CALL is the PUZZLE system’s sound alerting device. A sound signal is sent by CALL’s speaker
when an alarm from one of the PUZZLE system’s alerting transmitters (DETECT and/orOBSERVER) is received. CALL can receive up to seven different alarms, apart from the alarm for
battery change. Each alarm has its own unique sound, which makes it easier to distinguish
between the different alarm signals. The individual sounds are selected on the alerting
transmitter (DETECT and/or OBSERVER).
1
ALL features
C
English
1 12V AC/DC connection
To connect 12volt
power transformer
2 volume control
To adjust volume level
3 channel tuner
To select personal code
4 tone control
To select frequency
5 indicator light
Shows that power is on
6 speaker
Sounds signal received
from other PUZZLE units
1234
back
5
6
front
7 power transformer
Supplies power to C
8 screwdriver
Used to set personal code
and frequency
8
ALL
unit
7
2
ALL accessories
C
9 table stand
Allows CALL unit to be placed
on a table or other flat surface
10 wall bracket
Allows CALL unit to be
mounted on the wall
(available separately)
9
11 back plate
To be used with the table stand
and the wall bracket
10
11
3
ALL instructions
C
positioning CALL unit
1a
We recommend that you install
CALL in the room you use
most often.
C
ALL can either be hung on a wall
or used with its table stand (sold
separately) and remain portable.
English
positioning CALL unit
1b
CALL can be affixed to the wall
with Velcro tape, a screw, or a
wall bracket (sold separately).
4
ALL instructions
C
connecting transformer
2
1
2
The cable from the
1
enclosed transformer is
inserted into the socket
marked 12V AC/DC on
the back of CALL.
The transformer should
2
then be connected to the
wall socket, and the wall
contact switched on.
select personal code
3
When C
correctly, the red light on
the front of CALL should
come on.
The personal code is selected
using the tuner marked
Channel on the back of CALL.
NOTE: The P
different transmitters and
receivers should be set to the
same personal code.
ALL is installed
system’s
UZZLE
NOTE: Use the screwdriver
included with CALL to turn dial
to desired setting.
The sound signal should be set to the
frequency that the user hears best.
If you already know that frequency,
follow the scheme on the left.
If you do not know the frequency,
try listening to each of the 16
frequencies until you find the
one you hear best.
The frequency is selected by
using the tuner marked Tone
on the back of C
NOTE: Use the screwdriver
included with CALL to turn dial
to desired setting.
ALL.
English
set the volume
5
CALL’s volume should be adjusted
to best suit the user’s needs.
The volume control is marked
Volume on the back of C
Turn the control clockwise to
increase the volume, and counterclockwise to decrease it.
ALL.
6
troubleshooting
Should your CALL unit not function satisfactorily, please check the list below:
The red light on the front of CALL unit does not light
• Check to see that the wall switch it turned on.
•
Switch off the wall contact for 10 seconds and then switch it back on again.
The red light on the front of CALL lights, but you cannot hear a signal
when one of the PUZZLE system’s alerting transmitters is activated
Check that the volume is set correctly. See 5 .
•
• Check that the personal code on C
the same. See 3 .
CALL emits an alarm without apparent reason
• Change the personal code using the tuner marked Channel on the back of C
See 3 .
If you still have trouble after trying the ideas above please contact your local authorized
PhonicEar Logia dealer/installer (see information on back cover).
and the P
ALL
systems’ alerting transmitters are
UZZLE
ALL.
test and approval
CALL is approved and CE marked in accordance with the R&TTE directive.
7
warranty
A one-year limited warranty is issued to the original consumer of this product(s) by PhonicEar Logia.
time period of warranty
This warranty will go into effect upon the date of original purchase of this equipment, and will remain in effect
for one calendar year from that date as long as the instrument remains the property of the original consumer.
what is covered by this warranty
Any electronic component which, because of workmanship, manufacturing, or design defects, fails to function properly under normal use during the life of this warranty will be replaced or repaired at no charge for
parts or labor when returned to the factory service center. Transportation in is paid by the customer. If it is
determined that repair is not feasible, the entire unit may be replaced with an equivalent unit upon
mutual agreement of the manufacturer and customer.
what is not covered by this warranty
This one-year limited warranty does not apply to:
1 Malfunctions resulting from abuse, neglect, or accident.
2 Peripheral accessories as itemized within the product brochure, when such items are returned after 90 days from
the original purchase.
3 Alkaline batteries (if applicable).
4 Instruments connected, installed, used, or adjusted in a manner contrary to instructions provided
by the manufacturer.
5 Consequential damages and damages resulting from delay or loss of this instrument. The exclusive
remedy under this warranty is strictly limited to repair or replacement as herein provided.
6 Products damaged in transit unless investigated by the shipper and returned to the warrantor with the
investigation report.
English
PhonicEar Logia reserves the right to make changes in the design or construction of any of its instruments
at any time without incurring any obligation to make any changes whatsoever on units previously
purchased. This warranty is in lieu of all other expressed warranties. All expressed and implied warranties
will terminate upon the expiration of this written warranty. No representative or person is authorized to
represent or assume for us any liability in connection with the sale or use of our products other than as set
forth above.
The above warranty does not affect any legal rights that you might have under applicable national legislation governing sale of consumer goods. Your distributor may have issued a warranty that goes beyond the
clauses of this limited warranty. Please consult your distributor for further information.
what to do if you need service
If you require service under the terms of this warranty, carefully package the instrument to prevent damage and return it to your distributor (see information on back cover). Please provide your receipt, a detailed
description of the problem, your full name, billing address, and telephone number.
8
Your local dealer:
europe: +45 3917 7101 • germany (kostenlose Rufnummer): 0800/1844736
u.s.: 800.227.0735, then press 7 • canada: 800.263.8700
other regions: Call your local PhonicEar Logia dealer • website: www.phonicearlogia.com