microphone user guide
■■ AT0655 behind-the-neck boom mic
■■ AT0655M behind-the-neck boom mic with mute
■■ AT0655R behind-the-neck boom mic for Radium
■■ AT0513 over-the-head boom mic
■■ AT0795-L infrared lapel mic
■■ AT0814 earhook mic
■■ AT0814M earhook mic with mute
■■ AT0816 FM collar mic
■■ AT0817 infrared collar mic
■■ AT0720 conference mic
■■ AT0164-L omni-directional lapel mic
■■ AT0667-L omni-directional lapel mic
■■ AT0291-L directional lapel mic
■■ AT0668-L directional lapel mic
for all Phonic Ear microphones
AT0655/AT0655M/AT0655R
behind-the-neck boom mic
The AT0655 boom microphone is a lightweight, noise-canceling
microphone worn on the head. It is used in very noisy environments or with a sound field system.
Key
Small
Clip
LEFT EAR
Clip
Red band visible
Insert plug
into transmitter
Mic/Ant jack
White dot
faces mouth
2.5cm – 4cm
(1 in – 1.5 in)
1
2
3
4
5
6
MIC ON: Button down
MIC MUTED: Button up
and red band is visible
Press and release button to enable/disable
mute function (AT0655M only).
Flexible
Gooseneck
Bend headband to suit head size
If you have the mute feature:
AT0513 over-the-head boom mic
The AT0513 boom microphone is a lightweight, noise-canceling
microphone worn on the head. It is used in very noisy environments
or with a sound field system.
1
2
3 4
5
Insert plug into
transmitter
Mic/Ant jack
RIGHT EAR
Adjust earphone and headpad to fit
comfortably over head
Earpad
Headpad
Microphone
Arm
2.5cm – 4cm
(1 in – 1.5 in)
AT0795-L infrared lapel mic
The AT0795-L infrared lapel microphone is a lightweight, noisecanceling microphone worn around the neck. It is used with the
V
OCALIGHT sound field system.
1
2
3 4
5
Insert plug into
transmitter
Mic/Ant jack
Slide metal clip
on back of lapel
mic through
holes on plastic
lavalier holder
Lavalier
Mic plug
Microphone
20cm
(8 in)
Plastic lavalier
holder
Place lavalier
around neck and
slide microphone
up or down to
adjust position
AT0814/AT0814M earhook mic
The AT0814 boom microphone is a lightweight, noise-canceling
microphone worn over the ear. It can be used with S
OLARIS, SPRITE,
or E
ASY LISTENER transmitters.
1
2
3
4
Insert plug into
transmitter
Mic/Ant jack
Pull earpiece forward and place earhook over ear
Ear piece
Microphone
Mic
plug
Clip
Push earpiece back to secure earhook to ear
Red band visible
5
MIC ON: Button down
MIC MUTED: Button up
and red band is visible
Press and release button to enable/disable
mute function (AT0814M only).
Use clip to secure
cord to clothing
Mute Switch
(AT0814M only)
The collar microphone is a lightweight, noise-canceling microphone
worn around the neck. It is used in very noisy environments or with
a sound field system.
Microphone
Red band visible
Insert plug into
transmitter Mic/Ant jack
1
4
MIC ON: Button down
MIC MUTED: Button up
and red band is visible
Press and release button to enable/disable
mute function (FM collar mic only).
Mute
Switch
AT0816/AT0817 collar mic
(check for availability)
Mic plug
FM mic
(AT0816)
Infrared mic
(AT0817)
Mic plug
Microphone
Clip
Infrared
Emitter
Place collar mic
around neck and
cross over to secure
around neck.
Place mic against
chin to help align
mic with mouth
2
3
5cm– 10cm
(2in – 4in)
FM mic
Push down on clip, slide
along cord to adjust position, then clip to clothing
Clip
The conference microphone is a small, unobtrusive omni-directional
condenser microphone. It is designed for communication in meetings,
round table discussions, or split-table communications.
AT0720 conference mic
1
2
3
4
Connect
microphone
to transmitter
(MIC or
MIC/ANT jack)
AT0720
PE 300T, 571T, 471T
or 481FST
AT0720
AT0720
For range greater than 3m/10ft, use the
AT0721 y-cord to use two conference mics
AT0721
PE 300T, 571T, 471T
or 481FST
Straighten cord
5
Turn transmitter power
switch to MIC/AUX
MIC/AUX
Place conference mic on any hard, smooth,
bare surface such as:
3m/10ft
Tabletop
(no tablecloth)
Dinner plate
Driver’s license
© 2003 Phonic Ear Inc. Phonic Ear and the names of Phonic Ear products are 821-7325-101/Rev. E/3710 0703
trademarks or registered trademarks of Phonic Ear Inc. in the U.S. and other countries.
u.s.: 800.227.0735, then press 5 • canada: 800.263.8700
outside u.s./canada: Call your local Phonic Ear dealer • website: www.phonicear.com
AT0291-L & AT0668-L directional lapel mics
AT0164-L & AT0667-L omni-directional lapel mics
Loop lavalier around
neck and clip to mic or
clip mic to clothing
Loop lavalier around
neck and clip to mic or
clip mic to clothing
Loop lavalier around
neck and clip to mic or
clip mic to clothing
* No windscreen with AT0164-L omni-directional mic
The AT0291-L and AT0668-L directional lapel microphones and the
AT0164-L and AT0667-L omni-directional lapel microphones are small,
lightweight microphones with a windscreen*, clip, and lavalier cord for use
with FM transmitters. To reduce the chance of feedback, avoid using omnidirectional lapel microphones with a sound field system. In noisy environments,
choose a directional microphone.
1
directional lapel mics
AT0291-L AT0668-L
omni-directional lapel mics
AT0164-L AT0667-L
Windscreen
Thread lavalier through
holes on clip and place
around neck
Lavalier
Cord
Clip
Mic
1
1 1
2
Mic
Lavalier
Cord
Clip
Windscreen
(optional)
Mic
Lavalier
Cord
or or or
Clip
Lavalier
Cord
Clip
Windscreen
(optional)
Mic
2
2
2
Loading...