JUBI SERIES
Professional Active Loudspeakers
JUBI 12AR |
JUBI 15AR |
12" Active Loudspeaker |
15" Active Loudspeaker |
with Recording / Playback |
with Recording / Playback |
Features
4Remarkable sound, remarkable power, and remarkable style in a lightweight, durable enclosure
4700 Watts of continuous power using Class D technology 412" or 15" woofer matched with 1" compression tweeter 4Flat frequency response between 53/56Hz and 20kHz
42 channel onboard mixer: mic channel featuring an XLR input and line channel with 1/4" TRS phone jack
4Record audio directly to USB flash drives
4Digital MP3 audio playback from USB flash drives
4Send speaker's main signal off to additional speakers or amplifiers through a balanced XLR output connector
4126 dB maximum sound pressure level
44th order phase-accurate Linkwitz-Riley crossover 435mm pole mount for extended audience reach 4Impact resistant polymer enclosure with internal bracings 4Tour grade steel grille (1.2 mm)
4Rotary EQ controls for high and low frequency audio
Overview
Phonic’s Jubi 12AR and Jubi 15AR establish a new paradigm for molded powered speakers. Jubi’s 700 Watt (continuous) amplifier uses Class D technology to produce a shattering 126 dB maximum SPL, providing enough power for a wide range of venue types and sizes. A lightweight design and rugged pole mounts make the Jubi the most versatile, portable active loudspeaker today. Phonic engineers designed a high BL force factor woofer and a 1" compression tweeter to achieve the Jubi’s astonishingly wide sound stage and a vivid, transparent signature sound. A carefully crafted polymer enclosure with stunning vertical curvatures not only look great, but also improve acoustic accuracy by minimizing internal diffraction. Finally, reliability and durability were the paramount factor throughout the Jubi’s development. With 700 Watts of ground shaking power, a 2-channel on-board mixer, custom engineered transducers, and incredible versatility, the Phonic Jubi 12AR and Jubi 15AR are loudspeakers to be reckoned with.
Woofers and Tweeters Engineered Right
Unlike many other speaker manufactures that use pre-assembled OEM woofers and tweeters, Jubi transducers are designed from scratch, in-house, by Phonic. Everything, from the cone pulp formula and the curvature of the tweeter’s titanium membrane to the characteristic of the magnetic field, is uniquely Phonic, uniquely Jubi. Jubi’s state-of-the-art 12" and 15" woofers has a distinctly high BL force factor and a long-throw extension which produce marvelously deep and defined bass traditionally unattainable in small enclosures. The 1" compression tweeter and 95 degree conical horn complete the Jubi’s vivid, transparent sound signature.
Advanced Electronics. Advanced Reliability
With over 35 years of experience, Phonic has few equals when it comes to advanced electrical engineering technology. With the Jubi series, this cumulated expertise is on display. Core features include:
4Time alignment and phase correction: In listening tests, many notice that the Jubi seems more “real” or more “live” than other speakers. This is because Phonic’s active electronics ensure that sounds from the Jubi hit listeners’ ears at the precise moments the original recording intended.
4High Dampening Factor and Woofer Stabilization: The Jubi has a high amplifier dampening factor to ensure that the woofer reaches optimal excursion. Additionally, Phonic engineers added circuitry to manage the speaker’s electrical feedback, in effect, stabilizing woofer movement. The high amplifier dampening factor and stabilization circuitry give the Jubi its spectacular bass depth and clarity.
4Transducer Protection: Active electronics oversee tweeter and woofer excursion, preventing audio artifacts, distortion, and speaker damage.
44th order, phase-accurate, Linkwitz-Riley crossover
4Thermal protection: Precautionary feature that cuts off the Jubi in case of overheating.
With experience and technology comes excellent performance and reliability. But you can never be too careful. As of the launch date, the Jubi has logged more than 1000 hours of real world and lab tests, guaranteeing a remarkable level of reliability. From heated ovens, freezing subzero rooms, high humidity chambers, to electrical voltage spikes, the Jubi has endured it all.
Information in this document is subject to change without notice. |
Page 1 |
||
|
|
|
|
JUBI Series Data Sheet 06/30/2015 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear Panel Features
JUBI SERIES
Professional Active Loudspeakers
Record audio and playback MP3 files from
USB flash drives
Mic Input through XLR connector
Line Input through balanced TRS connector
High Frequency EQ Control set at 12kHz
Balanced XLR output for extended application
Low Frequency EQ Control set at 80 Hz
Standard AC power receptacle
Activate the Jubi AR at the flick of a switch
Specifications
|
|
Jubi 12AR |
Jubi 15AR |
|||
|
Amp Type |
Tweeter: Class AB / Woofer: Class D |
Tweeter: Class AB / Woofer: Class D |
|||
|
Continuous Power |
700 Watts |
700 Watts |
|||
|
Peak Power |
1400 Watts |
1400 Watts |
|||
|
Minimum THD |
0.01% |
0.01% |
|
|
|
|
Maximum SPL |
126 dB |
126 dB |
|||
|
Frequency Response |
56 Hz - 20 kHz |
53 Hz - 20 kHz |
|||
|
LF Size |
12'' |
15'' |
|
|
|
|
LF-Magnet Material |
Ferrite |
Ferrite |
|||
|
LF-VC Diameter |
2.6 inch |
2.6 inch |
|||
|
HF-Diaphragm Size and Material |
1'' Titanium |
1'' Titanium |
|||
|
HF-Magnet Material |
Ferrite |
Ferrite |
|||
|
Horn Coverage Pattern |
95 degree |
95 degree |
|||
|
Input Connectors |
XLR & 1/4" TRS |
XLR & 1/4" TRS |
|||
|
Output Connectors |
XLR |
XLR |
|||
|
EQ |
High (12kHz) / Low (80Hz) |
High (12kHz) / Low (80Hz) |
|||
|
Crossover Type |
Precisely tuned crossover |
Precisely tuned crossover |
|||
|
MP3 Audio |
USB (Record + Playback) |
USB (Record + Playback) |
|||
|
LED Indicators |
Power / Clip |
Power / Clip |
|||
|
Enclosure Material |
Polymer |
Polymer |
|||
|
Grille Gauge |
1.2 mm |
1.2 mm |
|||
|
Handle Material / Positions |
2 on sides |
2 on sides |
|||
|
Monitor position |
Yes - Two sides |
Yes - Two sides |
|||
|
Suspension / Mounting |
Stand mounting with 35mm pole socket |
Stand mounting with 35mm pole socket |
|||
|
Dimensions (HxWxD) |
559 x 370 x 277 mm (22" x 14.56" x 10.9") |
679 x 450 x 345 mm (26.73" x 17.71" x 13.58") |
|||
|
Net Weight |
14.5 kg (32 lbs) |
16.7 kg (36.8 lbs) |
|||
Information in this document is subject to change without notice. |
|
Page 2 |
||||
|
|
|
|
|
|
|
JUBI Series Data Sheet 06/30/2015 |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|