Phoenix Gold XS2300 blk User Manual

XS2300 blk

Features

• Defeatable 18dB per octave highpass or lowpass crossover, adjustable from 40 to 800Hz.

• Auxiliary output to send lowpass or highpass signal to an additional amplifier.

• LPL ready, allows the use of an optional LPL44 Lowpass Level control to adjust subwoofer volume.

• Hi-level input capability for easy integration with most factory headunits.

• Tri-Linear™ capability allows simultaneous stereo and bridged mono operation.

• Adjustable TwinT™ bass equalization with +18dB of boost centered at 45Hz.

• 2 ohms bridged / 1 ohm stereo approved.

• Advanced muting circuitry eliminates turn-on and turn-off noises.

• Advanced thermal and overload protection.

• 2 layer, 2 ounce, copper G10 glass-epoxy printed circuit boards.

• Power-on LED indicator.

• Audiophile grade metal film capacitors and 1% metal film resistors.

• PWM Mosfet power supply.

• Gold plated power and speaker terminals.

• Glass filled nylon isolation mounting feet.

• Gold plated signal input and output jacks.

• XS linkable using the optional XS link to connect multiple amplifiers together.

* For complete manuals, technical tips, FAQ’s, system diagrams and new product information visit us @

XS2300 blk Amplifier

Specifications

Continuous Output Power at 1% THD (watts):

XS2300 blk

Into 4 ohms Stereo @ 12.5 Vdc

Into 4 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . . .75 x 2

Into 2 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .150 x 2

Into 4 ohms Bridged @ 14.4 Vdc . . . . . . . . . . . . . .300 x 1

Continuous Current Draw @ Full Power * . . . . . . .30 amps

Peak Current Draw @ Full Power ** . . . . . . . . . . . .50 amps

Recommended Fuse Size . . . . . . . . . . . . . .30A ATO style

Chassis Dimensions . . . . . . . . . . . .7.75L x 9.25W x 2.00H

Overall Dimensions . . . . . . . . . . . . .9.10L x 9.25W x 2.10H

* Average continuous current draw when playing typical music material.
** Average peak current draw needed for musical peaks (less than 20

milliseconds) when playing typical music material.

Frequency Response . . . . . . . . . . . .±1dB, 20Hz to 20kHz

Signal to Noise Ratio (A-weighted) . . . . . . . . . . . . .>100dB

Input Sens. (Line-level inputs) . . . . .100 millivolts to 3 volts

Input Sens. (Hi-level inputs) . . . . . . .1.75 watts to 35 watts

Crossover Frequency . . . . . . . . . . . . . . . . . . .40 to 800Hz

Crossover Slope . . . . . . . . . . . . . . . . . . . .18dB per octave

Bass Boost . . . . . . . . . . . . . . . . . . . . .0 to +18dB @ 45Hz

DC Input Voltage Range . . . . . . . . . .10 volts to 15.5 volts

Typical Current Draw at Idle . . . . . . . . . . . . . . . . .<2 amps

Minimum Bridged Load Impedance . . . . . . . . . . . .2 ohms

Minimum Stereo Load Impedance . . . . . . . . . . . . . .1 ohm

Due to ongoing research and development, features,

specifications and availability are subject to change without notice.

(IASCA/USAC)

. . . . . . .25 x 2

Limited Warranty

Phoenix Gold International, Inc. (or "Phoenix Gold")
warrants its products against defects in materials and
workmanship for a limited period of time.
For a period of one (1) year from date of original purchase,
we will repair or replace the electronic product, at our option,
without charge for parts and labor. The limited warranty
period is EXTENDED to three (3) years from date of original
purchase if the product was originally installed by an
authorized Phoenix Gold electronics dealer and accompanied
by a valid sales receipt showing a charge for installation.
Customer must pay all parts and labor charges after the
limited warranty period expires. The limited warranty period
for factory refurbished products expires after ninety (90) days
from date of original purchase. This limited warranty applies
only to purchases from authorized Phoenix Gold
Electronics/Speaker retailers.

This limited warranty is extended only to the original
purchaser and is valid only to consumers in the United
States. Consumers are required to provide a copy of the
original sales invoice from an authorized Phoenix Gold dealer
when making a claim against this limited warranty. This
limited warranty only covers failures due to defects in
materials or workmanship that occur during normal use. It
does not cover failures resulting from accident, misuse,
abuse, neglect, mishandling, misapplication, alteration, faulty
installation, modification, service by anyone other than
Phoenix Gold, or damage that is attributable to Acts of God.
It does not cover costs of transportation to Phoenix Gold or
damage in transit.

This warranty will become void if the serial number
identification has been wholly or partially removed, altered or
erased. Repair or replacement under the terms of this
warranty does not extend the terms of this warranty.
Should a product prove to be defective in workmanship or
material, the consumer's sole remedies will be repair or
replacement as provided under the terms of this warranty.
Under no circumstances shall Phoenix Gold be liable for loss
or damage, direct, consequential or incidental, arising out of
the use of or inability to use the product. There are no
express warranties other than described above.

PHOENIX GOLD INTERNATIONAL

9300 North Decatur

Portland, OR 97203

Tel: [phone]

F ax: 503.978.3380

w w w .phoenixgold.com

8100.0184A