FreeCom 7100
Ultra-light aviation headset with
professional hearing protection
Manufactured by Phonak Communications AG
Länggasse 17, 3280 Murten, Switzerland
Phone +41 (0) 26 672 96 72
FreeCom 7100
Ultraleichtes Piloten-Headset mit
professionellem Gehörschutz
Hergestellt von Phonak Communications AG
Länggasse 17, 3280 Murten, Schweiz
Telefon +41 (0) 26 672 96 72
FreeCom 7100
Headset d'aviation ultra-léger avec
protection auditive professionelle
Produit par Phonak Communications SA
Länggasse 17, 3280 Morat, Suisse
Tél. +41 (0) 26 672 96 72
User Guide
Gebrauchsanweisung
Mode d'emploi
Thank you for choosing a FreeCom aviation headset by Phonak, the world's leading hearing
healthcare company. All Phonak FreeComs are designed to o er a comfortable in-ear t while
at the same time allowing excellent speech intelligibility and crystal clear voice transmission.
Danke, dass Sie sich für ein FreeCom Aviation Headset von Phonak, dem weltweit führenden
Hörgerätehersteller, entschieden haben. Alle Phonak FreeCom Systeme bieten einen
komfortablen Sitz im Ohr, während sie gleichzeitig eine exzellente Sprachverständlichkeit und
kristallklare Stimmübertragung ermöglichen.
Merci d’avoir choisi le headset d’aviation FreeCom de Phonak, leader mondial de la protection
auditive. Tous les FreeCom de Phonak sont conçus pour s’adapter confortablement aux oreilles,
tout en o rant une excellente intelligibilité et une transmission de la voix très claire.
Liberate your ears!
4
Ear mold for right ear with red marking
Ear mold for left ear with blue marking
earJack™ adapter (incl. ambient microphone and in-ear speaker)
Connectors with safety break point.
Allow to put the microphone on the right or on the left side
Ambient sound ON/OFF Switch (short press)
Ambient sound volume control mode (long press)
Battery door and ON/OFF switch
Intercom Volume Control +/Ambient sound Volume Control +/-
QD connector
Boom microphone. Microphone sound inlet to be placed
always parallel to the mouth.
5
A EarJack
TM
adapter 6
9
10
14
B Boom Microphone
C Control Box
D Connectors
E Important informations 16
F Technical Data 17
G Troubleshooting 21
H Miscellaneous 24
6
A EarJackTM adapter (incl. ear molds, ambient microphone and in-ear speaker)
A1 To attach the earJack
u Attach the ear molds to the earJack™ adapters by first hooking the lower hinge of the
earJack™ adapter into the mold (Fig 1), then pushing the upper part firmly into the mold
until it clicks (Fig 2). By correctly connecting these, you will ensure a tight seal and proper
operation of the headset’s hearing protection.
A2 To insert ear molds in the ears
u The ear mold marked
red is for your right ear, the ear mold marked blue is for your left ear.
u Place the neckloop over your head and insert the ear mold into your outer ear with the
opening pointing into your ear canal (Fig 3).
u Twist the ear mold slightly to insert it fully into your ear (Fig 4). Ensure that the ear molds
are well inserted and locked in the concha (Fig 5). Press softly on the earjack to remove the
remaining air in the ear channel and ensure a good seal.
Fig 1 Fig 2
7
A3 To remove the earjack from the ear
u Hold the ear mold by the earjack adapter and withdraw carefully from the ear, using a slight
upward movement to avoid a rapid pressure drop.
A EarJackTM adapter
Fig 3 Fig 4 Fig 5
Regularly adjust the air pressure within the ear by breaking the seal between the
ear-channel and the ear-shells (for example by making jaw movements)
8
A EarJackTM adapter
Fig 7 Fig 8
Fig 6
A4 To attach windscreens to the earJacks
u When using FreeCom 7100 outdoors, snap-on foam windscreens significantly reduce the
wind noise generated by turbulence around the microphones located on each earJack™
adapter (Fig 6).
u When attaching these windscreens, ensure that the snappers are inserted precisely into both
slots on the adapter (Fig 6).
A5 To maintain the system
u Remove the earJack™ adapter from the ear mold by pressing the snap lock springs together
(Fig 7) and withdrawing the adapter, starting at the top (Fig 8).
u Clean and disinfect the ear molds with soap and water. Never use water or other liquids to
clean the earJack™. Let ear molds dry fully before use.
9
B Boom Microphone
Fig 9 Fig 10
Fig 11
B1 To place the boom microphone
u Adjust the boom microphone to sit within 1 cm of your mouth, close to your upper lip.
u Ensure that the microphone sound inlet, marked with a white dot points towards your
mouth (Fig 9) to avoid any twisting of the boom microphone.
u The boom microphone sound inlet has to be placed always parallel to the mouth (Fig 9).
u The boom microphone can be placed on the left or on the right side (Fig 10).
B2 To use / mount / remove the windscreen
u To keep the windscreen in position, the boom microphone is equipped with a Velcro
part (Fig 11).
u To mount the windscreen to, or remove it from, the boom microphone, lift the windscreen
over the Velcro part and pull it on or remove it from the microphone (Fig 11).
Loading...