaker for all ap-

plications where the best possible sound quality in conjunction

with small dimensions is required. With an installation depth

of only 85 mm and a cover with a diameter of 204 mm, the

130 mm two-way coaxial system can be installed without any

problems.

Technical Data

In-wall

In-ceiling

Model In-wall 6.5“ In-wall 5.25“ In-ceiling 6.5“ In-ceiling 5.25“

Construction
principle

Recommended
amplifier power

Sensitivity

Impedance

Frequency response

Equipment

Dimensions
(HxWxD)

Weight

Versions

2-way system Flush­mounted loudspeaker

45 – 90 watt 30 – 60 watt 45 – 90 watt 30 – 60 watt

87 db/W/m 87 db/W/m 87 db/W/m 87 db/W/m

8 ohms 8 ohms 8 ohms 8 ohms

65 Hz – 20 kHz 78 Hz – 20 kHz 68 Hz – 20 kHz 80 Hz – 20 kHz

1 x 165 mm MDS
1 x 26 mm LDS dome

306 x 21,9 x 8,1 cm 29,9 x 21,3 x 7,7 cm 23,3 ø x 9,4 cm 20,4 ø x 8,5 cm

1,7 kg 1,7 kg 1,6 kg 1,5 kg

Speaker cover white
(rear plastic cabinet
black)

2-way system Flush­mounted loudspeaker

1 x 130 mm MDS
1 x 26 mm LDS dome

Speaker cover white
(rear plastic cabinet
black)

2-way system Flush­mounted loudspeaker

1 x 165 mm MDS
1 x 26 mm LDS dome

Speaker cover white
(rear plastic cabinet
black)

2-way system Flush­mounted loudspeaker

1 x 130 mm MDS
1 x 26 mm LDS dome

Speaker cover white
(rear plastic cabinet
black)

Service

PIEGA offers first-class service and six

years warranty on all loudspeakers,

as well as three years on the electronics.

PIEGA SA

Bahnhofstrasse 29

CH-8810 Horgen

Telephone [phone]

Fax [phone]

[e-mail]

www.piega.ch

Information for Exports

Telephone [phone]

Published January 2017

Subject to modifications, in particular

technical modifications and errors.