6DOF Motion Controller
Model: C1310
User Guide
Important Information:
• Be aware of your surrounding environment when product is in use.
• Do not cover or damage the senor in the top of this product.
• Prolonged use may cause dizziness; take regular breaks when needed. If
you feel seriously ill, please seek medical attention immediately.
Product Description:
Pico 6DOF Motion Controller is a Virtual Reality product which can track your
hands motion in the virtual environment. Note: It can be only used with Pico Neo
CV.
Operation Description:
Connection：
Be aware of the battery power before the product is in use
Wireless Connection：
Please operated according to the instruction after the Pico Neo CV is powered on：
a) Short Press the Home button, the blue led will be blinking when the product is
powered on;
The product will connect with Pico Neo CV automatically. And the blue led will
keep on after the connection.
Paring Mode：
Get into the paring mode if the controller does not connect with Pico Neo CV
automatically.
a) HMD Settings-> Controller Management and press “Paring”;
b) According to the instruction, make sure the controller is powered off, and long
press (4S) Home button and Trigger button at the same time. The blue and
red led will blink alternately after the controller getting into the paring mode;
c) The controller will connect with HMD automatically.
Charging Mode:
Red led blinking: It means low power, please charge the controller immediately.
The red led will keep in during the charging and be off after the charging
completely.
Power Off:
Long press the Home button till it vibrates to power off the controller. Meanwhile,
the red led will be on for 1.5S and then off.
Product Components:
Components Function
1.
2.
3.
4．
Touchpad
App button
Home button
Trigger button
• Direction operations
• Press for conforming
• Back the previous menu
• Short press for powering on
• Short press for returning to the
home screen when the
controller is powered on
• Long press for powering off
• Press for confirming or
shooting etc
Function Description
4．
5．
6
Volume button
Led indicator
USB-C
interface
• Adjust the volume up/down
• Power on: Blue light blinking
• Connection: Blue light keeps
on
• Paring mode: Red and blue
light blink alternately
• Low battery: Red light blinking
• Charging mode: Red light
keeps on
• Power off: Led off.
• Charging interface
Sensor
7.
Toxic and harmful substances declaration
Part name Toxic and Harmful Substances and Element
(Pb) (Hg) (Cd) (Cr6+) （PBB） （PBD
Structural
Component
Circuit
Modules
Battery × ○ ○ ○ ○ ○
○：Represents the content of toxic and harmful substances is with
the standard of SJ/T 11363-2006(Requirements of the
Limitation Standards for Poisonous and Harmful Material for
Electronic Products)
×：Represents the content of toxic and harmful substances is
beyond the standard of SJ/T 11363-2006.
× ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○
• Ultrasonic sensor
E）
radio interference, in which case the user may be required to take adequate
measures.
RF Exposure Information
This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation
of exposure of the general public to electromagnetic fields by way of health
protection.
The device complies with RF specifications when the device used in normal
condition.
Hereby, Pico Technology Co., Ltd. declares that this device is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU.
For “DECLARATION OF CONFORMITY” of “CE”, please see：
Doc Website: http://picovr.com/certifications/DOC_6DOFMotionController.pdf
Frequency Range：2400-2483.5MHz
Max Output Power：3.06dBm
Wireless Connection(2400-2483.5MHz): 5dBm，
HW Version：001
SW Version Format：
：In normal conditions, the product(without battery) will be
in usage without harming the environment for 10 years while the
battery can be in usage without harming the environment for 5
years.
EU REGULATORY CONFORMANCE
This is a class B product. In a domestic environment, this product may cause
RF01_Nordic_6DOFMotionController_svX.XX：X.XX: stands for the version of
mcu software, and it will be updated when some changes occur.
There are no restrictions of use.
Company Name: Pico Technology Co., Ltd.
Website: www.pico-interactive.com
Company Address: Room 2101，Shining Tower，No.35 Xueyuan Road, HaiDian
District, Beijing, P.R.China
Environmentally friendly disposal
Old electrical appliances must not be disposed of together
with the residual waste, but have to be disposed of
separately. The disposal at the communal collecting point via
private persons is for free. The owner of old appliances is
responsible to bring the appliances to these collecting points
or to similar collection points. With this little personal effort,
you contribute to recycle valuable raw materials and the
treatment of toxic substances.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
Loading...