PIEGA Ace 50 wireless TX black, Ace 30 wireless TX silver, Ace Center wireless RX white, Ace 50 wireless RX silver, Ace 30 wireless RX silver User-Manual-Ace_Wireless-ENG_FINAL.pdf

USER

GUIDE

ACE WIRELESS SERIES

BY PIEGA

EXPECT MORE

OPERATING INSTRUCTIONS

Ace Wireless by PIEGA

CONTENTS

1 CONTENTS . ......................................................3

2 IMPORTANT SAFETY INSTRUCTIONS ..............4

3 THE ACE SPEAKERS AT A GLANCE .................5

3.1 Integrated Streaming Clients & WiSA Module ....... 6

3.1.1 Spotify connect ......................................... 6

3.1.2 Google Chromecast built-in ....................... 6

3.1.3 ROON Ready ........................................... 6

4 OPERATING ELEMENTS OF THE SPEAKERS ....7

4.1 THE ACE Tx ....................................................... 7

4.2 THE ACE Rx ...................................................... 8

5 CHOOSE YOUR FAVOURITE SETUP ..................9

5.1 MINI-SETUP . .................................................... 10

5.1.1 How to install your Mini-Setup .................. 10

5.2 WIRED TV INTEGRATION .................................. 11

5.2.1 How to set up wired TV integration ........... 12

5.3 WiSA WIRELESS TV INTEGRATION AND

HOME CINEMA ............................................... 13

5.3.1 How to create your wireless home cinema 13

5.4 INSTALLATION FOR HIFI-ENTHUSIASTS ........... 14

5.4.1 How to set up a high end installation ........ 14

6 CONNECT TO LOCAL NETWORK (WIFI) .........15

6.1 GOOGLE HOME APP ...................................... 15

6.2 DIRECT WIRELESS ACCESS ............................ 16

6.3 DIRECT ACCESS VIA ETHERNET CABLE ......... 16

7 ANTENNA AND NETWORK CONNECTION ......17

7.1 INTERNAL ANTENNA ....................................... 17

7.2 ETHERNET CONNECTION ............................... 17

7.3 EXTERNAL WIFI ANTENNA . .............................. 17

8 WIRELESS SURROUND SOUND WITH WiSA ...18

8.1 PAIR YOUR ACE WIRELESS ............................. 18

8.2 WIRELESS CONNECTION TO WiSA DEVICES .. 18

9 CONFIGURATION ............................................19

9.1 STEREO CONFIGURATION .............................. 19

9.2 «SOUND» SWITCH .......................................... 19

9.3 WIRELESS ON/OFF ......................................... 20

9.3.1 WiFi functions Ace Tx . ............................. 20

9.3.2 WiFi functions Ace Rx ............................. 20

9.4 VOLUME CONTROL BY REMOTE . ................... 21

9.5 WEB INTERFACE ... .......................................... 22

10 TV CONNECTIVITY OPTIONS .......................23

10.1 WiSA WIRELESS ............................................ 23

10.2 HDMI (e)ARC ................................................. 23

10.3 FURTHER CONNECTIVITY .............................. 24

11 BLUETOOTH CONNECTION .........................25

11.1 BLUETOOTH PAIRING MODE ........................ 25

12 AUTOMATIC INPUT SOURCE SELECTION . ...25

13 PIEGA WIRELESS SYSTEM ..........................26

14 RESET ..........................................................27

15 FIRMWARE-UPDATE ....................................28

15.1 UPDATE YOUR Rx ......................................... 28

15.2 UPDATE YOUR Tx . ......................................... 28

15.2.1 Webinterface update ............................. 28

15.2.2 Memorystick update ............................. 28

16 SETUP INTERFACE FOR AUDIOPHILES .......29

17 LED INDICATORS AT A GLANCE ..................31

18 TECHNICAL DATA ........................................32

19 DECLARATION OF CONFORMITY .................33

User Guide Ace Wireless // 3

2 IMPORTANT SAFETY INSTRUCTIONS

1. Retain this user guide for future reference.

2. Read all safety instructions carefully.

3. Heed all warnings.

4. Follow all instructions and recommendations.

5. Do not use this apparatus near water.

6. Clean only with dry and soft cloth.

7. Do not install near any heat sources such as radiators, heat registers, stoves or other devices thatproduce heat.

8. Protect the power cord from being stepped on or pinched, particularly at plugs, convenience receptacles and at the point they exit
from the apparatus.

9. Only use accessories or attachments approved by the manufacturer.

10. Do not defeat the safety purpose of the polarised plug. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.

11. Unplug this apparatus during thunderstorms or when unused for long periods of time.

12. Refer all servicing to qualied personnel. Servicing is required if the apparatus has been damaged in any way, e.g. the power
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus. Equality if it has been exposed to
rain or moisture, does not operate normally, or has been dropped.

13. The power plug should be easily accessible to disconnect the equipment at any time.

14. Warning: To reduce the risk of re and electric shock, do not expose this apparatus to rain or moisture.

15. Do not expose the apparatus to dripping or splashing and do not place objects lled with liquids, such as vases and glasses on
the apparatus.

16. Maintain 150 mm safety clearance all around the apparatus to ensure adequate ventilation.

17. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

18. Do not place objects with naked ames, such as lit candles on the apparatus.

19. This apparatus is approved for indoor use only.

User Guide Ace Wireless // 4

3 THE ACE SPEAKERS AT A GLANCE

The Ace Wireless series includes the following speakers:

Ace 50 Wireless Ace 30 Wireless Ace Center Wireless

(Models: Tx / Rx) (Models: Tx / Rx) (Models: Rx)

Scope of delivery

The scope of delivery includes:

speaker power cable infrared interface (Tx)external antenna with stand

User Guide Ace Wireless // 5

and cable (Tx)

3.1 INTEGRATED STREAMING CLIENTS & WISA MODULE

The Ace Wireless speakers (Tx model) come with the following integrated streaming clients: Google Chromecast,
Spotify Connect, Roon Ready. In addition, they have been equipped with a WiSA module, which allows you
to connect them wirelessly to any WiSA supporting TV.

3.1.1 SPOTIFY CONNECT

Spotify connect allows you to play your music directly from the
Spotify app on your Ace Wireless speakers.

The Spotify software is subject to third party licenses
found here:

https://www.spotify.com/connect/third-party-licenses.

Use your phone, tablet or computer as a remote control
for Spotify. Go to spotify.com/connect to learn how.

3.1.2 GOOGLE CHROMECAST BUILT-IN

Google Chromecast supports various music platforms and
radio stations. With Google Chromecast, you can easily
play music from your mobile device on your Ace speakers.

Chromecast built-in is a trademark of Google LLC.

3.1.3 ROON READY

Roon Ready network devices have Roon’s streaming technology
built in, and are certied by Roon Labs to provide the highest level
of quality and performance in network streaming.

https://roonlabs.com/

User Guide Ace Wireless // 6

4 OPERATING ELEMENTS OF THE ACE SPEAKERS

4.1 THE ACE TX

Tx stands for «Transmitting Unit», meaning the Tx speaker transmits data to other (Rx) speakers.
For this purpose, the Tx has been equipped with a number of wired inputs and streaming protocols.

THE TX CONNECTION PANEL AND ITS FUNCTIONS:

Ace

SERVICE

NETWORK

AUX/OPT

COAX

REMOTE

HDMI eARC

Tx

SELECT

PAI R

LEFT

MONO

RIGHT

PAI R

WIFI

SOUND

NEUTRAL
WAL L
SUB

WIRELESS

ON
OFF

RESET

WIFI

SERVICE USB port for rmware updates.

NETWORK Ethernet port for stable and fast connections to a local

network.

AUX/OPT Analog stereo input 3.5mm jack OR digital optical input

S/PDIF.

COAX Digital coaxial input S/PDIF.

REMOTE Connects the enclosed infrared receiver to tune your

remote.

HDMI eARC HDMI input to connect a TV.

LEFT/MONO/RIGHT

Indicates the channel selected: left / mono / right.

Indicators

PAIR

Indicates the connection status to the Rx speaker.

Indicator

WIFI

Indicates the connection status to the local WiFi.

Indicator

SELECT Press this button to select the desired channel:

left / mono / right.

PAIR Press this button to pair with an Rx speaker.

SOUND Flip this switch to choose a tting sound setting (Presets).

WIRELESS Flip this switch to activate or deactivate WiFi functions.

RESET Use this to reset the apparatus to factory settings.

WIFI Connects the enclosed external antenna for improved

internet connectivity.

User Guide Ace Wireless // 7

PAI R

LEFT

MONO

RIGHT

PAI R

WIFI

SELECT

WIFI

NETWORK

AUX/OPT

COAX

REMOTE

Ace

Tx

SOUND

NEUTRAL
WAL L
SUB

WIRELESS

ON
OFF

HDMI eARC

SERVICE

RESET

4.2 THE ACE RX

Rx stands for «Receiving Unit», meaning an Rx speaker can receive wireless signals from any WiSA transmitter (Tx).
Besides being combined with a Tx, the Ace Rx can thus also be used to create a wireless (WiSA) home cinema setup.

THE RX CONNECTION PANEL AND ITS FUNCTIONS:

Ace

SERVICE

AUDIO OUT

AUDIO IN

ANALOG IN

Rx

SELECT

PAI R

LEFT

MONO

RIGHT

PAI R

SOUND

NEUTRAL
WAL L
SUB

WIRELESS

ON
OFF

RESET

SERVICE USB port for rmware updates.

AUDIO OUT Analog stereo balance output. Produces the «AUDIO IN»

signal. Suitable for installations with multiple speakers.

AUDIO IN Analog stereo balance input. Suitable for installations with

long signal paths.

ANALOG IN Analog mono input.

LEFT/MONO/RIGHT
Indicators

PAIR
Indicator

SELECT Press this button to select the desired channel:

Indicates the channel selected: left / mono / right.

Indicates the connection status to the Tx speaker or
WiSA transmitter.

left / mono / right.

PAIR Press this button to pair with a Tx speaker or WiSA

transmitter.

SOUND Flip this switch to choose a tting sound setting (Presets).

WIRELESS Flip this switch to activate or deactivate WiFi functions.

RESET Use this to reset the apparatus to factory settings.

User Guide Ace Wireless // 8

5 CHOOSE YOUR FAVOURITE SETUP

LEFT

LEFT
SURROUND

BACK
SURROUND
LEFT

RIGHT

SURROUND

BACK

SURROUND

RIGHT

RIGHT

SUBWOOFER

CENTER

YOU

The Ace wireless speakers can be connected and positioned to suit your personal sound preferences. In this section you will
nd an overview of different setup options including links to detailed information if you wish to take a closer look at one specic
setup.

MINI-SETUP

WISA WIRELESS TV INTEGRATION

AND HOME CINEMA

GO TO

PAGE 10

GO TO

PAGE 13

WIRED TV INTEGRATION

INSTALLATION FOR

HIFI-ENTHUSIASTS

CAT CABLE
L&R CHANNEL

LEFT RIGHT

GO TO

PAGE 11

GO TO

PAGE 14

User Guide Ace Wireless // 9

5.1 MINI-SETUP

This ultra-lean all-in-one mini setup requires just two devices:

· one Tx speaker

· one Rx speaker

These two PIEGA Ace speakers are installed in no time and ready to play your favourite tunes conveniently controlled from any smart
device.

5.1.1 HOW TO INSTALL YOUR MINI-SETUP

1. Position your speakers in the desired location.

2. Power your speakers.

3. Check the settings on each speaker. If you wish to connect to your local WiFi, both «WIRELESS» switches need to be

«ON». Learn more about the WiFi functions: WIRELESS ON/OFF

4. Ensure power is connected for at least 1 minute, then start establishing the connection to the local WiFi:

See CONNECT TO LOCAL NETWORK (WIFI)

5. The two speakers can now be connected: See PAIR YOUR ACE WIRELESS

6. Once the connection has been established press «SELECT» and set to «LEFT», «MONO» or «RIGHT» according to the speaker

positioning: See STEREO CONFIGURATION

7. Use the «SOUND» switch to adjust the sound settings. This selection mainly affects the bass reproduction.

Learn more: «SOUND» SWITCH

User Guide Ace Wireless // 10

5.2 WIRED TV INTEGRATION

If you opt for wired TV integration you will need the following devices:

· Tx and Rx speakers

· a TV

· optional: external devices such as CD and record players etc.

In this setup the sound of your TV or other external devices is played through your Ace speakers.

User Guide Ace Wireless // 11

5.2.1 HOW TO SET UP WIRED TV INTEGRATION

a) Basic setup

1. Position your speakers in the desired location.

2. Power your speakers.

3. Check the settings on each speaker. If you wish to establish a connection to the local WiFi, both «WIRELESS» switches need to be

«ON». Learn more about the WiFi functions: WIRELESS ON/OFF

4. Ensure power is connected for at least 1 minute, then start establishing the connection to the local WiFi:

see CONNECT TO LOCAL NETWORK (WIFI)

5. Once the speakers appear on the local WiFi you can connect them with each other: see PAIR YOUR ACE WIRELESS

6. Then press «SELECT» and set to «LEFT», «MONO» or «RIGHT» according to the speaker positioning:

see STEREO CONFIGURATION

7. Use the «SOUND» switch to adjust the sound settings. This selection mainly affects the bass reproduction.

See: «SOUND» SWITCH

b) TV connection using HDMI eARC

1. Use an HDMI cable to connect the HDMI ARC output on your TV with the «HDMI eARC» input on your Tx.

Learn more: HDMI (e)ARC

c) TV connection using an optical connector

1. Nearly every TV comes with an optical output marked with «optical output».

2. Use any commercially available optical cable and connect this output with the «AUX/OPT»

input on your Tx. An adapter for the «AUX/OPT» input has been included in the scope of
delivery. Learn more about all connection options: FURTHER CONNECTIVITY

Now simply use your TV remote to conveniently control the volume of your Ace speakers.
Learn more: VOLUME CONTROL BY REMOTE

d) Connect external devices

The «AUX/OPT» or «COAX» input jack allows you to easily connect additional external sources such
as CD or record players and conveniently adjust the volume with your TV remote.

User Guide Ace Wireless // 12

5.3 WISA WIRELESS TV INTEGRATION AND HOME CINEMA

LEFT

LEFT
SURROUND

BACK
SURROUND
LEFT

RIGHT

SURROUND

BACK

SURROUND

RIGHT

RIGHT

SUBWOOFER

CENTER

YOU

To create your personal home cinema setup with WiSA wireless TV integration you will need the
following devices:

· Rx speakers ONLY

· TV with integrated WiSA interface OR external WiSA transmitter, that can be connected

with your TV

WiSA allows you to establish a wireless connection between your TV and your Ace speakers. Now choose any setup from
stereo to 7.1 surround sound. If your TV doesn’t support WiSA, you can choose to connect any external WiSA transmitter.

5.3.1 HOW TO CREATE YOUR WIRELESS HOME CINEMA

1. Position your speakers in the desired location.

2. Power your speakers.

3. Make sure the «WIRELESS» switch is «ON» on all Rx speakers. Learn more about the WiFi functions:

see WIRELESS ON/OFF

4. Now follow the operating instructions of your TV or WiSA transmitter.

5. Press «PAIR» on your Rx if your WiSA device doesn’t recognise the speakers instantly.

Learn more here: PAIR YOUR ACE WIRELESS

6. Once the connection to the TV or WiSA transmitter has been established use the «SOUND» switch to adjust the sound

settings. This selection mainly affects the bass reproduction. Learn more: «SOUND» SWITCH

User Guide Ace Wireless // 13

5.4 INSTALLATION FOR HIFI-ENTHUSIASTS

CAT CABLE
L&R CHANNEL

LEFT RIGHT

This expert setup reliably connects one or several speakers even via long signal lines. You will need
the following devices:

· Rx speakers ONLY

· playback devices such as network players or preampliers with balanced output

The Ace Rx is equipped with a balanced analog input (stereo). Simply use a standard CAT network
cable to connect the balanced stereo signal to your speaker.

5.4.1 HOW TO SET UP A HIGH END INSTALLATION

1. Position your speakers in the desired location.

2. Use a shielded CAT cable with RJ45 connector to connect the stereo analog audio signal

with your speakers. Learn more about the pin assignment here: FURTHER CONNECTIVITY

3. Now power your speakers.

4. Make sure the «WIRELESS» switch is «OFF». Learn more about the different wireless

functions: WIRELESS ON/OFF

5. Use the «SOUND» switch to adjust the sound settings. This selection mainly affects the

bass reproduction. Learn more: «SOUND» SWITCH

User Guide Ace Wireless // 14

6 CONNECT TO LOCAL NETWORK (WIFI)

Bear in mind, that out of the Ace Series only the Tx speaker needs a connection to the local
network, the Rx doesn’t need a network connection. The following sections thus ONLY apply to
the Tx model.

6.1 GOOGLE HOME APP

Google Home offers a simple way of integrating your speakers into your local network and
operating them easily:

1. Download the Google Home app on your smart device.

2. Power your speakers.

IMPORTANT: Ensure power is connected for at least 1 minute for Google Home to detect
your speakers.

3. Open the Google Home app on your smart device.

4. A message should pop-up allowing you to select your PIEGA speaker. Alternatively, you

can add a new device by pressing «+» in the upper area of the screen.

5. Follow the instructions on the app to complete the installation.

Note: If the setup with Google Home fails, we recommend using the «Reset» function on the rear
panel of your Ace speaker (see RESET). Restarting your smart device might also help.

An unstable WiFi connection can also affect this process. Find out how to improve the connection
stability: ANTENNA AND NETWORK CONNECTION

User Guide Ace Wireless // 15

6.2 DIRECT WIRELESS ACCESS

By factory default or after performing a reset (see RESET), the speakers can be connected directly to
your computer.

1. Power your speaker and wait for at least 1 minute until the WiFi indicator starts a slow green ash.

2. Open the WiFi settings on your laptop, computer or smart device and select your Ace speaker from the
list of available networks. If the Ace speaker is not yet listed, press «SELECT» for 10 seconds.

3. Click on «Properties» to copy the IPv4 DNS address.

4. Paste the IPv4 DNS address in your browser window. You can now access your Ace speaker via web
interface and start conguring your network preferences.

6.3 DIRECT ACCESS VIA ETHERNET CABLE

Alternatively, you can also access the same web interface via Ethernet.

1. Power your speaker and wait for at least 1 minute until the WiFi indicator starts a slow
green ash.

2. Use a network cable to connect your speaker to your wireless router.

3. Your Ace speaker is now listed under «Network» on your computer.

4. Double click on the Ace symbol to open the web interface and choose
your network settings.

User Guide Ace Wireless // 16

7 ANTENNA AND NETWORK CONNECTION

7.1 INTERNAL ANTENNA

The Ace Tx speakers come with a built-in WLAN antenna, so they typically don’t need further external antennas or an additional network
connection. However, if you’re repeatedly experiencing connectivity issues you may want to connect an external antenna or opt for an
Ethernet connection.

7.2 ETHERNET CONNECTION

An Ethernet connection provides the best and most stable
network connection. Simply use a network cable to connect your
internet router to your Ace speaker.

To avoid possible interferences, we recommend an unshielded
twisted pair cable.

7.3 EXTERNAL WIFI ANTENNA

If the built-in WiFi antenna doesn’t provide the desired stability
you can improve the connectivity by attaching the enclosed
external antenna.

Note: This antenna only stabilises the internet connection, not
the connection between the Tx and Rx speakers.

Tip: You can use your smartphone to check the WiFi quality
at the chosen position. If it is poor, we recommend placing the
speaker near a router while setting it up.

Ace

SERVICE

NETWORK

AUX/OPT

COAX

REMOTE

HDMI eARC

Tx

SELECT

PAI R

LEFT

MONO

RIGHT

PAI R

WIFI

SOUND

NEUTRAL
WAL L
SUB

WIRELESS

ON
OFF

RESET

WIFI

User Guide Ace Wireless // 17

8 WIRELESS SURROUND SOUND WITH WiSA

WiSA certied devices enable wireless, hi-res multichannel audio signal transmission for a fantastic
home cinema soundscape.

8.1 PAIR YOUR ACE WIRELESS

Ace

SERVICE

Rx

LEFT

MONO

RIGHT

PAI R

Establishing a wireless connection between your PIEGA
speakers is super easy. Simply press «PAIR» on both
speakers until the «PAIR» indicator starts ashing. An acous­tic signal on the Rx indicates the start of the pairing process,
the ashing indicator changes to a steady green upon
successful pairing.

Ace

SERVICE

Tx

LEFT

MONO

RIGHT

PAI R

WIFI

8.2 WIRELESS CONNECTION

TO WISA DEVICES

AUDIO OUT

SELECT

NETWORK

SELECT

For your WiSA device (TV, network player, etc.) to recognise
your Ace Rx you need to press «PAIR» on the rear panel.
The «PAIR» indicator starts ashing and an acoustic signal
conrms the start of the pairing process.

Now follow the operating instructions of your WiSA device.

AUDIO IN

ANALOG IN

PAI R

SOUND

NEUTRAL
WAL L
SUB

WIRELESS

ON
OFF

AUX/OPT

COAX

REMOTE

HDMI eARC

PAI R

SOUND

NEUTRAL
WAL L
SUB

WIRELESS

ON
OFF

RESETRESET

WIFI

User Guide Ace Wireless // 18

9 CONFIGURATION

LEFT Speaker

RIGHT Speaker

Distance from Wall

in excess of 0.5m

LEFT Speaker

RIGHT Speaker

Distance from Wall

less then 0.5m

9.1 STEREO CONFIGURATION

A music signal consists of a right and a left channel. Use the «SELECT» button to congure your speakers accordingly:

• LEFT: for the speaker positioned on the left

• RIGHT: for the speaker positioned on the right

• MONO: for a single speaker

9.2 «SOUND» SWITCH

The speakers position in a room impacts the music playback.
Choose the correct setting for the best possible sound experience:

If you are using your Ace speakers in combination
with a subwoofer, choose the following setting:

NEUTRAL: Flip the switch to «NEUTRAL» for speakers
placed at least 50 cm from the wall.

SUB: In this position a high pass lter cuts the bass.
You can also use «SUB» if you generally prefer less bass.

WALL: Flip the switch to «WALL» for speakers positioned less
than 50 cm from the wall. In this setting bass tones below 100 Hz
are reduced.

User Guide Ace Wireless // 19

9.3 WIRELESS ON/OFF

This switch can be used to control the wireless modules as well as a number of other functions:

9.3.1 WIFI FUNCTIONS ACE TX

Function Wireless OFF Wireless ON

Streaming Clients

· Google Chromecast

· Spotify Connect

· Roon Ready

· Bluetooth

WiSA
Wireless connection to
Rx speaker

OFF No internet connection ON

ON

OFF in standby mode, starting up
will take longer

ON

HDMI ON

OFF in standby mode
Starting up not possible via HDMI

Infrared remote ON ON

Analog and digital S/
PDIF inputs

ON ON

ON

9.3.2 WIFI FUNCTIONS ACE RX

Function Wireless OFF Wireless ON

WiSA connection OFF ONOFF ON

Analog input RCA &
RJ45

User Guide Ace Wireless // 20

ON ON

9.4 VOLUME CONTROL BY REMOTE

Any infrared remote can be used to simply and conveniently control the following functions on your
Ace speakers:

· volume adjustment

· mute

To set this up you will need the external infrared receiver included in the scope of delivery.



Ace

SERVICE

NETWORK

AUX/OPT

COAX

REMOTE

HDMI eARC

Tx

SELECT

PAI R

LEFT

MONO

RIGHT

PAI R

WIFI

SOUND

NEUTRAL
WALL
SUB

WIRELESS

ON
OFF

RESET

WIFI

SIMPLY FOLLOW THESE STEPS:

1. Connect the external IR receiver to the «REMOTE» jack.

2. Simultaneously press «PAIR» and «SELECT» until the indicators «LEFT»,
«MONO» and «RIGHT» go off (approx. 5 seconds).

3. Release both «PAIR» and «SELECT».

4. All indicators «LEFT», «MONO» and «RIGHT» start ashing.

5. Press «SELECT», until the indicator «LEFT» starts ashing.

6. Now press the volume control «+» on your remote twice.

7. «LEFT» now lights up permanently.

8. Press «SELECT» until the indicator «RIGHT» starts ashing.

9. Now press the volume control «-» on your remote twice.

10. «RIGHT» now lights up permanently.

11. Press «SELECT» until «MONO» starts ashing.

12. Now press «mute» on your remote twice.

13. «MONO» lights up permanently.

14. After 5 seconds all indicators light up.

15. Your remote has been successfully tuned.

YOU CAN EASILY SKIP INDIVIDUAL STEPS BY PRESSING THE
«SELECT» BUTTON AGAIN.

The volume is automatically reduced after this process but can be set back to
100% with your remote control.

Note: Your TV remote or any IR remote can also be used with external devices

such as CD and record players.

User Guide Ace Wireless // 21

10 TV CONNECTIVITY OPTIONS

10.1 WISA WIRELESS

Some TV’s have built-in WiSA interfaces that allow setting up a wireless connection between your TV and your Ace speakers without
any additional devices. If this is the setup of your choice, we recommend purchasing a minimum of two Rx speakers, then follow the
operating instructions of your TV.

10.2 HDMI (e)ARC

If your TV has an HDMI (e)ARC output you can easily and conveniently connect your speakers by connecting your TV to the «HDMI eARC»
input on your Ace Tx.

Ace

Tx

LEFT

SERVICE

NETWORK

HDMI 1

HDMI 2

HDMI 3 (ARC)

AUX/OPT

COAX

REMOTE

HDMI eARC

MONO

RIGHT

PAIR

WIFI

SELECT

PAIR

SOUND

NEUTR
WALL
SUB

WIRELESS

ON
OFF

WIFI

Double-check the settings on your TV to make sure the sound is played back through the HDMI ARC output.

Note: The Ace Tx only support stereo signals. For multi-channel (home cinema) playback, an appropriate external WiSA transmitter must
be used.

User Guide Ace Wireless // 22

10.3 FURTHER CONNECTIVITY

You can also transmit the TV audio signal digitally to your Ace speakers using an optical or coaxial cable. Or simply: analog.

Ace

SERVICE

Tx

LEFT

MONO

RIGHT

PAI R

WIFI

Note: For both options use the «AUX/OPT» jack on the rear panel. A corresponding adapter for the
optical connection is included in the scope of delivery.

These TV outputs often miss the volume information. We therefore recommend to connect the enclosed
external IR receiver («REMOTE») and tune your TV remote in order to control the volume.
Learn more: VOLUME CONTROL BY REMOTE

NETWORK

SELECT

AUX/OPT

COAX

REMOTE

HDMI eARC

User Guide Ace Wireless // 23

PAI R

SOUND

NEUTRAL
WAL L
SUB

WIRELESS

ON
OFF

RESET

WIFI

11 BLUETOOTH CONNECTION

The built-in Bluetooth function is not protected, meaning that anyone can pair with your Ace speakers at any time using a Bluetooth-enabled
device. If you wish to eliminate unwanted Bluetooth connections, you can protect the Bluetooth pairing mode and prevent your Ace speakers
from automatically being detected by any Bluetooth-enabled device. You will then have to push «PAIR» before establishing a connection to your
speakers.

11.1 BLUETOOTH PAIRING MODE

To switch between protected and unprotected Bluetooth pairing mode press «SELECT» and «PAIR» for more than 20 seconds.

Note: After approx. 5 seconds the indicators will go off, simply keep pressing until they’ll light up again. Upon successfully switching the pairing
mode all indicators «LEFT», «MONO» and «RIGHT» will light up 3 times. You can switch between the two pairing modes at any time.

12 AUTOMATIC INPUT SOURCE SELECTION

The Ace Tx automatically selects its input source, following a predened prioritisation:

Input source Priority

Streaming Clients

· Google Chromecast

· Spotify Connect

· Roon Ready

· Bluetooth

HDMI eARC 2

1*

Digital Coax 3

Analog (AUX) 4

Digital optical (OPT) 5

The input source with the higher priority is selected, sources with lower priority are suppressed. If the active source stops, the Tx
automatically switches to a lower priority source after approx. 10 seconds.

*The highest priority lists multiple streaming clients but will always play the last one applied.

Eg.: 1. Music is played through Spotify Connect

2. A new stream is being started through Google Chromecast

3. Google Chromecast overrides and stops the Spotifystream

User Guide Ace Wireless // 24

13 PIEGA WIRELESS SYSTEM

Besides audio signal transmission, the wireless connection between the Ace Tx and Ace Rx also enables communication with other
products of the Ace series or a PIEGA wireless subwoofer. Therefore, the appropriate lters will be set automatically if connected with a
PIEGA wireless subwoofer:

· High-pass lter for the Ace speakers

· Low-pass lter for the subwoofer

Volume and phasing can still be adjusted from the subwoofer. For further tips and information consult the PIEGA wireless subwoofer user
guide.

User Guide Ace Wireless // 25

14 RESET

Ace

SERVICE

AUDIO OUT

Rx

LEFT

MONO

RIGHT

PAI R

SELECT

Ace

SERVICE

NETWORK

Tx

SELECT

LEFT

MONO

RIGHT

PAI R

WIFI

AUDIO IN

ANALOG IN

PAI R

SOUND

NEUTRAL
WALL
SUB

WIRELESS

ON
OFF

AUX/OPT

COAX

REMOTE

HDMI eARC

PAI R

SOUND

NEUTRAL
WALL
SUB

WIRELESS

ON
OFF

RESETRESET

WIFI

To perform a reset to factory default use a pointed object to push the «RESET» button on the rear panel of your speaker.
The following settings will be deleted:

Ace Tx Ace Rx

Network settings (Connection to LAN/WLAN) WiSA connection (Connection to WiSA TV or

Tx speaker)

WiSA connection (Connection to Rx speaker)

IR remote tuning

Bluetooth setting (Pairing mode)

User Guide Ace Wireless // 26

15 FIRMWARE-UPDATE

To perform a rmware update, follow the steps below:

15.1 UPDATE YOUR RX

1. Disconnect your speakers from the power supply.

2. Save the new rmware on a memory stick.

3. Connect the memory stick to the USB «SERVICE» port.

4. Power your speakers.

5. The «PAIR» indicator lights up, ashing red throughout the entire update.

6. Speaker will reset and resume normal operation

Note: Make sure to save the new rmware to the top level of your memory stick and refrain from using subfolders.

15.2 UPDATE YOUR TX

Firmware updates are usually installed via Google Chromecast running automatically in the background. Alternatively, an update can be
started at any time through the web interface or via memorystick:

15.2.1 WEBINTERFACE UPDATE

1. Connect to your speaker and access the web interface.

2. On the web interface click on «Upgrade» in the «Firmware Upgrade» section.

3. Choose the rmware le (83_IMAGE_NETWORK) and press «Upgrade».

4. This process may take a few minutes.

5. You’ll nd the current software version in the section «Firmware Upgrade».

This version is updated upon successful installation.

Note: If your web browser won’t automatically reconnect after the software update, simply re-enter your speaker’s IP address in the
browser.

15.2.2 MEMORYSTICK UPDATE

1. Disconnect your speakers from the power supply.

2. Save the new rmware to a memory stick.

3. Connect the memory stick to the USB «SERVICE» input.

4. Supply your speakers with power.

5. Flip the Wireless Switch to "ON". For the update, the speaker must be started up to 100%, which can take up to 1 minute.

6. The «WIFI» indicator ashes red and blue during the entire update process.

Note: Be sure to save the rmware at the top level on your memory stick and do not use subfolders.

User Guide Ace Wireless // 27

16 SETUP INTERFACE FOR AUDIOPHILES

Ace

SERVICE

AUDIO OUT

AUDIO IN

ANALOG IN

Rx

SELECT

PAI R

LEFT

MONO

RIGHT

PAI R

SOUND

NEUTRAL
WAL L
SUB

WIRELESS

ON
OFF

RESET

The Ace Rx speakers are equipped with a balanced analog input (stereo).
The built-in RJ45 jacks allow for inexpensive and easy installation, and the signal
can be routed via standard CAT network cables. It is imperative to use shielded
cables and RJ45 plugs. The following graph provides an overview of the
pin assignment of the RJ45 connector.

User Guide Ace Wireless // 28

RJ45 Pin Input Polarity

12345678

12345678

GND

GND

12345678

12345678

GND

GND

RJ45 INPUT RJ45 OUTPUT

12345678

12345678

GND

GND

12345678

12345678

GND

GND

RJ45 INPUT RJ45 OUTPUT

12345678

12345678

GND

GND

12345678

12345678

GND

GND

RJ45 INPUT RJ45 OUTPUT

Rx Speaker Rx Speaker Rx Speaker

1 Balanced Analog Left +

2 Balanced Analog Left -

3 NOT connected

4 Balanced Analog Right -

5 Balanced Analog Right +

6 Ground GND

7 NOT connected

8 Ground GND

GND All GND

12345678

GND

12345678

GND

12

3

-

Analog

LEFT

+

12

3

-

Analog
RIGHT

The signal is internally routed from RJ45 «AUDIO IN» to RJ45 «AUDIO OUT».

Note: Make sure the «WIRELESS» switch is «OFF»: see WIRELESS ON/OFF

The stereo congurations, such as the setting of the «SOUND»switch, are also supported in this setup.
See STEREO CONFIGURATION.

+

12

+

3

-

NOT

connected

12

3

-

NOT

connected

+

User Guide Ace Wireless // 29

17 LED INDICATORS AT A GLANCE

LED indicator

LEFT MONO RIGHT PAIR Wi-Fi Function Description

ON OFF OFF – – Stereo

setting

OFF ON OFF – – Stereo

setting

OFF OFF ON – – Stereo

setting

– – – Flashing – WiSA The speakers connect to each other or to a

– – – ON – WiSA A connection between two speakers or

– – – – Flashing

green

– – – – ON green Wi-Fi Tx speaker is connected to LAN/WLAN.

OFF OFF OFF ON red OFF Mode Speaker is in stand-by mode.

3 × ON/
OFF

Flashing Flashing Flashing – IR remote IR remote ready for tuning.

Flashing OFF OFF – IR remote IR remote activating volume control «+».

OFF Flashing OFF – IR remote IR remote activating «Mute».

OFF OFF Flashing – IR remote IR remote activating volume control «-».

3 × ON/
OFF

3 × ON/
OFF

– Bluetooth Bluetooth pairing mode has been selected..

Wi-Fi Tx speaker searches/connects to LAN/

The left channel is active.

Mono (left + right) is active.

The right channel is active.

WiSA device.

speaker and WiSA device has been estab­lished.

WLAN.

User Guide Ace Wireless // 30

18 TECHNICAL DATA

Supported streaming protocols

Google Chromecast
Spotify connect
Roon Ready
DLNA
Bluetooth 4.2

Supported streaming protocols WiSA

WLAN standard IEEE 802.11a/b/g/n &802.11ac
Dual band 2.4GHz / 5.8GHz
Maximum resolution 192kHz (24Bit)

Wired inputs Wired inputs

Tx
Analog (Stereo) 48kHz / 24Bit
Optical/Coax (S/PDIF) 192kHz /24Bit
HDMI eARC

Supply

Voltage 100 – 240V 50/60Hz

Ace 50 Wireless Ace 30 Wireless Ace Center Wireless

Frequency response 30Hz – 25kHz 35Hz – 25kHz 35Hz – 25kHz

Amplier power @ <1% THD 200W 100W 100W

Maximum input power 250W 130W 130W

Equipping PIEGA AMT Tweeter

1 × 120mm MDS midrange
4 × 120mm MDS bass

Dimensions 105 × 14 × 16cm

Stand 25cm (Diameter)

Weight 14kg / 16kg (Alu / White

and Black)

Data rate 48 – 96kHz / 24Bit
Tx to Rx

Rx
Analog RCA 48kHz / 24Bit
Analog Stereo Balanced 48kHz / 24Bit

PIEGA AMT Tweeter
1 × 120mm

20 × 14 × 16cm 14 × 34 ×16cm

3.4kg 5kg

PIEGA AMT Tweeter
2 × 120mm

User Guide Ace Wireless // 31

19 DECLARATION OF CONFORMITY

PIEGA AMP speaker is in conformity with the following directives:
LVD:2014/35/EU
EMC:2014/30/EU
RED:2014/53/EU
ERP:2009/125/EU
ROHS:2011/65/EU
REACH:1907/2006/CE

STANDBY

After 60 minutes without any incoming music, the speaker will automatically go into a network
standby mode. This is indicated by a red light on operating status display, and the power
consumption goes down to 0.5 W. The speaker will automatically wake up upon receiving a
music signal, but we encourage you to completely turn off your speaker when not in use for an extended period of time.

User Guide Ace Wireless // 32