Page 1
40-2150MHz 130dB EMI Satellite Splitters
www.picomacom.com
DISTRIBUTION
Passive Components
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free:800-421-6511 Fax: 818-493-4433
C-11
Rev. 12/02
TSPPS2150
Series
TruSpec’s TSPPS2150-series professional-commercial grade high frequency
satellite splitters are manufactured to precise performance specifications to provide low insertion loss, high isolation and return loss performance.These splitters are ideally suited for headends where satellite signals are split to multiple
receivers and used in both 950-1450 MHz satellite distribution systems and
stacked polarity 950-2150MHz satellite systems.DC power passes through all
ports for full flexibility in remote LNB powering applications.Our advanced printed
board circuitry ensures high-quality analog or digital signal transfer.Precision
machined F-port threads ensure easy connector installation and removal, and
improved port-to-connector interface.Internal seizing pins provide excellent connectivity to connector center lead. TSPPS2150 series splitters feature a solder-back
cover-plate to provide the highest possible EMI-RFI shielding >-130dB eliminating signal ingress and providing a full environmental seal.A yellow-chromate coating over a
zinc-alloy diecast housing ensures excellent corrosion resistance. Each
TSPPS2150 splitter is fully tested at the factory to fully comply with precise quality
standards.
TSPPS2150 Series
40-2150MHz 130dB EMI Satellite Splitters
High frequency broadband
range 40-2150MHz L-Band
suitable for analog and digital
satellite applications
DC power passage to all ports
provides for remote LNB-powering applications and powering the antenna preamplifier
directly from the headend
Solder-back cover-plate provides maximum EMI-RFI
shielding >-130dB eliminating
signal ingress to guarantee
distortion free pictures
Tin-plated zinc-alloy diecast
housing ensures excellent
ground bonding and long corrosion-free service life in
indoor/outdoor applications
High-performance printed
board circuitry provides low
intermodulation distortion to
ensure excellent digital
performance
1-inch centered 1/2˝ long precision machined F-connector
threads ensure improved portto-connector interface and
accommodate external security
devices
Internal seizing pins provide
improved connectivity to connector center lead
Mounting tabs with provided
mounting screws enables easy
installation
Cast-in integrated ground
block with convenient mounting screws enables easy and
cost-effective installations
TSPPS-2150-2
TSPPS-2150-4
Page 2
TSPPS2150 Series
Product Specifications
40-2150MHz 130dB EMI Satellite Splitters
TSPPS-2150-2
TSPPS-2150-4
TSPPS-2150-2 2-Port Splitter
TSPPS-2150-4 4-Port Splitter
Ordering Information
TSPPS-2150-2
Insertion Loss (In-Out) : 4.2dB Typical Trace A
Return Loss (Output): 16dB Typical
Isolation (Out-Out): 29dB Typical
Dimensions: 2.3˝ (L) x 1.9˝ (W) x 0.6˝(H)
TSPPS-2150-4
Insertion Loss (In-Out): 8.3dB Typical Trace B
Return Loss (Output): 12dB Typical
Isolation (Out-Out): 21dB Typical
Dimensions: 3.0˝(L) x 1.9˝(W) x 0.6˝(H)
Specifications
INSERTION LOSS Typical
www.picomacom.com
C-12
Rev. 12/02
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free:800-421-6511 Fax: 818-493-4433
Specifications Subject to Change © Copyright 2003 Pico Macom, Inc.
INPUT
TRU SPEC
TSPPS-2150-2
40-2150MHz
OUT OUT
OUT OUT
TRU SPEC
OUT
INPUT
TSPPS-2150-4
40-2150 MHz
OUT
1:Transmission Log Mag 1.0 dB/ Ref -3.00 dB C
dB
0
-1
-2
-3:
-4
-5
-6
-7
-8
Start 40.000 Mhz Stop 2150 Mhz
Meas1: Mkr1 40.000 Mhz
-3.531 db
A
B
Loading...