Page 1
Blood Pressure Monitor
Page 2
1
Page 3
2 3
Moderate Hypertension (Grade 2)
Severe Hypertension (Grade 3)
180
Systolic Blood Pressure
Blood Pressure
Classification
130120
Optimal
Normal
High-Normal
Mild Hypertension (Grade 1)
140 160
Diastolic Blood Pressure
85
90
00
10
80
Page 4
4 5
press
artery
vein
blood discharging
Systolic
relax
blood entering
Diastolic
(Case:
Male, 35 years old)
WakeupArrive
office
Leave
office
Dinner
/ Sleep
Telephone
Discussion
Argument
in a meeting
18:00
Midnight
12:00
6:00
50
100
150
mmHg
Systolic
Diastolic
Page 5
6 7
IND E X
Arm Cuff
Air Connector Plug
(connects to Air socket)
Air tube
LCD Display
MEMORY Recall
M 1
START/POWER
(on/off)
Air Socket
(insert Air
connector
plug here)
AC Adapter Port
MEMORY Recall
M 2
MODE
Systolic Pressure
Diastolic Pressure
Pulse Rate
Heartbeat
Inflation/Deflation
Low Battery
Irregular Heart Beat
Memory Symbol
Memory Sets
Blood Pressure Classification
Date
Time
Average Measurement
Alarm Clock
Unit of Measurement
Unit of Measurement
Unit of Measurement
AC Power Adapter (not included)
Adapter polarity:
Input: AC 100~240V 60Hz
Output: DC 6V 1.0A
AC Adapter Port
AC Power Adapter
(not included)
Page 6
8 9
Press the
“M2” button
Date
Press the
“M2” button
Press the
“M2” button
Press the
“M2” button
Minute Temperature
Month
Load
Batteries
Press the
“M2” button
Year
Hour
Press the
“M1” button
Press the
“M2” button
Temperature
Page 7
10 11
Main Artery
Page 8
12 13
INDEX
Page 9
14 15
Page 10
16 17
Press the
“MEMORY Recall”
button "M1"
Press the
“MEMORY Recall”
button "M2"
PROBLEM CAUSE SOLUTION
Nothing appears
in the display even
when the power
is turned on.
Batteries are drained.
Batteries are improperly installed.
Replace all batteries
with new ones.
Reinsert batteries in
the correct position.
Low Battery
Symbol appears.
Batteries are drained.
In colder temperatures batteries have
weaker electrical charges.
Replace all batteries
with new ones.
Use the device in a
warmer setting.
Device operation
time is
inconsistent.
Different battery brands have different
life spans.
Use Alkaline batteries and
replace all batteries at the
same time with same brand
batteries.
No reading after
measurement.
Batteries are drained. Replace all batteries
with new ones.
Unusual blood
pressure results.
Perhaps the cuff was improperly
positioned.
Blood pressure naturally varies
throughout the day.
Adjust patient and arm
cuff to measure.
Rest a while, relax and
measure again.
Unusual heart
rate results.
Bodily movement during device use.
Measurement shortly after exercise or
exposure to the outdoors.
Refrain from moving during
measurement.
Do not take measurements
after exercise or coming
back from the outdoors.
Power switches off
automatically.
More than 2 minutes have passed
since last operation.
Push the power button again,
and then begin measure
again.
During measuring,
air re-inflates.
It could be a normal action if the user’s
blood pressure is higher than the initial
pressure value, the device automatically
pumps to a higher pressure by 40 mmHg
each time.
The arm cuff is not fastened properly.
Relax, and try to take
a measure again.
Check that the arm cuff is
fastened properly and retake
the measurement.
Page 11
18 19
ERR
CODE
MEANING CORRECTIVE ACTION
Err 0 Little or no pulse detected. Take off heavy clothes and retry again.
Err 1 Leakage in cuff pressure/Inflation
too low.
The wrist cuff is not fastened properly.
Reapply the cuff, and take a
measurement again.
Err 2 Pressure fault. Rest a while, relax and retry again.
Err 3 Deflation fault.
The cuff is not fastened properly. Reapply the
cuff, and take a measurement again.
Err Memory error. Take off batteries to reboot the device,
then take another measurement.
Low batteries. Replace all batteries with new ones.
Page 12
20 21
10
°
40
°
10
°
40
°
20
°
50
°
Page 13
Loading...